]>
git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/usbarmory.h
2 * USB armory MkI board configuration settings
3 * http://inversepath.com/usbarmory
5 * Copyright (C) 2015, Inverse Path
6 * Andrej Rosano <andrej@inversepath.com>
8 * SPDX-License-Identifier:|____GPL-2.0+
14 #define CONFIG_SYS_FSL_CLK
16 #include <asm/arch/imx-regs.h>
18 #include <config_distro_defaults.h>
20 /* U-Boot environment */
21 #define CONFIG_ENV_OFFSET (6 * 64 * 1024)
22 #define CONFIG_ENV_SIZE (8 * 1024)
23 #define CONFIG_SYS_MMC_ENV_DEV 0
25 /* U-Boot general configurations */
26 #define CONFIG_SYS_CBSIZE 512
29 #define CONFIG_MXC_UART
30 #define CONFIG_MXC_UART_BASE UART1_BASE
31 #define CONFIG_CONS_INDEX 1
34 #define CONFIG_FSL_ESDHC
35 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
36 #define CONFIG_SYS_FSL_ESDHC_NUM 1
39 #define CONFIG_USB_EHCI_MX5
40 #define CONFIG_MXC_USB_PORT 1
41 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
42 #define CONFIG_MXC_USB_FLAGS 0
45 #define CONFIG_SYS_I2C
46 #define CONFIG_SYS_I2C_MXC
47 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
48 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
51 #define CONFIG_FSL_IIM
53 /* U-Boot memory offsets */
54 #define CONFIG_LOADADDR 0x72000000
55 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
58 #define CONFIG_HOSTNAME usbarmory
59 #define CONFIG_BOOTCOMMAND \
60 "run distro_bootcmd; " \
61 "setenv bootargs console=${console} ${bootargs_default}; " \
62 "ext2load mmc 0:1 ${kernel_addr_r} /boot/zImage; " \
63 "ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; " \
64 "bootz ${kernel_addr_r} - ${fdt_addr_r}"
66 #define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0)
68 #include <config_distro_bootcmd.h>
70 #define MEM_LAYOUT_ENV_SETTINGS \
71 "kernel_addr_r=0x70800000\0" \
72 "fdt_addr_r=0x71000000\0" \
73 "scriptaddr=0x70800000\0" \
74 "pxefile_addr_r=0x70800000\0" \
75 "ramdisk_addr_r=0x73000000\0"
77 #define CONFIG_EXTRA_ENV_SETTINGS \
78 MEM_LAYOUT_ENV_SETTINGS \
79 "bootargs_default=root=/dev/mmcblk0p1 rootwait rw\0" \
80 "fdtfile=imx53-usbarmory.dtb\0" \
81 "console=ttymxc0,115200\0" \
84 #ifndef CONFIG_CMDLINE
85 #define USBARMORY_FIT_PATH "/boot/usbarmory.itb"
86 #define USBARMORY_FIT_ADDR "0x70800000"
89 /* Physical Memory Map */
90 #define CONFIG_NR_DRAM_BANKS 1
91 #define PHYS_SDRAM CSD0_BASE_ADDR
92 #define PHYS_SDRAM_SIZE (gd->ram_size)
94 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
95 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
96 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
98 #define CONFIG_SYS_INIT_SP_OFFSET \
99 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
100 #define CONFIG_SYS_INIT_SP_ADDR \
101 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
103 #define CONFIG_SYS_MEMTEST_START 0x70000000
104 #define CONFIG_SYS_MEMTEST_END 0x90000000
106 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
108 #endif /* __CONFIG_H */