include/configs/sbc8548.h

   1 /*
   2  * Copyright 2007,2009 Wind River Systems <www.windriver.com>
   3  * Copyright 2007 Embedded Specialties, Inc.
   4  * Copyright 2004, 2007 Freescale Semiconductor.
   5  *
   6  * See file CREDITS for list of people who contributed to this
   7  * project.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 of
  12  * the License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  22  * MA 02111-1307 USA
  23  */
  24
  25 /*
  26  * sbc8548 board configuration file
  27  * Please refer to doc/README.sbc8548 for more info.
  28  */
  29 #ifndef __CONFIG_H
  30 #define __CONFIG_H
  31
  32 /*
  33  * Top level Makefile configuration choices
  34  */
  35 #ifdef CONFIG_MK_PCI
  36 #define CONFIG_PCI
  37 #define CONFIG_PCI1
  38 #endif
  39
  40 #ifdef CONFIG_MK_66
  41 #define CONFIG_SYS_CLK_DIV 1
  42 #endif
  43
  44 #ifdef CONFIG_MK_33
  45 #define CONFIG_SYS_CLK_DIV 2
  46 #endif
  47
  48 #ifdef CONFIG_MK_PCIE
  49 #define CONFIG_PCIE1
  50 #endif
  51
  52 /*
  53  * High Level Configuration Options
  54  */
  55 #define CONFIG_BOOKE            1       /* BOOKE */
  56 #define CONFIG_E500             1       /* BOOKE e500 family */
  57 #define CONFIG_MPC85xx          1       /* MPC8540/60/55/41/48 */
  58 #define CONFIG_MPC8548          1       /* MPC8548 specific */
  59 #define CONFIG_SBC8548          1       /* SBC8548 board specific */
  60
  61 #undef CONFIG_RIO
  62
  63 #ifdef CONFIG_PCI
  64 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  65 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  66 #endif
  67 #ifdef CONFIG_PCIE1
  68 #define CONFIG_FSL_PCIE_RESET   1       /* need PCIe reset errata */
  69 #endif
  70
  71 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
  72 #define CONFIG_ENV_OVERWRITE
  73
  74 #define CONFIG_INTERRUPTS               /* enable pci, srio, ddr interrupts */
  75
  76 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  77
  78 /*
  79  * Below assumes that CCB:SYSCLK remains unchanged at 6:1 via SW2:[1-4]
  80  */
  81 #ifndef CONFIG_SYS_CLK_DIV
  82 #define CONFIG_SYS_CLK_DIV      1       /* 2, if 33MHz PCI card installed */
  83 #endif
  84 #define CONFIG_SYS_CLK_FREQ     (66000000 / CONFIG_SYS_CLK_DIV)
  85
  86 /*
  87  * These can be toggled for performance analysis, otherwise use default.
  88  */
  89 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  90 #define CONFIG_BTB                      /* toggle branch predition */
  91
  92 /*
  93  * Only possible on E500 Version 2 or newer cores.
  94  */
  95 #define CONFIG_ENABLE_36BIT_PHYS        1
  96
  97 #define CONFIG_BOARD_EARLY_INIT_F       1       /* Call board_pre_init */
  98
  99 #undef  CONFIG_SYS_DRAM_TEST                    /* memory test, takes time */
 100 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 101 #define CONFIG_SYS_MEMTEST_END          0x00400000
 102
 103 /*
 104  * Base addresses -- Note these are effective addresses where the
 105  * actual resources get mapped (not physical addresses)
 106  */
 107 #define CONFIG_SYS_CCSRBAR_DEFAULT      0xff700000      /* CCSRBAR Default */
 108 #define CONFIG_SYS_CCSRBAR              0xe0000000      /* relocated CCSRBAR */
 109 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
 110 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
 111
 112 /* DDR Setup */
 113 #define CONFIG_FSL_DDR2
 114 #undef CONFIG_FSL_DDR_INTERACTIVE
 115 #undef CONFIG_SPD_EEPROM                /* Use SPD EEPROM for DDR setup */
 116 #undef CONFIG_DDR_SPD
 117 #undef CONFIG_DDR_ECC                   /* only for ECC DDR module */
 118
 119 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER       /* DDR controller or DMA? */
 120 #define CONFIG_MEM_INIT_VALUE   0xDeadBeef
 121
 122 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 123 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 124 #define CONFIG_VERY_BIG_RAM
 125
 126 #define CONFIG_NUM_DDR_CONTROLLERS      1
 127 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 128 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
 129
 130 /* I2C addresses of SPD EEPROMs */
 131 #define SPD_EEPROM_ADDRESS      0x51    /* CTLR 0 DIMM 0 */
 132
 133 /*
 134  * Make sure required options are set
 135  */
 136 #ifndef CONFIG_SPD_EEPROM
 137         #define CONFIG_SYS_SDRAM_SIZE   256             /* DDR is 256MB */
 138 #endif
 139
 140 #undef CONFIG_CLOCKS_IN_MHZ
 141
 142 /*
 143  * FLASH on the Local Bus
 144  * Two banks, one 8MB the other 64MB, using the CFI driver.
