include/configs/siemens-am33x-common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * siemens am33x common board options
   4  * (C) Copyright 2013 Siemens Schweiz AG
   5  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
   6  *
   7  * Based on:
   8  * U-Boot file:/include/configs/am335x_evm.h
   9  *
  10  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
  11  */
  12
  13 #ifndef __CONFIG_SIEMENS_AM33X_COMMON_H
  14 #define __CONFIG_SIEMENS_AM33X_COMMON_H
  15
  16 #include <asm/arch/omap.h>
  17
  18 #define CONFIG_DMA_COHERENT
  19 #define CONFIG_DMA_COHERENT_SIZE        (1 << 20)
  20
  21 #define CONFIG_SYS_MALLOC_LEN           (16 * 1024 * 1024)
  22 #ifdef CONFIG_SIEMENS_MACH_TYPE
  23 #define CONFIG_MACH_TYPE                CONFIG_SIEMENS_MACH_TYPE
  24 #endif
  25
  26 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  27 #define CONFIG_SETUP_MEMORY_TAGS
  28 #define CONFIG_INITRD_TAG
  29
  30 /* commands to include */
  31
  32 #ifndef CONFIG_SPL_BUILD
  33 #define CONFIG_ROOTPATH         "/opt/eldk"
  34 #endif
  35
  36 #define CONFIG_ENV_OVERWRITE            1
  37
  38 #define CONFIG_SYS_AUTOLOAD     "yes"
  39
  40 /* Clock Defines */
  41 #define V_OSCK                          24000000  /* Clock output from T2 */
  42 #define V_SCLK                          (V_OSCK)
  43
  44 /* We set the max number of command args high to avoid HUSH bugs. */
  45 #define CONFIG_SYS_MAXARGS              32
  46
  47 /* Console I/O Buffer Size */
  48 #define CONFIG_SYS_CBSIZE               1024
  49
  50 /* Boot Argument Buffer Size */
  51 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
  52
  53 /*
  54  * memtest works on 8 MB in DRAM after skipping 32MB from
  55  * start addr of ram disk
  56  */
  57 #define CONFIG_SYS_MEMTEST_START        (PHYS_DRAM_1 + (64 * 1024 * 1024))
  58 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START \
  59                                         + (8 * 1024 * 1024))
  60
  61 #define CONFIG_SYS_LOAD_ADDR            0x81000000 /* Default load address */
  62
  63  /* Physical Memory Map */
  64 #define PHYS_DRAM_1                     0x80000000      /* DRAM Bank #1 */
  65
  66 #define CONFIG_SYS_SDRAM_BASE           PHYS_DRAM_1
  67 #define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
  68                                                 GENERATED_GBL_DATA_SIZE)
  69  /* Platform/Board specific defs */
  70 #define CONFIG_SYS_TIMERBASE            0x48040000      /* Use Timer2 */
  71 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
  72
  73 /* NS16550 Configuration */
  74 #ifdef CONFIG_SPL_BUILD
  75 #define CONFIG_SYS_NS16550_SERIAL
  76 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  77 #endif
  78 #define CONFIG_SYS_NS16550_CLK          (48000000)
  79 #define CONFIG_SYS_NS16550_COM1         0x44e09000
  80 #define CONFIG_SYS_NS16550_COM4         0x481a6000
  81
  82
  83 /* I2C Configuration */
  84 #define CONFIG_I2C
  85 #define CONFIG_SYS_I2C
  86
  87 /* Defines for SPL */
  88 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - \
  89                                          CONFIG_SPL_TEXT_BASE)
  90
  91 #define CONFIG_SPL_BSS_START_ADDR       0x80000000
  92 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000         /* 512 KB */
  93
  94 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
  95 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
  96
  97 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x20000
  98
  99 #define CONFIG_SPL_NAND_BASE
 100 #define CONFIG_SPL_NAND_DRIVERS
 101 #define CONFIG_SPL_NAND_ECC
 102 #define CONFIG_SYS_NAND_ONFI_DETECTION
 103 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 104 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
 105                                          CONFIG_SYS_NAND_PAGE_SIZE)
 106 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 107 #define CONFIG_SYS_NAND_OOBSIZE         64
 108 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 109 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 110 #define CONFIG_SYS_NAND_ECCPOS          { 2, 3, 4, 5, 6, 7, 8, 9, \
 111                                          10, 11, 12, 13, 14, 15, 16, 17, \
 112                                          18, 19, 20, 21, 22, 23, 24, 25, \
