include/configs/r0p7734.h

   1 /*
   2  * Configuation settings for the Renesas Solutions r0p7734 board
   3  *
   4  * Copyright (C) 2010, 2011 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __R0P7734_H
  10 #define __R0P7734_H
  11
  12 #define CONFIG_CPU_SH7734       1
  13 #define CONFIG_R0P7734          1
  14 #define CONFIG_400MHZ_MODE      1
  15 /* #define CONFIG_533MHZ_MODE   1 */
  16
  17 #define CONFIG_SYS_TEXT_BASE 0x8FFC0000
  18
  19 #define CONFIG_DISPLAY_BOARDINFO
  20 #undef  CONFIG_SHOW_BOOT_PROGRESS
  21
  22 /* Ether */
  23 #define CONFIG_SH_ETHER 1
  24 #define CONFIG_SH_ETHER_USE_PORT (0)
  25 #define CONFIG_SH_ETHER_PHY_ADDR (0x0)
  26 #define CONFIG_PHY_SMSC 1
  27 #define CONFIG_BITBANGMII
  28 #define CONFIG_BITBANGMII_MULTI
  29 #define CONFIG_SH_ETHER_SH7734_MII (0x00) /* MII */
  30 #define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII
  31 #ifndef CONFIG_SH_ETHER
  32 # define CONFIG_SMC911X
  33 # define CONFIG_SMC911X_16_BIT
  34 # define CONFIG_SMC911X_BASE (0x84000000)
  35 #endif
  36
  37 /* undef to save memory */
  38 #define CONFIG_SYS_LONGHELP
  39 /* List of legal baudrate settings for this board */
  40 #define CONFIG_SYS_BAUDRATE_TABLE       { 115200 }
  41
  42 /* SCIF */
  43 #define CONFIG_SCIF                     1
  44 #define CONFIG_CONS_SCIF3       1
  45
  46 /* Suppress display of console information at boot */
  47
  48 /* SDRAM */
  49 #define CONFIG_SYS_SDRAM_BASE   (0x88000000)
  50 #define CONFIG_SYS_SDRAM_SIZE   (128 * 1024 * 1024)
  51 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)
  52
  53 #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
  54 #define CONFIG_SYS_MEMTEST_END   (CONFIG_SYS_MEMTEST_START + 100 * 1024 * 1024)
  55 /* Enable alternate, more extensive, memory test */
  56 #undef  CONFIG_SYS_ALT_MEMTEST
  57 /* Scratch address used by the alternate memory test */
  58 #undef  CONFIG_SYS_MEMTEST_SCRATCH
  59
  60 /* Enable temporary baudrate change while serial download */
  61 #undef  CONFIG_SYS_LOADS_BAUD_CHANGE
  62
  63 /* FLASH */
  64 #define CONFIG_FLASH_CFI_DRIVER 1
  65 #define CONFIG_SYS_FLASH_CFI
  66 #undef  CONFIG_SYS_FLASH_QUIET_TEST
  67 #define CONFIG_SYS_FLASH_EMPTY_INFO
  68 #define CONFIG_SYS_FLASH_BASE   (0xA0000000)
  69 #define CONFIG_SYS_MAX_FLASH_SECT       512
  70
  71 /* if you use all NOR Flash , you change dip-switch. Please see Manual. */
  72 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  73 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
  74
  75 /* Timeout for Flash erase operations (in ms) */
  76 #define CONFIG_SYS_FLASH_ERASE_TOUT     (3 * 1000)
  77 /* Timeout for Flash write operations (in ms) */
  78 #define CONFIG_SYS_FLASH_WRITE_TOUT     (3 * 1000)
  79 /* Timeout for Flash set sector lock bit operations (in ms) */
  80 #define CONFIG_SYS_FLASH_LOCK_TOUT      (3 * 1000)
  81 /* Timeout for Flash clear lock bit operations (in ms) */
  82 #define CONFIG_SYS_FLASH_UNLOCK_TOUT    (3 * 1000)
  83
  84 /*
  85  * Use hardware flash sectors protection instead
  86  * of U-Boot software protection
  87  */
  88 #undef  CONFIG_SYS_FLASH_PROTECTION
  89 #undef  CONFIG_SYS_DIRECT_FLASH_TFTP
  90
  91 /* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
  92 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE)
  93 /* Monitor size */
  94 #define CONFIG_SYS_MONITOR_LEN  (256 * 1024)
  95 /* Size of DRAM reserved for malloc() use */
  96 #define CONFIG_SYS_MALLOC_LEN   (256 * 1024)
  97 #define CONFIG_SYS_BOOTMAPSZ    (8 * 1024 * 1024)
  98
  99 /* ENV setting */
 100 #define CONFIG_ENV_OVERWRITE    1
 101 #define CONFIG_ENV_SECT_SIZE    (128 * 1024)
 102 #define CONFIG_ENV_SIZE         (CONFIG_ENV_SECT_SIZE)
 103 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 104 /* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
 105 #define CONFIG_ENV_OFFSET       (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
 106 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SECT_SIZE)
 107
 108 /* Board Clock */
 109 #if defined(CONFIG_400MHZ_MODE)
 110 #define CONFIG_SYS_CLK_FREQ 50000000
 111 #else
 112 #define CONFIG_SYS_CLK_FREQ 44444444
 113 #endif
 114 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
 115 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
 116 #define CONFIG_SYS_TMU_CLK_DIV      4
 117
 118 #endif  /* __R0P7734_H */