 145  * Boot from BR0/OR0 bank at 0xff80_0000
 146  * Alternate BR6/OR6 bank at 0xfb80_0000
 147  *
 148  * BR0:
 149  *    Base address 0 = 0xff80_0000 = BR0[0:16] = 1111 1111 1000 0000 0
 150  *    Port Size = 8 bits = BRx[19:20] = 01
 151  *    Use GPCM = BRx[24:26] = 000
 152  *    Valid = BRx[31] = 1
 153  *
 154  * 0    4    8    12   16   20   24   28
 155  * 1111 1111 1000 0000 0000 1000 0000 0001 = ff800801    BR0
 156  *
 157  * BR6:
 158  *    Base address 6 = 0xfb80_0000 = BR6[0:16] = 1111 1011 1000 0000 0
 159  *    Port Size = 32 bits = BRx[19:20] = 11
 160  *    Use GPCM = BRx[24:26] = 000
 161  *    Valid = BRx[31] = 1
 162  *
 163  * 0    4    8    12   16   20   24   28
 164  * 1111 1011 1000 0000 0001 1000 0000 0001 = fb801801    BR6
 165  *
 166  * OR0:
 167  *    Addr Mask = 8M = OR1[0:16] = 1111 1111 1000 0000 0
 168  *    XAM = OR0[17:18] = 11
 169  *    CSNT = OR0[20] = 1
 170  *    ACS = half cycle delay = OR0[21:22] = 11
 171  *    SCY = 6 = OR0[24:27] = 0110
 172  *    TRLX = use relaxed timing = OR0[29] = 1
 173  *    EAD = use external address latch delay = OR0[31] = 1
 174  *
 175  * 0    4    8    12   16   20   24   28
 176  * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65    OR0
 177  *
 178  * OR6:
 179  *    Addr Mask = 64M = OR6[0:16] = 1111 1000 0000 0000 0
 180  *    XAM = OR6[17:18] = 11
 181  *    CSNT = OR6[20] = 1
 182  *    ACS = half cycle delay = OR6[21:22] = 11
 183  *    SCY = 6 = OR6[24:27] = 0110
 184  *    TRLX = use relaxed timing = OR6[29] = 1
 185  *    EAD = use external address latch delay = OR6[31] = 1
 186  *
 187  * 0    4    8    12   16   20   24   28
 188  * 1111 1000 0000 0000 0110 1110 0110 0101 = f8006e65    OR6
 189  */
 190
 191 #define CONFIG_SYS_BOOT_BLOCK           0xff800000      /* start of 8MB Flash */
 192 #define CONFIG_SYS_ALT_FLASH            0xfb800000      /* 64MB "user" flash */
 193 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_BOOT_BLOCK   /* start of FLASH 16M */
 194
 195 #define CONFIG_SYS_BR0_PRELIM           0xff800801
 196 #define CONFIG_SYS_BR6_PRELIM           0xfb801801
 197
 198 #define CONFIG_SYS_OR0_PRELIM           0xff806e65
 199 #define CONFIG_SYS_OR6_PRELIM           0xf8006e65
 200
 201 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE, \
 202                                          CONFIG_SYS_ALT_FLASH}
 203 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 204 #define CONFIG_SYS_MAX_FLASH_SECT       256             /* sectors per device */
 205 #undef  CONFIG_SYS_FLASH_CHECKSUM
 206 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 207 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 208
 209 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE       /* start of monitor */
 210
 211 #define CONFIG_FLASH_CFI_DRIVER
 212 #define CONFIG_SYS_FLASH_CFI
 213 #define CONFIG_SYS_FLASH_EMPTY_INFO
 214
 215 /* CS5 = Local bus peripherals controlled by the EPLD */
 216
 217 #define CONFIG_SYS_BR5_PRELIM           0xf8000801
 218 #define CONFIG_SYS_OR5_PRELIM           0xff006e65
 219 #define CONFIG_SYS_EPLD_BASE            0xf8000000