 113                                          26, 27, 28, 29, 30, 31, 32, 33, \
 114                                          34, 35, 36, 37, 38, 39, 40, 41, \
 115                                          42, 43, 44, 45, 46, 47, 48, 49, \
 116                                          50, 51, 52, 53, 54, 55, 56, 57, }
 117
 118 #define CONFIG_SYS_NAND_ECCSIZE         512
 119 #define CONFIG_SYS_NAND_ECCBYTES        14
 120 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW
 121
 122 #define CONFIG_SYS_NAND_ECCSTEPS        4
 123 #define CONFIG_SYS_NAND_ECCTOTAL        (CONFIG_SYS_NAND_ECCBYTES * \
 124                                                 CONFIG_SYS_NAND_ECCSTEPS)
 125
 126 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 127
 128 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 129
 130 /*
 131  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
 132  * 64 bytes before this address should be set aside for u-boot.img's
 133  * header. That is 0x800FFFC0--0x80100000 should not be used for any
 134  * other needs.
 135  */
 136 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
 137 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 138
 139 /*
 140  * Since SPL did pll and ddr initialization for us,
 141  * we don't need to do it twice.
 142  */
 143 #ifndef CONFIG_SPL_BUILD
 144 #define CONFIG_SKIP_LOWLEVEL_INIT
 145 #endif
 146
 147 #ifndef CONFIG_SPL_BUILD
 148 /*
 149  * USB configuration
 150  */
 151 #define CONFIG_AM335X_USB0
 152 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
 153 #define CONFIG_AM335X_USB1
 154 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
 155
 156 /* USB DRACO ID as default */
 157 #define CONFIG_USBD_HS
 158
 159 /* USB Device Firmware Update support */
 160 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    (1 << 20)
 161 #define DFU_MANIFEST_POLL_TIMEOUT       25000
 162
 163 #endif /* CONFIG_SPL_BUILD */
 164
 165 /*
 166  * Default to using SPI for environment, etc.  We have multiple copies
 167  * of SPL as the ROM will check these locations.
 168  * 0x0 - 0x20000 : First copy of SPL
 169  * 0x20000 - 0x40000 : Second copy of SPL
 170  * 0x40000 - 0x60000 : Third copy of SPL
 171  * 0x60000 - 0x80000 : Fourth copy of SPL
 172  * 0x80000 - 0xDF000 : U-Boot
 173  * 0xDF000 - 0xE0000 : U-Boot Environment
 174  * 0xE0000 - 0x442000 : Linux Kernel
 175  * 0x442000 - 0x800000 : Userland
 176  */
 177 #if defined(CONFIG_SPI_BOOT)
 178 # define CONFIG_ENV_OFFSET              (892 << 10) /* 892 KiB in */
 179 # define CONFIG_ENV_SECT_SIZE           (4 << 10) /* 4 KB sectors */
 180 #endif /* SPI support */
 181
 182 #define CONFIG_BOOTP_DEFAULT
 183 #define CONFIG_BOOTP_DNS2
 184 #define CONFIG_BOOTP_SEND_HOSTNAME
 185 #define CONFIG_NET_RETRY_COUNT         10
 186
 187 /* NAND support */
 188 #ifdef CONFIG_NAND
 189 /* UBI Support */
 190
 191 /* Commen environment */
 192 #define COMMON_ENV_DFU_ARGS     "dfu_args=run bootargs_defaults;" \
 193                                 "setenv bootargs ${bootargs};" \
 194                                 "mtdparts default;" \
 195                                 "draco_led 1;" \
 196                                 "dfu 0 nand 0;" \
 197                                 "draco_led 0;\0" \
 198
 199 #define COMMON_ENV_NAND_BOOT \
 200                 "nand_boot=echo Booting from nand; " \
 201                 "if test ${upgrade_available} -eq 1; then " \
 202                         "if test ${bootcount} -gt ${bootlimit}; " \
 203                                 "then " \
 204                                 "setenv upgrade_available 0;" \
 205                                 "setenv ${partitionset_active} true;" \
 206                                 "if test -n ${A}; then " \
 207                                         "setenv partitionset_active B; " \
 208                                         "env delete A; " \
 209                                 "fi;" \
 210                                 "if test -n ${B}; then " \
 211                                         "setenv partitionset_active A; " \
 212                                         "env delete B; " \
 213                                 "fi;" \
 214                                 "saveenv; " \
 215                         "fi;" \
 216                 "fi;" \
