]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/s5pc210_universal.h
Convert CONFIG_SYS_CONSOLE_IS_IN_ENV and CONFIG_CONSOLE_MUX to Kconfig
[people/ms/u-boot.git] / include / configs / s5pc210_universal.h
1 /*
2 * Copyright (C) 2010 Samsung Electronics
3 * Minkyu Kang <mk7.kang@samsung.com>
4 *
5 * Configuation settings for the SAMSUNG Universal (EXYNOS4210) board.
6 *
7 * SPDX-License-Identifier: GPL-2.0+
8 */
9
10 #ifndef __CONFIG_UNIVERSAL_H
11 #define __CONFIG_UNIVERSAL_H
12
13 #include <configs/exynos4-common.h>
14
15 #define CONFIG_TIZEN /* TIZEN lib */
16
17 /* Keep L2 Cache Disabled */
18 #define CONFIG_SYS_L2CACHE_OFF 1
19
20 /* Universal has 2 banks of DRAM */
21 #define CONFIG_NR_DRAM_BANKS 2
22 #define CONFIG_SYS_SDRAM_BASE 0x40000000
23 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
24
25 #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
26
27 /* select serial console configuration */
28 #define CONFIG_SERIAL2
29 #define CONFIG_BAUDRATE 115200
30
31 /* Console configuration */
32 #define CONFIG_SYS_CONSOLE_INFO_QUIET
33
34 #define CONFIG_BOOTARGS "Please use defined boot"
35 #define CONFIG_BOOTCOMMAND "run mmcboot"
36 #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
37
38 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
39 - GENERATED_GBL_DATA_SIZE)
40
41 #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */
42
43 #define CONFIG_SYS_MONITOR_BASE 0x00000000
44
45 /* memtest works on */
46 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
47 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000)
48 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000)
49
50 #define CONFIG_SYS_TEXT_BASE 0x44800000
51
52 #define CONFIG_MTD_DEVICE
53 #define CONFIG_MTD_PARTITIONS
54
55 /* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
56 #define MTDIDS_DEFAULT "onenand0=samsung-onenand"
57
58 #define MTDPARTS_DEFAULT "mtdparts=samsung-onenand:"\
59 "128k(s-boot)"\
60 ",896k(bootloader)"\
61 ",256k(params)"\
62 ",2816k(config)"\
63 ",8m(csa)"\
64 ",7m(kernel)"\
65 ",1m(log)"\
66 ",12m(modem)"\
67 ",60m(qboot)"\
68 ",-(UBI)\0"
69
70 #define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
71
72 #define MBRPARTS_DEFAULT "20M(permanent)"\
73 ",20M(boot)"\
74 ",1G(system)"\
75 ",100M(swap)"\
76 ",-(UMS)\0"
77
78 #define CONFIG_ENV_UBI_MTD " ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7"
79 #define CONFIG_BOOTBLOCK "10"
80 #define CONFIG_UBIBLOCK "9"
81
82 #define CONFIG_ENV_IS_IN_MMC
83 #define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV
84 #define CONFIG_ENV_SIZE 4096
85 #define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */
86
87 #define CONFIG_ENV_UBIFS_OPTION " rootflags=bulk_read,no_chk_data_crc "
88 #define CONFIG_ENV_FLASHBOOT CONFIG_ENV_UBI_MTD CONFIG_ENV_UBIFS_OPTION \
89 "${mtdparts}"
90
91 #define CONFIG_ENV_COMMON_BOOT "${console} ${meminfo}"
92
93 #define CONFIG_ENV_VARS_UBOOT_CONFIG
94 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
95
96 #define CONFIG_EXTRA_ENV_SETTINGS \
97 "updateb=" \
98 "onenand erase 0x0 0x100000;" \
99 "onenand write 0x42008000 0x0 0x100000\0" \
100 "updatek=" \
101 "onenand erase 0xc00000 0x500000;" \
102 "onenand write 0x41008000 0xc00000 0x500000\0" \
103 "bootk=" \
104 "run loaduimage; bootm 0x40007FC0\0" \
105 "updatebackup=" \
106 "mmc dev 0 2; mmc write 0 0x42100000 0 0x200;" \
107 "mmc dev 0 0\0" \
108 "updatebootb=" \
109 "mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
110 "lpj=lpj=3981312\0" \
111 "ubifsboot=" \
112 "set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \
