include/configs/pm9g45.h

   1 /*
   2  * (C) Copyright 2010
   3  * Ilko Iliev <iliev@ronetix.at>
   4  * Asen Dimov <dimov@ronetix.at>
   5  * Ronetix GmbH <www.ronetix.at>
   6  *
   7  * (C) Copyright 2007-2008
   8  * Stelian Pop <stelian@popies.net>
   9  * Lead Tech Design <www.leadtechdesign.com>
  10  *
  11  * Configuation settings for the PM9G45 board.
  12  *
  13  * See file CREDITS for list of people who contributed to this
  14  * project.
  15  *
  16  * This program is free software; you can redistribute it and/or
  17  * modify it under the terms of the GNU General Public License as
  18  * published by the Free Software Foundation; either version 2 of
  19  * the License, or (at your option) any later version.
  20  *
  21  * This program is distributed in the hope that it will be useful,
  22  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  23  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  24  * GNU General Public License for more details.
  25  *
  26  * You should have received a copy of the GNU General Public License
  27  * along with this program; if not, write to the Free Software
  28  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  29  * MA 02111-1307 USA
  30  */
  31
  32 #ifndef __CONFIG_H
  33 #define __CONFIG_H
  34
  35 /*
  36  * SoC must be defined first, before hardware.h is included.
  37  * In this case SoC is defined in boards.cfg.
  38  */
  39 #include <asm/hardware.h>
  40
  41 #define CONFIG_PM9G45           1       /* It's an Ronetix PM9G45 */
  42 #define CONFIG_SYS_AT91_CPU_NAME        "AT91SAM9G45"
  43
  44 #define MACH_TYPE_PM9G45        2672
  45 #define CONFIG_MACH_TYPE        MACH_TYPE_PM9G45
  46
  47 /* ARM asynchronous clock */
  48 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
  49 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768           /* slow clock xtal */
  50 #define CONFIG_SYS_HZ                   1000
  51 #define CONFIG_SYS_TEXT_BASE            0x73f00000
  52
  53 #define CONFIG_ARCH_CPU_INIT
  54
  55 #define CONFIG_CMDLINE_TAG      1       /* enable passing of ATAGs */
  56 #define CONFIG_SETUP_MEMORY_TAGS 1
  57 #define CONFIG_INITRD_TAG       1
  58
  59 #define CONFIG_SKIP_LOWLEVEL_INIT
  60 #define CONFIG_BOARD_EARLY_INIT_F
  61
  62 /*
  63  * Hardware drivers
  64  */
  65 #define CONFIG_AT91_GPIO        1
  66 #define CONFIG_ATMEL_USART      1
  67 #define CONFIG_USART_BASE               ATMEL_BASE_DBGU
  68 #define CONFIG_USART_ID                 ATMEL_ID_SYS
  69
  70 #define CONFIG_SYS_USE_NANDFLASH        1
  71
  72 /* LED */
  73 #define CONFIG_AT91_LED
  74 #define CONFIG_RED_LED          AT91_PIO_PORTD, 31 /* this is the user1 led */
  75 #define CONFIG_GREEN_LED        AT91_PIO_PORTD, 0 /* this is the user2 led */
  76
  77 #define CONFIG_BOOTDELAY        3
  78
  79 /*
  80  * BOOTP options
  81  */
  82 #define CONFIG_BOOTP_BOOTFILESIZE       1
  83 #define CONFIG_BOOTP_BOOTPATH           1
  84 #define CONFIG_BOOTP_GATEWAY            1
  85 #define CONFIG_BOOTP_HOSTNAME           1
  86
  87 /*
  88  * Command line configuration.