 217                 "echo set ${partitionset_active}...;" \
 218                 "run nand_args; "
 219
 220 #define COMMON_ENV_NAND_CMDS    "flash_self=run nand_boot\0" \
 221                                 "flash_self_test=setenv testargs test; " \
 222                                         "run nand_boot\0" \
 223                                 "dfu_start=echo Preparing for dfu mode ...; " \
 224                                 "run dfu_args; \0"
 225
 226 #define COMMON_ENV_SETTINGS \
 227         "verify=no \0" \
 228         "project_dir=targetdir\0" \
 229         "upgrade_available=0\0" \
 230         "altbootcmd=run bootcmd\0" \
 231         "partitionset_active=A\0" \
 232         "loadaddr=0x82000000\0" \
 233         "kloadaddr=0x81000000\0" \
 234         "script_addr=0x81900000\0" \
 235         "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \
 236         "nfsopts=nolock rw\0" \
 237         "ip_method=none\0" \
 238         "bootenv=uEnv.txt\0" \
 239         "bootargs_defaults=setenv bootargs " \
 240                 "console=${console} " \
 241                 "${testargs} " \
 242                 "${optargs}\0" \
 243         "siemens_help=echo; "\
 244                 "echo Type 'run flash_self' to use kernel and root " \
 245                 "filesystem on memory; echo Type 'run flash_self_test' to " \
 246                 "use kernel and root filesystem on memory, boot in test " \
 247                 "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \
 248                 "from memory and root filesystem over NFS; echo Type " \
 249                 "'run net_nfs' to get Kernel over TFTP and mount root " \
 250                 "filesystem over NFS; " \
 251                 "echo Set partitionset_active variable to 'A' " \
 252                 "or 'B' to select kernel and rootfs partition; " \
 253                 "echo" \
 254                 "\0"
 255
 256 /*
 257  * Variant 1 partition layout
 258  * chip-size = 256MiB
 259  *|         name |        size |           address area |
 260  *-------------------------------------------------------
 261  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
 262  *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
 263  *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
 264  *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
 265  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
 266  *|    uboot.env | 128.000 KiB | 0x  260000..0x  27ffff |
 267  *|     kernel_a |   5.000 MiB | 0x  280000..0x  77ffff |
 268  *|     kernel_b |   5.000 MiB | 0x  780000..0x  c7ffff |
 269  *|      mtdoops |   8.000 MiB | 0x  c80000..0x 147ffff |
 270  *|       rootfs | 235.500 MiB | 0x 1480000..0x fffffff |
 271  *-------------------------------------------------------
 272
 273                                         "mtdparts=omap2-nand.0:" \
 274                                         "128k(spl),"            \
 275                                         "128k(spl.backup1),"    \
 276                                         "128k(spl.backup2),"    \
 277                                         "128k(spl.backup3),"    \
 278                                         "1920k(u-boot),"        \
 279                                         "128k(uboot.env),"      \
 280                                         "5120k(kernel_a),"      \
 281                                         "5120k(kernel_b),"      \
 282                                         "8192k(mtdoops),"       \
 283                                         "-(rootfs)"
 284  */
 285
 286 #define DFU_ALT_INFO_NAND_V1 \
 287         "spl part 0 1;" \
 288         "spl.backup1 part 0 2;" \
 289         "spl.backup2 part 0 3;" \
 290         "spl.backup3 part 0 4;" \
 291         "u-boot part 0 5;" \
 292         "u-boot.env part 0 6;" \
 293         "kernel_a part 0 7;" \
 294         "kernel_b part 0 8;" \
 295         "rootfs partubi 0 10"
 296
 297 #define CONFIG_ENV_SETTINGS_NAND_V1 \
 298         "nand_active_ubi_vol=rootfs_a\0" \
 299         "nand_active_ubi_vol_A=rootfs_a\0" \
 300         "nand_active_ubi_vol_B=rootfs_b\0" \
 301         "nand_root_fs_type=ubifs rootwait=1\0" \
 302         "nand_src_addr=0x280000\0" \
 303         "nand_src_addr_A=0x280000\0" \
