]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/platinum.h
MIPS: add BMIPS Netgear CG3100D board
[people/ms/u-boot.git] / include / configs / platinum.h
1 /*
2 * Copyright (C) 2014, Barco (www.barco.com)
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7 #ifndef __PLATINUM_CONFIG_H__
8 #define __PLATINUM_CONFIG_H__
9
10 /* SPL */
11
12 /* Location in NAND to read U-Boot from */
13 #define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * 1024 * 1024)
14
15 #include "imx6_spl.h" /* common IMX6 SPL configuration */
16 #include "mx6_common.h"
17
18 /*
19 * Console configuration
20 */
21
22 #define CONFIG_CMD_MTDPARTS
23 #define CONFIG_CMD_NAND
24 #define CONFIG_CMD_NAND_TRIMFFS
25 #define CONFIG_CMD_UBIFS
26
27 /*
28 * Hardware configuration
29 */
30
31 /* UART config */
32 #define CONFIG_MXC_UART
33 #define CONFIG_MXC_UART_BASE UART1_BASE
34
35 /* I2C config */
36 #define CONFIG_SYS_I2C
37 #define CONFIG_SYS_I2C_MXC
38 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
39 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
40 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
41 #define CONFIG_SYS_I2C_SPEED 100000
42
43 /* MMC config */
44 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
45 #define CONFIG_SYS_FSL_USDHC_NUM 1
46
47 /* Ethernet config */
48 #define CONFIG_FEC_MXC
49 #define CONFIG_MII
50 #define IMX_FEC_BASE ENET_BASE_ADDR
51
52 #define CONFIG_PHYLIB
53
54 /* USB config */
55 #define CONFIG_MXC_USB_PORT 1
56 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
57 #define CONFIG_MXC_USB_FLAGS 0
58
59 /* Memory config */
60 #define CONFIG_NR_DRAM_BANKS 1
61 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
62 #ifndef PHYS_SDRAM_SIZE
63 #define PHYS_SDRAM_SIZE (1024 << 20)
64 #endif
65
66 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
67 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
68 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
69
70 #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
71 GENERATED_GBL_DATA_SIZE)
72 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
73 CONFIG_SYS_INIT_SP_OFFSET)
74
75 #define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024)
76
77 #ifdef CONFIG_CMD_NAND
78
79 /* NAND config */
80 #define CONFIG_NAND_MXS
81 #ifndef CONFIG_SYS_NAND_MAX_CHIPS
82 #define CONFIG_SYS_NAND_MAX_CHIPS 2
83 #endif
84 #define CONFIG_SYS_MAX_NAND_DEVICE 1
85 #define CONFIG_SYS_NAND_BASE 0x40000000
86 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
87 #define CONFIG_SYS_NAND_ONFI_DETECTION
88
89 /* DMA config, needed for GPMI/MXS NAND support */
90 #define CONFIG_APBH_DMA
91 #define CONFIG_APBH_DMA_BURST
92 #define CONFIG_APBH_DMA_BURST8
93
94 /* Environment in NAND */
95 #define CONFIG_ENV_IS_IN_NAND
96 #define CONFIG_ENV_OFFSET (16 << 20)
97 #define CONFIG_ENV_SECT_SIZE (128 << 10)
98 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
99 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10))
100 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
101
102 #else /* CONFIG_CMD_NAND */
103
104 /* Environment in MMC */
105 #define CONFIG_ENV_SIZE (8 << 10)
106 #define CONFIG_ENV_IS_IN_MMC
107 #define CONFIG_ENV_OFFSET (6 * 64 * 1024)
108 #define CONFIG_SYS_MMC_ENV_DEV 0
109
110 #endif /* CONFIG_CMD_NAND */
111
112 /*
113 * U-Boot configuration
114 */
115
116 /* Board startup config */
117 #define CONFIG_MISC_INIT_R
118
119 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
120 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
121 PHYS_SDRAM_SIZE - (12 << 20))
122
123 #define CONFIG_BOOTCOMMAND "run bootubi_scr"
124
125 /* Miscellaneous configurable options */
126 #define CONFIG_PREBOOT
127
128 /* Print Buffer Size */
129 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
130 sizeof(CONFIG_SYS_PROMPT) + 16)
131
132 /* MTD/UBI/UBIFS config */
133 #define CONFIG_LZO
134 #define CONFIG_MTD_DEVICE
135 #define CONFIG_MTD_PARTITIONS
136 #define CONFIG_RBTREE
137
138 #if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
139 #define MTDIDS_DEFAULT "nand0=gpmi-nand"
140 #define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
141 "512k(env1),512k(env2),-(ubi)"
