include/configs/sunxi-common.h

   1 /*
   2  * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
   3  *
   4  * (C) Copyright 2007-2011
   5  * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
   6  * Tom Cubie <tangliang@allwinnertech.com>
   7  *
   8  * Configuration settings for the Allwinner sunxi series of boards.
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef _SUNXI_COMMON_CONFIG_H
  14 #define _SUNXI_COMMON_CONFIG_H
  15
  16 #include <asm/arch/cpu.h>
  17 #include <linux/stringify.h>
  18
  19 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
  20 /*
  21  * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the
  22  * expense of restricting some features, so the regular machine id values can
  23  * be used.
  24  */
  25 # define CONFIG_MACH_TYPE_COMPAT_REV    0
  26 #else
  27 /*
  28  * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels.
  29  * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass
  30  * beyond the machine id check.
  31  */
  32 # define CONFIG_MACH_TYPE_COMPAT_REV    1
  33 #endif
  34
  35 #ifdef CONFIG_ARM64
  36 #define CONFIG_BUILD_TARGET "u-boot.itb"
  37 #define CONFIG_SYS_BOOTM_LEN            (32 << 20)
  38 #endif
  39
  40 /* Serial & console */
  41 #define CONFIG_SYS_NS16550_SERIAL
  42 /* ns16550 reg in the low bits of cpu reg */
  43 #define CONFIG_SYS_NS16550_CLK          24000000
  44 #ifndef CONFIG_DM_SERIAL
  45 # define CONFIG_SYS_NS16550_REG_SIZE    -4
  46 # define CONFIG_SYS_NS16550_COM1                SUNXI_UART0_BASE
  47 # define CONFIG_SYS_NS16550_COM2                SUNXI_UART1_BASE
  48 # define CONFIG_SYS_NS16550_COM3                SUNXI_UART2_BASE
  49 # define CONFIG_SYS_NS16550_COM4                SUNXI_UART3_BASE
  50 # define CONFIG_SYS_NS16550_COM5                SUNXI_R_UART_BASE
  51 #endif
  52
  53 /* CPU */
  54 #define COUNTER_FREQUENCY               24000000
  55
  56 /*
  57  * The DRAM Base differs between some models. We cannot use macros for the
  58  * CONFIG_FOO defines which contain the DRAM base address since they end
  59  * up unexpanded in include/autoconf.mk .
  60  *
  61  * So we have to have this #ifdef #else #endif block for these.
  62  */
  63 #ifdef CONFIG_MACH_SUN9I
  64 #define SDRAM_OFFSET(x) 0x2##x
  65 #define CONFIG_SYS_SDRAM_BASE           0x20000000
  66 #define CONFIG_SYS_LOAD_ADDR            0x22000000 /* default load address */
  67 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
  68  * since it needs to fit in with the other values. By also #defining it
  69  * we get warnings if the Kconfig value mismatches. */
  70 #define CONFIG_SPL_STACK_R_ADDR         0x2fe00000
  71 #define CONFIG_SPL_BSS_START_ADDR       0x2ff80000
  72 #else
  73 #define SDRAM_OFFSET(x) 0x4##x
  74 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  75 #define CONFIG_SYS_LOAD_ADDR            0x42000000 /* default load address */
  76 /* V3s do not have enough memory to place code at 0x4a000000 */
  77 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
  78  * since it needs to fit in with the other values. By also #defining it
  79  * we get warnings if the Kconfig value mismatches. */
  80 #define CONFIG_SPL_STACK_R_ADDR         0x4fe00000
  81 #define CONFIG_SPL_BSS_START_ADDR       0x4ff80000
  82 #endif
  83
  84 #define CONFIG_SPL_BSS_MAX_SIZE         0x00080000 /* 512 KiB */
  85
  86 #ifdef CONFIG_SUNXI_HIGH_SRAM
  87 /*
  88  * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
  89  * slightly bigger. Note that it is possible to map the first 32 KiB of the
  90  * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the
  91  * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and
  92  * the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
  93  */
  94 #define CONFIG_SYS_INIT_RAM_ADDR        0x10000
  95 #define CONFIG_SYS_INIT_RAM_SIZE        0x08000 /* FIXME: 40 KiB ? */
  96 #else
  97 #define CONFIG_SYS_INIT_RAM_ADDR        0x0
