include/configs/rk3399_common.h

   1 /*
   2  * (C) Copyright 2016 Rockchip Electronics Co., Ltd
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_RK3399_COMMON_H
   8 #define __CONFIG_RK3399_COMMON_H
   9
  10 #include "rockchip-common.h"
  11
  12 #define CONFIG_NR_DRAM_BANKS            1
  13 #define CONFIG_SYS_MALLOC_LEN           (32 << 20)
  14 #define CONFIG_SYS_CBSIZE               1024
  15 #define CONFIG_SKIP_LOWLEVEL_INIT
  16 #define CONFIG_SPL_FRAMEWORK
  17 #if defined(CONFIG_SPL_SPI_SUPPORT)
  18 #define CONFIG_SPL_SPI_LOAD
  19 #endif
  20
  21 #define COUNTER_FREQUENCY               24000000
  22
  23 #define CONFIG_SYS_NS16550_MEM32
  24
  25 #define CONFIG_SYS_TEXT_BASE            0x00200000
  26 #define CONFIG_SYS_INIT_SP_ADDR         0x00300000
  27 #define CONFIG_SYS_LOAD_ADDR            0x00800800
  28 #define CONFIG_SPL_STACK                0xff8effff
  29 #define CONFIG_SPL_TEXT_BASE            0xff8c2000
  30 #define CONFIG_SPL_MAX_SIZE             0x30000 - 0x2000
  31 /*  BSS setup */
  32 #define CONFIG_SPL_BSS_START_ADDR       0xff8e0000
  33 #define CONFIG_SPL_BSS_MAX_SIZE         0x10000
  34
  35 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* 64M */
  36
  37 /* MMC/SD IP block */
  38 #define CONFIG_BOUNCE_BUFFER
  39 #define CONFIG_ROCKCHIP_SDHCI_MAX_FREQ  200000000
  40
  41 #define CONFIG_SUPPORT_VFAT
  42
  43 /* RAW SD card / eMMC locations. */
  44 #define CONFIG_SYS_SPI_U_BOOT_OFFS      (128 << 10)
  45
  46 /* FAT sd card locations. */
  47 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
  48 #define CONFIG_SYS_SDRAM_BASE           0
  49 #define SDRAM_MAX_SIZE                  0xf8000000
  50 #define CONFIG_NR_DRAM_BANKS            1
  51
  52 #define CONFIG_SF_DEFAULT_SPEED 20000000
  53
  54 #ifndef CONFIG_SPL_BUILD
  55
  56 #define ENV_MEM_LAYOUT_SETTINGS \
  57         "scriptaddr=0x00500000\0" \
  58         "pxefile_addr_r=0x00600000\0" \
  59         "fdt_addr_r=0x01f00000\0" \
  60         "kernel_addr_r=0x02000000\0" \
  61         "ramdisk_addr_r=0x04000000\0"
  62
  63 #include <config_distro_bootcmd.h>
  64 #define CONFIG_EXTRA_ENV_SETTINGS \
  65         ENV_MEM_LAYOUT_SETTINGS \
  66         "partitions=" PARTS_DEFAULT \
  67         BOOTENV
  68
  69 #endif
  70
  71 /* enable usb config for usb ether */
  72
  73 #endif