include/configs/sunxi-common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
   4  *
   5  * (C) Copyright 2007-2011
   6  * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
   7  * Tom Cubie <tangliang@allwinnertech.com>
   8  *
   9  * Configuration settings for the Allwinner sunxi series of boards.
  10  */
  11
  12 #ifndef _SUNXI_COMMON_CONFIG_H
  13 #define _SUNXI_COMMON_CONFIG_H
  14
  15 #include <asm/arch/cpu.h>
  16 #include <linux/stringify.h>
  17
  18 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
  19 /*
  20  * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the
  21  * expense of restricting some features, so the regular machine id values can
  22  * be used.
  23  */
  24 # define CONFIG_MACH_TYPE_COMPAT_REV    0
  25 #else
  26 /*
  27  * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels.
  28  * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass
  29  * beyond the machine id check.
  30  */
  31 # define CONFIG_MACH_TYPE_COMPAT_REV    1
  32 #endif
  33
  34 #ifdef CONFIG_ARM64
  35 #define CONFIG_BUILD_TARGET "u-boot.itb"
  36 #define CONFIG_SYS_BOOTM_LEN            (32 << 20)
  37 #endif
  38
  39 /* Serial & console */
  40 #define CONFIG_SYS_NS16550_SERIAL
  41 /* ns16550 reg in the low bits of cpu reg */
  42 #define CONFIG_SYS_NS16550_CLK          24000000
  43 #ifndef CONFIG_DM_SERIAL
  44 # define CONFIG_SYS_NS16550_REG_SIZE    -4
  45 # define CONFIG_SYS_NS16550_COM1                SUNXI_UART0_BASE
  46 # define CONFIG_SYS_NS16550_COM2                SUNXI_UART1_BASE
  47 # define CONFIG_SYS_NS16550_COM3                SUNXI_UART2_BASE
  48 # define CONFIG_SYS_NS16550_COM4                SUNXI_UART3_BASE
  49 # define CONFIG_SYS_NS16550_COM5                SUNXI_R_UART_BASE
  50 #endif
  51
  52 /* CPU */
  53 #define COUNTER_FREQUENCY               24000000
  54
  55 /*
  56  * The DRAM Base differs between some models. We cannot use macros for the
  57  * CONFIG_FOO defines which contain the DRAM base address since they end
  58  * up unexpanded in include/autoconf.mk .
  59  *
  60  * So we have to have this #ifdef #else #endif block for these.
  61  */
  62 #ifdef CONFIG_MACH_SUN9I
  63 #define SDRAM_OFFSET(x) 0x2##x
  64 #define CONFIG_SYS_SDRAM_BASE           0x20000000
  65 #define CONFIG_SYS_LOAD_ADDR            0x22000000 /* default load address */
  66 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
  67  * since it needs to fit in with the other values. By also #defining it
  68  * we get warnings if the Kconfig value mismatches. */
  69 #define CONFIG_SPL_STACK_R_ADDR         0x2fe00000
  70 #define CONFIG_SPL_BSS_START_ADDR       0x2ff80000
  71 #else
  72 #define SDRAM_OFFSET(x) 0x4##x
  73 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  74 #define CONFIG_SYS_LOAD_ADDR            0x42000000 /* default load address */
  75 /* V3s do not have enough memory to place code at 0x4a000000 */
  76 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
  77  * since it needs to fit in with the other values. By also #defining it
  78  * we get warnings if the Kconfig value mismatches. */
  79 #define CONFIG_SPL_STACK_R_ADDR         0x4fe00000
  80 #define CONFIG_SPL_BSS_START_ADDR       0x4ff80000
  81 #endif
  82
  83 #define CONFIG_SPL_BSS_MAX_SIZE         0x00080000 /* 512 KiB */
  84
  85 /*
  86  * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
  87  * slightly bigger. Note that it is possible to map the first 32 KiB of the
  88  * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the
  89  * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and
  90  * the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
  91  * A64 and H5 also has SRAM A1 at 0x00010000, but no magic remap register
  92  * is known yet.
  93  * H6 has SRAM A1 at 0x00020000.