  98 #define CONFIG_SYS_INIT_RAM_SIZE        0x8000  /* 32 KiB */
  99 #endif
 100
 101 #define CONFIG_SYS_INIT_SP_OFFSET \
 102         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 103 #define CONFIG_SYS_INIT_SP_ADDR \
 104         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 105
 106 #define CONFIG_NR_DRAM_BANKS            1
 107 #define PHYS_SDRAM_0                    CONFIG_SYS_SDRAM_BASE
 108 #define PHYS_SDRAM_0_SIZE               0x80000000 /* 2 GiB */
 109
 110 #ifdef CONFIG_AHCI
 111 #define CONFIG_SCSI_AHCI_PLAT
 112 #define CONFIG_SUNXI_AHCI
 113 #define CONFIG_SYS_64BIT_LBA
 114 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     1
 115 #define CONFIG_SYS_SCSI_MAX_LUN         1
 116 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 117                                          CONFIG_SYS_SCSI_MAX_LUN)
 118 #endif
 119
 120 #define CONFIG_SETUP_MEMORY_TAGS
 121 #define CONFIG_CMDLINE_TAG
 122 #define CONFIG_INITRD_TAG
 123 #define CONFIG_SERIAL_TAG
 124
 125 #ifdef CONFIG_NAND_SUNXI
 126 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664
 127 #define CONFIG_SYS_NAND_ONFI_DETECTION
 128 #define CONFIG_SYS_MAX_NAND_DEVICE 8
 129
 130 #define CONFIG_MTD_DEVICE
 131 #define CONFIG_MTD_PARTITIONS
 132 #endif
 133
 134 #ifdef CONFIG_SPL_SPI_SUNXI
 135 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x8000
 136 #endif
 137
 138 /* mmc config */
 139 #ifdef CONFIG_MMC
 140 #define CONFIG_MMC_SUNXI_SLOT           0
 141 #endif
 142
 143 #if defined(CONFIG_ENV_IS_IN_MMC)
 144
 145 #ifdef CONFIG_ARM64
 146 /*
 147  * This is actually (CONFIG_ENV_OFFSET -
 148  * (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)), but the value will be used
 149  * directly in a makefile, without the preprocessor expansion.
 150  */
 151 #define CONFIG_BOARD_SIZE_LIMIT         0x7e000
 152 #endif
 153
 154 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
 155 /* If we have two devices (most likely eMMC + MMC), favour the eMMC */
 156 #define CONFIG_SYS_MMC_ENV_DEV          1
 157 #else
 158 /* Otherwise, use the only device we have */
 159 #define CONFIG_SYS_MMC_ENV_DEV          0
 160 #endif
 161 #define CONFIG_SYS_MMC_MAX_DEVICE       4
 162 #elif defined(CONFIG_ENV_IS_NOWHERE)
 163 #define CONFIG_ENV_SIZE                 (128 << 10)
 164 #endif
 165
 166 #ifndef CONFIG_MACH_SUN8I_V3S
 167 /* 64MB of malloc() pool */
 168 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (64 << 20))
 169 #else
 170 /* 2MB of malloc() pool */
 171 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (2 << 20))
 172 #endif
 173
 174 /*
 175  * Miscellaneous configurable options
 176  */
 177 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
 178 #define CONFIG_SYS_PBSIZE       1024    /* Print Buffer Size */
 179
 180 /* standalone support */
 181 #define CONFIG_STANDALONE_LOAD_ADDR     CONFIG_SYS_LOAD_ADDR
 182
 183 /* FLASH and environment organization */
 184
 185 #define CONFIG_SYS_MONITOR_LEN          (768 << 10)     /* 768 KiB */
 186
 187 #ifndef CONFIG_ARM64            /* AArch64 FEL support is not ready yet */
 188 #define CONFIG_SPL_BOARD_LOAD_IMAGE
 189 #endif
 190
 191 #ifdef CONFIG_SUNXI_HIGH_SRAM
 192 #define CONFIG_SPL_TEXT_BASE            0x10060         /* sram start+header */
 193 #define CONFIG_SPL_MAX_SIZE             0x7fa0          /* 32 KiB */
 194 #ifdef CONFIG_ARM64
 195 /* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */
 196 #define LOW_LEVEL_SRAM_STACK            0x00054000
 197 #else
 198 #define LOW_LEVEL_SRAM_STACK            0x00018000
 199 #endif /* !CONFIG_ARM64 */
 200 #else
 201 #define CONFIG_SPL_TEXT_BASE            0x60            /* sram start+header */
 202 #define CONFIG_SPL_MAX_SIZE             0x5fa0          /* 24KB on sun4i/sun7i */
 203 #define LOW_LEVEL_SRAM_STACK            0x00008000      /* End of sram */
 204 #endif
 205
 206 #define CONFIG_SPL_STACK                LOW_LEVEL_SRAM_STACK
 207
 208 #define CONFIG_SPL_PAD_TO               32768           /* decimal for 'dd' */
