]>
git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/sniper.h
a1431ca41d974da1f4ec2bd3f655697912ab47ab
2 * LG Optimus Black codename sniper config
4 * Copyright (C) 2015 Paul Kocialkowski <contact@paulk.fr>
6 * SPDX-License-Identifier: GPL-2.0+
12 #include <asm/arch/cpu.h>
13 #include <asm/arch/omap.h>
19 #define CONFIG_ARM_ARCH_CP15_ERRATA
20 #define CONFIG_ARM_ERRATA_454179
21 #define CONFIG_ARM_ERRATA_430973
22 #define CONFIG_ARM_ERRATA_621766
34 #define CONFIG_MISC_INIT_R
40 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
41 #define CONFIG_SYS_PTV 2
43 #define V_NS16550_CLK 48000000
44 #define V_OSCK 26000000
45 #define V_SCLK (V_OSCK >> 1)
52 #define CONFIG_NR_DRAM_BANKS 2
53 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
54 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
60 #define CONFIG_SYS_TEXT_BASE 0x80100000
61 #define CONFIG_SYS_SDRAM_BASE 0x80000000
62 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
63 GENERATED_GBL_DATA_SIZE)
65 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024 + CONFIG_ENV_SIZE)
71 #define CONFIG_OMAP_GPIO
72 #define CONFIG_OMAP3_GPIO_2
73 #define CONFIG_OMAP3_GPIO_3
74 #define CONFIG_OMAP3_GPIO_4
75 #define CONFIG_OMAP3_GPIO_5
76 #define CONFIG_OMAP3_GPIO_6
82 #define CONFIG_SYS_I2C
83 #define CONFIG_SYS_OMAP24_I2C_SPEED 400000
84 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1
85 #define CONFIG_SYS_I2C_OMAP34XX
86 #define CONFIG_I2C_MULTI_BUS
92 #define CONFIG_TWL4030_POWER
98 #define CONFIG_TWL4030_INPUT
104 #define CONFIG_SPL_FRAMEWORK
106 #define CONFIG_SPL_TEXT_BASE 0x40200000
107 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
108 CONFIG_SPL_TEXT_BASE)
109 #define CONFIG_SPL_BSS_START_ADDR 0x80000000
110 #define CONFIG_SPL_BSS_MAX_SIZE (512 * 1024)
111 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000
112 #define CONFIG_SYS_SPL_MALLOC_SIZE (1024 * 1024)
113 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
115 #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
116 #define CONFIG_SPL_BOARD_INIT
118 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 2
120 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
121 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
123 #define CONFIG_AUTO_COMPLETE
125 #define CONFIG_SYS_LONGHELP
127 #define CONFIG_SYS_MAXARGS 16
128 #define CONFIG_SYS_CBSIZE 512
129 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \
136 #ifdef CONFIG_SPL_BUILD
137 #define CONFIG_SYS_NS16550_SERIAL
138 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
141 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
142 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
143 #define CONFIG_CONS_INDEX 3
145 #define CONFIG_BAUDRATE 115200
146 #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, \
153 #define CONFIG_USB_MUSB_PIO_ONLY
154 #define CONFIG_USB_MUSB_OMAP2PLUS
155 #define CONFIG_TWL4030_USB
161 #define CONFIG_USB_FUNCTION_FASTBOOT
163 #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
164 #define CONFIG_FASTBOOT_BUF_SIZE 0x2000000
166 #define CONFIG_FASTBOOT_FLASH
167 #define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
169 #define CONFIG_CMD_FASTBOOT
175 #define CONFIG_ENV_SIZE (128 * 1024)
176 #define CONFIG_ENV_IS_NOWHERE
178 #define CONFIG_ENV_OVERWRITE
180 #define CONFIG_EXTRA_ENV_SETTINGS \
181 "kernel_addr_r=0x82000000\0" \
182 "loadaddr=0x82000000\0" \
183 "fdt_addr_r=0x88000000\0" \
184 "fdtaddr=0x88000000\0" \
185 "ramdisk_addr_r=0x88080000\0" \
186 "pxefile_addr_r=0x80100000\0" \
187 "scriptaddr=0x80000000\0" \
188 "bootm_size=0x10000000\0" \
190 "kernel_mmc_part=3\0" \
191 "recovery_mmc_part=4\0" \
192 "fdtfile=omap3-sniper.dtb\0" \
193 "bootfile=/boot/extlinux/extlinux.conf\0" \
194 "bootargs=console=ttyO2,115200 vram=5M,0x9FA00000 omapfb.vram=0:5M\0"
200 #define CONFIG_SETUP_MEMORY_TAGS
201 #define CONFIG_CMDLINE_TAG
202 #define CONFIG_INITRD_TAG
203 #define CONFIG_REVISION_TAG
204 #define CONFIG_SERIAL_TAG
210 #define CONFIG_SYS_LOAD_ADDR 0x82000000
212 #define CONFIG_ANDROID_BOOT_IMAGE
214 #define CONFIG_BOOTCOMMAND \
215 "setenv boot_mmc_part ${kernel_mmc_part}; " \
216 "if test reboot-${reboot-mode} = reboot-r; then " \
217 "echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; " \
218 "if test reboot-${reboot-mode} = reboot-b; then " \
219 "echo fastboot; fastboot 0; fi; " \
220 "part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; " \
221 "part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; " \
222 "mmc dev ${boot_mmc_dev}; " \
223 "mmc read ${kernel_addr_r} ${boot_mmc_start} ${boot_mmc_size} && " \
224 "bootm ${kernel_addr_r};"
230 #include <config_defaults.h>
231 #include <config_distro_defaults.h>