 220 #define CONFIG_SYS_LED_DISP_BASE        0xf8000000
 221 #define CONFIG_SYS_USER_SWITCHES_BASE   0xf8100000
 222 #define CONFIG_SYS_BD_REV               0xf8300000
 223 #define CONFIG_SYS_EEPROM_BASE          0xf8b00000
 224
 225 /*
 226  * SDRAM on the Local Bus (CS3 and CS4)
 227  */
 228 #define CONFIG_SYS_LBC_SDRAM_BASE       0xf0000000      /* Localbus SDRAM */
 229 #define CONFIG_SYS_LBC_SDRAM_SIZE       128             /* LBC SDRAM is 128MB */
 230
 231 /*
 232  * Base Register 3 and Option Register 3 configure the 1st 1/2 SDRAM.
 233  * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
 234  *
 235  * For BR3, need:
 236  *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
 237  *    port-size = 32-bits = BR2[19:20] = 11
 238  *    no parity checking = BR2[21:22] = 00
 239  *    SDRAM for MSEL = BR2[24:26] = 011
 240  *    Valid = BR[31] = 1
 241  *
 242  * 0    4    8    12   16   20   24   28
 243  * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
 244  *
 245  */
 246
 247 #define CONFIG_SYS_BR3_PRELIM           0xf0001861
 248
 249 /*
 250  * The SDRAM size in MB, of 1/2 CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
 251  *
 252  * For OR3, need:
 253  *    64MB mask for AM, OR3[0:7] = 1111 1100
 254  *                 XAM, OR3[17:18] = 11
 255  *    10 columns OR3[19-21] = 011
 256  *    12 rows   OR3[23-25] = 011
 257  *    EAD set for extra time OR[31] = 0
 258  *
 259  * 0    4    8    12   16   20   24   28
 260  * 1111 1100 0000 0000 0110 1100 1100 0000 = fc006cc0
 261  */
 262
 263 #define CONFIG_SYS_OR3_PRELIM           0xfc006cc0
 264
 265 /*
 266  * Base Register 4 and Option Register 4 configure the 2nd 1/2 SDRAM.
 267  * The base address, (SDRAM_BASE + 1/2*SIZE), is 0xf4000000.
 268  *
 269  * For BR4, need:
 270  *    Base address of 0xf4000000 = BR[0:16] = 1111 0100 0000 0000 0
 271  *    port-size = 32-bits = BR2[19:20] = 11
 272  *    no parity checking = BR2[21:22] = 00
 273  *    SDRAM for MSEL = BR2[24:26] = 011
 274  *    Valid = BR[31] = 1
 275  *
 276  * 0    4    8    12   16   20   24   28
 277  * 1111 0000 0000 0000 0001 1000 0110 0001 = f4001861
 278  *
 279  */
 280
 281 #define CONFIG_SYS_BR4_PRELIM           0xf4001861
 282
 283 /*
 284  * The SDRAM size in MB, of 1/2 CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
 285  *
 286  * For OR4, need:
 287  *    64MB mask for AM, OR3[0:7] = 1111 1100
 288  *                 XAM, OR3[17:18] = 11
 289  *    10 columns OR3[19-21] = 011
 290  *    12 rows   OR3[23-25] = 011
 291  *    EAD set for extra time OR[31] = 0
 292  *
 293  * 0    4    8    12   16   20   24   28
 294  * 1111 1100 0000 0000 0110 1100 1100 0000 = fc006cc0
 295  */
 296
 297 #define CONFIG_SYS_OR4_PRELIM           0xfc006cc0
 298
 299 #define CONFIG_SYS_LBC_LCRR             0x00000002    /* LB clock ratio reg */
 300 #define CONFIG_SYS_LBC_LBCR             0x00000000    /* LB config reg */
 301 #define CONFIG_SYS_LBC_LSRT             0x20000000  /* LB sdram refresh timer */
 302 #define CONFIG_SYS_LBC_MRTPR            0x00000000  /* LB refresh timer prescal*/
 303
 304 /*
 305  * Common settings for all Local Bus SDRAM commands.