142 #elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
143 #define MTDIDS_DEFAULT "nand0=gpmi-nand"
144 #define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
145 "512k(env1),512k(env2),495M(ubi0)," \
146 "14M(res0),2M(res1)," \
147 "512k(res2),512k(res3),-(ubi1)"
148 #endif
149
150 /*
151 * Environment configuration
152 */
153
154 #if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
155 #define CONFIG_COMMON_ENV_UBI \
156 "setubipartition=env set ubipartition ubi\0" \
157 "setubirfs=env set ubirfs $ubipartition:rootfs$boot_vol\0"
158 #elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
159 #define CONFIG_COMMON_ENV_UBI \
160 "setubipartition=env set ubipartition ubi$boot_vol\0" \
161 "setubirfs=env set ubirfs ubi0:rootfs\0"
162 #endif
163
164 #define CONFIG_COMMON_ENV_MISC \
165 "user=user\0" \
166 "project="CONFIG_PLATINUM_PROJECT"\0" \
167 "uimage=uImage\0" \
168 "dtb="CONFIG_PLATINUM_CPU"-platinum-"CONFIG_PLATINUM_PROJECT".dtb\0" \
169 "serverip=serverip\0" \
170 "memaddrlinux=0x10800000\0" \
171 "memaddrsrc=0x11000000\0" \
172 "memaddrdtb=0x12000000\0" \
173 "console=ttymxc0\0" \
174 "baudrate=115200\0" \
175 "boot_scr=boot.uboot\0" \
176 "boot_vol=0\0" \
177 "mtdids="MTDIDS_DEFAULT"\0" \
178 "mtdparts="MTDPARTS_DEFAULT"\0" \
179 "mmcfs=ext2\0" \
180 "mmcrootpart=1\0" \
181 \
182 "setnfspath=env set nfspath /home/nfs/$user/$project/root\0" \
183 "settftpfilelinux=env set tftpfilelinux $user/$project/$uimage\0" \
184 "settftpfiledtb=env set tftpfiledtb $user/$project/$dtb\0" \
185 "setubifilelinux=env set ubifilelinux boot/$uimage\0" \
186 "setubipfiledtb=env set ubifiledtb boot/$dtb\0" \
187 "setmmcrootdev=env set mmcrootdev /dev/mmcblk0p$mmcrootpart\0" \
188 "setmmcfilelinux=env set mmcfilelinux /boot/$uimage\0" \
189 "setmmcfiledtb=env set mmcfiledtb /boot/$dtb\0" \
190 \
191 "loadtftpkernel=dhcp $memaddrlinux $tftpfilelinux\0" \
192 "loadtftpdtb=dhcp $memaddrdtb $tftpfiledtb\0" \
193 "loadubikernel=ubifsload $memaddrlinux $ubifilelinux\0" \
194 "loadubidtb=ubifsload $memaddrdtb $ubifiledtb\0" \
195 "loadmmckernel=${mmcfs}load mmc 0:$mmcrootpart $memaddrlinux " \
196 "$mmcfilelinux\0" \
197 "loadmmcdtb=${mmcfs}load mmc 0:$mmcrootpart $memaddrdtb " \
198 "$mmcfiledtb\0" \
199 \
200 "ubipart=ubi part $ubipartition\0" \
201 "ubimount=ubifsmount $ubirfs\0" \
202 \
203 "setbootargscommon=env set bootargs $bootargs " \
204 "console=$console,$baudrate enable_wait_mode=off\0" \
205 "setbootargsmtd=env set bootargs $bootargs $mtdparts\0" \
206 "setbootargsdhcp=env set bootargs $bootargs ip=dhcp\0" \
207 "setbootargsubirfs=env set bootargs $bootargs " \
208 "ubi.mtd=$ubipartition root=$ubirfs rootfstype=ubifs\0" \
209 "setbootargsnfsrfs=env set bootargs $bootargs root=/dev/nfs " \
210 "nfsroot=$serverip:$nfspath,v3,tcp\0" \
211 "setbootargsmmcrfs=env set bootargs $bootargs " \
212 "root=$mmcrootdev rootwait rw\0" \
213 \
214 "bootnet=run settftpfilelinux settftpfiledtb setnfspath " \
215 "setbootargscommon setbootargsmtd setbootargsdhcp " \
216 "setbootargsnfsrfs;" \
217 "run loadtftpkernel loadtftpdtb;" \
218 "bootm $memaddrlinux - $memaddrdtb\0" \
219 "bootnet_ubirfs=run settftpfilelinux settftpfiledtb;" \
220 "run setubipartition setubirfs;" \
221 "run setbootargscommon setbootargsmtd " \
222 "setbootargsubirfs;" \
223 "run loadtftpkernel loadtftpdtb;" \
224 "bootm $memaddrlinux - $memaddrdtb\0" \
225 "bootubi=run setubipartition setubirfs setubifilelinux " \
226 "setubipfiledtb;" \
227 "run setbootargscommon setbootargsmtd " \
228 "setbootargsubirfs;" \
229 "run ubipart ubimount loadubikernel loadubidtb;" \
230 "bootm $memaddrlinux - $memaddrdtb\0" \
231 "bootubi_scr=run setubipartition setubirfs;" \
232 "run ubipart ubimount;" \
233 "if ubifsload ${memaddrsrc} boot/${boot_scr}; " \
234 "then source ${memaddrsrc}; else run bootubi; fi\0" \
235 "bootmmc=run setmmcrootdev setmmcfilelinux setmmcfiledtb " \
236 "setbootargscommon setbootargsmmcrfs;" \
237 "run loadmmckernel loadmmcdtb;" \
238 "bootm $memaddrlinux - $memaddrdtb\0" \
239 \
240 "bootcmd="CONFIG_BOOTCOMMAND"\0"
241
242 #define CONFIG_COMMON_ENV_SETTINGS CONFIG_COMMON_ENV_MISC \
243 CONFIG_COMMON_ENV_UBI
244 #endif /* __PLATINUM_CONFIG_H__ */