]>
git.ipfire.org Git - thirdparty/u-boot.git/blob - include/configs/secomx6quq7.h
2 * Copyright (C) 2013 Seco S.r.l
4 * Configuration settings for the Seco Boards.
6 * SPDX-License-Identifier: GPL-2.0+
12 #include "mx6_common.h"
14 #define CONFIG_BOARD_REVISION_TAG
16 /* Size of malloc() pool */
17 #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
19 #define CONFIG_BOARD_EARLY_INIT_F
21 #define CONFIG_MXC_UART
22 #define CONFIG_MXC_UART_BASE UART2_BASE
24 /* Command definition */
25 #define CONFIG_CMD_BMODE
27 #define CONFIG_SYS_MEMTEST_START 0x10000000
28 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
30 /* MMC Configuration */
31 #define CONFIG_SYS_FSL_USDHC_NUM 2
32 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
34 /* Ethernet Configuration */
35 #define CONFIG_CMD_MII
36 #define CONFIG_FEC_MXC
38 #define IMX_FEC_BASE ENET_BASE_ADDR
39 #define CONFIG_FEC_XCV_TYPE RGMII
40 #define CONFIG_ETHPRIME "FEC"
41 #define CONFIG_FEC_MXC_PHYADDR 6
43 #define CONFIG_PHY_MICREL
45 #define CONFIG_EXTRA_ENV_SETTINGS \
50 "uboot=u-boot.bin\0" \
52 "nfsroot=/opt/eldk/arm\0" \
53 "ip_local=10.0.0.5::10.0.0.1:255.255.255.0::eth0:off\0" \
54 "ip_server=10.0.0.1\0" \
55 "nfs_path=/targetfs \0" \
56 "memory=mem=1024M\0" \
57 "bootdev=mmc dev 0; ext2load mmc 0:1\0" \
58 "root=root=/dev/mmcblk0p1\0" \
59 "option=rootwait rw fixrtc rootflags=barrier=1\0" \
60 "cpu_freq=arm_freq=996\0" \
61 "setbootargs=setenv bootargs console=ttymxc1,115200 ${root}" \
62 " ${option} ${memory} ${cpu_freq}\0" \
63 "setbootargs_nfs=setenv bootargs console=ttymxc1,115200" \
64 " root=/dev/nfs nfsroot=${ip_server}:${nfs_path}" \
65 " nolock,wsize=4096,rsize=4096 ip=:::::eth0:dhcp" \
66 " ${memory} ${cpu_freq}\0" \
67 "setbootdev=setenv boot_dev ${bootdev} 10800000 /boot/uImage\0" \
68 "bootcmd=run setbootargs; run setbootdev; run boot_dev;" \
69 " bootm 0x10800000\0" \
75 /* Print Buffer Size */
76 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
77 sizeof(CONFIG_SYS_PROMPT) + 16)
79 #define CONFIG_SYS_HZ 1000
81 /* Physical Memory Map */
82 #define CONFIG_NR_DRAM_BANKS 1
83 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
84 #define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024)
86 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
87 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
88 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
90 #define CONFIG_SYS_INIT_SP_OFFSET \
91 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
92 #define CONFIG_SYS_INIT_SP_ADDR \
93 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
95 /* Environment organization */
96 #define CONFIG_ENV_SIZE (8 * 1024)
98 #if defined(CONFIG_ENV_IS_IN_MMC)
99 #define CONFIG_ENV_OFFSET (6 * 128 * 1024)
100 #define CONFIG_SYS_MMC_ENV_DEV 0
101 #define CONFIG_DYNAMIC_MMC_DEVNO
104 #endif /* __CONFIG_H */