include/configs/stxssa.h

   1 /*
   2  * (C) Copyright 2005 Embedded Alley Solutions, Inc.
   3  * Dan Malek <dan@embeddedalley.com>
   4  * Copied from STx GP3.
   5  * Updates for Silicon Tx GP3 SSA board.
   6  *
   7  * (C) Copyright 2002,2003 Motorola,Inc.
   8  * Xianghua Xiao <X.Xiao@motorola.com>
   9  *
  10  * See file CREDITS for list of people who contributed to this
  11  * project.
  12  *
  13  * This program is free software; you can redistribute it and/or
  14  * modify it under the terms of the GNU General Public License as
  15  * published by the Free Software Foundation; either version 2 of
  16  * the License, or (at your option) any later version.
  17  *
  18  * This program is distributed in the hope that it will be useful,
  19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  * GNU General Public License for more details.
  22  *
  23  * You should have received a copy of the GNU General Public License
  24  * along with this program; if not, write to the Free Software
  25  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  26  * MA 02111-1307 USA
  27  */
  28
  29 /* mpc8560ads board configuration file */
  30 /* please refer to doc/README.mpc85xx for more info */
  31 /* make sure you change the MAC address and other network params first,
  32  * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
  33  */
  34
  35 #ifndef __CONFIG_H
  36 #define __CONFIG_H
  37
  38 /* High Level Configuration Options */
  39 #define CONFIG_BOOKE            1       /* BOOKE                */
  40 #define CONFIG_E500             1       /* BOOKE e500 family    */
  41 #define CONFIG_MPC85xx          1       /* MPC8540/MPC8560      */
  42 #define CONFIG_CPM2             1       /* has CPM2 */
  43 #define CONFIG_STXSSA           1       /* Silicon Tx GPPP SSA board specific*/
  44
  45 #define CONFIG_PCI                      /* PCI ethernet support */
  46 #define CONFIG_TSEC_ENET                /* tsec ethernet support*/
  47 #undef CONFIG_ETHER_ON_FCC              /* cpm FCC ethernet support */
  48 #define CONFIG_ENV_OVERWRITE
  49 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
  50 #undef  CONFIG_DDR_ECC                  /* only for ECC DDR module */
  51 #undef CONFIG_DDR_DLL                   /* possible DLL fix needed */
  52 #define CONFIG_DDR_2T_TIMING            /* Sets the 2T timing bit */
  53
  54 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  55
  56 /* sysclk for MPC85xx
  57  */
  58
  59 #define CONFIG_SYS_CLK_FREQ     33000000 /* most pci cards are 33Mhz */
  60
  61 /* Blinkin' LEDs for Robert :-)
  62 */
  63 #define CONFIG_SHOW_ACTIVITY 1
  64
  65 /*
  66  * These can be toggled for performance analysis, otherwise use default.
  67  */
  68 #define CONFIG_L2_CACHE                         /* toggle L2 cache             */
  69 #define  CONFIG_BTB                             /* toggle branch predition */
  70 #define  CONFIG_ADDR_STREAMING                  /* toggle addr streaming        */
  71
  72 #define CONFIG_BOARD_EARLY_INIT_F   1           /* Call board_pre_init   */
  73
  74 #undef  CFG_DRAM_TEST                           /* memory test, takes time      */
  75 #define CFG_MEMTEST_START       0x00200000      /* memtest region */
  76 #define CFG_MEMTEST_END         0x00400000
  77
  78
  79 /* Localbus connector.  There are many options that can be
  80  * connected here, including sdram or lots of flash.
  81  * This address, however, is used to configure a 256M local bus
  82  * window that includes the Config latch below.
  83  */
  84 #define CFG_LBC_OPTION_BASE     0xF0000000      /* Localbus Extension */
  85 #define CFG_LBC_OPTION_SIZE     256             /* 256MB */
  86
  87 /* There are various flash options used, we configure for the largest,
  88  * which is 64Mbytes.  The CFI works fine and will discover the proper
  89  * sizes.
