]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/platinum.h
env: Use tabs in ENV_IS_IN_FAT
[people/ms/u-boot.git] / include / configs / platinum.h
1 /*
2 * Copyright (C) 2014, Barco (www.barco.com)
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7 #ifndef __PLATINUM_CONFIG_H__
8 #define __PLATINUM_CONFIG_H__
9
10 /* SPL */
11
12 /* Location in NAND to read U-Boot from */
13 #define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * 1024 * 1024)
14
15 #include "imx6_spl.h" /* common IMX6 SPL configuration */
16 #include "mx6_common.h"
17
18 /*
19 * Hardware configuration
20 */
21
22 /* UART config */
23 #define CONFIG_MXC_UART
24 #define CONFIG_MXC_UART_BASE UART1_BASE
25
26 /* I2C config */
27 #define CONFIG_SYS_I2C
28 #define CONFIG_SYS_I2C_MXC
29 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
30 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
31 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
32 #define CONFIG_SYS_I2C_SPEED 100000
33
34 /* MMC config */
35 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
36 #define CONFIG_SYS_FSL_USDHC_NUM 1
37
38 /* Ethernet config */
39 #define CONFIG_FEC_MXC
40 #define CONFIG_MII
41 #define IMX_FEC_BASE ENET_BASE_ADDR
42
43 /* USB config */
44 #define CONFIG_MXC_USB_PORT 1
45 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
46 #define CONFIG_MXC_USB_FLAGS 0
47
48 /* Memory config */
49 #define CONFIG_NR_DRAM_BANKS 1
50 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
51 #ifndef PHYS_SDRAM_SIZE
52 #define PHYS_SDRAM_SIZE (1024 << 20)
53 #endif
54
55 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
56 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
57 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
58
59 #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
60 GENERATED_GBL_DATA_SIZE)
61 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
62 CONFIG_SYS_INIT_SP_OFFSET)
63
64 #define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024)
65
66 #ifdef CONFIG_CMD_NAND
67
68 /* NAND config */
69 #define CONFIG_NAND_MXS
70 #ifndef CONFIG_SYS_NAND_MAX_CHIPS
71 #define CONFIG_SYS_NAND_MAX_CHIPS 2
72 #endif
73 #define CONFIG_SYS_MAX_NAND_DEVICE 1
74 #define CONFIG_SYS_NAND_BASE 0x40000000
75 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
76 #define CONFIG_SYS_NAND_ONFI_DETECTION
77
78 /* DMA config, needed for GPMI/MXS NAND support */
79 #define CONFIG_APBH_DMA
80 #define CONFIG_APBH_DMA_BURST
81 #define CONFIG_APBH_DMA_BURST8
82
83 /* Environment in NAND */
84 #define CONFIG_ENV_OFFSET (16 << 20)
85 #define CONFIG_ENV_SECT_SIZE (128 << 10)
86 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
87 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10))
88 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
89
90 #else /* CONFIG_CMD_NAND */
91
92 /* Environment in MMC */
93 #define CONFIG_ENV_SIZE (8 << 10)
94 #define CONFIG_ENV_OFFSET (6 * 64 * 1024)
95 #define CONFIG_SYS_MMC_ENV_DEV 0
96
97 #endif /* CONFIG_CMD_NAND */
98
99 /*
100 * U-Boot configuration
101 */
102
103 /* Board startup config */
104 #define CONFIG_MISC_INIT_R
105
106 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
107 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
108 PHYS_SDRAM_SIZE - (12 << 20))
109
110 #define CONFIG_BOOTCOMMAND "run bootubi_scr"
111
112 /* Miscellaneous configurable options */
113 #define CONFIG_PREBOOT
114
115 /* Print Buffer Size */
116 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
117 sizeof(CONFIG_SYS_PROMPT) + 16)
118
119 /* MTD/UBI/UBIFS config */
120 #define CONFIG_MTD_DEVICE
121 #define CONFIG_MTD_PARTITIONS
122
123 #if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
124 #define MTDIDS_DEFAULT "nand0=gpmi-nand"
125 #define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
126 "512k(env1),512k(env2),-(ubi)"
127 #elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
128 #define MTDIDS_DEFAULT "nand0=gpmi-nand"
129 #define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
130 "512k(env1),512k(env2),495M(ubi0)," \
