include/configs/smmaco4.h

   1 /*
   2  * (C) Copyright 2003-2006
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * (C) Copyright 2004-2005
   6  * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
   7  *
   8  * See file CREDITS for list of people who contributed to this
   9  * project.
  10  *
  11  * This program is free software; you can redistribute it and/or
  12  * modify it under the terms of the GNU General Public License as
  13  * published by the Free Software Foundation; either version 2 of
  14  * the License, or (at your option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  * GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  24  * MA 02111-1307 USA
  25  */
  26
  27 #ifndef __CONFIG_H
  28 #define __CONFIG_H
  29
  30 /*
  31  * High Level Configuration Options
  32  * (easy to change)
  33  */
  34
  35 #define CONFIG_MPC5xxx          1       /* This is an MPC5xxx CPU */
  36 #define CONFIG_MPC5200          1       /* (more precisely an MPC5200 CPU) */
  37 #define CONFIG_TQM5200          1       /* ... on TQM5200 module */
  38 #undef CONFIG_TQM5200_REV100            /*  define for revision 100 modules */
  39
  40 #define CFG_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz */
  41
  42 #define BOOTFLAG_COLD           0x01    /* Normal Power-On: Boot from FLASH  */
  43 #define BOOTFLAG_WARM           0x02    /* Software reboot           */
  44
  45 /*
  46  * Serial console configuration
  47  */
  48 #define CONFIG_PSC_CONSOLE      1       /* console is on PSC1 */
  49 #define CONFIG_BAUDRATE         115200  /* ... at 115200 bps */
  50 #define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, 230400 }
  51
  52 /* Partitions */
  53 #define CONFIG_MAC_PARTITION
  54 #define CONFIG_DOS_PARTITION
  55 #define CONFIG_ISO_PARTITION
  56
  57 /* POST support */
  58 #define CONFIG_POST             (CFG_POST_MEMORY   | \
  59                                  CFG_POST_CPU      | \
  60                                  CFG_POST_I2C)
  61
  62 #ifdef CONFIG_POST
  63 /* preserve space for the post_word at end of on-chip SRAM */
  64 #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
  65 #endif
  66
  67
  68 /*
  69  * BOOTP options
  70  */
  71 #define CONFIG_BOOTP_BOOTFILESIZE
  72 #define CONFIG_BOOTP_BOOTPATH
  73 #define CONFIG_BOOTP_GATEWAY
  74 #define CONFIG_BOOTP_HOSTNAME
  75
  76
  77 /*
  78  * Command line configuration.
  79  */
  80 #include <config_cmd_default.h>
  81 #define CONFIG_CMD_ASKENV
  82 #define CONFIG_CMD_DATE
  83 #define CONFIG_CMD_DHCP
  84 #define CONFIG_CMD_ECHO
  85 #define CONFIG_CMD_EEPROM
  86 #define CONFIG_CMD_I2C
  87 #define CONFIG_CMD_JFFS2
  88 #define CONFIG_CMD_MII
  89 #define CONFIG_CMD_NFS
  90 #define CONFIG_CMD_PING
  91 #define CONFIG_CMD_REGINFO
  92 #define CONFIG_CMD_SNTP
  93
  94 #ifdef CONFIG_POST
  95 #define CONFIG_CMD_DIAG
  96 #endif
  97
  98
  99 #define CONFIG_TIMESTAMP                /* display image timestamps */
 100
 101 #if (TEXT_BASE == 0xFC000000)           /* Boot low */
 102 #   define CFG_LOWBOOT          1
 103 #endif
 104
 105 /*
 106  * Autobooting
 107  */
 108 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds */
 109
 110 #define CONFIG_PREBOOT  "echo;" \
 111         "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 112         "echo"
 113
 114 #undef  CONFIG_BOOTARGS
 115
 116 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 117         "netdev=eth0\0"                                                 \
 118         "rootpath=/opt/eldk/ppc_6xx\0"                                  \
 119         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 120         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 121                 "nfsroot=${serverip}:${rootpath}\0"                     \
 122         "addip=setenv bootargs ${bootargs} "                            \
 123                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 124                 ":${hostname}:${netdev}:off panic=1\0"                  \
 125         "flash_self=run ramargs addip;"                                 \
 126                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 127         "flash_nfs=run nfsargs addip;"                                  \
 128                 "bootm ${kernel_addr}\0"                                \
 129         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"     \
 130         "bootfile=/tftpboot/smmaco4/uImage\0"                           \
 131         "load=tftp 200000 ${u-boot}\0"                                  \
 132         "u-boot=/tftpboot/smmaco4/u-boot.bin\0"                         \
 133         "update=protect off FC000000 FC05FFFF;"                         \
 134                 "erase FC000000 FC05FFFF;"                              \
 135                 "cp.b 200000 FC000000 ${filesize};"                     \
 136                 "protect on FC000000 FC05FFFF\0"                        \
 137         ""
 138
 139 #define CONFIG_BOOTCOMMAND      "run net_nfs"
 140
 141 /*
 142  * IPB Bus clocking configuration.