  94  */
  95 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SUNXI_SRAM_ADDRESS
  96 /* FIXME: this may be larger on some SoCs */
  97 #define CONFIG_SYS_INIT_RAM_SIZE        0x8000 /* 32 KiB */
  98
  99 #define CONFIG_SYS_INIT_SP_OFFSET \
 100         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 101 #define CONFIG_SYS_INIT_SP_ADDR \
 102         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 103
 104 #define PHYS_SDRAM_0                    CONFIG_SYS_SDRAM_BASE
 105 #define PHYS_SDRAM_0_SIZE               0x80000000 /* 2 GiB */
 106
 107 #ifdef CONFIG_AHCI
 108 #define CONFIG_SCSI_AHCI_PLAT
 109 #define CONFIG_SUNXI_AHCI
 110 #define CONFIG_SYS_64BIT_LBA
 111 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     1
 112 #define CONFIG_SYS_SCSI_MAX_LUN         1
 113 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 114                                          CONFIG_SYS_SCSI_MAX_LUN)
 115 #endif
 116
 117 #define CONFIG_SETUP_MEMORY_TAGS
 118 #define CONFIG_CMDLINE_TAG
 119 #define CONFIG_INITRD_TAG
 120 #define CONFIG_SERIAL_TAG
 121
 122 #ifdef CONFIG_NAND_SUNXI
 123 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664
 124 #define CONFIG_SYS_NAND_ONFI_DETECTION
 125 #define CONFIG_SYS_MAX_NAND_DEVICE 8
 126 #endif
 127
 128 #ifdef CONFIG_SPL_SPI_SUNXI
 129 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x8000
 130 #endif
 131
 132 /* mmc config */
 133 #ifdef CONFIG_MMC
 134 #define CONFIG_MMC_SUNXI_SLOT           0
 135 #endif
 136
 137 #if defined(CONFIG_ENV_IS_IN_MMC)
 138
 139 #ifdef CONFIG_ARM64
 140 /*
 141  * This is actually (CONFIG_ENV_OFFSET -
 142  * (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)), but the value will be used
 143  * directly in a makefile, without the preprocessor expansion.
 144  */
 145 #define CONFIG_BOARD_SIZE_LIMIT         0x7e000
 146 #endif
 147
 148 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
 149 /* If we have two devices (most likely eMMC + MMC), favour the eMMC */
 150 #define CONFIG_SYS_MMC_ENV_DEV          1
 151 #else
 152 /* Otherwise, use the only device we have */
 153 #define CONFIG_SYS_MMC_ENV_DEV          0
 154 #endif
 155 #define CONFIG_SYS_MMC_MAX_DEVICE       4
 156 #endif
 157
 158 #ifndef CONFIG_MACH_SUN8I_V3S
 159 /* 64MB of malloc() pool */
 160 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (64 << 20))
 161 #else
 162 /* 2MB of malloc() pool */
 163 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (2 << 20))
 164 #endif
 165
 166 /*
 167  * Miscellaneous configurable options
 168  */
 169 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
 170 #define CONFIG_SYS_PBSIZE       1024    /* Print Buffer Size */
 171
 172 /* standalone support */
 173 #define CONFIG_STANDALONE_LOAD_ADDR     CONFIG_SYS_LOAD_ADDR
 174
 175 /* FLASH and environment organization */
 176
 177 #define CONFIG_SYS_MONITOR_LEN          (768 << 10)     /* 768 KiB */
 178
 179 #ifndef CONFIG_ARM64            /* AArch64 FEL support is not ready yet */
 180 #define CONFIG_SPL_BOARD_LOAD_IMAGE
 181 #endif
 182
 183 /*
 184  * We cannot use expressions here, because expressions won't be evaluated in
 185  * autoconf.mk.
