include/configs/titanium.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2013 Stefan Roese <sr@denx.de>
   4  *
   5  * Configuration settings for the ProjectionDesign / Barco
   6  * Titanium board.
   7  *
   8  * Based on mx6qsabrelite.h which is:
   9  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #include "mx6_common.h"
  16
  17 #define CONFIG_MX6Q
  18
  19 /* Provide the MACH_TYPE value that the vendor kernel requires. */
  20 #define CONFIG_MACH_TYPE                3769
  21
  22 /* Size of malloc() pool */
  23 #define CONFIG_SYS_MALLOC_LEN           (2 * 1024 * 1024)
  24
  25 #define CONFIG_MXC_UART
  26 #define CONFIG_MXC_UART_BASE            UART1_BASE
  27
  28 /* I2C Configs */
  29 #define CONFIG_SYS_I2C
  30 #define CONFIG_SYS_I2C_MXC
  31 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  32 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  33 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  34 #define CONFIG_SYS_I2C_SPEED            100000
  35
  36 /* MMC Configs */
  37 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  38 #define CONFIG_SYS_FSL_USDHC_NUM        1
  39
  40 #define CONFIG_FEC_MXC
  41 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  42 #define CONFIG_FEC_XCV_TYPE             RGMII
  43 #define CONFIG_FEC_MXC_PHYADDR          4
  44
  45 /* USB Configs */
  46 #define CONFIG_MXC_USB_PORT     1
  47 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  48 #define CONFIG_MXC_USB_FLAGS    0
  49
  50 #define CONFIG_SYS_MEMTEST_START        0x10000000
  51 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + (500 << 20))
  52
  53 #define CONFIG_HOSTNAME                 "titanium"
  54 #define CONFIG_UBI_PART                 ubi
  55 #define CONFIG_UBIFS_VOLUME             rootfs0
  56
  57 #define CONFIG_EXTRA_ENV_SETTINGS \
  58         "kernel=" CONFIG_HOSTNAME "/uImage\0"           \
  59         "kernel_fs=/boot/uImage\0"                                      \
  60         "kernel_addr=11000000\0"                                        \
  61         "dtb=" CONFIG_HOSTNAME "/"                              \
  62                 CONFIG_HOSTNAME ".dtb\0"                        \
  63         "dtb_fs=/boot/" CONFIG_HOSTNAME ".dtb\0"                \
  64         "dtb_addr=12800000\0"                                           \
  65         "script=boot.scr\0" \
  66         "uimage=uImage\0" \
  67         "console=ttymxc0\0" \
  68         "baudrate=115200\0" \
  69         "fdt_high=0xffffffff\0"   \
  70         "initrd_high=0xffffffff\0" \
  71         "mmcdev=0\0" \
  72         "mmcpart=1\0" \
  73         "uimage=uImage\0" \
  74         "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
  75                 " ${script}\0" \
  76         "bootscript=echo Running bootscript from mmc ...; source\0" \
  77         "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
  78         "mmcroot=/dev/mmcblk0p2\0" \
  79         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  80                 "root=${mmcroot} rootwait rw\0" \
  81         "bootmmc=run mmcargs; fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
  82                 " ${uimage}; bootm\0" \
  83         "addip=setenv bootargs ${bootargs} "                            \
  84                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
  85                 ":${hostname}:${netdev}:off panic=1\0"                  \
  86         "addcon=setenv bootargs ${bootargs} console=ttymxc0,"           \
  87                 "${baudrate}\0"                                         \
  88         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
  89         "rootpath=/opt/eldk-5.3/armv7a/rootfs-minimal-mtdutils\0"       \
  90         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
  91                 "nfsroot=${serverip}:${rootpath}\0"                     \
  92         "ubifs=" CONFIG_HOSTNAME "/ubifs.img\0"         \
  93         "part=" __stringify(CONFIG_UBI_PART) "\0"                       \
  94         "boot_vol=0\0"                                                  \
  95         "vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0"                    \
  96         "load_ubifs=tftp ${kernel_addr} ${ubifs}\0"                     \
  97         "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
  98                 " ${filesize}\0"                                        \
  99         "upd_ubifs=run load_ubifs update_ubifs\0"                       \
 100         "init_ubi=nand erase.part ubi;ubi part ${part};"                \
 101                 "ubi create ${vol} c800000\0"                           \
 102         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0"                                    \
 103         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"                                \
 104         "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip"         \
 105                 " addcon addmtd;"                                       \
 106                 "bootm ${kernel_addr} - ${dtb_addr}\0"                  \
 107         "ubifsargs=set bootargs ubi.mtd=ubi "                           \
 108                 "root=ubi:rootfs${boot_vol} rootfstype=ubifs\0"         \
 109         "ubifs_mount=ubi part ubi;ubifsmount ubi:rootfs${boot_vol}\0"   \
 110         "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};"             \
 111                 "ubifsload ${dtb_addr} ${dtb_fs};\0"                    \
 112         "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \
 113                 "addmtd;bootm ${kernel_addr} - ${dtb_addr}\0"           \
 114         "load_kernel=tftp ${kernel_addr} ${kernel}\0"                   \
 115         "load_dtb=tftp ${dtb_addr} ${dtb}\0"                            \
 116         "net_nfs=run load_dtb load_kernel; "                            \
 117                 "run nfsargs addip addcon addmtd;"                      \
 118                 "bootm ${kernel_addr} - ${dtb_addr}\0"                  \
 119         "delenv=env default -a -f; saveenv; reset\0"
 120
 121 #define CONFIG_BOOTCOMMAND              "run nand_ubifs"
 122
 123 /* Physical Memory Map */
 124 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 125 #define PHYS_SDRAM_SIZE                 (512 << 20)
 126
 127 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 128 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 129 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 130
 131 #define CONFIG_SYS_INIT_SP_OFFSET \
 132         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 133 #define CONFIG_SYS_INIT_SP_ADDR \
 134         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 135
 136 /* Enable NAND support */
 137 #ifdef CONFIG_CMD_NAND
 138
 139 /* NAND stuff */
 140 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 141 #define CONFIG_SYS_NAND_BASE            0x40000000
 142 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 143 #define CONFIG_SYS_NAND_ONFI_DETECTION
 144
 145 /* DMA stuff, needed for GPMI/MXS NAND support */
 146
 147 /* Environment in NAND */
 148
 149 #else /* CONFIG_CMD_NAND */
 150
 151 /* Environment in MMC */
 152 #define CONFIG_SYS_MMC_ENV_DEV          0
 153
 154 #endif /* CONFIG_CMD_NAND */
 155
 156 /* UBI/UBIFS config options */
 157
 158 #endif                         /* __CONFIG_H */