 306  * At run time, either BSMA1516 (for CPU 1.1)
 307  *                  or BSMA1617 (for CPU 1.0) (old)
 308  * is OR'ed in too.
 309  */
 310 #define CONFIG_SYS_LBC_LSDMR_COMMON     ( LSDMR_RFCR16          \
 311                                 | LSDMR_PRETOACT7       \
 312                                 | LSDMR_ACTTORW7        \
 313                                 | LSDMR_BL8             \
 314                                 | LSDMR_WRC4            \
 315                                 | LSDMR_CL3             \
 316                                 | LSDMR_RFEN            \
 317                                 )
 318
 319 #define CONFIG_SYS_INIT_RAM_LOCK        1
 320 #define CONFIG_SYS_INIT_RAM_ADDR        0xe4010000      /* Initial RAM address */
 321 #define CONFIG_SYS_INIT_RAM_END 0x4000          /* End of used area in RAM */
 322
 323 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000      /* relocate boot L2SRAM */
 324
 325 #define CONFIG_SYS_GBL_DATA_SIZE        128             /* num bytes initial data */
 326 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 327 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 328
 329 /*
 330  * For soldered on flash, (128kB/sector) we use 2 sectors for u-boot and
 331  * one for env+bootpg (TEXT_BASE=0xfffa_0000, 384kB total).  For SODIMM
 332  * flash (512kB/sector) we use 1 sector for u-boot, and one for env+bootpg
 333  * (TEXT_BASE=0xfff0_0000, 1MB total).  This dynamically sets the right
 334  * thing for MONITOR_LEN in both cases.
 335  */
 336 #define CONFIG_SYS_MONITOR_LEN          (~TEXT_BASE + 1)
 337 #define CONFIG_SYS_MALLOC_LEN           (128 * 1024)    /* Reserved for malloc */
 338
 339 /* Serial Port */
 340 #define CONFIG_CONS_INDEX       1
 341 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 342 #define CONFIG_SYS_NS16550
 343 #define CONFIG_SYS_NS16550_SERIAL
 344 #define CONFIG_SYS_NS16550_REG_SIZE     1
 345 #define CONFIG_SYS_NS16550_CLK          (400000000 / CONFIG_SYS_CLK_DIV)
 346
 347 #define CONFIG_SYS_BAUDRATE_TABLE \
 348         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 349
 350 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 351 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 352
 353 /* Use the HUSH parser */
 354 #define CONFIG_SYS_HUSH_PARSER
 355 #ifdef  CONFIG_SYS_HUSH_PARSER
 356 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 357 #endif
 358
 359 /* pass open firmware flat tree */
 360 #define CONFIG_OF_LIBFDT                1
 361 #define CONFIG_OF_BOARD_SETUP           1
 362 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 363
 364 /*
 365  * I2C
 366  */
 367 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
 368 #define CONFIG_HARD_I2C         /* I2C with hardware support*/
 369 #undef  CONFIG_SOFT_I2C         /* I2C bit-banged */
 370 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address */
 371 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 372 #define CONFIG_SYS_I2C_SLAVE            0x7F
 373 #define CONFIG_SYS_I2C_OFFSET           0x3000
 374
 375 /*
 376  * General PCI
 377  * Memory space is mapped 1-1, but I/O space must start from 0.