 143  */
 144 #define CFG_IPBCLK_EQUALS_XLBCLK                /* define for 133MHz speed */
 145
 146 #if defined(CFG_IPBCLK_EQUALS_XLBCLK)
 147 /*
 148  * PCI Bus clocking configuration
 149  *
 150  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
 151  * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
 152  * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
 153  */
 154 #define CFG_PCICLK_EQUALS_IPBCLK_DIV2   /* define for 66MHz speed */
 155 #endif
 156
 157 /*
 158  * I2C configuration
 159  */
 160 #define CONFIG_HARD_I2C         1       /* I2C with hardware support */
 161 #ifdef CONFIG_TQM5200_REV100
 162 #define CFG_I2C_MODULE          1       /* Select I2C module #1 for rev. 100 board */
 163 #else
 164 #define CFG_I2C_MODULE          2       /* Select I2C module #2 for all other revs */
 165 #endif
 166
 167 /*
 168  * I2C clock frequency
 169  *
 170  * Please notice, that the resulting clock frequency could differ from the
 171  * configured value. This is because the I2C clock is derived from system
 172  * clock over a frequency divider with only a few divider values. U-boot
 173  * calculates the best approximation for CFG_I2C_SPEED. However the calculated
 174  * approximation allways lies below the configured value, never above.
 175  */
 176 #define CFG_I2C_SPEED           100000 /* 100 kHz */
 177 #define CFG_I2C_SLAVE           0x7F
 178
 179 /*
 180  * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work
 181  * also). For other EEPROMs configuration should be verified. On Mini-FAP the
 182  * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the
 183  * same configuration could be used.
 184  */
 185 #define CFG_I2C_EEPROM_ADDR             0x50    /* 1010000x */
 186 #define CFG_I2C_EEPROM_ADDR_LEN         2
 187 #define CFG_EEPROM_PAGE_WRITE_BITS      5       /* =32 Bytes per write */
 188 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS  20
 189
 190 /*
 191  * Flash configuration
 192  */
 193 #define CFG_FLASH_BASE          TEXT_BASE /* 0xFC000000 */
 194
 195 /* use CFI flash driver if no module variant is spezified */
 196 #define CFG_FLASH_CFI           1       /* Flash is CFI conformant */
 197 #define CFG_FLASH_CFI_DRIVER    1       /* Use the common driver */
 198 #define CFG_FLASH_BANKS_LIST    { CFG_BOOTCS_START }
 199 #define CFG_FLASH_EMPTY_INFO
 200 #define CFG_FLASH_SIZE          0x04000000 /* 64 MByte */
 201 #define CFG_MAX_FLASH_SECT      512     /* max num of sects on one chip */
 202 #undef CFG_FLASH_USE_BUFFER_WRITE       /* not supported yet for AMD */
 203
 204 #if !defined(CFG_LOWBOOT)
 205 #define CFG_ENV_ADDR            (CFG_FLASH_BASE + 0x00760000 + 0x00800000)
 206 #else   /* CFG_LOWBOOT */
 207 #define CFG_ENV_ADDR            (CFG_FLASH_BASE + 0x00060000)
 208 #endif  /* CFG_LOWBOOT */
 209 #define CFG_MAX_FLASH_BANKS     1       /* max num of flash banks
 210                                            (= chip selects) */
 211 #define CFG_FLASH_ERASE_TOUT    240000  /* Flash Erase Timeout (in ms)  */
 212 #define CFG_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (in ms)  */
 213
 214 /* Dynamic MTD partition support */
 215 #define CONFIG_JFFS2_CMDLINE
 216 #define MTDIDS_DEFAULT          "nor0=TQM5200-0"
 217 #define MTDPARTS_DEFAULT        "mtdparts=TQM5200-0:640k(firmware),"    \