  90  */
  91 #ifdef CONFIG_STXSSA_4M
  92 #define CFG_FLASH_BASE          0xFFC00000      /* start of  4 MiB flash */
  93 #else
  94 #define CFG_FLASH_BASE          0xFC000000      /* start of 64 MiB flash */
  95 #endif
  96 #define CFG_BR0_PRELIM  (CFG_FLASH_BASE | 0x1801) /* port size 32bit     */
  97 #define CFG_OR0_PRELIM  (CFG_FLASH_BASE | 0x0FF7)
  98
  99 #define CFG_FLASH_CFI           1
 100 #define CFG_FLASH_CFI_DRIVER    1
 101 #undef CFG_FLASH_USE_BUFFER_WRITE       /* use buffered writes (20x faster) */
 102 #define CFG_MAX_FLASH_SECT      256     /* max number of sectors on one chip */
 103 #define CFG_MAX_FLASH_BANKS     1       /* max number of memory banks   */
 104
 105 #define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
 106
 107 #define CFG_FLASH_PROTECTION
 108
 109 /* The configuration latch is Chip Select 1.
 110  * It's an 8-bit latch in the lower 8 bits of the word.
 111  */
 112 #define CFG_LBC_CFGLATCH_BASE   0xFB000000      /* Base of config latch */
 113 #define CFG_BR1_PRELIM          0xFB001801      /* 32-bit port */
 114 #define CFG_OR1_PRELIM          0xFFFF0FF7      /* 64K is enough */
 115
 116 #define CFG_MONITOR_BASE        TEXT_BASE       /* start of monitor     */
 117
 118 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
 119 #define CFG_RAMBOOT
 120 #else
 121 #undef  CFG_RAMBOOT
 122 #endif
 123
 124 #ifdef CFG_RAMBOOT
 125 #define CFG_CCSRBAR_DEFAULT     0x40000000      /* CCSRBAR by BDI cfg   */
 126 #else
 127 #define CFG_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default      */
 128 #endif
 129 #define CFG_CCSRBAR             0xe0000000      /* relocated CCSRBAR    */
 130 #define CFG_IMMR                CFG_CCSRBAR     /* PQII uses CFG_IMMR   */
 131
 132
 133 /*
 134  * DDR Setup
 135  */
 136
 137 /*
 138  * Base addresses -- Note these are effective addresses where the
 139  * actual resources get mapped (not physical addresses)
 140  */
 141 #define CFG_DDR_SDRAM_BASE      0x00000000      /* DDR is system memory  */
 142 #define CFG_SDRAM_BASE          CFG_DDR_SDRAM_BASE
 143
 144 #define SPD_EEPROM_ADDRESS      0x54            /*  DDR DIMM */
 145
 146 #undef CONFIG_CLOCKS_IN_MHZ
 147
 148 /* local bus definitions */
 149 #define CFG_BR2_PRELIM          0xf8001861      /* 64MB localbus SDRAM  */
 150 #define CFG_OR2_PRELIM          0xfc006901
 151 #define CFG_LBC_LCRR            0x00030004      /* local bus freq       */
 152 #define CFG_LBC_LBCR            0x00000000
 153 #define CFG_LBC_LSRT            0x20000000
 154 #define CFG_LBC_MRTPR           0x20000000
 155 #define CFG_LBC_LSDMR_1         0x2861b723
 156 #define CFG_LBC_LSDMR_2         0x0861b723
 157 #define CFG_LBC_LSDMR_3         0x0861b723
 158 #define CFG_LBC_LSDMR_4         0x1861b723
 159 #define CFG_LBC_LSDMR_5         0x4061b723
 160
 161 #define CONFIG_L1_INIT_RAM
 162 #define CFG_INIT_RAM_LOCK       1
 163 #define CFG_INIT_RAM_ADDR       0x60000000      /* Initial RAM address  */
 164 #define CFG_INIT_RAM_END        0x4000          /* End of used area in RAM */
 165
 166 #define CFG_GBL_DATA_SIZE       128             /* num bytes initial data */
 167 #define CFG_GBL_DATA_OFFSET     (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 168 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
 169
 170 #define CFG_MONITOR_LEN         (256 * 1024)    /* Reserve 256 kB for Mon */
 171 #define CFG_MALLOC_LEN          (512 * 1024)    /* Reserved for malloc */
 172
 173 /* Serial Port */
 174 #define CONFIG_CONS_INDEX     2
 175 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 176 #define CFG_NS16550
 177 #define CFG_NS16550_SERIAL
 178 #define CFG_NS16550_REG_SIZE    1
 179 #define CFG_NS16550_CLK         get_bus_freq(0)
 180
 181 #define CFG_BAUDRATE_TABLE  \
 182         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 183
 184 #define CFG_NS16550_COM1        (CFG_CCSRBAR+0x4500)
 185 #define CFG_NS16550_COM2        (CFG_CCSRBAR+0x4600)
 186
 187 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 188 #define CFG_HUSH_PARSER         1       /* Use the HUSH parser          */
 189 #ifdef  CFG_HUSH_PARSER
 190 #define CFG_PROMPT_HUSH_PS2 "> "
 191 #endif
 192
 193 /*
 194  * I2C
 195  */
 196 #define CONFIG_FSL_I2C                  /* Use FSL common I2C driver */
 197 #define  CONFIG_HARD_I2C                /* I2C with hardware support*/
 198 #undef  CONFIG_SOFT_I2C                 /* I2C bit-banged */
 199 #define CFG_I2C_SPEED           400000  /* I2C speed and slave address  */
 200 #define CFG_I2C_SLAVE           0x7F
 201 #undef CFG_I2C_NOPROBES
 202 #define CFG_I2C_OFFSET          0x3000
 203
 204 /* I2C RTC */
 205 #define CONFIG_RTC_DS1337               /* This is really a DS1339 RTC  */
 206 #define CFG_I2C_RTC_ADDR        0x68    /* at address 0x68              */
 207
 208 /* I2C EEPROM.  AT24C32, we keep our environment in here.