113 CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
114 CONFIG_ENV_COMMON_BOOT "; run bootk\0" \
115 "tftpboot=" \
116 "set bootargs root=ubi0!rootfs rootfstype=ubifs " \
117 CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
118 CONFIG_ENV_COMMON_BOOT \
119 "; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \
120 "nfsboot=" \
121 "set bootargs root=/dev/nfs rw " \
122 "nfsroot=${nfsroot},nolock,tcp " \
123 "ip=${ipaddr}:${serverip}:${gatewayip}:" \
124 "${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
125 "; run bootk\0" \
126 "ramfsboot=" \
127 "set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
128 "${console} ${meminfo} " \
129 "initrd=0x43000000,8M ramdisk=8192\0" \
130 "mmcboot=" \
131 "set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
132 "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
133 "run loaduimage; bootm 0x40007FC0\0" \
134 "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
135 "boottrace=setenv opts initcall_debug; run bootcmd\0" \
136 "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
137 "verify=n\0" \
138 "rootfstype=ext4\0" \
139 "console=" CONFIG_DEFAULT_CONSOLE \
140 "mtdparts=" MTDPARTS_DEFAULT \
141 "mbrparts=" MBRPARTS_DEFAULT \
142 "meminfo=crashkernel=32M@0x50000000\0" \
143 "nfsroot=/nfsroot/arm\0" \
144 "bootblock=" CONFIG_BOOTBLOCK "\0" \
145 "ubiblock=" CONFIG_UBIBLOCK" \0" \
146 "ubi=enabled\0" \
147 "loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
148 "mmcdev=0\0" \
149 "mmcbootpart=2\0" \
150 "mmcrootpart=3\0" \
151 "opts=always_resume=1"
152
153 #define CONFIG_USE_ONENAND_BOARD_INIT
154 #define CONFIG_SAMSUNG_ONENAND
155 #define CONFIG_SYS_ONENAND_BASE 0x0C000000
156
157 #include <asm/arch/gpio.h>
158 /*
159 * I2C Settings
160 */
161 #define CONFIG_SOFT_I2C_GPIO_SCL EXYNOS4_GPIO_B7
162 #define CONFIG_SOFT_I2C_GPIO_SDA EXYNOS4_GPIO_B6
163
164 #define CONFIG_SYS_I2C
165 #define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
166 #define CONFIG_SYS_I2C_SOFT_SPEED 50000
167 #define CONFIG_SYS_I2C_SOFT_SLAVE 0
168 #define CONFIG_SOFT_I2C_READ_REPEATED_START
169 #define CONFIG_I2C_MULTI_BUS
170 #define CONFIG_SYS_MAX_I2C_BUS 7
171
172 #define CONFIG_POWER
173 #define CONFIG_POWER_I2C
174 #define CONFIG_POWER_MAX8998
175
176 #define CONFIG_USB_GADGET_DWC2_OTG_PHY
177
178 /*
179 * SPI Settings
180 */
181 #define CONFIG_SOFT_SPI
182
183 #ifndef __ASSEMBLY__
184 void universal_spi_scl(int bit);
185 void universal_spi_sda(int bit);
186 int universal_spi_read(void);
187 #endif
188
189 /* Common misc for Samsung */
190 #define CONFIG_MISC_COMMON
191
192 #define CONFIG_MISC_INIT_R
193
194 /* Download menu - Samsung common */
195 #define CONFIG_LCD_MENU
196 #define CONFIG_LCD_MENU_BOARD
197
198 /* Download menu - definitions for check keys */
199 #ifndef __ASSEMBLY__
200 #include <power/max8998_pmic.h>
201
202 #define KEY_PWR_PMIC_NAME "MAX8998_PMIC"
203 #define KEY_PWR_STATUS_REG MAX8998_REG_STATUS1
204 #define KEY_PWR_STATUS_MASK (1 << 7)
205 #define KEY_PWR_INTERRUPT_REG MAX8998_REG_IRQ1
206 #define KEY_PWR_INTERRUPT_MASK (1 << 7)
207
208 #define KEY_VOL_UP_GPIO EXYNOS4_GPIO_X20
209 #define KEY_VOL_DOWN_GPIO EXYNOS4_GPIO_X21
210 #endif /* __ASSEMBLY__ */
211
212 /* LCD console */
213 #define LCD_BPP LCD_COLOR16
214 #define CONFIG_SYS_WHITE_ON_BLACK
215
216 /*
217 * LCD Settings
218 */
219 #define CONFIG_BMP_16BPP
220 #define CONFIG_LD9040
221 #define CONFIG_VIDEO_BMP_GZIP
222 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
223
224 #endif /* __CONFIG_H */