include/configs/trats.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2011 Samsung Electronics
   4  * Heungjun Kim <riverful.kim@samsung.com>
   5  *
   6  * Configuation settings for the SAMSUNG TRATS (EXYNOS4210) board.
   7  */
   8
   9 #ifndef __CONFIG_TRATS_H
  10 #define __CONFIG_TRATS_H
  11
  12 #include <configs/exynos4-common.h>
  13
  14 #define CONFIG_TRATS
  15
  16 #define CONFIG_TIZEN                    /* TIZEN lib */
  17
  18 #define CONFIG_SYS_L2CACHE_OFF
  19 #ifndef CONFIG_SYS_L2CACHE_OFF
  20 #define CONFIG_SYS_L2_PL310
  21 #define CONFIG_SYS_PL310_BASE   0x10502000
  22 #endif
  23
  24 /* TRATS has 4 banks of DRAM */
  25 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  26 #define PHYS_SDRAM_1                    CONFIG_SYS_SDRAM_BASE
  27 #define SDRAM_BANK_SIZE                 (256 << 20)     /* 256 MB */
  28
  29 /* memtest works on */
  30 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x4800000)
  31
  32 /* select serial console configuration */
  33
  34 #define CONFIG_MACH_TYPE                MACH_TYPE_TRATS
  35
  36 #define CONFIG_BOOTCOMMAND              "run autoboot"
  37 #define CONFIG_DEFAULT_CONSOLE          "console=ttySAC2,115200n8\0"
  38
  39 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
  40                                         - GENERATED_GBL_DATA_SIZE)
  41
  42 #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20)       /* ram console */
  43
  44 #define CONFIG_SYS_MONITOR_BASE 0x00000000
  45
  46 #define CONFIG_BOOTBLOCK                "10"
  47 #define CONFIG_ENV_COMMON_BOOT          "${console} ${meminfo}"
  48
  49 #define CONFIG_SYS_MMC_ENV_DEV          CONFIG_MMC_DEFAULT_DEV
  50
  51 #define CONFIG_ENV_OVERWRITE
  52
  53 /* Tizen - partitions definitions */
  54 #define PARTS_CSA               "csa-mmc"
  55 #define PARTS_BOOT              "boot"
  56 #define PARTS_QBOOT             "qboot"
  57 #define PARTS_CSC               "csc"
  58 #define PARTS_ROOT              "platform"
  59 #define PARTS_DATA              "data"
  60 #define PARTS_UMS               "ums"
  61
  62 #define PARTS_DEFAULT \
  63         "uuid_disk=${uuid_gpt_disk};" \
  64         "name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
  65         "name="PARTS_BOOT",size=60MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
  66         "name="PARTS_QBOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_QBOOT"};" \
  67         "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
  68         "name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
  69         "name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
  70         "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
  71
  72 #define CONFIG_DFU_ALT \
  73         "u-boot raw 0x80 0x400;" \
  74         "/uImage ext4 0 2;" \
  75         "/modem.bin ext4 0 2;" \
  76         "/exynos4210-trats.dtb ext4 0 2;" \
  77         ""PARTS_CSA" part 0 1;" \
  78         ""PARTS_BOOT" part 0 2;" \
  79         ""PARTS_QBOOT" part 0 3;" \
  80         ""PARTS_CSC" part 0 4;" \
  81         ""PARTS_ROOT" part 0 5;" \
  82         ""PARTS_DATA" part 0 6;" \
  83         ""PARTS_UMS" part 0 7;" \
  84         "params.bin raw 0x38 0x8;" \
  85         "/Image.itb ext4 0 2\0"
  86
  87 #define CONFIG_EXTRA_ENV_SETTINGS \
  88         "bootk=" \
  89                 "run loaduimage;" \
  90                 "if run loaddtb; then " \
  91                         "bootm 0x40007FC0 - ${fdtaddr};" \
  92                 "fi;" \
  93                 "bootm 0x40007FC0;\0" \
  94         "updatebackup=" \
  95                 "mmc dev 0 2; mmc write 0 0x42100000 0 0x200;" \
  96                 "mmc dev 0 0\0" \
  97         "updatebootb=" \
  98                 "mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
  99         "lpj=lpj=3981312\0" \
 100         "nfsboot=" \
 101                 "setenv bootargs root=/dev/nfs rw " \
 102                 "nfsroot=${nfsroot},nolock,tcp " \
