]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/rk3036_common.h
Merge branch 'master' of git://git.denx.de/u-boot-spi
[people/ms/u-boot.git] / include / configs / rk3036_common.h
1 /*
2 * (C) Copyright 2015 Rockchip Electronics Co., Ltd
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6 #ifndef __CONFIG_RK3036_COMMON_H
7 #define __CONFIG_RK3036_COMMON_H
8
9 #define CONFIG_SYS_CACHELINE_SIZE 32
10
11 #include <asm/arch/hardware.h>
12
13 #define CONFIG_SYS_NO_FLASH
14 #define CONFIG_NR_DRAM_BANKS 1
15 #define CONFIG_ENV_IS_NOWHERE
16 #define CONFIG_ENV_SIZE 0x2000
17 #define CONFIG_SYS_MAXARGS 16
18 #define CONFIG_BAUDRATE 115200
19 #define CONFIG_SYS_MALLOC_LEN (32 << 20)
20 #define CONFIG_SYS_CBSIZE 1024
21 #define CONFIG_SKIP_LOWLEVEL_INIT
22 #define CONFIG_SYS_THUMB_BUILD
23 #define CONFIG_DISPLAY_BOARDINFO
24
25 #define CONFIG_SYS_TIMER_RATE (24 * 1000 * 1000)
26 #define CONFIG_SYS_TIMER_BASE 0x200440a0 /* TIMER5 */
27 #define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8)
28
29 #define CONFIG_SPL_SERIAL_SUPPORT
30
31 #define CONFIG_SYS_NS16550
32 #define CONFIG_SYS_NS16550_MEM32
33
34 #define CONFIG_SYS_TEXT_BASE 0x60000000
35 #define CONFIG_SYS_INIT_SP_ADDR 0x60100000
36 #define CONFIG_SYS_LOAD_ADDR 0x60800800
37 #define CONFIG_SPL_STACK 0x10081fff
38 #define CONFIG_SPL_TEXT_BASE 0x10081004
39
40 #define CONFIG_ROCKCHIP_MAX_INIT_SIZE (4 << 10)
41 #define CONFIG_ROCKCHIP_CHIP_TAG "RK30"
42
43 #define CONFIG_ROCKCHIP_COMMON
44
45 /* MMC/SD IP block */
46 #define CONFIG_MMC
47 #define CONFIG_GENERIC_MMC
48 #define CONFIG_DWMMC
49 #define CONFIG_BOUNCE_BUFFER
50
51 #define CONFIG_DOS_PARTITION
52 #define CONFIG_FAT_WRITE
53 #define CONFIG_PARTITION_UUIDS
54 #define CONFIG_CMD_PART
55
56 #define CONFIG_SYS_SDRAM_BASE 0x60000000
57 #define CONFIG_NR_DRAM_BANKS 1
58 #define SDRAM_BANK_SIZE (512UL << 20UL)
59
60 #define CONFIG_SPI_FLASH
61 #define CONFIG_SPI
62 #define CONFIG_SPI_FLASH_GIGADEVICE
63 #define CONFIG_SF_DEFAULT_SPEED 20000000
64
65 #ifndef CONFIG_SPL_BUILD
66 #include <config_distro_defaults.h>
67
68 #define ENV_MEM_LAYOUT_SETTINGS \
69 "scriptaddr=0x60000000\0" \
70 "pxefile_addr_r=0x60100000\0" \
71 "fdt_addr_r=0x61f00000\0" \
72 "kernel_addr_r=0x62000000\0" \
73 "ramdisk_addr_r=0x64000000\0"
74
75 /* First try to boot from SD (index 0), then eMMC (index 1 */
76 #define BOOT_TARGET_DEVICES(func) \
77 func(MMC, mmc, 0) \
78 func(MMC, mmc, 1)
79
80 #include <config_distro_bootcmd.h>
81
82 /* Linux fails to load the fdt if it's loaded above 512M on a evb-rk3036 board,
83 * so limit the fdt reallocation to that */
84 #define CONFIG_EXTRA_ENV_SETTINGS \
85 "fdt_high=0x7fffffff\0" \
86 ENV_MEM_LAYOUT_SETTINGS \
87 BOOTENV
88 #endif
89
90 #endif