 209 */
 210 #define CFG_I2C_EEPROM_ADDR             0x51    /* 1010001x             */
 211 #define CFG_I2C_EEPROM_ADDR_LEN         2
 212 #define CFG_EEPROM_PAGE_WRITE_BITS      5       /* =32 Bytes per write  */
 213 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 214 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS  20
 215
 216 /*
 217  * Standard 8555 PCI mapping.
 218  * Addresses are mapped 1-1.
 219  */
 220 #define CFG_PCI1_MEM_BASE       0x80000000
 221 #define CFG_PCI1_MEM_PHYS       CFG_PCI1_MEM_BASE
 222 #define CFG_PCI1_MEM_SIZE       0x20000000      /* 512M */
 223 #define CFG_PCI1_IO_BASE        0x00000000
 224 #define CFG_PCI1_IO_PHYS        0xe2000000
 225 #define CFG_PCI1_IO_SIZE        0x01000000      /* 16M */
 226
 227 #define CFG_PCI2_MEM_BASE       0xa0000000
 228 #define CFG_PCI2_MEM_PHYS       CFG_PCI2_MEM_BASE
 229 #define CFG_PCI2_MEM_SIZE       0x20000000      /* 512M */
 230 #define CFG_PCI2_IO_BASE        0x00000000
 231 #define CFG_PCI2_IO_PHYS        0xe3000000
 232 #define CFG_PCI2_IO_SIZE        0x01000000      /* 16M */
 233
 234 #if defined(CONFIG_PCI)                 /* PCI Ethernet card */
 235 #define CONFIG_MPC85XX_PCI2     1
 236 #define CONFIG_NET_MULTI
 237 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 238
 239 #define CONFIG_EEPRO100
 240 #define CONFIG_TULIP
 241
 242 #if !defined(CONFIG_PCI_PNP)
 243   #define PCI_ENET0_IOADDR      0xe0000000
 244   #define PCI_ENET0_MEMADDR     0xe0000000
 245   #define PCI_IDSEL_NUMBER      0x0c    /* slot0->3(IDSEL)=12->15 */
 246 #endif
 247
 248 #define CONFIG_PCI_SCAN_SHOW
 249 #define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 250
 251 #endif /* CONFIG_PCI */
 252
 253 #if defined(CONFIG_TSEC_ENET)
 254
 255 #ifndef CONFIG_NET_MULTI
 256 #define CONFIG_NET_MULTI        1
 257 #endif
 258
 259 #define CONFIG_MII              1       /* MII PHY management           */
 260
 261 #define CONFIG_TSEC1    1
 262 #define CONFIG_TSEC1_NAME       "TSEC0"
 263 #define CONFIG_TSEC2    1
 264 #define CONFIG_TSEC2_NAME       "TSEC1"
 265
 266 #define TSEC1_PHY_ADDR          2
 267 #define TSEC2_PHY_ADDR          4
 268 #define TSEC1_PHYIDX            0
 269 #define TSEC2_PHYIDX            0
 270 #define TSEC1_FLAGS             TSEC_GIGABIT
 271 #define TSEC2_FLAGS             TSEC_GIGABIT
 272 #define CONFIG_ETHPRIME         "TSEC0"
 273
 274 #elif defined(CONFIG_ETHER_ON_FCC)      /* CPM FCC Ethernet */
 275
 276 #define CONFIG_ETHER_ON_FCC2            /* define if ether on FCC   */
 277 #undef  CONFIG_ETHER_NONE               /* define if ether on something else */
 278 #define CONFIG_ETHER_INDEX      2       /* which channel for ether  */
 279
 280 #if (CONFIG_ETHER_INDEX == 2)
 281   /*
 282    * - Rx-CLK is CLK13
 283    * - Tx-CLK is CLK14
 284    * - Select bus for bd/buffers
 285    * - Full duplex
 286    */
 287   #define CFG_CMXFCR_MASK       (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
 288   #define CFG_CMXFCR_VALUE      (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
 289   #define CFG_CPMFCR_RAMTYPE    0
 290 #if 0
 291   #define CFG_FCC_PSMR          (FCC_PSMR_FDE)
 292 #else
 293   #define CFG_FCC_PSMR          0
 294 #endif
 295   #define FETH2_RST             0x01
 296 #elif (CONFIG_ETHER_INDEX == 3)
 297   /* need more definitions here for FE3 */
 298   #define FETH3_RST             0x80
 299 #endif                                  /* CONFIG_ETHER_INDEX */
 300
 301 /* MDIO is done through the TSEC0 control.