131 "14M(res0),2M(res1)," \
132 "512k(res2),512k(res3),-(ubi1)"
133 #endif
134
135 /*
136 * Environment configuration
137 */
138
139 #if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
140 #define CONFIG_COMMON_ENV_UBI \
141 "setubipartition=env set ubipartition ubi\0" \
142 "setubirfs=env set ubirfs $ubipartition:rootfs$boot_vol\0"
143 #elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
144 #define CONFIG_COMMON_ENV_UBI \
145 "setubipartition=env set ubipartition ubi$boot_vol\0" \
146 "setubirfs=env set ubirfs ubi0:rootfs\0"
147 #endif
148
149 #define CONFIG_COMMON_ENV_MISC \
150 "user=user\0" \
151 "project="CONFIG_PLATINUM_PROJECT"\0" \
152 "uimage=uImage\0" \
153 "dtb="CONFIG_PLATINUM_CPU"-platinum-"CONFIG_PLATINUM_PROJECT".dtb\0" \
154 "serverip=serverip\0" \
155 "memaddrlinux=0x10800000\0" \
156 "memaddrsrc=0x11000000\0" \
157 "memaddrdtb=0x12000000\0" \
158 "console=ttymxc0\0" \
159 "baudrate=115200\0" \
160 "boot_scr=boot.uboot\0" \
161 "boot_vol=0\0" \
162 "mtdids="MTDIDS_DEFAULT"\0" \
163 "mtdparts="MTDPARTS_DEFAULT"\0" \
164 "mmcfs=ext2\0" \
165 "mmcrootpart=1\0" \
166 \
167 "setnfspath=env set nfspath /home/nfs/$user/$project/root\0" \
168 "settftpfilelinux=env set tftpfilelinux $user/$project/$uimage\0" \
169 "settftpfiledtb=env set tftpfiledtb $user/$project/$dtb\0" \
170 "setubifilelinux=env set ubifilelinux boot/$uimage\0" \
171 "setubipfiledtb=env set ubifiledtb boot/$dtb\0" \
172 "setmmcrootdev=env set mmcrootdev /dev/mmcblk0p$mmcrootpart\0" \
173 "setmmcfilelinux=env set mmcfilelinux /boot/$uimage\0" \
174 "setmmcfiledtb=env set mmcfiledtb /boot/$dtb\0" \
175 \
176 "loadtftpkernel=dhcp $memaddrlinux $tftpfilelinux\0" \
177 "loadtftpdtb=dhcp $memaddrdtb $tftpfiledtb\0" \
178 "loadubikernel=ubifsload $memaddrlinux $ubifilelinux\0" \
179 "loadubidtb=ubifsload $memaddrdtb $ubifiledtb\0" \
180 "loadmmckernel=${mmcfs}load mmc 0:$mmcrootpart $memaddrlinux " \
181 "$mmcfilelinux\0" \
182 "loadmmcdtb=${mmcfs}load mmc 0:$mmcrootpart $memaddrdtb " \
183 "$mmcfiledtb\0" \
184 \
185 "ubipart=ubi part $ubipartition\0" \
186 "ubimount=ubifsmount $ubirfs\0" \
187 \
188 "setbootargscommon=env set bootargs $bootargs " \
189 "console=$console,$baudrate enable_wait_mode=off\0" \
190 "setbootargsmtd=env set bootargs $bootargs $mtdparts\0" \
191 "setbootargsdhcp=env set bootargs $bootargs ip=dhcp\0" \
192 "setbootargsubirfs=env set bootargs $bootargs " \
193 "ubi.mtd=$ubipartition root=$ubirfs rootfstype=ubifs\0" \
194 "setbootargsnfsrfs=env set bootargs $bootargs root=/dev/nfs " \
195 "nfsroot=$serverip:$nfspath,v3,tcp\0" \
196 "setbootargsmmcrfs=env set bootargs $bootargs " \
197 "root=$mmcrootdev rootwait rw\0" \
198 \
199 "bootnet=run settftpfilelinux settftpfiledtb setnfspath " \
200 "setbootargscommon setbootargsmtd setbootargsdhcp " \
201 "setbootargsnfsrfs;" \
202 "run loadtftpkernel loadtftpdtb;" \
203 "bootm $memaddrlinux - $memaddrdtb\0" \
204 "bootnet_ubirfs=run settftpfilelinux settftpfiledtb;" \
205 "run setubipartition setubirfs;" \
206 "run setbootargscommon setbootargsmtd " \
207 "setbootargsubirfs;" \
208 "run loadtftpkernel loadtftpdtb;" \
209 "bootm $memaddrlinux - $memaddrdtb\0" \
210 "bootubi=run setubipartition setubirfs setubifilelinux " \
211 "setubipfiledtb;" \
212 "run setbootargscommon setbootargsmtd " \
213 "setbootargsubirfs;" \
214 "run ubipart ubimount loadubikernel loadubidtb;" \
215 "bootm $memaddrlinux - $memaddrdtb\0" \
216 "bootubi_scr=run setubipartition setubirfs;" \
217 "run ubipart ubimount;" \
218 "if ubifsload ${memaddrsrc} boot/${boot_scr}; " \
219 "then source ${memaddrsrc}; else run bootubi; fi\0" \
220 "bootmmc=run setmmcrootdev setmmcfilelinux setmmcfiledtb " \
221 "setbootargscommon setbootargsmmcrfs;" \
222 "run loadmmckernel loadmmcdtb;" \
223 "bootm $memaddrlinux - $memaddrdtb\0" \
224 \
225 "bootcmd="CONFIG_BOOTCOMMAND"\0"
226
227 #define CONFIG_COMMON_ENV_SETTINGS CONFIG_COMMON_ENV_MISC \
228 CONFIG_COMMON_ENV_UBI
229 #endif /* __PLATINUM_CONFIG_H__ */