 209
 210
 211 /* I2C */
 212 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
 213     defined CONFIG_SY8106A_POWER
 214 #endif
 215
 216 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
 217     defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \
 218     defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE
 219 #define CONFIG_SYS_I2C_MVTWSI
 220 #ifndef CONFIG_DM_I2C
 221 #define CONFIG_SYS_I2C
 222 #define CONFIG_SYS_I2C_SPEED            400000
 223 #define CONFIG_SYS_I2C_SLAVE            0x7f
 224 #endif
 225 #endif
 226
 227 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
 228 #define CONFIG_SYS_I2C_SOFT
 229 #define CONFIG_SYS_I2C_SOFT_SPEED       50000
 230 #define CONFIG_SYS_I2C_SOFT_SLAVE       0x00
 231 /* We use pin names in Kconfig and sunxi_name_to_gpio() */
 232 #define CONFIG_SOFT_I2C_GPIO_SDA        soft_i2c_gpio_sda
 233 #define CONFIG_SOFT_I2C_GPIO_SCL        soft_i2c_gpio_scl
 234 #ifndef __ASSEMBLY__
 235 extern int soft_i2c_gpio_sda;
 236 extern int soft_i2c_gpio_scl;
 237 #endif
 238 #define CONFIG_VIDEO_LCD_I2C_BUS        0 /* The lcd panel soft i2c is bus 0 */
 239 #define CONFIG_SYS_SPD_BUS_NUM          1 /* And the axp209 i2c bus is bus 1 */
 240 #else
 241 #define CONFIG_SYS_SPD_BUS_NUM          0 /* The axp209 i2c bus is bus 0 */
 242 #define CONFIG_VIDEO_LCD_I2C_BUS        -1 /* NA, but necessary to compile */
 243 #endif
 244
 245 /* PMU */
 246 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
 247     defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \
 248     defined CONFIG_SY8106A_POWER
 249 #endif
 250
 251 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE
 252 #if CONFIG_CONS_INDEX == 1
 253 #ifdef CONFIG_MACH_SUN9I
 254 #define OF_STDOUT_PATH          "/soc/serial@07000000:115200"
 255 #else
 256 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28000:115200"
 257 #endif
 258 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
 259 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28400:115200"
 260 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
 261 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28800:115200"
 262 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
 263 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01f02800:115200"
 264 #else
 265 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h.
 266 #endif
 267 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */
 268
 269 /* GPIO */
 270 #define CONFIG_SUNXI_GPIO
 271
 272 #ifdef CONFIG_VIDEO_SUNXI
 273 /*
 274  * The amount of RAM to keep free at the top of RAM when relocating u-boot,
 275  * to use as framebuffer. This must be a multiple of 4096.
 276  */
 277 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20)
 278
 279 #define CONFIG_VIDEO_LOGO
 280 #define CONFIG_VIDEO_STD_TIMINGS
 281 #define CONFIG_I2C_EDID
 282 #define VIDEO_LINE_LEN (pGD->plnSizeX)
 283
 284 /* allow both serial and cfb console. */
 285 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
 286
 287 #endif /* CONFIG_VIDEO_SUNXI */
 288
 289 /* Ethernet support */
 290 #ifdef CONFIG_SUN4I_EMAC
 291 #define CONFIG_MII                      /* MII PHY management           */
 292 #endif
 293
 294 #ifdef CONFIG_SUN7I_GMAC
 295 #define CONFIG_MII                      /* MII PHY management           */
 296 #define CONFIG_PHY_REALTEK
 297 #endif
 298
 299 #ifdef CONFIG_USB_EHCI_HCD
 300 #define CONFIG_USB_OHCI_NEW
 301 #define CONFIG_USB_OHCI_SUNXI
 302 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
 303 #endif
 304
 305 #ifdef CONFIG_USB_FUNCTION_MASS_STORAGE
 306 #endif
 307
 308 #ifdef CONFIG_USB_KEYBOARD
 309 #define CONFIG_PREBOOT
 310 #endif
 311
 312 #define CONFIG_MISC_INIT_R
 313
 314 #ifndef CONFIG_SPL_BUILD
 315
 316 #ifdef CONFIG_ARM64
 317 /*
 318  * Boards seem to come with at least 512MB of DRAM.
 319  * The kernel should go at 512K, which is the default text offset (that will
 320  * be adjusted at runtime if needed).