 304         "nand_src_addr_B=0x780000\0" \
 305         "nand_args=run bootargs_defaults;" \
 306                 "mtdparts default;" \
 307                 "setenv ${partitionset_active} true;" \
 308                 "if test -n ${A}; then " \
 309                         "setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \
 310                         "setenv nand_src_addr ${nand_src_addr_A};" \
 311                 "fi;" \
 312                 "if test -n ${B}; then " \
 313                         "setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \
 314                         "setenv nand_src_addr ${nand_src_addr_B};" \
 315                 "fi;" \
 316                 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
 317                 "ubi.mtd=9,${ubi_off};" \
 318                 "setenv bootargs ${bootargs} " \
 319                 "root=${nand_root} noinitrd ${mtdparts} " \
 320                 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
 321                 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
 322                 "=mtdoops\0" \
 323         COMMON_ENV_DFU_ARGS \
 324                 "dfu_alt_info=" DFU_ALT_INFO_NAND_V1 "\0" \
 325         COMMON_ENV_NAND_BOOT \
 326                 "nand read.i ${kloadaddr} ${nand_src_addr} " \
 327                 "${nand_img_size}; bootm ${kloadaddr}\0" \
 328         COMMON_ENV_NAND_CMDS
 329
 330 #define CONFIG_ENV_SETTINGS_V1 \
 331                 COMMON_ENV_SETTINGS \
 332         "net_args=run bootargs_defaults;" \
 333                 "mtdparts default;" \
 334                 "setenv bootfile ${project_dir}/kernel/uImage;" \
 335                 "setenv rootpath /home/projects/${project_dir}/rootfs;" \
 336                 "setenv bootargs ${bootargs} " \
 337                 "root=/dev/nfs ${mtdparts} " \
 338                 "nfsroot=${serverip}:${rootpath},${nfsopts} " \
 339                 "ip=${ipaddr}:${serverip}:" \
 340                 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
 341         "net_nfs=echo Booting from network ...; " \
 342                 "run net_args; " \
 343                 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
 344                 "bootm ${kloadaddr}\0"
 345
 346 /*
 347  * Variant 2 partition layout (default)
 348  * chip-size = 256MiB or 512 MiB
 349  *|         name |        size |           address area |
 350  *-------------------------------------------------------
 351  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
 352  *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
 353  *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
 354  *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
 355  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
 356  *|   uboot.env0 | 512.000 KiB | 0x  260000..0x  2Dffff |
 357  *|   uboot.env1 | 512.000 KiB | 0x  2E0000..0x  35ffff |
 358  *|      mtdoops | 512.000 KiB | 0x  360000..0x  3dffff |
 359  *| (256) rootfs | 252.125 MiB | 0x  3E0000..0x fffffff |
 360  *| (512) rootfs | 508.125 MiB | 0x  3E0000..0x1fffffff |
 361  *-------------------------------------------------------
 362  */
 363
 364 #define DFU_ALT_INFO_NAND_V2 \
 365         "spl part 0 1;" \
 366         "spl.backup1 part 0 2;" \
 367         "spl.backup2 part 0 3;" \
 368         "spl.backup3 part 0 4;" \
 369         "u-boot part 0 5;" \
 370         "u-boot.env0 part 0 6;" \
 371         "u-boot.env1 part 0 7;" \
 372         "rootfs partubi 0 9" \
 373
 374 #define CONFIG_ENV_SETTINGS_NAND_V2 \
 375         "nand_active_ubi_vol=rootfs_a\0" \
 376         "rootfs_name=rootfs\0" \
 377         "kernel_name=uImage\0"\
 378         "nand_root_fs_type=ubifs rootwait=1\0" \
 379         "nand_args=run bootargs_defaults;" \
 380                 "mtdparts default;" \
 381                 "setenv ${partitionset_active} true;" \
 382                 "if test -n ${A}; then " \
 383                         "setenv nand_active_ubi_vol ${rootfs_name}_a;" \
 384                 "fi;" \
 385                 "if test -n ${B}; then " \
 386                         "setenv nand_active_ubi_vol ${rootfs_name}_b;" \
 387                 "fi;" \
 388                 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
 389                 "ubi.mtd=rootfs,2048;" \
