include/configs/qemu-mips.h

   1 /*
   2  * (C) Copyright 2003
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * This file contains the configuration parameters for qemu-mips target.
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #define CONFIG_QEMU_MIPS
  16
  17 #define CONFIG_SYS_GENERIC_BOARD
  18 #define CONFIG_DISPLAY_BOARDINFO
  19 #define CONFIG_MISC_INIT_R
  20
  21 #define CONFIG_BOOTDELAY        10      /* autoboot after 10 seconds */
  22
  23 #define CONFIG_BAUDRATE         115200
  24
  25 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  26 #undef CONFIG_BOOTARGS
  27
  28 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  29         "addmisc=setenv bootargs ${bootargs} "                          \
  30                 "console=ttyS0,${baudrate} "                            \
  31                 "panic=1\0"                                             \
  32         "bootfile=/tftpboot/vmlinux\0"                          \
  33         "load=tftp 80500000 ${u-boot}\0"                                \
  34         ""
  35
  36 #define CONFIG_BOOTCOMMAND      "bootp;bootelf"
  37
  38 /*
  39  * BOOTP options
  40  */
  41 #define CONFIG_BOOTP_BOOTFILESIZE
  42 #define CONFIG_BOOTP_BOOTPATH
  43 #define CONFIG_BOOTP_GATEWAY
  44 #define CONFIG_BOOTP_HOSTNAME
  45
  46 /*
  47  * Command line configuration.
  48  */
  49 #include <config_cmd_default.h>
  50
  51 #define CONFIG_CMD_ELF
  52 #define CONFIG_CMD_FAT
  53 #define CONFIG_CMD_EXT2
  54 #undef CONFIG_CMD_LOADB
  55 #undef CONFIG_CMD_LOADS
  56 #define CONFIG_CMD_DHCP
  57
  58 #define CONFIG_DRIVER_NE2000
  59 #define CONFIG_DRIVER_NE2000_BASE       0xb4000300
  60
  61 #define CONFIG_SYS_NS16550
  62 #define CONFIG_SYS_NS16550_SERIAL
  63 #define CONFIG_SYS_NS16550_REG_SIZE     1
  64 #define CONFIG_SYS_NS16550_CLK          115200
  65 #define CONFIG_SYS_NS16550_COM1         0xb40003f8
  66 #define CONFIG_CONS_INDEX               1
  67
  68 #define CONFIG_CMD_IDE
  69 #define CONFIG_DOS_PARTITION
  70
  71 #define CONFIG_SYS_IDE_MAXBUS           2
  72 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x1f0
  73 #define CONFIG_SYS_ATA_IDE1_OFFSET      0x170
  74 #define CONFIG_SYS_ATA_DATA_OFFSET      0
  75 #define CONFIG_SYS_ATA_REG_OFFSET       0
  76 #define CONFIG_SYS_ATA_BASE_ADDR        0xb4000000
  77
  78 #define CONFIG_SYS_IDE_MAXDEVICE        4
  79
  80 /*
  81  * Miscellaneous configurable options
  82  */
  83 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
  84
  85 /* Monitor Command Prompt */
  86 #if defined(CONFIG_SYS_LITTLE_ENDIAN)
  87 #define CONFIG_SYS_PROMPT               "qemu-mipsel # "
  88 #else
  89 #define CONFIG_SYS_PROMPT               "qemu-mips # "
  90 #endif
  91
  92 #define CONFIG_AUTO_COMPLETE
  93 #define CONFIG_CMDLINE_EDITING
  94 #define CONFIG_SYS_HUSH_PARSER
  95
  96 /* Console I/O Buffer Size */
  97 #define CONFIG_SYS_CBSIZE               256
  98 /* Print Buffer Size */
  99 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 100 /* max number of command args */
 101 #define CONFIG_SYS_MAXARGS              16
 102
 103 #define CONFIG_SYS_MALLOC_LEN           128*1024
 104
 105 #define CONFIG_SYS_BOOTPARAMS_LEN       128*1024
 106
 107 #define CONFIG_SYS_MHZ                  132
 108
 109 #define CONFIG_SYS_MIPS_TIMER_FREQ      (CONFIG_SYS_MHZ * 1000000)
 110
 111 /* Cached addr */
 112 #define CONFIG_SYS_SDRAM_BASE           0x80000000
 113
 114 /* default load address */
 115 #define CONFIG_SYS_LOAD_ADDR            0x81000000
 116
 117 #define CONFIG_SYS_MEMTEST_START        0x80100000
 118 #define CONFIG_SYS_MEMTEST_END          0x80800000
 119
 120 /*-----------------------------------------------------------------------
 121  * FLASH and environment organization
 122  */
 123 /* The following #defines are needed to get flash environment right */
 124 #define CONFIG_SYS_TEXT_BASE            0xbfc00000 /* Rom version */
 125 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 126 #define CONFIG_SYS_MONITOR_LEN          (192 << 10)
 127
 128 #define CONFIG_SYS_INIT_SP_OFFSET       0x400000
 129
 130 /* We boot from this flash, selected with dip switch */
 131 #define CONFIG_SYS_FLASH_BASE           0xbfc00000
 132 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 133 #define CONFIG_SYS_MAX_FLASH_SECT       128
 134 #define CONFIG_SYS_FLASH_CFI
 135 #define CONFIG_FLASH_CFI_DRIVER
 136 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 137
 138 #define CONFIG_ENV_IS_IN_FLASH
 139 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 140
 141 /* Address and size of Primary Environment Sector */
 142 #define CONFIG_ENV_SIZE         0x8000
 143
 144 #define CONFIG_ENV_OVERWRITE    1
 145
 146 #define MEM_SIZE                128
 147
 148 #define CONFIG_LZMA
 149
 150 /*-----------------------------------------------------------------------
 151  * Cache Configuration
 152  */
 153 #define CONFIG_SYS_DCACHE_SIZE          16384
 154 #define CONFIG_SYS_ICACHE_SIZE          16384
 155 #define CONFIG_SYS_CACHELINE_SIZE       32
 156
 157 #endif /* __CONFIG_H */