]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/rk3288_common.h
Merge branch 'master' of git://www.denx.de/git/u-boot-imx
[people/ms/u-boot.git] / include / configs / rk3288_common.h
1 /*
2 * (C) Copyright 2015 Google, Inc
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7 #ifndef __CONFIG_RK3288_COMMON_H
8 #define __CONFIG_RK3288_COMMON_H
9
10 #include <asm/arch/hardware.h>
11 #include "rockchip-common.h"
12
13 #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
14 #define CONFIG_NR_DRAM_BANKS 1
15 #define CONFIG_ENV_SIZE 0x2000
16 #define CONFIG_SYS_MALLOC_LEN (32 << 20)
17 #define CONFIG_SYS_CBSIZE 1024
18
19 #define CONFIG_SYS_TIMER_RATE (24 * 1000 * 1000)
20 #define CONFIG_SYS_TIMER_BASE 0xff810020 /* TIMER7 */
21 #define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8)
22
23 #define CONFIG_SPL_FRAMEWORK
24 #define CONFIG_SYS_NS16550_MEM32
25
26 #ifdef CONFIG_SPL_ROCKCHIP_BACK_TO_BROM
27 /* Bootrom will load u-boot binary to 0x0 once return from SPL */
28 #define CONFIG_SYS_TEXT_BASE 0x00000000
29 #else
30 #define CONFIG_SYS_TEXT_BASE 0x00100000
31 #endif
32 #define CONFIG_SYS_INIT_SP_ADDR 0x00100000
33 #define CONFIG_SYS_LOAD_ADDR 0x00800800
34 #define CONFIG_SPL_STACK 0xff718000
35 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_TPL_BOOTROM_SUPPORT)
36 # define CONFIG_SPL_TEXT_BASE 0x0
37 #else
38 # define CONFIG_SPL_TEXT_BASE 0xff704004
39 #endif
40
41 /* MMC/SD IP block */
42 #define CONFIG_BOUNCE_BUFFER
43
44 /* RAW SD card / eMMC locations. */
45 #define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10)
46
47 /* FAT sd card locations. */
48 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
49 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
50
51 #define CONFIG_SYS_SDRAM_BASE 0
52 #define CONFIG_NR_DRAM_BANKS 1
53 #define SDRAM_BANK_SIZE (2UL << 30)
54 #define SDRAM_MAX_SIZE 0xfe000000
55
56 #define CONFIG_SPI_FLASH
57 #define CONFIG_SPI
58 #define CONFIG_SF_DEFAULT_SPEED 20000000
59
60 #ifndef CONFIG_SPL_BUILD
61 /* usb otg */
62 #define CONFIG_ROCKCHIP_USB2_PHY
63
64 /* usb mass storage */
65 #define CONFIG_USB_FUNCTION_MASS_STORAGE
66 #define CONFIG_CMD_USB_MASS_STORAGE
67
68 /* usb host support */
69 #define ENV_MEM_LAYOUT_SETTINGS \
70 "scriptaddr=0x00000000\0" \
71 "pxefile_addr_r=0x00100000\0" \
72 "fdt_addr_r=0x01f00000\0" \
73 "kernel_addr_r=0x02000000\0" \
74 "ramdisk_addr_r=0x04000000\0"
75
76 #include <config_distro_bootcmd.h>
77
78 /* Linux fails to load the fdt if it's loaded above 256M on a Rock 2 board, so
79 * limit the fdt reallocation to that */
80 #define CONFIG_EXTRA_ENV_SETTINGS \
81 "fdt_high=0x0fffffff\0" \
82 "initrd_high=0x0fffffff\0" \
83 "partitions=" PARTS_DEFAULT \
84 ENV_MEM_LAYOUT_SETTINGS \
85 ROCKCHIP_DEVICE_SETTINGS \
86 BOOTENV
87 #endif
88
89 #define CONFIG_PREBOOT
90
91 #endif