 378  */
 379 #define CONFIG_SYS_PCI_VIRT             0x80000000      /* 1G PCI TLB */
 380 #define CONFIG_SYS_PCI_PHYS             0x80000000      /* 1G PCI TLB */
 381
 382 #define CONFIG_SYS_PCI1_MEM_VIRT        0x80000000
 383 #define CONFIG_SYS_PCI1_MEM_BUS         0x80000000
 384 #define CONFIG_SYS_PCI1_MEM_PHYS        0x80000000
 385 #define CONFIG_SYS_PCI1_MEM_SIZE        0x20000000      /* 512M */
 386 #define CONFIG_SYS_PCI1_IO_VIRT         0xe2000000
 387 #define CONFIG_SYS_PCI1_IO_BUS          0x00000000
 388 #define CONFIG_SYS_PCI1_IO_PHYS         0xe2000000
 389 #define CONFIG_SYS_PCI1_IO_SIZE         0x00800000      /* 8M */
 390
 391 #ifdef CONFIG_PCIE1
 392 #define CONFIG_SYS_PCIE1_MEM_VIRT       0xa0000000
 393 #define CONFIG_SYS_PCIE1_MEM_BUS        0xa0000000
 394 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xa0000000
 395 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 396 #define CONFIG_SYS_PCIE1_IO_VIRT        0xe2800000
 397 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 398 #define CONFIG_SYS_PCIE1_IO_PHYS        0xe2800000
 399 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00800000      /* 8M */
 400 #endif
 401
 402 #ifdef CONFIG_RIO
 403 /*
 404  * RapidIO MMU
 405  */
 406 #define CONFIG_SYS_RIO_MEM_BASE 0xC0000000
 407 #define CONFIG_SYS_RIO_MEM_SIZE 0x20000000      /* 512M */
 408 #endif
 409
 410 #if defined(CONFIG_PCI)
 411
 412 #define CONFIG_NET_MULTI
 413 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 414
 415 #undef CONFIG_EEPRO100
 416 #undef CONFIG_TULIP
 417
 418 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 419
 420 #endif  /* CONFIG_PCI */
 421
 422
 423 #if defined(CONFIG_TSEC_ENET)
 424
 425 #ifndef CONFIG_NET_MULTI
 426 #define CONFIG_NET_MULTI        1
 427 #endif
 428
 429 #define CONFIG_MII              1       /* MII PHY management */
 430 #define CONFIG_TSEC1    1
 431 #define CONFIG_TSEC1_NAME       "eTSEC0"
 432 #define CONFIG_TSEC2    1
 433 #define CONFIG_TSEC2_NAME       "eTSEC1"
 434 #undef CONFIG_MPC85XX_FEC
 435
 436 #define TSEC1_PHY_ADDR          0x19
 437 #define TSEC2_PHY_ADDR          0x1a
 438
 439 #define TSEC1_PHYIDX            0
 440 #define TSEC2_PHYIDX            0
 441
 442 #define TSEC1_FLAGS             TSEC_GIGABIT
 443 #define TSEC2_FLAGS             TSEC_GIGABIT
 444
 445 /* Options are: eTSEC[0-3] */
 446 #define CONFIG_ETHPRIME         "eTSEC0"
 447 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 448 #endif  /* CONFIG_TSEC_ENET */
 449
 450 /*
 451  * Environment
 452  */
 453 #define CONFIG_ENV_IS_IN_FLASH  1
 454 #define CONFIG_ENV_SIZE         0x2000
 455 #if TEXT_BASE == 0xfff00000     /* Boot from 64MB SODIMM */
 456 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + 0x80000)
 457 #define CONFIG_ENV_SECT_SIZE    0x80000 /* 512K(one sector) for env */
 458 #elif TEXT_BASE == 0xfffa0000   /* Boot from 8MB soldered flash */
 459 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + 0x40000)
 460 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K(one sector) for env */
 461 #else
 462 #warning undefined environment size/location.
 463 #endif
 464
 465 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 466 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 467
 468 /*
 469  * BOOTP options
 470  */
 471 #define CONFIG_BOOTP_BOOTFILESIZE
 472 #define CONFIG_BOOTP_BOOTPATH
 473 #define CONFIG_BOOTP_GATEWAY
 474 #define CONFIG_BOOTP_HOSTNAME
 475
 476
 477 /*
 478  * Command line configuration.