 186  */
 187 #if CONFIG_SUNXI_SRAM_ADDRESS == 0x10000
 188 #define CONFIG_SPL_TEXT_BASE            0x10060         /* sram start+header */
 189 #define CONFIG_SPL_MAX_SIZE             0x7fa0          /* 32 KiB */
 190 #ifdef CONFIG_ARM64
 191 /* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */
 192 #define LOW_LEVEL_SRAM_STACK            0x00054000
 193 #else
 194 #define LOW_LEVEL_SRAM_STACK            0x00018000
 195 #endif /* !CONFIG_ARM64 */
 196 #elif CONFIG_SUNXI_SRAM_ADDRESS == 0x20000
 197 #define CONFIG_SPL_TEXT_BASE            0x20060         /* sram start+header */
 198 #define CONFIG_SPL_MAX_SIZE             0x7fa0          /* 32 KiB */
 199 /* end of SRAM A2 on H6 for now */
 200 #define LOW_LEVEL_SRAM_STACK            0x00118000
 201 #else
 202 #define CONFIG_SPL_TEXT_BASE            0x60            /* sram start+header */
 203 #define CONFIG_SPL_MAX_SIZE             0x5fa0          /* 24KB on sun4i/sun7i */
 204 #define LOW_LEVEL_SRAM_STACK            0x00008000      /* End of sram */
 205 #endif
 206
 207 #define CONFIG_SPL_STACK                LOW_LEVEL_SRAM_STACK
 208
 209 #define CONFIG_SPL_PAD_TO               32768           /* decimal for 'dd' */
 210
 211
 212 /* I2C */
 213 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
 214     defined CONFIG_SY8106A_POWER
 215 #endif
 216
 217 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
 218     defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \
 219     defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE
 220 #define CONFIG_SYS_I2C_MVTWSI
 221 #ifndef CONFIG_DM_I2C
 222 #define CONFIG_SYS_I2C
 223 #define CONFIG_SYS_I2C_SPEED            400000
 224 #define CONFIG_SYS_I2C_SLAVE            0x7f
 225 #endif
 226 #endif
 227
 228 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
 229 #define CONFIG_SYS_I2C_SOFT
 230 #define CONFIG_SYS_I2C_SOFT_SPEED       50000
 231 #define CONFIG_SYS_I2C_SOFT_SLAVE       0x00
 232 /* We use pin names in Kconfig and sunxi_name_to_gpio() */
 233 #define CONFIG_SOFT_I2C_GPIO_SDA        soft_i2c_gpio_sda
 234 #define CONFIG_SOFT_I2C_GPIO_SCL        soft_i2c_gpio_scl
 235 #ifndef __ASSEMBLY__
 236 extern int soft_i2c_gpio_sda;
 237 extern int soft_i2c_gpio_scl;
 238 #endif
 239 #define CONFIG_VIDEO_LCD_I2C_BUS        0 /* The lcd panel soft i2c is bus 0 */
 240 #define CONFIG_SYS_SPD_BUS_NUM          1 /* And the axp209 i2c bus is bus 1 */
 241 #else
 242 #define CONFIG_SYS_SPD_BUS_NUM          0 /* The axp209 i2c bus is bus 0 */
 243 #define CONFIG_VIDEO_LCD_I2C_BUS        -1 /* NA, but necessary to compile */
 244 #endif
 245
 246 /* PMU */
 247 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
 248     defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \
 249     defined CONFIG_SY8106A_POWER
 250 #endif
 251
 252 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE
 253 #if CONFIG_CONS_INDEX == 1
 254 #ifdef CONFIG_MACH_SUN9I
 255 #define OF_STDOUT_PATH          "/soc/serial@07000000:115200"
 256 #else
 257 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28000:115200"
 258 #endif
 259 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
 260 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28400:115200"
 261 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
 262 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28800:115200"
 263 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
 264 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01f02800:115200"
 265 #else
 266 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h.
 267 #endif
 268 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */
 269
 270 /* GPIO */
 271 #define CONFIG_SUNXI_GPIO
 272
 273 #ifdef CONFIG_VIDEO_SUNXI
 274 /*
 275  * The amount of RAM to keep free at the top of RAM when relocating u-boot,
 276  * to use as framebuffer. This must be a multiple of 4096.
 277  */
 278 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20)
 279
 280 #define CONFIG_VIDEO_LOGO
 281 #define CONFIG_VIDEO_STD_TIMINGS
 282 #define CONFIG_I2C_EDID
 283 #define VIDEO_LINE_LEN (pGD->plnSizeX)
 284
 285 /* allow both serial and cfb console. */
 286 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
 287
 288 #endif /* CONFIG_VIDEO_SUNXI */
 289
 290 /* Ethernet support */
 291
 292 #ifdef CONFIG_SUN7I_GMAC
 293 #define CONFIG_PHY_REALTEK
 294 #endif
 295
 296 #ifdef CONFIG_USB_EHCI_HCD
 297 #define CONFIG_USB_OHCI_NEW
 298 #define CONFIG_USB_OHCI_SUNXI
 299 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
 300 #endif
 301
 302 #ifdef CONFIG_USB_KEYBOARD
 303 #define CONFIG_PREBOOT
 304 #endif
 305
 306 #ifndef CONFIG_SPL_BUILD
 307
 308 #ifdef CONFIG_ARM64
 309 /*
 310  * Boards seem to come with at least 512MB of DRAM.
 311  * The kernel should go at 512K, which is the default text offset (that will
 312  * be adjusted at runtime if needed).
 313  * There is no compression for arm64 kernels (yet), so leave some space
 314  * for really big kernels, say 256MB for now.
