]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/socfpga_mcvevk.h
MIPS: add BMIPS Netgear CG3100D board
[people/ms/u-boot.git] / include / configs / socfpga_mcvevk.h
1 /*
2 * Copyright (C) 2015 Marek Vasut <marex@denx.de>
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6 #ifndef __CONFIG_ARIES_MCVEVK_H__
7 #define __CONFIG_ARIES_MCVEVK_H__
8
9 #include <asm/arch/base_addr_ac5.h>
10
11 /* U-Boot Commands */
12 #define CONFIG_FAT_WRITE
13 #define CONFIG_HW_WATCHDOG
14
15 /* Memory configurations */
16 #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on MCV */
17
18 /* Booting Linux */
19 #define CONFIG_BOOTFILE "fitImage"
20 #define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE)
21 #define CONFIG_PREBOOT "run try_bootscript"
22 #define CONFIG_BOOTCOMMAND "run mmc_mmc"
23 #define CONFIG_LOADADDR 0x01000000
24 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
25
26 /* Environment is in MMC */
27 #define CONFIG_ENV_OVERWRITE
28 #define CONFIG_ENV_IS_IN_MMC
29
30 /* Extra Environment */
31 #define CONFIG_EXTRA_ENV_SETTINGS \
32 "consdev=ttyS0\0" \
33 "baudrate=115200\0" \
34 "bootscript=boot.scr\0" \
35 "bootdev=/dev/mmcblk0p2\0" \
36 "rootdev=/dev/mmcblk0p3\0" \
37 "netdev=eth0\0" \
38 "hostname=mcvevk\0" \
39 "kernel_addr_r=0x10000000\0" \
40 "dfu_alt_info=mmc raw 0 3867148288\0" \
41 "update_filename=u-boot-with-spl.sfp\0" \
42 "update_sd_offset=0x800\0" \
43 "update_sd=" /* Update the SD firmware partition */ \
44 "if mmc rescan ; then " \
45 "if tftp ${update_filename} ; then " \
46 "setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \
47 "setexpr fw_sz ${fw_sz} + 1 ; " \
48 "mmc write ${loadaddr} ${update_sd_offset} ${fw_sz} ; " \
49 "fi ; " \
50 "fi\0" \
51 "update_qspi_offset=0x0\0" \
52 "update_qspi=" /* Update the QSPI firmware */ \
53 "if sf probe ; then " \
54 "if tftp ${update_filename} ; then " \
55 "sf update ${loadaddr} ${update_qspi_offset} ${filesize} ; " \
56 "fi ; " \
57 "fi\0" \
58 "fpga_filename=output_file.rbf\0" \
59 "load_fpga=" /* Load FPGA bitstream */ \
60 "if tftp ${fpga_filename} ; then " \
61 "fpga load 0 $loadaddr $filesize ; " \
62 "bridge enable ; " \
63 "fi\0" \
64 "addcons=" \
65 "setenv bootargs ${bootargs} " \
66 "console=${consdev},${baudrate}\0" \
67 "addip=" \
68 "setenv bootargs ${bootargs} " \
69 "ip=${ipaddr}:${serverip}:${gatewayip}:" \
70 "${netmask}:${hostname}:${netdev}:off\0" \
71 "addmisc=" \
72 "setenv bootargs ${bootargs} ${miscargs}\0" \
73 "addargs=run addcons addmisc\0" \
74 "mmcload=" \
75 "mmc rescan ; " \
76 "load mmc 0:2 ${kernel_addr_r} ${bootfile}\0" \
77 "netload=" \
78 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
79 "miscargs=nohlt panic=1\0" \
80 "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
81 "nfsargs=" \
82 "setenv bootargs root=/dev/nfs rw " \
83 "nfsroot=${serverip}:${rootpath},v3,tcp\0" \
84 "mmc_mmc=" \
85 "run mmcload mmcargs addargs ; " \
86 "bootm ${kernel_addr_r}\0" \
87 "mmc_nfs=" \
88 "run mmcload nfsargs addip addargs ; " \
89 "bootm ${kernel_addr_r}\0" \
90 "net_mmc=" \
91 "run netload mmcargs addargs ; " \
92 "bootm ${kernel_addr_r}\0" \
93 "net_nfs=" \
94 "run netload nfsargs addip addargs ; " \
95 "bootm ${kernel_addr_r}\0" \
96 "try_bootscript=" \
97 "mmc rescan;" \
98 "if test -e mmc 0:2 ${bootscript} ; then " \
99 "if load mmc 0:2 ${kernel_addr_r} ${bootscript};" \
100 "then ; " \
101 "echo Running bootscript... ; " \
102 "source ${kernel_addr_r} ; " \
103 "fi ; " \
104 "fi\0"
105
106 /* The rest of the configuration is shared */
107 #include <configs/socfpga_common.h>
108
109 #endif /* __CONFIG_ARIES_MCVEVK_H__ */