 479  */
 480 #include <config_cmd_default.h>
 481
 482 #define CONFIG_CMD_PING
 483 #define CONFIG_CMD_I2C
 484 #define CONFIG_CMD_MII
 485 #define CONFIG_CMD_ELF
 486 #define CONFIG_CMD_REGINFO
 487
 488 #if defined(CONFIG_PCI)
 489     #define CONFIG_CMD_PCI
 490 #endif
 491
 492
 493 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 494
 495 /*
 496  * Miscellaneous configurable options
 497  */
 498 #define CONFIG_CMDLINE_EDITING                  /* undef to save memory */
 499 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 500 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 501 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 502 #if defined(CONFIG_CMD_KGDB)
 503 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 504 #else
 505 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 506 #endif
 507 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 508 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 509 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 510 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks */
 511
 512 /*
 513  * For booting Linux, the board info and command line data
 514  * have to be in the first 8 MB of memory, since this is
 515  * the maximum mapped by the Linux kernel during initialization.
 516  */
 517 #define CONFIG_SYS_BOOTMAPSZ    (8 << 20)       /* Initial Memory map for Linux*/
 518
 519 /*
 520  * Internal Definitions
 521  *
 522  * Boot Flags
 523  */
 524 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH */
 525 #define BOOTFLAG_WARM   0x02            /* Software reboot */
 526
 527 #if defined(CONFIG_CMD_KGDB)
 528 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 529 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 530 #endif
 531
 532 /*
 533  * Environment Configuration
 534  */
 535
 536 /* The mac addresses for all ethernet interface */
 537 #if defined(CONFIG_TSEC_ENET)
 538 #define CONFIG_HAS_ETH0
 539 #define CONFIG_ETHADDR   02:E0:0C:00:00:FD
 540 #define CONFIG_HAS_ETH1
 541 #define CONFIG_ETH1ADDR  02:E0:0C:00:01:FD
 542 #endif
 543
 544 #define CONFIG_IPADDR    192.168.0.55
 545
 546 #define CONFIG_HOSTNAME  sbc8548
 547 #define CONFIG_ROOTPATH  /opt/eldk/ppc_85xx
 548 #define CONFIG_BOOTFILE  /uImage
 549 #define CONFIG_UBOOTPATH /u-boot.bin    /* TFTP server */
 550
 551 #define CONFIG_SERVERIP  192.168.0.2
 552 #define CONFIG_GATEWAYIP 192.168.0.1
 553 #define CONFIG_NETMASK   255.255.255.0
 554
 555 #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/
 556
 557 #define CONFIG_BOOTDELAY 10     /* -1 disables auto-boot */
 558 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs*/
 559
 560 #define CONFIG_BAUDRATE 115200
 561
 562 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 563  "netdev=eth0\0"                                                \
 564  "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                         \
 565  "tftpflash=tftpboot $loadaddr $uboot; "                        \
 566         "protect off " MK_STR(TEXT_BASE) " +$filesize; "        \
 567         "erase " MK_STR(TEXT_BASE) " +$filesize; "              \
 568         "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "      \
 569         "protect on " MK_STR(TEXT_BASE) " +$filesize; "         \
 570         "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"     \
 571  "consoledev=ttyS0\0"                           \
 572  "ramdiskaddr=2000000\0"                        \
 573  "ramdiskfile=uRamdisk\0"                       \
 574  "fdtaddr=c00000\0"                             \
 575  "fdtfile=sbc8548.dtb\0"
 576
 577 #define CONFIG_NFSBOOTCOMMAND                                           \
 578    "setenv bootargs root=/dev/nfs rw "                                  \
 579       "nfsroot=$serverip:$rootpath "                                    \
 580       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 581       "console=$consoledev,$baudrate $othbootargs;"                     \
 582    "tftp $loadaddr $bootfile;"                                          \
 583    "tftp $fdtaddr $fdtfile;"                                            \
 584    "bootm $loadaddr - $fdtaddr"
 585
 586
 587 #define CONFIG_RAMBOOTCOMMAND \
 588    "setenv bootargs root=/dev/ram rw "                                  \
 589       "console=$consoledev,$baudrate $othbootargs;"                     \
 590    "tftp $ramdiskaddr $ramdiskfile;"                                    \
 591    "tftp $loadaddr $bootfile;"                                          \
 592    "tftp $fdtaddr $fdtfile;"                                            \
 593    "bootm $loadaddr $ramdiskaddr $fdtaddr"
 594
 595 #define CONFIG_BOOTCOMMAND      CONFIG_RAMBOOTCOMMAND
 596
 597 #endif  /* __CONFIG_H */