 218                                                 "1408k(kernel),"        \
 219                                                 "2m(initrd),"           \
 220                                                 "4m(small-fs),"         \
 221                                                 "16m(big-fs),"          \
 222                                                 "8m(misc)"
 223
 224 /*
 225  * Environment settings
 226  */
 227 #define CFG_ENV_IS_IN_FLASH     1
 228 #define CFG_ENV_SIZE            0x10000
 229 #define CFG_ENV_SECT_SIZE       0x20000
 230 #define CFG_ENV_ADDR_REDUND     (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
 231 #define CFG_ENV_SIZE_REDUND     (CFG_ENV_SIZE)
 232
 233 /*
 234  * Memory map
 235  */
 236 #define CFG_MBAR                0xF0000000
 237 #define CFG_SDRAM_BASE          0x00000000
 238 #define CFG_DEFAULT_MBAR        0x80000000
 239
 240 /* Use ON-Chip SRAM until RAM will be available */
 241 #define CFG_INIT_RAM_ADDR       MPC5XXX_SRAM
 242 #ifdef CONFIG_POST
 243 /* preserve space for the post_word at end of on-chip SRAM */
 244 #define CFG_INIT_RAM_END        MPC5XXX_SRAM_POST_SIZE
 245 #else
 246 #define CFG_INIT_RAM_END        MPC5XXX_SRAM_SIZE
 247 #endif
 248
 249
 250 #define CFG_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
 251 #define CFG_GBL_DATA_OFFSET     (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 252 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
 253
 254 #define CFG_MONITOR_BASE        TEXT_BASE
 255 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
 256 #   define CFG_RAMBOOT          1
 257 #endif
 258
 259 #define CFG_MONITOR_LEN         (384 << 10)     /* Reserve 384 kB for Monitor   */
 260 #define CFG_MALLOC_LEN          (256 << 10)     /* Reserve 256 kB for malloc()  */
 261 #define CFG_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 262
 263 /*
 264  * Ethernet configuration
 265  */
 266 #define CONFIG_MPC5xxx_FEC      1
 267 /*
 268  * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
 269  */
 270 /* #define CONFIG_FEC_10MBIT 1 */
 271 #define CONFIG_PHY_ADDR         0x00
 272
 273 /*
 274  * GPIO configuration
 275  *
 276  * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1):
 277  *      Bit 0 (mask: 0x80000000): 1
 278  * use ALT CAN position: Bits 2-3 (mask: 0x30000000):
 279  *      00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
 280  *      01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
 281  *            Use for REV200 STK52XX boards. Do not use with REV100 modules
 282  *            (because, there I2C1 is used as I2C bus)
 283  * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
 284  * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030)
 285  *      000 -> All PSC2 pins are GIOPs
 286  *      001 -> CAN1/2 on PSC2 pins
 287  *             Use for REV100 STK52xx boards
 288  * use PSC6:
 289  *   on STK52xx:
 290  *      use as UART. Pins PSC6_0 to PSC6_3 are used.
 291  *      Bits 9:11 (mask: 0x00700000):
 292  *         101 -> PSC6 : Extended POST test is not available
 293  *   on MINI-FAP and TQM5200_IB:
 294  *      use PSC6_0 to PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000):
 295  *         000 -> PSC6 could not be used as UART, CODEC or IrDA
 296  *   GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST
 297  *   tests.