  89  */
  90 #include <config_cmd_default.h>
  91 #undef CONFIG_CMD_FPGA
  92 #undef CONFIG_CMD_IMLS
  93
  94 #define CONFIG_CMD_CACHE
  95 #define CONFIG_CMD_PING         1
  96 #define CONFIG_CMD_DHCP         1
  97 #define CONFIG_CMD_NAND         1
  98 #define CONFIG_CMD_USB          1
  99
 100 #define CONFIG_CMD_JFFS2                1
 101 #define CONFIG_JFFS2_CMDLINE            1
 102 #define CONFIG_JFFS2_NAND               1
 103 #define CONFIG_JFFS2_DEV                "nand0" /* NAND dev jffs2 lives on */
 104 #define CONFIG_JFFS2_PART_OFFSET        0       /* start of jffs2 partition */
 105 #define CONFIG_JFFS2_PART_SIZE          (256 * 1024 * 1024) /* partition */
 106
 107 /* SDRAM */
 108 #define CONFIG_NR_DRAM_BANKS            1
 109 #define PHYS_SDRAM                      0x70000000
 110 #define PHYS_SDRAM_SIZE                 0x08000000      /* 128 megs */
 111
 112 /* NOR flash, not available */
 113 #define CONFIG_SYS_NO_FLASH             1
 114 #undef CONFIG_CMD_FLASH
 115
 116 /* NAND flash */
 117 #ifdef CONFIG_CMD_NAND
 118 #define CONFIG_NAND_ATMEL
 119 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 120 #define CONFIG_SYS_NAND_BASE            0x40000000
 121 #define CONFIG_SYS_NAND_DBW_8           1
 122 /* our ALE is AD21 */
 123 #define CONFIG_SYS_NAND_MASK_ALE        (1 << 21)
 124 /* our CLE is AD22 */
 125 #define CONFIG_SYS_NAND_MASK_CLE        (1 << 22)
 126 #define CONFIG_SYS_NAND_ENABLE_PIN      AT91_PIO_PORTC, 14
 127 #define CONFIG_SYS_NAND_READY_PIN       AT91_PIO_PORTD, 3
 128
 129 #endif
 130
 131 /* Ethernet */
 132 #define CONFIG_MACB                     1
 133 #define CONFIG_RMII                     1
 134 #define CONFIG_NET_RETRY_COUNT          20
 135 #define CONFIG_RESET_PHY_R              1
 136
 137 /* USB */
 138 #define CONFIG_USB_ATMEL
 139 #define CONFIG_USB_OHCI_NEW             1
 140 #define CONFIG_DOS_PARTITION            1
 141 #define CONFIG_SYS_USB_OHCI_CPU_INIT    1
 142 #define CONFIG_SYS_USB_OHCI_REGS_BASE   0x00700000 /* _UHP_OHCI_BASE */
 143 #define CONFIG_SYS_USB_OHCI_SLOT_NAME   "at91sam9g45"
 144 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      2
 145 #define CONFIG_USB_STORAGE              1
 146
 147 /* board specific(not enough SRAM) */
 148 #define CONFIG_AT91SAM9G45_LCD_BASE     PHYS_SDRAM + 0xE00000
 149
 150 #define CONFIG_SYS_LOAD_ADDR            PHYS_SDRAM + 0x2000000 /* load addr */
 151
 152 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM
 153 #define CONFIG_SYS_MEMTEST_END          CONFIG_AT91SAM9G45_LCD_BASE
 154
 155 /* bootstrap + u-boot + env + linux in nandflash */
 156 #define CONFIG_ENV_IS_IN_NAND           1
 157 #define CONFIG_ENV_OFFSET               0x60000
 158 #define CONFIG_ENV_OFFSET_REDUND        0x80000
 159 #define CONFIG_ENV_SIZE                 0x20000         /* 1 sector = 128 kB */
 160 #define CONFIG_BOOTCOMMAND      "nand read 0x72000000 0x200000 0x200000; bootm"
 161 #define CONFIG_BOOTARGS         "fbcon=rotate:3 console=tty0 " \
 162                                 "console=ttyS0,115200 " \
 163                                 "root=/dev/mtdblock4 " \
 164                                 "mtdparts=atmel_nand:128k(bootstrap)ro," \
 165                                 "256k(uboot)ro,1664k(env)," \
 166                                 "2M(linux)ro,-(root) rw " \
 167                                 "rootfstype=jffs2"
 168
 169 #define CONFIG_BAUDRATE                 115200
 170 #define CONFIG_SYS_BAUDRATE_TABLE       {115200 , 19200, 38400, 57600, 9600 }
 171
 172 #define CONFIG_SYS_PROMPT               "U-Boot> "
 173 #define CONFIG_SYS_CBSIZE               256
 174 #define CONFIG_SYS_MAXARGS              16
 175 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 176                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 177 #define CONFIG_SYS_LONGHELP             1
 178 #define CONFIG_CMDLINE_EDITING          1
 179 #define CONFIG_AUTO_COMPLETE
 180 #define CONFIG_SYS_HUSH_PARSER
 181 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 182
 183 /*
 184  * Size of malloc() pool
 185  */
 186 #define CONFIG_SYS_MALLOC_LEN           ROUND(3 * CONFIG_ENV_SIZE + 128*1024,\
 187                                         0x1000)
 188
 189 #define CONFIG_SYS_SDRAM_BASE   PHYS_SDRAM
 190 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
 191                                 GENERATED_GBL_DATA_SIZE)
 192
 193 #define CONFIG_STACKSIZE                (32*1024)       /* regular stack */
 194
 195 #ifdef CONFIG_USE_IRQ
 196 #error CONFIG_USE_IRQ not supported
 197 #endif
 198
 199 #endif