 390                 "setenv bootargs ${bootargs} " \
 391                 "root=${nand_root} noinitrd ${mtdparts} " \
 392                 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
 393                 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
 394                 "=mtdoops\0" \
 395         COMMON_ENV_DFU_ARGS \
 396                 "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \
 397         COMMON_ENV_NAND_BOOT \
 398                 "ubi part rootfs ${ubi_off};" \
 399                 "ubifsmount ubi0:${nand_active_ubi_vol};" \
 400                 "ubifsload ${kloadaddr} boot/${kernel_name};" \
 401                 "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \
 402                 "bootm ${kloadaddr} - ${loadaddr}\0" \
 403         "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \
 404                 "bootm ${kloadaddr} - ${loadaddr}\0" \
 405         COMMON_ENV_NAND_CMDS
 406
 407 #define CONFIG_ENV_SETTINGS_V2 \
 408                 COMMON_ENV_SETTINGS \
 409         "net_args=run bootargs_defaults;" \
 410                 "mtdparts default;" \
 411                 "setenv bootfile ${project_dir}/kernel/uImage;" \
 412                 "setenv bootdtb ${project_dir}/kernel/dtb;" \
 413                 "setenv rootpath /home/projects/${project_dir}/rootfs;" \
 414                 "setenv bootargs ${bootargs} " \
 415                 "root=/dev/nfs ${mtdparts} " \
 416                 "nfsroot=${serverip}:${rootpath},${nfsopts} " \
 417                 "ip=${ipaddr}:${serverip}:" \
 418                 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
 419         "net_nfs=echo Booting from network ...; " \
 420                 "run net_args; " \
 421                 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
 422                 "tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \
 423                 "bootm ${kloadaddr} - ${loadaddr}\0"
 424
 425 /*
 426  * Variant 3 partition layout
 427  * chip-size = 512MiB
 428  *|         name |        size |           address area |
 429  *-------------------------------------------------------
 430  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
 431  *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
 432  *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
 433  *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
 434  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
 435  *|   uboot.env0 | 512.000 KiB | 0x  260000..0x  2Dffff |
 436  *|   uboot.env1 | 512.000 KiB | 0x  2E0000..0x  35ffff |
 437  *|       rootfs | 300.000 MiB | 0x  360000..0x12f5ffff |
 438  *|      mtdoops | 512.000 KiB | 0x12f60000..0x12fdffff |
 439  *|configuration | 104.125 MiB | 0x12fe0000..0x1fffffff |
 440  *-------------------------------------------------------
 441
 442                                         "mtdparts=omap2-nand.0:" \
 443                                         "128k(spl),"            \
 444                                         "128k(spl.backup1),"    \
 445                                         "128k(spl.backup2),"    \
 446                                         "128k(spl.backup3),"    \
 447                                         "1920k(u-boot),"        \
 448                                         "512k(u-boot.env0),"    \
 449                                         "512k(u-boot.env1),"    \
 450                                         "300m(rootfs),"         \
 451                                         "512k(mtdoops),"        \
 452                                         "-(configuration)"
 453
 454  */
 455
 456 #define CONFIG_SYS_NAND_BASE            (0x08000000)    /* physical address */
 457                                                         /* to access nand at */
 458                                                         /* CS0 */
 459 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of NAND
 460                                                            devices */
 461 #if !defined(CONFIG_SPI_BOOT)
 462 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 463 #endif
 464 #endif
 465
 466 /* Reboot after 60 sec if bootcmd fails */
 467 #define CONFIG_RESET_TO_RETRY
 468 #define CONFIG_BOOT_RETRY_TIME 60
 469
 470 #endif  /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */