include/configs/smmaco4.h

   1 /*
   2  * (C) Copyright 2003-2006
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * (C) Copyright 2004-2005
   6  * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
   7  *
   8  * See file CREDITS for list of people who contributed to this
   9  * project.
  10  *
  11  * This program is free software; you can redistribute it and/or
  12  * modify it under the terms of the GNU General Public License as
  13  * published by the Free Software Foundation; either version 2 of
  14  * the License, or (at your option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  * GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  24  * MA 02111-1307 USA
  25  */
  26
  27 #ifndef __CONFIG_H
  28 #define __CONFIG_H
  29
  30 /*
  31  * High Level Configuration Options
  32  * (easy to change)
  33  */
  34
  35 #define CONFIG_MPC5xxx          1       /* This is an MPC5xxx CPU */
  36 #define CONFIG_MPC5200          1       /* (more precisely an MPC5200 CPU) */
  37 #define CONFIG_TQM5200          1       /* ... on TQM5200 module */
  38 #undef CONFIG_TQM5200_REV100            /*  define for revision 100 modules */
  39
  40 #define CONFIG_SYS_MPC5XXX_CLKIN        33000000 /* ... running at 33.000000MHz */
  41
  42 #define BOOTFLAG_COLD           0x01    /* Normal Power-On: Boot from FLASH  */
  43 #define BOOTFLAG_WARM           0x02    /* Software reboot           */
  44
  45 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
  46
  47 /*
  48  * Serial console configuration
  49  */
  50 #define CONFIG_PSC_CONSOLE      1       /* console is on PSC1 */
  51 #define CONFIG_BAUDRATE         115200  /* ... at 115200 bps */
  52 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200, 230400 }
  53
  54 /* Partitions */
  55 #define CONFIG_MAC_PARTITION
  56 #define CONFIG_DOS_PARTITION
  57 #define CONFIG_ISO_PARTITION
  58
  59 /* POST support */
  60 #define CONFIG_POST             (CONFIG_SYS_POST_MEMORY   | \
  61                                  CONFIG_SYS_POST_CPU       | \
  62                                  CONFIG_SYS_POST_I2C)
  63
  64 #ifdef CONFIG_POST
  65 /* preserve space for the post_word at end of on-chip SRAM */
  66 #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
  67 #endif
  68
  69
  70 /*
  71  * BOOTP options
  72  */
  73 #define CONFIG_BOOTP_BOOTFILESIZE
  74 #define CONFIG_BOOTP_BOOTPATH
  75 #define CONFIG_BOOTP_GATEWAY
  76 #define CONFIG_BOOTP_HOSTNAME
  77
  78
  79 /*
  80  * Command line configuration.
  81  */
  82 #include <config_cmd_default.h>
  83 #define CONFIG_CMD_ASKENV
  84 #define CONFIG_CMD_DATE
  85 #define CONFIG_CMD_DHCP
  86 #define CONFIG_CMD_ECHO
  87 #define CONFIG_CMD_EEPROM
  88 #define CONFIG_CMD_I2C
  89 #define CONFIG_CMD_JFFS2
  90 #define CONFIG_CMD_MII
  91 #define CONFIG_CMD_NFS
  92 #define CONFIG_CMD_PING
  93 #define CONFIG_CMD_REGINFO
  94 #define CONFIG_CMD_SNTP
  95
  96 #ifdef CONFIG_POST
  97 #define CONFIG_CMD_DIAG
  98 #endif
  99
 100
 101 #define CONFIG_TIMESTAMP                /* display image timestamps */
 102
 103 #if (TEXT_BASE == 0xFC000000)           /* Boot low */
 104 #   define CONFIG_SYS_LOWBOOT           1
 105 #endif
 106
 107 /*
 108  * Autobooting
 109  */
 110 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds */
 111
 112 #define CONFIG_PREBOOT  "echo;" \
 113         "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 114         "echo"
 115
 116 #undef  CONFIG_BOOTARGS
 117
 118 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 119         "netdev=eth0\0"                                                 \
 120         "rootpath=/opt/eldk/ppc_6xx\0"                                  \
 121         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 122         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 123                 "nfsroot=${serverip}:${rootpath}\0"                     \
 124         "addip=setenv bootargs ${bootargs} "                            \
 125                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 126                 ":${hostname}:${netdev}:off panic=1\0"                  \
 127         "flash_self=run ramargs addip;"                                 \
 128                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 129         "flash_nfs=run nfsargs addip;"                                  \
 130                 "bootm ${kernel_addr}\0"                                \
 131         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"     \
 132         "bootfile=/tftpboot/smmaco4/uImage\0"                           \
 133         "load=tftp 200000 ${u-boot}\0"                                  \
 134         "u-boot=/tftpboot/smmaco4/u-boot.bin\0"                         \
 135         "update=protect off FC000000 FC05FFFF;"                         \
 136                 "erase FC000000 FC05FFFF;"                              \
 137                 "cp.b 200000 FC000000 ${filesize};"                     \
 138                 "protect on FC000000 FC05FFFF\0"                        \
 139         ""
 140
 141 #define CONFIG_BOOTCOMMAND      "run net_nfs"
 142
 143 /*
 144  * IPB Bus clocking configuration.
 145  */
 146 #define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK         /* define for 133MHz speed */
 147
 148 #if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
 149 /*
 150  * PCI Bus clocking configuration
 151  *
 152  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
 153  * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
 154  * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
 155  */
 156 #define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2    /* define for 66MHz speed */
 157 #endif
 158
 159 /*
 160  * I2C configuration
 161  */
 162 #define CONFIG_HARD_I2C         1       /* I2C with hardware support */
 163 #ifdef CONFIG_TQM5200_REV100
 164 #define CONFIG_SYS_I2C_MODULE           1       /* Select I2C module #1 for rev. 100 board */
 165 #else
 166 #define CONFIG_SYS_I2C_MODULE           2       /* Select I2C module #2 for all other revs */
 167 #endif
 168
 169 /*
 170  * I2C clock frequency
 171  *
 172  * Please notice, that the resulting clock frequency could differ from the
 173  * configured value. This is because the I2C clock is derived from system
 174  * clock over a frequency divider with only a few divider values. U-boot
 175  * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated
 176  * approximation allways lies below the configured value, never above.
 177  */
 178 #define CONFIG_SYS_I2C_SPEED            100000 /* 100 kHz */
 179 #define CONFIG_SYS_I2C_SLAVE            0x7F
 180
 181 /*
 182  * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work
 183  * also). For other EEPROMs configuration should be verified. On Mini-FAP the
 184  * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the
 185  * same configuration could be used.
 186  */
 187 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50    /* 1010000x */
 188 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
 189 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       5       /* =32 Bytes per write */
 190 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   20
 191
 192 /*
 193  * Flash configuration
 194  */
 195 #define CONFIG_SYS_FLASH_BASE           TEXT_BASE /* 0xFC000000 */
 196
 197 /* use CFI flash driver if no module variant is spezified */
 198 #define CONFIG_SYS_FLASH_CFI            1       /* Flash is CFI conformant */
 199 #define CONFIG_FLASH_CFI_DRIVER 1       /* Use the common driver */
 200 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_BOOTCS_START }
 201 #define CONFIG_SYS_FLASH_EMPTY_INFO
 202 #define CONFIG_SYS_FLASH_SIZE           0x04000000 /* 64 MByte */
 203 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* max num of sects on one chip */
 204 #undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE        /* not supported yet for AMD */
 205
 206 #if !defined(CONFIG_SYS_LOWBOOT)
 207 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + 0x00760000 + 0x00800000)
 208 #else   /* CONFIG_SYS_LOWBOOT */
 209 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + 0x00060000)
 210 #endif  /* CONFIG_SYS_LOWBOOT */
 211 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max num of flash banks
 212                                            (= chip selects) */
 213 #define CONFIG_SYS_FLASH_ERASE_TOUT     240000  /* Flash Erase Timeout (in ms)  */
 214 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (in ms)  */
 215
 216 /* Dynamic MTD partition support */
 217 #define CONFIG_CMD_MTDPARTS
 218 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 219 #define CONFIG_FLASH_CFI_MTD
 220 #define MTDIDS_DEFAULT          "nor0=TQM5200-0"
 221 #define MTDPARTS_DEFAULT        "mtdparts=TQM5200-0:640k(firmware),"    \
 222                                                 "1408k(kernel),"        \
 223                                                 "2m(initrd),"           \
 224                                                 "4m(small-fs),"         \
 225                                                 "16m(big-fs),"          \
 226                                                 "8m(misc)"
 227
 228 /*
 229  * Environment settings
 230  */
 231 #define CONFIG_ENV_IS_IN_FLASH  1
 232 #define CONFIG_ENV_SIZE         0x10000
 233 #define CONFIG_ENV_SECT_SIZE    0x20000
 234 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 235 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 236
 237 /*
 238  * Memory map
 239  */
 240 #define CONFIG_SYS_MBAR         0xF0000000
 241 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 242 #define CONFIG_SYS_DEFAULT_MBAR 0x80000000
 243
 244 /* Use ON-Chip SRAM until RAM will be available */
 245 #define CONFIG_SYS_INIT_RAM_ADDR        MPC5XXX_SRAM
 246 #ifdef CONFIG_POST
 247 /* preserve space for the post_word at end of on-chip SRAM */
 248 #define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE
 249 #else
 250 #define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE
 251 #endif
 252
 253
 254 #define CONFIG_SYS_GBL_DATA_SIZE        128     /* size in bytes reserved for initial data */
 255 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 256 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 257
 258 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE
 259 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 260 #   define CONFIG_SYS_RAMBOOT           1
 261 #endif
 262
 263 #define CONFIG_SYS_MONITOR_LEN          (384 << 10)     /* Reserve 384 kB for Monitor   */
 264 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)     /* Reserve 256 kB for malloc()  */
 265 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 266
 267 /*
 268  * Ethernet configuration
 269  */
 270 #define CONFIG_MPC5xxx_FEC      1
 271 /*
 272  * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
 273  */
 274 /* #define CONFIG_FEC_10MBIT 1 */
 275 #define CONFIG_PHY_ADDR         0x00
 276
 277 /*
 278  * GPIO configuration
 279  *
 280  * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1):
 281  *      Bit 0 (mask: 0x80000000): 1
 282  * use ALT CAN position: Bits 2-3 (mask: 0x30000000):
 283  *      00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
 284  *      01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
 285  *            Use for REV200 STK52XX boards. Do not use with REV100 modules
 286  *            (because, there I2C1 is used as I2C bus)
 287  * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
 288  * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030)
 289  *      000 -> All PSC2 pins are GIOPs
 290  *      001 -> CAN1/2 on PSC2 pins
 291  *             Use for REV100 STK52xx boards
 292  * use PSC6:
 293  *   on STK52xx:
 294  *      use as UART. Pins PSC6_0 to PSC6_3 are used.