 103                 "ip=${ipaddr}:${serverip}:${gatewayip}:" \
 104                 "${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
 105                 "; run bootk\0" \
 106         "ramfsboot=" \
 107                 "setenv bootargs root=/dev/ram0 rw rootfstype=ext2 " \
 108                 "${console} ${meminfo} " \
 109                 "initrd=0x43000000,8M ramdisk=8192\0" \
 110         "mmcboot=" \
 111                 "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 112                 "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
 113                 "run bootk\0" \
 114         "bootchart=setenv opts init=/sbin/bootchartd; run bootcmd\0" \
 115         "boottrace=setenv opts initcall_debug; run bootcmd\0" \
 116         "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
 117         "verify=n\0" \
 118         "rootfstype=ext4\0" \
 119         "console=" CONFIG_DEFAULT_CONSOLE \
 120         "meminfo=crashkernel=32M@0x50000000\0" \
 121         "nfsroot=/nfsroot/arm\0" \
 122         "bootblock=" CONFIG_BOOTBLOCK "\0" \
 123         "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
 124         "loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
 125                 "${fdtfile}\0" \
 126         "mmcdev=0\0" \
 127         "mmcbootpart=2\0" \
 128         "mmcrootpart=5\0" \
 129         "opts=always_resume=1\0" \
 130         "partitions=" PARTS_DEFAULT \
 131         "dfu_alt_info=" CONFIG_DFU_ALT \
 132         "spladdr=0x40000100\0" \
 133         "splsize=0x200\0" \
 134         "splfile=falcon.bin\0" \
 135         "spl_export=" \
 136                    "setexpr spl_imgsize ${splsize} + 8 ;" \
 137                    "setenv spl_imgsize 0x${spl_imgsize};" \
 138                    "setexpr spl_imgaddr ${spladdr} - 8 ;" \
 139                    "setexpr spl_addr_tmp ${spladdr} - 4 ;" \
 140                    "mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \
 141                    "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 142                    "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \
 143                    "spl export atags 0x40007FC0;" \
 144                    "crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \
 145                    "mw.l ${spl_addr_tmp} ${splsize};" \
 146                    "ext4write mmc ${mmcdev}:${mmcbootpart}" \
 147                    " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
 148                    "setenv spl_imgsize;" \
 149                    "setenv spl_imgaddr;" \
 150                    "setenv spl_addr_tmp;\0" \
 151         CONFIG_EXTRA_ENV_ITB \
 152         "fdtaddr=40800000\0" \
 153
 154 /* Falcon mode definitions */
 155 #define CONFIG_SYS_SPL_ARGS_ADDR        CONFIG_SYS_SDRAM_BASE + 0x100
 156
 157 /* GPT */
 158
 159 /* Security subsystem - enable hw_rand() */
 160 #define CONFIG_EXYNOS_ACE_SHA
 161
 162 /* Common misc for Samsung */
 163 #define CONFIG_MISC_COMMON
 164
 165 /* Download menu - Samsung common */
 166 #define CONFIG_LCD_MENU
 167
 168 /* Download menu - definitions for check keys */
 169 #ifndef __ASSEMBLY__
 170
 171 #define KEY_PWR_PMIC_NAME               "MAX8997_PMIC"
 172 #define KEY_PWR_STATUS_REG              MAX8997_REG_STATUS1
 173 #define KEY_PWR_STATUS_MASK             (1 << 0)
 174 #define KEY_PWR_INTERRUPT_REG           MAX8997_REG_INT1
 175 #define KEY_PWR_INTERRUPT_MASK          (1 << 0)
 176
 177 #define KEY_VOL_UP_GPIO                 EXYNOS4_GPIO_X20
 178 #define KEY_VOL_DOWN_GPIO               EXYNOS4_GPIO_X21
 179 #endif /* __ASSEMBLY__ */
 180
 181 /* LCD console */
 182 #define LCD_BPP                 LCD_COLOR16
 183
 184 /* LCD */
 185 #define CONFIG_BMP_16BPP
 186 #define CONFIG_FB_ADDR          0x52504000
 187 #define CONFIG_EXYNOS_MIPI_DSIM
 188 #define CONFIG_VIDEO_BMP_GZIP
 189 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  ((500 * 160 * 4) + 54)
 190
 191 #endif  /* __CONFIG_H */