]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/shmin.h
SGMII:fix PHY addresses for QSGMII Riser Card working in SGMII mode
[people/ms/u-boot.git] / include / configs / shmin.h
1 /*
2 * Configuation settings for shmin (T-SH7706LAN, T-SH7706LSR)
3 *
4 * Copyright (C) 2010, 2011 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9 #ifndef __SHMIN_H
10 #define __SHMIN_H
11
12 #define CONFIG_SH 1
13 #define CONFIG_SH3 1
14 #define CONFIG_CPU_SH7706 1
15 /* T-SH7706LAN */
16 #define CONFIG_SHMIN 1
17 /* T-SH7706LSR*/
18 /* #define CONFIG_T_SH7706LSR 1 */
19
20 #define CONFIG_CMD_FLASH
21 #define CONFIG_CMD_MEMORY
22 #define CONFIG_CMD_SDRAM
23 #define CONFIG_CMD_NET
24 #define CONFIG_CMD_PING
25 #define CONFIG_CMD_NFS
26 #define CONFIG_CMD_ENV
27 #define CONFIG_CMD_SAVEENV
28
29 #define CONFIG_BAUDRATE 115200
30 #define CONFIG_BOOTARGS "console=ttySC0,115200"
31
32 /*
33 * This board has original boot loader. If you write u-boot to 0x0,
34 * you should set undef.
35 */
36 #define CONFIG_VERSION_VARIABLE
37 #undef CONFIG_SHOW_BOOT_PROGRESS
38
39 /* system */
40 #define SHMIN_SDRAM_BASE (0x8C000000)
41 #define SHMIN_FLASH_BASE_1 (0xA0000000)
42
43 #define CONFIG_SYS_TEXT_BASE 0x8DFB0000
44 #define CONFIG_SYS_LONGHELP /* undef to save memory */
45 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
46 #define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */
47 #define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */
48 #define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */
49 /* Buffer size for Boot Arguments passed to kernel */
50 #define CONFIG_SYS_BARGSIZE 512
51 /* List of legal baudrate settings for this board */
52 #define CONFIG_SYS_BAUDRATE_TABLE { 9600,14400,19200,38400,57600,115200 }
53
54 /* SCIF */
55 #define CONFIG_SCIF_CONSOLE 1
56 #define CONFIG_CONS_SCIF0 1
57
58 /* memory */
59 #define CONFIG_SYS_SDRAM_BASE SHMIN_SDRAM_BASE
60 #define CONFIG_SYS_SDRAM_SIZE (32 * 1024 * 1024)
61 #define CONFIG_SYS_MEMTEST_START SHMIN_SDRAM_BASE
62 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE - (256 * 1024))
63
64 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 1 * 1024 * 1024)
65 #define CONFIG_SYS_MONITOR_BASE (SHMIN_FLASH_BASE_1 + CONFIG_ENV_SECT_SIZE)
66 #define CONFIG_SYS_MONITOR_LEN (128 * 1024)
67 #define CONFIG_SYS_MALLOC_LEN (256 * 1024)
68 #define CONFIG_SYS_GBL_DATA_SIZE 256
69 #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
70
71 /* FLASH */
72 #define CONFIG_SYS_FLASH_CFI
73 #define CONFIG_FLASH_CFI_DRIVER
74 #undef CONFIG_SYS_FLASH_QUIET_TEST
75 #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
76 #define CONFIG_SYS_FLASH_BASE SHMIN_FLASH_BASE_1
77 #define CONFIG_SYS_MAX_FLASH_SECT 11
78 #define CONFIG_SYS_MAX_FLASH_BANKS 1
79
80 #define CONFIG_FLASH_CFI_LEGACY
81 #define CONFIG_SYS_ATMEL_BASE CONFIG_SYS_FLASH_BASE
82 #define CONFIG_SYS_ATMEL_TOTALSECT CONFIG_SYS_MAX_FLASH_SECT
83 #define CONFIG_SYS_ATMEL_REGION 4
84 #define CONFIG_SYS_ATMEL_SECT {1, 2, 1, 7}
85 #define CONFIG_SYS_ATMEL_SECTSZ {0x4000, 0x2000, 0x8000, 0x10000}
86
87 #define CONFIG_ENV_IS_IN_FLASH
88 #define CONFIG_ENV_SECT_SIZE (64 * 1024)
89 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
90
91 #ifdef CONFIG_T_SH7706LSR
92 #define CONFIG_ENV_ADDR (SHMIN_FLASH_BASE_1 + 70000)
93 #else
94 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
95 #endif
96
97 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000
98 #define CONFIG_SYS_FLASH_WRITE_TOUT 500
99
100 /* Board Clock */
101 #ifdef CONFIG_T_SH7706LSR
102 #define CONFIG_SYS_CLK_FREQ 40000000
103 #else
104 #define CONFIG_SYS_CLK_FREQ 33333333
105 #endif /* CONFIG_T_SH7706LSR */
106 #define CONFIG_SYS_TMU_CLK_DIV 4
107 #define CONFIG_SYS_HZ 1000
108
109 /* Network device */
110 #define CONFIG_DRIVER_NE2000
111 #define CONFIG_DRIVER_NE2000_BASE (0xb0000300)
112
113 #endif /* __SHMIN_H */