 298  */
 299 #if defined (CONFIG_MINIFAP)
 300 # define CFG_GPS_PORT_CONFIG    0x91000004
 301 #elif defined (CONFIG_STK52XX)
 302 # if defined (CONFIG_STK52XX_REV100)
 303 #  define CFG_GPS_PORT_CONFIG   0x81500014
 304 # else /* STK52xx REV200 and above */
 305 #  if defined (CONFIG_TQM5200_REV100)
 306 #   error TQM5200 REV100 not supported on STK52XX REV200 or above
 307 #  else/* TQM5200 REV200 and above */
 308 #   define CFG_GPS_PORT_CONFIG  0x91500004
 309 #  endif
 310 # endif
 311 #else  /* TMQ5200 Inbetriebnahme-Board */
 312 # define CFG_GPS_PORT_CONFIG    0x81000004
 313 #endif
 314
 315 /*
 316  * RTC configuration
 317  */
 318 #define CONFIG_RTC_MPC5200      1       /* use internal MPC5200 RTC */
 319
 320 /*
 321  * Miscellaneous configurable options
 322  */
 323 #define CFG_LONGHELP                    /* undef to save memory     */
 324 #define CFG_PROMPT              "=> "   /* Monitor Command Prompt   */
 325 #if defined(CONFIG_CMD_KGDB)
 326 #define CFG_CBSIZE              1024    /* Console I/O Buffer Size  */
 327 #else
 328 #define CFG_CBSIZE              256     /* Console I/O Buffer Size  */
 329 #endif
 330 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 331 #define CFG_MAXARGS             16      /* max number of command args   */
 332 #define CFG_BARGSIZE            CFG_CBSIZE      /* Boot Argument Buffer Size    */
 333
 334 /* Enable an alternate, more extensive memory test */
 335 #define CFG_ALT_MEMTEST
 336
 337 #define CFG_MEMTEST_START       0x00100000      /* memtest works on */
 338 #define CFG_MEMTEST_END         0x00f00000      /* 1 ... 15 MB in DRAM  */
 339
 340 #define CFG_LOAD_ADDR           0x100000        /* default load address */
 341
 342 #define CFG_HZ                  1000    /* decrementer freq: 1 ms ticks */
 343
 344 #define CFG_CACHELINE_SIZE      32      /* For MPC5xxx CPUs */
 345 #if defined(CONFIG_CMD_KGDB)
 346 #  define CFG_CACHELINE_SHIFT   5       /* log base 2 of the above value */
 347 #endif
 348
 349 /*
 350  * Enable loopw command.
 351  */
 352 #define CONFIG_LOOPW
 353
 354 /*
 355  * Various low-level settings
 356  */
 357 #if defined(CONFIG_MPC5200)
 358 #define CFG_HID0_INIT           HID0_ICE | HID0_ICFI
 359 #define CFG_HID0_FINAL          HID0_ICE
 360 #else
 361 #define CFG_HID0_INIT           0
 362 #define CFG_HID0_FINAL          0
 363 #endif
 364
 365 #define CFG_BOOTCS_START        CFG_FLASH_BASE
 366 #define CFG_BOOTCS_SIZE         CFG_FLASH_SIZE
 367 #ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
 368 #define CFG_BOOTCS_CFG          0x0008DF30 /* for pci_clk  = 66 MHz */
 369 #else
 370 #define CFG_BOOTCS_CFG          0x0004DF30 /* for pci_clk = 33 MHz */
 371 #endif
 372 #define CFG_CS0_START           CFG_FLASH_BASE
 373 #define CFG_CS0_SIZE            CFG_FLASH_SIZE
 374
 375 #define CFG_CS_BURST            0x00000000
 376 #define CFG_CS_DEADCYCLE        0x33333311      /* 1 dead cycle for flash and SM501 */
 377
 378 #define CFG_RESET_ADDRESS       0xff000000
 379
 380 #endif /* __CONFIG_H */