 295  *      Bits 9:11 (mask: 0x00700000):
 296  *         101 -> PSC6 : Extended POST test is not available
 297  *   on MINI-FAP and TQM5200_IB:
 298  *      use PSC6_0 to PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000):
 299  *         000 -> PSC6 could not be used as UART, CODEC or IrDA
 300  *   GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST
 301  *   tests.
 302  */
 303 #if defined (CONFIG_MINIFAP)
 304 # define CONFIG_SYS_GPS_PORT_CONFIG     0x91000004
 305 #elif defined (CONFIG_STK52XX)
 306 # if defined (CONFIG_STK52XX_REV100)
 307 #  define CONFIG_SYS_GPS_PORT_CONFIG    0x81500014
 308 # else /* STK52xx REV200 and above */
 309 #  if defined (CONFIG_TQM5200_REV100)
 310 #   error TQM5200 REV100 not supported on STK52XX REV200 or above
 311 #  else/* TQM5200 REV200 and above */
 312 #   define CONFIG_SYS_GPS_PORT_CONFIG   0x91500004
 313 #  endif
 314 # endif
 315 #else  /* TMQ5200 Inbetriebnahme-Board */
 316 # define CONFIG_SYS_GPS_PORT_CONFIG     0x81000004
 317 #endif
 318
 319 /*
 320  * RTC configuration
 321  */
 322 #define CONFIG_RTC_MPC5200      1       /* use internal MPC5200 RTC */
 323
 324 /*
 325  * Miscellaneous configurable options
 326  */
 327 #define CONFIG_SYS_LONGHELP                     /* undef to save memory     */
 328 #define CONFIG_SYS_PROMPT               "=> "   /* Monitor Command Prompt   */
 329 #if defined(CONFIG_CMD_KGDB)
 330 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size  */
 331 #else
 332 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size  */
 333 #endif
 334 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 335 #define CONFIG_SYS_MAXARGS              16      /* max number of command args   */
 336 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 337
 338 /* Enable an alternate, more extensive memory test */
 339 #define CONFIG_SYS_ALT_MEMTEST
 340
 341 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
 342 #define CONFIG_SYS_MEMTEST_END          0x00f00000      /* 1 ... 15 MB in DRAM  */
 343
 344 #define CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
 345
 346 #define CONFIG_SYS_HZ                   1000    /* decrementer freq: 1 ms ticks */
 347
 348 #define CONFIG_SYS_CACHELINE_SIZE       32      /* For MPC5xxx CPUs */
 349 #if defined(CONFIG_CMD_KGDB)
 350 #  define CONFIG_SYS_CACHELINE_SHIFT    5       /* log base 2 of the above value */
 351 #endif
 352
 353 /*
 354  * Enable loopw command.
 355  */
 356 #define CONFIG_LOOPW
 357
 358 /*
 359  * Various low-level settings
 360  */
 361 #if defined(CONFIG_MPC5200)
 362 #define CONFIG_SYS_HID0_INIT            HID0_ICE | HID0_ICFI
 363 #define CONFIG_SYS_HID0_FINAL           HID0_ICE
 364 #else
 365 #define CONFIG_SYS_HID0_INIT            0
 366 #define CONFIG_SYS_HID0_FINAL           0
 367 #endif
 368
 369 #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
 370 #define CONFIG_SYS_BOOTCS_SIZE          CONFIG_SYS_FLASH_SIZE
 371 #ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
 372 #define CONFIG_SYS_BOOTCS_CFG           0x0008DF30 /* for pci_clk  = 66 MHz */
 373 #else
 374 #define CONFIG_SYS_BOOTCS_CFG           0x0004DF30 /* for pci_clk = 33 MHz */
 375 #endif
 376 #define CONFIG_SYS_CS0_START            CONFIG_SYS_FLASH_BASE
 377 #define CONFIG_SYS_CS0_SIZE             CONFIG_SYS_FLASH_SIZE
 378
 379 #define CONFIG_SYS_CS_BURST             0x00000000
 380 #define CONFIG_SYS_CS_DEADCYCLE 0x33333311      /* 1 dead cycle for flash and SM501 */
 381
 382 #define CONFIG_SYS_RESET_ADDRESS        0xff000000
 383
 384 #endif /* __CONFIG_H */