 302 */
 303 #define CONFIG_MII                      /* MII PHY management */
 304 #undef CONFIG_BITBANGMII                /* bit-bang MII PHY management  */
 305
 306 #endif
 307
 308 /* Environment - default config is in flash, see below */
 309 #if 0   /* in EEPROM */
 310 # define CFG_ENV_IS_IN_EEPROM   1
 311 # define CFG_ENV_OFFSET         0
 312 # define CFG_ENV_SIZE           2048
 313 #else   /* in flash */
 314 # define CFG_ENV_IS_IN_FLASH    1
 315 # ifdef CONFIG_STXSSA_4M
 316 #  define CFG_ENV_SECT_SIZE     0x20000
 317 # else  /* default configuration - 64 MiB flash */
 318 #  define CFG_ENV_SECT_SIZE     0x40000
 319 # endif
 320 # define CFG_ENV_ADDR           (CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
 321 # define CFG_ENV_SIZE           0x4000
 322 # define CFG_ENV_ADDR_REDUND    (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
 323 # define CFG_ENV_SIZE_REDUND    (CFG_ENV_SIZE)
 324 #endif
 325
 326 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
 327 #define CFG_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
 328
 329 #define CONFIG_TIMESTAMP                /* Print image info with ts     */
 330
 331
 332 /*
 333  * BOOTP options
 334  */
 335 #define CONFIG_BOOTP_BOOTFILESIZE
 336 #define CONFIG_BOOTP_BOOTPATH
 337 #define CONFIG_BOOTP_GATEWAY
 338 #define CONFIG_BOOTP_HOSTNAME
 339
 340
 341 /*
 342  * Command line configuration.
 343  */
 344 #include <config_cmd_default.h>
 345
 346 #define CONFIG_CMD_DATE
 347 #define CONFIG_CMD_DHCP
 348 #define CONFIG_CMD_EEPROM
 349 #define CONFIG_CMD_I2C
 350 #define CONFIG_CMD_NFS
 351 #define CONFIG_CMD_PING
 352 #define CONFIG_CMD_SNTP
 353
 354 #if defined(CONFIG_PCI)
 355     #define CONFIG_CMD_PCI
 356 #endif
 357
 358 #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
 359     #define CONFIG_CMD_MII
 360 #endif
 361
 362 #if defined(CFG_RAMBOOT)
 363     #undef CONFIG_CMD_ENV
 364     #undef CONFIG_CMD_LOADS
 365 #else
 366     #define CONFIG_CMD_ELF
 367 #endif
 368
 369
 370 #undef CONFIG_WATCHDOG                  /* watchdog disabled            */
 371
 372 /*
 373  * Miscellaneous configurable options
 374  */
 375 #define CFG_LONGHELP                    /* undef to save memory         */
 376 #define CFG_PROMPT      "SSA=> "        /* Monitor Command Prompt       */
 377 #if defined(CONFIG_CMD_KGDB)
 378 #define CFG_CBSIZE      1024            /* Console I/O Buffer Size      */
 379 #else
 380 #define CFG_CBSIZE      256             /* Console I/O Buffer Size      */
 381 #endif
 382 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 383 #define CFG_MAXARGS     16              /* max number of command args   */
 384 #define CFG_BARGSIZE    CFG_CBSIZE      /* Boot Argument Buffer Size    */
 385 #define CFG_LOAD_ADDR   0x1000000       /* default load address */
 386 #define CFG_HZ          1000            /* decrementer freq: 1 ms ticks */
 387
 388 /*
 389  * For booting Linux, the board info and command line data
 390  * have to be in the first 8 MB of memory, since this is
 391  * the maximum mapped by the Linux kernel during initialization.