 315  * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
 316  * Align the initrd to a 2MB page.
 317  */
 318 #define BOOTM_SIZE      __stringify(0xa000000)
 319 #define KERNEL_ADDR_R   __stringify(SDRAM_OFFSET(0080000))
 320 #define FDT_ADDR_R      __stringify(SDRAM_OFFSET(FA00000))
 321 #define SCRIPT_ADDR_R   __stringify(SDRAM_OFFSET(FC00000))
 322 #define PXEFILE_ADDR_R  __stringify(SDRAM_OFFSET(FD00000))
 323 #define RAMDISK_ADDR_R  __stringify(SDRAM_OFFSET(FE00000))
 324
 325 #else
 326 /*
 327  * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
 328  * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
 329  * 1M script, 1M pxe and the ramdisk at the end.
 330  */
 331 #ifndef CONFIG_MACH_SUN8I_V3S
 332 #define BOOTM_SIZE     __stringify(0xa000000)
 333 #define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(2000000))
 334 #define FDT_ADDR_R     __stringify(SDRAM_OFFSET(3000000))
 335 #define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(3100000))
 336 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
 337 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000))
 338 #else
 339 /*
 340  * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
 341  * 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
 342  * 1M script, 1M pxe and the ramdisk at the end.
 343  */
 344 #define BOOTM_SIZE     __stringify(0x2e00000)
 345 #define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(1000000))
 346 #define FDT_ADDR_R     __stringify(SDRAM_OFFSET(1800000))
 347 #define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(1900000))
 348 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000))
 349 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000))
 350 #endif
 351 #endif
 352
 353 #define MEM_LAYOUT_ENV_SETTINGS \
 354         "bootm_size=" BOOTM_SIZE "\0" \
 355         "kernel_addr_r=" KERNEL_ADDR_R "\0" \
 356         "fdt_addr_r=" FDT_ADDR_R "\0" \
 357         "scriptaddr=" SCRIPT_ADDR_R "\0" \
 358         "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \
 359         "ramdisk_addr_r=" RAMDISK_ADDR_R "\0"
 360
 361 #define DFU_ALT_INFO_RAM \
 362         "dfu_alt_info_ram=" \
 363         "kernel ram " KERNEL_ADDR_R " 0x1000000;" \
 364         "fdt ram " FDT_ADDR_R " 0x100000;" \
 365         "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0"
 366
 367 #ifdef CONFIG_MMC
 368 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
 369 #define BOOTENV_DEV_MMC_AUTO(devtypeu, devtypel, instance)              \
 370         BOOTENV_DEV_MMC(MMC, mmc, 0)                                    \
 371         BOOTENV_DEV_MMC(MMC, mmc, 1)                                    \
 372         "bootcmd_mmc_auto="                                             \
 373                 "if test ${mmc_bootdev} -eq 1; then "                   \
 374                         "run bootcmd_mmc1; "                            \
 375                         "run bootcmd_mmc0; "                            \
 376                 "elif test ${mmc_bootdev} -eq 0; then "                 \
 377                         "run bootcmd_mmc0; "                            \
 378                         "run bootcmd_mmc1; "                            \
 379                 "fi\0"
 380
 381 #define BOOTENV_DEV_NAME_MMC_AUTO(devtypeu, devtypel, instance) \
 382         "mmc_auto "
 383
 384 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC_AUTO, mmc_auto, na)
 385 #else
 386 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
 387 #endif
 388 #else
 389 #define BOOT_TARGET_DEVICES_MMC(func)
 390 #endif
 391
 392 #ifdef CONFIG_AHCI
 393 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
 394 #else
 395 #define BOOT_TARGET_DEVICES_SCSI(func)
 396 #endif
 397
 398 #ifdef CONFIG_USB_STORAGE
 399 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
 400 #else
 401 #define BOOT_TARGET_DEVICES_USB(func)
 402 #endif
 403
 404 /* FEL boot support, auto-execute boot.scr if a script address was provided */
 405 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \
