include/configs/suzaku.h

   1 /*
   2  * (C) Copyright 2004 Atmark Techno, Inc.
   3  *
   4  * Yasushi SHOJI <yashi@atmark-techno.com>
   5  *
   6  * See file CREDITS for list of people who contributed to this
   7  * project.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 of
  12  * the License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  22  * MA 02111-1307 USA
  23  */
  24
  25 #ifndef __CONFIG_H
  26 #define __CONFIG_H
  27
  28 /*
  29  * High Level Configuration Options
  30  * (easy to change)
  31  */
  32
  33 #define CONFIG_MICROBLAZE       1       /* This is an MicroBlaze CPU    */
  34 #define CONFIG_SUZAKU           1       /* on an SUZAKU Board           */
  35
  36 /*-----------------------------------------------------------------------
  37  * Start addresses for the final memory configuration
  38  * (Set up by the startup code)
  39  * Please note that CFG_SDRAM_BASE _must_ start at 0
  40  */
  41 #define CFG_SDRAM_BASE          0x80000000
  42 #define CFG_SDRAM_SIZE          0x01000000
  43 #define CFG_FLASH_BASE          0xfff00000
  44 #define CFG_FLASH_SIZE          0x00400000
  45 #define CFG_RESET_ADDRESS       0xfff00100
  46 #define CFG_MONITOR_LEN         (256 << 10)     /* Reserve 256 kB for Monitor */
  47 #define CFG_MONITOR_BASE        (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - (1024 * 1024))
  48 #define CFG_MALLOC_LEN          (256 << 10)     /* Reserve 256 kB for malloc */
  49
  50 #define CONFIG_BAUDRATE         115200
  51 #define CFG_BAUDRATE_TABLE      { 115200 }
  52
  53 #define CONFIG_COMMANDS         (CONFIG__CMD_DFL)
  54
  55 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
  56 #include <cmd_confdefs.h>
  57
  58 #define CFG_UART1_BASE          (0xFFFF2000)
  59 #define CONFIG_SERIAL_BASE      CFG_UART1_BASE
  60
  61 /*
  62  * Miscellaneous configurable options
  63  */
  64 #define CFG_LONGHELP                            /* undef to save memory         */
  65 #define CFG_PROMPT              "SUZAKU> "      /* Monitor Command Prompt       */
  66 #define CFG_CBSIZE              256
  67 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size      */
  68 #define CFG_MAXARGS             16              /* max number of command args   */
  69
  70 #define CFG_LOAD_ADDR           CFG_SDRAM_BASE  /* default load address         */
  71
  72 /*-----------------------------------------------------------------------
  73  * FLASH organization
  74  */
  75 #define CFG_MAX_FLASH_BANKS     1       /* max number of memory banks           */
  76 #define CFG_MAX_FLASH_SECT      1       /* max number of sectors on one chip    */
  77
  78 /*-----------------------------------------------------------------------
  79  * NVRAM organization
  80  */
  81 #define CFG_ENV_IS_NOWHERE      1
  82 #define CFG_ENV_SIZE            0x10000 /* Total Size of Environment Sector     */
  83 #define CFG_ENV_SECT_SIZE       0x10000 /* see README - env sector total size   */
  84
  85 /*-----------------------------------------------------------------------
  86  * Definitions for initial stack pointer and data area (in DPRAM)
  87  */
  88
  89 #define CFG_INIT_RAM_ADDR       0x80000000      /* inside of SDRAM */
  90 #define CFG_INIT_RAM_END        0x2000          /* End of used area in RAM */
  91 #define CFG_GBL_DATA_SIZE       128             /* size in bytes reserved for initial data */
  92 #define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
  93 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
  94
  95 #endif  /* __CONFIG_H */