include/configs/seaboard.h

   1 /*
   2  *  (C) Copyright 2010,2011
   3  *  NVIDIA Corporation <www.nvidia.com>
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 #ifndef __CONFIG_H
  25 #define __CONFIG_H
  26
  27 #include <asm/sizes.h>
  28
  29 /* LP0 suspend / resume */
  30 #define CONFIG_TEGRA2_LP0
  31 #define CONFIG_AES
  32 #define CONFIG_TEGRA_PMU
  33 #define CONFIG_TPS6586X_POWER
  34 #define CONFIG_TEGRA_CLOCK_SCALING
  35
  36 #include "tegra2-common.h"
  37
  38 /* Enable fdt support for Seaboard. Flash the image in u-boot-dtb.bin */
  39 #define CONFIG_DEFAULT_DEVICE_TREE      tegra2-seaboard
  40 #define CONFIG_OF_CONTROL
  41 #define CONFIG_OF_SEPARATE
  42
  43 /* High-level configuration options */
  44 #define TEGRA2_SYSMEM           "mem=384M@0M nvmem=128M@384M mem=512M@512M"
  45 #define V_PROMPT                "Tegra2 (SeaBoard) # "
  46 #define CONFIG_TEGRA2_BOARD_STRING      "NVIDIA Seaboard"
  47
  48 /* Board-specific serial config */
  49 #define CONFIG_SERIAL_MULTI
  50 #define CONFIG_TEGRA2_ENABLE_UARTD
  51 #define CONFIG_SYS_NS16550_COM1         NV_PA_APB_UARTD_BASE
  52
  53 /* On Seaboard: GPIO_PI3 = Port I = 8, bit = 3 */
  54 #define CONFIG_UART_DISABLE_GPIO        GPIO_PI3
  55
  56 #define CONFIG_MACH_TYPE                MACH_TYPE_SEABOARD
  57 #define CONFIG_SYS_BOARD_ODMDATA        0x300d8011 /* lp1, 1GB */
  58
  59 #define CONFIG_BOARD_EARLY_INIT_F
  60
  61 /* SPI */
  62 #define CONFIG_TEGRA2_SPI
  63 #define CONFIG_SPI_FLASH
  64 #define CONFIG_SPI_FLASH_WINBOND
  65 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  66 #define CONFIG_CMD_SPI
  67 #define CONFIG_CMD_SF
  68 #define CONFIG_SPI_FLASH_SIZE           (4 << 20)
  69
  70 /* I2C */
  71 #define CONFIG_TEGRA_I2C
  72 #define CONFIG_SYS_I2C_INIT_BOARD
  73 #define CONFIG_I2C_MULTI_BUS
  74 #define CONFIG_SYS_MAX_I2C_BUS          4
  75 #define CONFIG_SYS_I2C_SPEED            100000
  76 #define CONFIG_CMD_I2C
  77
  78 /* SD/MMC */
  79 #define CONFIG_MMC
  80 #define CONFIG_GENERIC_MMC
  81 #define CONFIG_TEGRA2_MMC
  82 #define CONFIG_CMD_MMC
  83
  84 #define CONFIG_DOS_PARTITION
  85 #define CONFIG_EFI_PARTITION
  86 #define CONFIG_CMD_EXT2
  87 #define CONFIG_CMD_FAT
  88
  89 /* Environment in SPI */
  90 #define CONFIG_ENV_IS_IN_SPI_FLASH
  91 #define CONFIG_ENV_SPI_MAX_HZ           48000000
  92 #define CONFIG_ENV_SPI_MODE             SPI_MODE_0
  93
  94 #define CONFIG_ENV_SECT_SIZE    CONFIG_ENV_SIZE
  95 #define CONFIG_ENV_OFFSET       (CONFIG_SPI_FLASH_SIZE - CONFIG_ENV_SECT_SIZE)
  96
  97 /* USB Host support */
  98 #define CONFIG_USB_EHCI
  99 #define CONFIG_USB_EHCI_TEGRA
 100 #define CONFIG_USB_STORAGE
 101 #define CONFIG_CMD_USB
 102
 103 /* Enable keyboard */
 104 #define CONFIG_TEGRA2_KEYBOARD
 105 #define CONFIG_KEYBOARD
 106
 107 #undef TEGRA2_DEVICE_SETTINGS
 108 #define TEGRA2_DEVICE_SETTINGS  "stdin=serial,tegra-kbc\0" \
 109                                         "stdout=serial\0" \
 110                                         "stderr=serial\0"
 111 #endif /* __CONFIG_H */