 321  * There is no compression for arm64 kernels (yet), so leave some space
 322  * for really big kernels, say 256MB for now.
 323  * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
 324  * Align the initrd to a 2MB page.
 325  */
 326 #define BOOTM_SIZE      __stringify(0xa000000)
 327 #define KERNEL_ADDR_R   __stringify(SDRAM_OFFSET(0080000))
 328 #define FDT_ADDR_R      __stringify(SDRAM_OFFSET(FA00000))
 329 #define SCRIPT_ADDR_R   __stringify(SDRAM_OFFSET(FC00000))
 330 #define PXEFILE_ADDR_R  __stringify(SDRAM_OFFSET(FD00000))
 331 #define RAMDISK_ADDR_R  __stringify(SDRAM_OFFSET(FE00000))
 332
 333 #else
 334 /*
 335  * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
 336  * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
 337  * 1M script, 1M pxe and the ramdisk at the end.
 338  */
 339 #ifndef CONFIG_MACH_SUN8I_V3S
 340 #define BOOTM_SIZE     __stringify(0xa000000)
 341 #define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(2000000))
 342 #define FDT_ADDR_R     __stringify(SDRAM_OFFSET(3000000))
 343 #define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(3100000))
 344 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
 345 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000))
 346 #else
 347 /*
 348  * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
 349  * 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
 350  * 1M script, 1M pxe and the ramdisk at the end.
 351  */
 352 #define BOOTM_SIZE     __stringify(0x2e00000)
 353 #define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(1000000))
 354 #define FDT_ADDR_R     __stringify(SDRAM_OFFSET(1800000))
 355 #define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(1900000))
 356 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000))
 357 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000))
 358 #endif
 359 #endif
 360
 361 #define MEM_LAYOUT_ENV_SETTINGS \
 362         "bootm_size=" BOOTM_SIZE "\0" \
 363         "kernel_addr_r=" KERNEL_ADDR_R "\0" \
 364         "fdt_addr_r=" FDT_ADDR_R "\0" \
 365         "scriptaddr=" SCRIPT_ADDR_R "\0" \
 366         "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \
 367         "ramdisk_addr_r=" RAMDISK_ADDR_R "\0"
 368
 369 #define DFU_ALT_INFO_RAM \
 370         "dfu_alt_info_ram=" \
 371         "kernel ram " KERNEL_ADDR_R " 0x1000000;" \
 372         "fdt ram " FDT_ADDR_R " 0x100000;" \
 373         "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0"
 374
 375 #ifdef CONFIG_MMC
 376 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
 377 #define BOOTENV_DEV_MMC_AUTO(devtypeu, devtypel, instance)              \
 378         BOOTENV_DEV_MMC(MMC, mmc, 0)                                    \
 379         BOOTENV_DEV_MMC(MMC, mmc, 1)                                    \
 380         "bootcmd_mmc_auto="                                             \
 381                 "if test ${mmc_bootdev} -eq 1; then "                   \
 382                         "run bootcmd_mmc1; "                            \
 383                         "run bootcmd_mmc0; "                            \
 384                 "elif test ${mmc_bootdev} -eq 0; then "                 \
 385                         "run bootcmd_mmc0; "                            \
 386                         "run bootcmd_mmc1; "                            \
 387                 "fi\0"
 388
 389 #define BOOTENV_DEV_NAME_MMC_AUTO(devtypeu, devtypel, instance) \
 390         "mmc_auto "
 391
 392 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC_AUTO, mmc_auto, na)
 393 #else
 394 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
 395 #endif
 396 #else
 397 #define BOOT_TARGET_DEVICES_MMC(func)
 398 #endif
 399
 400 #ifdef CONFIG_AHCI
 401 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
 402 #else
 403 #define BOOT_TARGET_DEVICES_SCSI(func)
 404 #endif
 405
 406 #ifdef CONFIG_USB_STORAGE
 407 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
 408 #else
 409 #define BOOT_TARGET_DEVICES_USB(func)
 410 #endif
 411
 412 /* FEL boot support, auto-execute boot.scr if a script address was provided */