 392  */
 393 #define CFG_BOOTMAPSZ           (8 << 20) /* Initial Memory map for Linux */
 394
 395 /*
 396  * Internal Definitions
 397  *
 398  * Boot Flags
 399  */
 400 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH */
 401 #define BOOTFLAG_WARM   0x02            /* Software reboot              */
 402
 403 #if defined(CONFIG_CMD_KGDB)
 404 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 405 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 406 #endif
 407
 408 /*Note: change below for your network setting!!! */
 409 #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
 410 #define CONFIG_HAS_ETH0
 411 #define CONFIG_ETHADDR   00:e0:0c:07:9b:8a
 412 #define CONFIG_HAS_ETH1
 413 #define CONFIG_ETH1ADDR  00:e0:0c:07:9b:8b
 414 #define CONFIG_HAS_ETH2
 415 #define CONFIG_ETH2ADDR  00:e0:0c:07:9b:8c
 416 #endif
 417
 418 /*
 419  * Environment in EEPROM is compatible with different flash sector sizes,
 420  * but only little space is available, so we use a very simple setup.
 421  * With environment in flash, we use a more powerful default configuration.
 422  */
 423 #ifdef CFG_ENV_IS_IN_EEPROM             /* use restricted "standard" environment */
 424
 425 #define CONFIG_BAUDRATE         38400
 426
 427 #define CONFIG_BOOTDELAY        3       /* -1 disable autoboot */
 428 #define CONFIG_BOOTCOMMAND      "bootm 0xffc00000 0xffd00000"
 429 #define CONFIG_BOOTARGS         "root=/dev/nfs rw ip=any console=ttyS1,$baudrate"
 430 #define CONFIG_SERVERIP         192.168.85.1
 431 #define CONFIG_IPADDR           192.168.85.60
 432 #define CONFIG_GATEWAYIP        192.168.85.1
 433 #define CONFIG_NETMASK          255.255.255.0
 434 #define CONFIG_HOSTNAME         STX_SSA
 435 #define CONFIG_ROOTPATH         /gppproot
 436 #define CONFIG_BOOTFILE         uImage
 437 #define CONFIG_LOADADDR         0x1000000
 438
 439 #else /* ENV IS IN FLASH                -- use a full-blown envionment */
 440
 441 #define CONFIG_BAUDRATE         115200
 442
 443 #define CONFIG_BOOTDELAY        5       /* -1 disable autoboot */
 444
 445 #define CONFIG_PREBOOT  "echo;" \
 446         "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 447         "echo"
 448
 449 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs   */
 450
 451 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 452         "hostname=gp3ssa\0"                                             \
 453         "bootfile=/tftpboot/gp3ssa/uImage\0"                            \
 454         "loadaddr=400000\0"                                             \
 455         "netdev=eth0\0"                                                 \
 456         "consdev=ttyS1\0"                                               \
 457         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 458                 "nfsroot=$serverip:$rootpath\0"                         \
 459         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 460         "addip=setenv bootargs $bootargs "                              \
 461                 "ip=$ipaddr:$serverip:$gatewayip:$netmask"              \
 462                 ":$hostname:$netdev:off panic=1\0"                      \
 463         "addcons=setenv bootargs $bootargs "                            \
 464                 "console=$consdev,$baudrate\0"                          \
 465         "flash_nfs=run nfsargs addip addcons;"                          \
 466                 "bootm $kernel_addr\0"                                  \
 467         "flash_self=run ramargs addip addcons;"                         \
 468                 "bootm $kernel_addr $ramdisk_addr\0"                    \
 469         "net_nfs=tftp $loadaddr $bootfile;"                             \
 470                 "run nfsargs addip addcons;bootm\0"                     \
 471         "rootpath=/opt/eldk/ppc_85xx\0"                                 \
 472         "kernel_addr=FC000000\0"                                        \
 473         "ramdisk_addr=FC200000\0"                                       \
 474         ""
 475 #define CONFIG_BOOTCOMMAND      "run flash_self"
 476
 477 #endif  /* CFG_ENV_IS_IN_EEPROM */
 478
 479 #endif  /* __CONFIG_H */