]>
git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/sniper.h
2 * LG Optimus Black codename sniper config
4 * Copyright (C) 2015 Paul Kocialkowski <contact@paulk.fr>
6 * SPDX-License-Identifier: GPL-2.0+
12 #include <asm/arch/cpu.h>
13 #include <asm/arch/omap.h>
19 #define CONFIG_ARM_ARCH_CP15_ERRATA
20 #define CONFIG_ARM_ERRATA_454179
21 #define CONFIG_ARM_ERRATA_430973
22 #define CONFIG_ARM_ERRATA_621766
34 #define CONFIG_MISC_INIT_R
40 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
41 #define CONFIG_SYS_PTV 2
43 #define V_NS16550_CLK 48000000
44 #define V_OSCK 26000000
45 #define V_SCLK (V_OSCK >> 1)
52 #define CONFIG_NR_DRAM_BANKS 2
53 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
54 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
60 #define CONFIG_SYS_TEXT_BASE 0x80100000
61 #define CONFIG_SYS_SDRAM_BASE 0x80000000
62 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
63 GENERATED_GBL_DATA_SIZE)
65 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024 + CONFIG_ENV_SIZE)
71 #define CONFIG_OMAP_GPIO
72 #define CONFIG_OMAP3_GPIO_2
73 #define CONFIG_OMAP3_GPIO_3
74 #define CONFIG_OMAP3_GPIO_4
75 #define CONFIG_OMAP3_GPIO_5
76 #define CONFIG_OMAP3_GPIO_6
82 #define CONFIG_SYS_I2C
83 #define CONFIG_SYS_OMAP24_I2C_SPEED 400000
84 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1
85 #define CONFIG_SYS_I2C_OMAP34XX
86 #define CONFIG_I2C_MULTI_BUS
92 #define CONFIG_SYS_NO_FLASH
98 #define CONFIG_TWL4030_POWER
104 #define CONFIG_TWL4030_INPUT
110 #define CONFIG_SPL_FRAMEWORK
112 #define CONFIG_SPL_TEXT_BASE 0x40200000
113 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
114 CONFIG_SPL_TEXT_BASE)
115 #define CONFIG_SPL_BSS_START_ADDR 0x80000000
116 #define CONFIG_SPL_BSS_MAX_SIZE (512 * 1024)
117 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000
118 #define CONFIG_SYS_SPL_MALLOC_SIZE (1024 * 1024)
119 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
121 #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
122 #define CONFIG_SPL_BOARD_INIT
124 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 2
126 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
127 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
129 #define CONFIG_AUTO_COMPLETE
131 #define CONFIG_SYS_LONGHELP
133 #define CONFIG_SYS_MAXARGS 16
134 #define CONFIG_SYS_CBSIZE 512
135 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \
142 #ifdef CONFIG_SPL_BUILD
143 #define CONFIG_SYS_NS16550_SERIAL
144 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
147 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
148 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
149 #define CONFIG_CONS_INDEX 3
151 #define CONFIG_BAUDRATE 115200
152 #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, \
159 #define CONFIG_USB_MUSB_PIO_ONLY
160 #define CONFIG_USB_MUSB_OMAP2PLUS
161 #define CONFIG_TWL4030_USB
167 #define CONFIG_USB_FUNCTION_FASTBOOT
169 #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
170 #define CONFIG_FASTBOOT_BUF_SIZE 0x2000000
172 #define CONFIG_FASTBOOT_FLASH
173 #define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
175 #define CONFIG_CMD_FASTBOOT
181 #define CONFIG_ENV_SIZE (128 * 1024)
182 #define CONFIG_ENV_IS_NOWHERE
184 #define CONFIG_ENV_OVERWRITE
186 #define CONFIG_EXTRA_ENV_SETTINGS \
187 "kernel_addr_r=0x82000000\0" \
188 "loadaddr=0x82000000\0" \
189 "fdt_addr_r=0x88000000\0" \
190 "fdtaddr=0x88000000\0" \
191 "ramdisk_addr_r=0x88080000\0" \
192 "pxefile_addr_r=0x80100000\0" \
193 "scriptaddr=0x80000000\0" \
194 "bootm_size=0x10000000\0" \
196 "kernel_mmc_part=3\0" \
197 "recovery_mmc_part=4\0" \
198 "fdtfile=omap3-sniper.dtb\0" \
199 "bootfile=/boot/extlinux/extlinux.conf\0" \
200 "bootargs=console=ttyO2,115200 vram=5M,0x9FA00000 omapfb.vram=0:5M\0"
206 #define CONFIG_SETUP_MEMORY_TAGS
207 #define CONFIG_CMDLINE_TAG
208 #define CONFIG_INITRD_TAG
209 #define CONFIG_REVISION_TAG
210 #define CONFIG_SERIAL_TAG
216 #define CONFIG_SYS_LOAD_ADDR 0x82000000
218 #define CONFIG_ANDROID_BOOT_IMAGE
220 #define CONFIG_BOOTCOMMAND \
221 "setenv boot_mmc_part ${kernel_mmc_part}; " \
222 "if test reboot-${reboot-mode} = reboot-r; then " \
223 "echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; " \
224 "if test reboot-${reboot-mode} = reboot-b; then " \
225 "echo fastboot; fastboot 0; fi; " \
226 "part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; " \
227 "part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; " \
228 "mmc dev ${boot_mmc_dev}; " \
229 "mmc read ${kernel_addr_r} ${boot_mmc_start} ${boot_mmc_size} && " \
230 "bootm ${kernel_addr_r};"
236 #include <config_defaults.h>
237 #include <config_distro_defaults.h>