 413 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \
 414         "bootcmd_fel=" \
 415                 "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \
 416                         "echo '(FEL boot)'; " \
 417                         "source ${fel_scriptaddr}; " \
 418                 "fi\0"
 419 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \
 420         "fel "
 421
 422 #define BOOT_TARGET_DEVICES(func) \
 423         func(FEL, fel, na) \
 424         BOOT_TARGET_DEVICES_MMC(func) \
 425         BOOT_TARGET_DEVICES_SCSI(func) \
 426         BOOT_TARGET_DEVICES_USB(func) \
 427         func(PXE, pxe, na) \
 428         func(DHCP, dhcp, na)
 429
 430 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
 431 #define BOOTCMD_SUNXI_COMPAT \
 432         "bootcmd_sunxi_compat=" \
 433                 "setenv root /dev/mmcblk0p3 rootwait; " \
 434                 "if ext2load mmc 0 0x44000000 uEnv.txt; then " \
 435                         "echo Loaded environment from uEnv.txt; " \
 436                         "env import -t 0x44000000 ${filesize}; " \
 437                 "fi; " \
 438                 "setenv bootargs console=${console} root=${root} ${extraargs}; " \
 439                 "ext2load mmc 0 0x43000000 script.bin && " \
 440                 "ext2load mmc 0 0x48000000 uImage && " \
 441                 "bootm 0x48000000\0"
 442 #else
 443 #define BOOTCMD_SUNXI_COMPAT
 444 #endif
 445
 446 #include <config_distro_bootcmd.h>
 447
 448 #ifdef CONFIG_USB_KEYBOARD
 449 #define CONSOLE_STDIN_SETTINGS \
 450         "preboot=usb start\0" \
 451         "stdin=serial,usbkbd\0"
 452 #else
 453 #define CONSOLE_STDIN_SETTINGS \
 454         "stdin=serial\0"
 455 #endif
 456
 457 #ifdef CONFIG_VIDEO
 458 #define CONSOLE_STDOUT_SETTINGS \
 459         "stdout=serial,vga\0" \
 460         "stderr=serial,vga\0"
 461 #elif CONFIG_DM_VIDEO
 462 #define CONFIG_SYS_WHITE_ON_BLACK
 463 #define CONSOLE_STDOUT_SETTINGS \
 464         "stdout=serial,vidconsole\0" \
 465         "stderr=serial,vidconsole\0"
 466 #else
 467 #define CONSOLE_STDOUT_SETTINGS \
 468         "stdout=serial\0" \
 469         "stderr=serial\0"
 470 #endif
 471
 472 #ifdef CONFIG_MTDIDS_DEFAULT
 473 #define SUNXI_MTDIDS_DEFAULT \
 474         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0"
 475 #else
 476 #define SUNXI_MTDIDS_DEFAULT
 477 #endif
 478
 479 #ifdef CONFIG_MTDPARTS_DEFAULT
 480 #define SUNXI_MTDPARTS_DEFAULT \
 481         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
 482 #else
 483 #define SUNXI_MTDPARTS_DEFAULT
 484 #endif
 485
 486 #define PARTS_DEFAULT \
 487         "name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};" \
 488         "name=loader2,size=984k,uuid=${uuid_gpt_loader2};" \
 489         "name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};" \
 490         "name=system,size=-,uuid=${uuid_gpt_system};"
 491
 492 #define UUID_GPT_ESP "c12a7328-f81f-11d2-ba4b-00a0c93ec93b"
 493
 494 #ifdef CONFIG_ARM64
 495 #define UUID_GPT_SYSTEM "b921b045-1df0-41c3-af44-4c6f280d3fae"
 496 #else
 497 #define UUID_GPT_SYSTEM "69dad710-2ce4-4e3c-b16c-21a1d49abed3"
 498 #endif
 499
 500 #define CONSOLE_ENV_SETTINGS \
 501         CONSOLE_STDIN_SETTINGS \
 502         CONSOLE_STDOUT_SETTINGS
 503
 504 #ifdef CONFIG_ARM64
 505 #define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb"
 506 #else
 507 #define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb"
 508 #endif
 509
 510 #define CONFIG_EXTRA_ENV_SETTINGS \
 511         CONSOLE_ENV_SETTINGS \
 512         MEM_LAYOUT_ENV_SETTINGS \
 513         DFU_ALT_INFO_RAM \
 514         "fdtfile=" FDTFILE "\0" \
 515         "console=ttyS0,115200\0" \
 516         SUNXI_MTDIDS_DEFAULT \
 517         SUNXI_MTDPARTS_DEFAULT \
 518         "uuid_gpt_esp=" UUID_GPT_ESP "\0" \
 519         "uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \
 520         "partitions=" PARTS_DEFAULT "\0" \
 521         BOOTCMD_SUNXI_COMPAT \
 522         BOOTENV
 523
 524 #else /* ifndef CONFIG_SPL_BUILD */
 525 #define CONFIG_EXTRA_ENV_SETTINGS
 526 #endif
 527
 528 #endif /* _SUNXI_COMMON_CONFIG_H */