include/configs/qemu-ppce500.h

   1 /*
   2  * Copyright 2011-2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * Corenet DS style board configuration file
   9  */
  10 #ifndef __QEMU_PPCE500_H
  11 #define __QEMU_PPCE500_H
  12
  13 #undef CONFIG_SYS_TEXT_BASE
  14 #define CONFIG_SYS_TEXT_BASE    0xf01000 /* 15 MB */
  15
  16 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  17
  18 #define CONFIG_SYS_RAMBOOT
  19
  20 #define CONFIG_PCI1             1       /* PCI controller 1 */
  21 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  22 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  23
  24 #define CONFIG_ENV_OVERWRITE
  25
  26 #define CONFIG_ENABLE_36BIT_PHYS
  27
  28 #define CONFIG_ADDR_MAP
  29 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
  30
  31 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
  32 #define CONFIG_SYS_MEMTEST_END          0x00400000
  33 #define CONFIG_SYS_ALT_MEMTEST
  34
  35 /* Needed to fill the ccsrbar pointer */
  36
  37 /* Virtual address to CCSRBAR */
  38 #define CONFIG_SYS_CCSRBAR              0xe0000000
  39 /* Physical address should be a function call */
  40 #ifndef __ASSEMBLY__
  41 extern unsigned long long get_phys_ccsrbar_addr_early(void);
  42 #define CONFIG_SYS_CCSRBAR_PHYS_HIGH (get_phys_ccsrbar_addr_early() >> 32)
  43 #define CONFIG_SYS_CCSRBAR_PHYS_LOW get_phys_ccsrbar_addr_early()
  44 #else
  45 #define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0
  46 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
  47 #endif
  48
  49 /* Virtual address range for PCI region maps */
  50 #define CONFIG_SYS_PCI_MAP_START        0x80000000
  51 #define CONFIG_SYS_PCI_MAP_END          0xe8000000
  52
  53 /* Virtual address to a temporary map if we need it (max 128MB) */
  54 #define CONFIG_SYS_TMPVIRT              0xe8000000
  55
  56 /*
  57  * DDR Setup
  58  */
  59 #define CONFIG_VERY_BIG_RAM
  60 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  61 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  62
  63 #define CONFIG_CHIP_SELECTS_PER_CTRL    0
  64
  65 #define CONFIG_SYS_CLK_FREQ        33000000
  66
  67 #define CONFIG_SYS_BOOT_BLOCK           0x00000000      /* boot TLB */
  68
  69 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
  70
  71 #define CONFIG_HWCONFIG
  72
  73 #define CONFIG_SYS_INIT_RAM_ADDR                0x00100000
  74 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0x0
  75 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0x00100000
  76 /* The assembler doesn't like typecast */
  77 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
  78         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
  79           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
  80 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
  81
  82 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
  83                                         GENERATED_GBL_DATA_SIZE)
  84 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
  85
  86 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
  87 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
  88
  89 #define CONFIG_CONS_INDEX       1
  90 #define CONFIG_SYS_NS16550_SERIAL
  91 #define CONFIG_SYS_NS16550_REG_SIZE     1
  92 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0))
  93
  94 #define CONFIG_SYS_BAUDRATE_TABLE       \
  95         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
  96
  97 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
  98 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
  99
 100 /*
 101  * General PCI
 102  * Memory space is mapped 1-1, but I/O space must start from 0.
 103  */
 104
 105 #ifdef CONFIG_PCI
 106 #define CONFIG_PCI_INDIRECT_BRIDGE
 107
 108 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 109 #endif  /* CONFIG_PCI */
 110
 111 #define CONFIG_LBA48
 112
 113 /*
 114  * Environment
 115  */
 116 #define CONFIG_ENV_SIZE         0x2000
 117
 118 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 119
 120 #define CONFIG_LAST_STAGE_INIT
 121
 122 /*
 123  * Command line configuration.
 124  */
 125
 126 /*
 127  * Miscellaneous configurable options
 128  */
 129 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 130 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 131 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 132 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 133
 134 /*
 135  * For booting Linux, the board info and command line data
 136  * have to be in the first 64 MB of memory, since this is
 137  * the maximum mapped by the Linux kernel during initialization.
 138  */
 139 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 140 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 141
 142 /*
 143  * Environment Configuration
 144  */
 145 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 146 #define CONFIG_BOOTFILE         "uImage"
 147 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 148
 149 /* default location for tftp and bootm */
 150 #define CONFIG_LOADADDR         1000000
 151
 152 #define CONFIG_BOOTCOMMAND              \
 153         "test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdt_addr_r\0"
 154
 155 #endif  /* __QEMU_PPCE500_H */