]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/suvd3.h
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx
[people/ms/u-boot.git] / include / configs / suvd3.h
1 /*
2 * Copyright (C) 2006 Freescale Semiconductor, Inc.
3 * Dave Liu <daveliu@freescale.com>
4 *
5 * Copyright (C) 2007 Logic Product Development, Inc.
6 * Peter Barada <peterb@logicpd.com>
7 *
8 * Copyright (C) 2007 MontaVista Software, Inc.
9 * Anton Vorontsov <avorontsov@ru.mvista.com>
10 *
11 * (C) Copyright 2010
12 * Heiko Schocher, DENX Software Engineering, hs@denx.de.
13 *
14 * This program is free software; you can redistribute it and/or
15 * modify it under the terms of the GNU General Public License as
16 * published by the Free Software Foundation; either version 2 of
17 * the License, or (at your option) any later version.
18 */
19
20 #ifndef __CONFIG_H
21 #define __CONFIG_H
22
23 /*
24 * High Level Configuration Options
25 */
26
27 /* This needs to be set prior to including km/km83xx-common.h */
28 #define CONFIG_SYS_TEXT_BASE 0xF0000000
29
30 #if defined(CONFIG_SUVD3) /* SUVD3 board specific */
31 #define CONFIG_HOSTNAME suvd3
32 #define CONFIG_KM_BOARD_NAME "suvd3"
33 /* include common defines/options for all 8321 Keymile boards */
34 #include "km/km8321-common.h"
35 #elif defined(CONFIG_KMVECT1) /* VECT1 board specific */
36 #define CONFIG_HOSTNAME kmvect1
37 #define CONFIG_KM_BOARD_NAME "kmvect1"
38 /* include common defines/options for all 8309 Keymile boards */
39 #include "km/km8309-common.h"
40 #else
41 #error Supported boards are: SUVD3, KMVECT1
42 #endif
43
44 #define CONFIG_SYS_APP1_BASE 0xA0000000
45 #define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */
46 #define CONFIG_SYS_APP2_BASE 0xB0000000
47 #define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */
48
49 /* EEprom support */
50 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
51
52 /*
53 * Init Local Bus Memory Controller:
54 *
55 * Bank Bus Machine PortSz Size Device
56 * ---- --- ------- ------ ----- ------
57 * 2 Local UPMA 16 bit 256MB APP1
58 * 3 Local GPCM 16 bit 256MB APP2
59 *
60 */
61
62 /*
63 * APP1 on the local bus CS2
64 */
65 #define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE
66 #define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB)
67
68 #define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \
69 BR_PS_16 | \
70 BR_MS_UPMA | \
71 BR_V)
72 #define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_APP1_SIZE))
73
74 #define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \
75 BR_PS_16 | \
76 BR_V)
77
78 #define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \
79 OR_GPCM_CSNT | \
80 OR_GPCM_ACS_DIV4 | \
81 OR_GPCM_SCY_3 | \
82 OR_GPCM_TRLX_SET)
83
84 #define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \
85 0x0000c000 | \
86 MxMR_WLFx_2X)
87
88 #define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE
89 #define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB)
90
91 /*
92 * MMU Setup
93 */
94
95
96 /* APP1: icache cacheable, but dcache-inhibit and guarded */
97 #define CONFIG_SYS_IBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \
98 BATL_MEMCOHERENCE)
99 #define CONFIG_SYS_IBAT5U (CONFIG_SYS_APP1_BASE | BATU_BL_256M | \
100 BATU_VS | BATU_VP)
101 #define CONFIG_SYS_DBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \
102 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
103 #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
104
105 #define CONFIG_SYS_IBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \
106 BATL_MEMCOHERENCE)
107 #define CONFIG_SYS_IBAT6U (CONFIG_SYS_APP2_BASE | BATU_BL_256M | \
108 BATU_VS | BATU_VP)
109 #define CONFIG_SYS_DBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \
110 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
111 #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
112
113 /*
114 * QE UEC ethernet configuration
115 */
116 #if defined(CONFIG_KMVECT1)
117 #define CONFIG_MV88E6352_SWITCH
118 #define CONFIG_KM_MVEXTSW_ADDR 0x10
119
120 /* ethernet port connected to simple switch 88e6122 (UEC0) */
121 #define CONFIG_UEC_ETH1
122 #define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */
123 #define CONFIG_SYS_UEC1_RX_CLK QE_CLK9
124 #define CONFIG_SYS_UEC1_TX_CLK QE_CLK10
125
126 #define CONFIG_FIXED_PHY 0xFFFFFFFF
127 #define CONFIG_SYS_FIXED_PHY_ADDR 0x1E /* unused address */
128 #define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \
129 {devnum, speed, duplex}
130 #define CONFIG_SYS_FIXED_PHY_PORTS \
131 CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL)
132
133 #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
134 #define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR
135 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
136 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
137
138 /* ethernet port connected to piggy (UEC2) */
139 #define CONFIG_HAS_ETH1
140 #define CONFIG_UEC_ETH2
141 #define CONFIG_SYS_UEC2_UCC_NUM 2 /* UCC3 */
142 #define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE /* not used in RMII Mode */
143 #define CONFIG_SYS_UEC2_TX_CLK QE_CLK12
144 #define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
145 #define CONFIG_SYS_UEC2_PHY_ADDR 0
146 #define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
147 #define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
148 #endif /* CONFIG_KMVECT1 */
149
150 #endif /* __CONFIG_H */