 406         "bootcmd_fel=" \
 407                 "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \
 408                         "echo '(FEL boot)'; " \
 409                         "source ${fel_scriptaddr}; " \
 410                 "fi\0"
 411 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \
 412         "fel "
 413
 414 #define BOOT_TARGET_DEVICES(func) \
 415         func(FEL, fel, na) \
 416         BOOT_TARGET_DEVICES_MMC(func) \
 417         BOOT_TARGET_DEVICES_SCSI(func) \
 418         BOOT_TARGET_DEVICES_USB(func) \
 419         func(PXE, pxe, na) \
 420         func(DHCP, dhcp, na)
 421
 422 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
 423 #define BOOTCMD_SUNXI_COMPAT \
 424         "bootcmd_sunxi_compat=" \
 425                 "setenv root /dev/mmcblk0p3 rootwait; " \
 426                 "if ext2load mmc 0 0x44000000 uEnv.txt; then " \
 427                         "echo Loaded environment from uEnv.txt; " \
 428                         "env import -t 0x44000000 ${filesize}; " \
 429                 "fi; " \
 430                 "setenv bootargs console=${console} root=${root} ${extraargs}; " \
 431                 "ext2load mmc 0 0x43000000 script.bin && " \
 432                 "ext2load mmc 0 0x48000000 uImage && " \
 433                 "bootm 0x48000000\0"
 434 #else
 435 #define BOOTCMD_SUNXI_COMPAT
 436 #endif
 437
 438 #include <config_distro_bootcmd.h>
 439
 440 #ifdef CONFIG_USB_KEYBOARD
 441 #define CONSOLE_STDIN_SETTINGS \
 442         "preboot=usb start\0" \
 443         "stdin=serial,usbkbd\0"
 444 #else
 445 #define CONSOLE_STDIN_SETTINGS \
 446         "stdin=serial\0"
 447 #endif
 448
 449 #ifdef CONFIG_VIDEO
 450 #define CONSOLE_STDOUT_SETTINGS \
 451         "stdout=serial,vga\0" \
 452         "stderr=serial,vga\0"
 453 #elif CONFIG_DM_VIDEO
 454 #define CONFIG_SYS_WHITE_ON_BLACK
 455 #define CONSOLE_STDOUT_SETTINGS \
 456         "stdout=serial,vidconsole\0" \
 457         "stderr=serial,vidconsole\0"
 458 #else
 459 #define CONSOLE_STDOUT_SETTINGS \
 460         "stdout=serial\0" \
 461         "stderr=serial\0"
 462 #endif
 463
 464 #ifdef CONFIG_MTDIDS_DEFAULT
 465 #define SUNXI_MTDIDS_DEFAULT \
 466         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0"
 467 #else
 468 #define SUNXI_MTDIDS_DEFAULT
 469 #endif
 470
 471 #ifdef CONFIG_MTDPARTS_DEFAULT
 472 #define SUNXI_MTDPARTS_DEFAULT \
 473         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
 474 #else
 475 #define SUNXI_MTDPARTS_DEFAULT
 476 #endif
 477
 478 #define PARTS_DEFAULT \
 479         "name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};" \
 480         "name=loader2,size=984k,uuid=${uuid_gpt_loader2};" \
 481         "name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};" \
 482         "name=system,size=-,uuid=${uuid_gpt_system};"
 483
 484 #define UUID_GPT_ESP "c12a7328-f81f-11d2-ba4b-00a0c93ec93b"
 485
 486 #ifdef CONFIG_ARM64
 487 #define UUID_GPT_SYSTEM "b921b045-1df0-41c3-af44-4c6f280d3fae"
 488 #else
 489 #define UUID_GPT_SYSTEM "69dad710-2ce4-4e3c-b16c-21a1d49abed3"
 490 #endif
 491
 492 #define CONSOLE_ENV_SETTINGS \
 493         CONSOLE_STDIN_SETTINGS \
 494         CONSOLE_STDOUT_SETTINGS
 495
 496 #ifdef CONFIG_ARM64
 497 #define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb"
 498 #else
 499 #define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb"
 500 #endif
 501
 502 #define CONFIG_EXTRA_ENV_SETTINGS \
 503         CONSOLE_ENV_SETTINGS \
 504         MEM_LAYOUT_ENV_SETTINGS \
 505         DFU_ALT_INFO_RAM \
 506         "fdtfile=" FDTFILE "\0" \
 507         "console=ttyS0,115200\0" \
 508         SUNXI_MTDIDS_DEFAULT \
 509         SUNXI_MTDPARTS_DEFAULT \
 510         "uuid_gpt_esp=" UUID_GPT_ESP "\0" \
 511         "uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \
 512         "partitions=" PARTS_DEFAULT "\0" \
 513         BOOTCMD_SUNXI_COMPAT \
 514         BOOTENV
 515
 516 #else /* ifndef CONFIG_SPL_BUILD */
 517 #define CONFIG_EXTRA_ENV_SETTINGS
 518 #endif
 519
 520 #endif /* _SUNXI_COMMON_CONFIG_H */