]>
git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/vf610twr.h
2 * Copyright 2013 Freescale Semiconductor, Inc.
4 * Configuration settings for the Freescale Vybrid vf610twr board.
6 * SPDX-License-Identifier: GPL-2.0+
12 #define CONFIG_SYS_CACHELINE_SIZE 32
14 #include <asm/arch/imx-regs.h>
18 #define CONFIG_DISPLAY_CPUINFO
19 #define CONFIG_DISPLAY_BOARDINFO
20 #define CONFIG_SYS_FSL_CLK
22 #define CONFIG_MACH_TYPE 4146
24 #define CONFIG_SKIP_LOWLEVEL_INIT
26 /* Enable passing of ATAGs */
27 #define CONFIG_CMDLINE_TAG
29 #define CONFIG_CMD_FUSE
30 #ifdef CONFIG_CMD_FUSE
31 #define CONFIG_MXC_OCOTP
34 /* Size of malloc() pool */
35 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
37 #define CONFIG_BOARD_EARLY_INIT_F
39 /* Allow to overwrite serial and ethaddr */
40 #define CONFIG_ENV_OVERWRITE
41 #define CONFIG_BAUDRATE 115200
44 #define CONFIG_CMD_NAND
45 #define CONFIG_CMD_NAND_TRIMFFS
46 #define CONFIG_SYS_NAND_ONFI_DETECTION
48 #ifdef CONFIG_CMD_NAND
49 #define CONFIG_USE_ARCH_MEMCPY
50 #define CONFIG_SYS_MAX_NAND_DEVICE 1
51 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
54 #define CONFIG_CMD_UBI
55 #define CONFIG_CMD_UBIFS
59 /* Dynamic MTD partition support */
60 #define CONFIG_CMD_MTDPARTS
61 #define CONFIG_MTD_PARTITIONS
62 #define CONFIG_MTD_DEVICE
63 #define MTDIDS_DEFAULT "nand0=fsl_nfc"
64 #define MTDPARTS_DEFAULT "mtdparts=fsl_nfc:" \
74 #define CONFIG_FSL_ESDHC
75 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
76 #define CONFIG_SYS_FSL_ESDHC_NUM 1
78 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
80 #define CONFIG_GENERIC_MMC
81 #define CONFIG_DOS_PARTITION
83 #define CONFIG_FEC_MXC
85 #define IMX_FEC_BASE ENET_BASE_ADDR
86 #define CONFIG_FEC_XCV_TYPE RMII
87 #define CONFIG_FEC_MXC_PHYADDR 0
89 #define CONFIG_PHY_MICREL
93 #ifdef CONFIG_FSL_QSPI
94 #define FSL_QSPI_FLASH_SIZE (1 << 24)
95 #define FSL_QSPI_FLASH_NUM 2
96 #define CONFIG_SYS_FSL_QSPI_LE
100 #define CONFIG_SYS_I2C
101 #define CONFIG_SYS_I2C_MXC
102 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
103 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
104 #define CONFIG_SYS_SPD_BUS_NUM 0
106 #define CONFIG_BOOTDELAY 3
108 #define CONFIG_SYS_LOAD_ADDR 0x82000000
110 /* We boot from the gfxRAM area of the OCRAM. */
111 #define CONFIG_SYS_TEXT_BASE 0x3f408000
112 #define CONFIG_BOARD_SIZE_LIMIT 524288
115 * We do have 128MB of memory on the Vybrid Tower board. Leave the last
116 * 16MB alone to avoid conflicts with Cortex-M4 firmwares running from
117 * DDR3. Hence, limit the memory range for image processing to 112MB
118 * using bootm_size. All of the following must be within this range.
119 * We have the default load at 32MB into DDR (for the kernel), FDT at
120 * 64MB and the ramdisk 512KB above that (allowing for hopefully never
121 * seen large trees). This allows a reasonable split between ramdisk
122 * and kernel size, where the ram disk can be a bit larger.
124 #define MEM_LAYOUT_ENV_SETTINGS \
125 "bootm_size=0x07000000\0" \
126 "loadaddr=0x82000000\0" \
127 "kernel_addr_r=0x82000000\0" \
128 "fdt_addr=0x84000000\0" \
129 "fdt_addr_r=0x84000000\0" \
130 "rdaddr=0x84080000\0" \
131 "ramdisk_addr_r=0x84080000\0"
133 #define CONFIG_EXTRA_ENV_SETTINGS \
134 MEM_LAYOUT_ENV_SETTINGS \
135 "script=boot.scr\0" \
138 "fdt_file=vf610-twr.dtb\0" \
141 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
143 "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
144 "update_sd_firmware_filename=u-boot.imx\0" \
145 "update_sd_firmware=" \
146 "if test ${ip_dyn} = yes; then " \
147 "setenv get_cmd dhcp; " \
149 "setenv get_cmd tftp; " \
151 "if mmc dev ${mmcdev}; then " \
152 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
153 "setexpr fw_sz ${filesize} / 0x200; " \
154 "setexpr fw_sz ${fw_sz} + 1; " \
155 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
158 "mmcargs=setenv bootargs console=${console},${baudrate} " \
159 "root=${mmcroot}\0" \
161 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
162 "bootscript=echo Running bootscript from mmc ...; " \
164 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
165 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
166 "mmcboot=echo Booting from mmc ...; " \
168 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
169 "if run loadfdt; then " \
170 "bootz ${loadaddr} - ${fdt_addr}; " \
172 "if test ${boot_fdt} = try; then " \
175 "echo WARN: Cannot load the DT; " \
181 "netargs=setenv bootargs console=${console},${baudrate} " \
183 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
184 "netboot=echo Booting from net ...; " \
186 "if test ${ip_dyn} = yes; then " \
187 "setenv get_cmd dhcp; " \
189 "setenv get_cmd tftp; " \
191 "${get_cmd} ${image}; " \
192 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
193 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
194 "bootz ${loadaddr} - ${fdt_addr}; " \
196 "if test ${boot_fdt} = try; then " \
199 "echo WARN: Cannot load the DT; " \
206 #define CONFIG_BOOTCOMMAND \
207 "mmc dev ${mmcdev}; if mmc rescan; then " \
208 "if run loadbootscript; then " \
211 "if run loadimage; then " \
213 "else run netboot; " \
216 "else run netboot; fi"
218 /* Miscellaneous configurable options */
219 #define CONFIG_SYS_LONGHELP /* undef to save memory */
220 #undef CONFIG_AUTO_COMPLETE
221 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
222 #define CONFIG_SYS_PBSIZE \
223 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
224 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
225 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
227 #define CONFIG_SYS_MEMTEST_START 0x80010000
228 #define CONFIG_SYS_MEMTEST_END 0x87C00000
232 * The stack sizes are set up in start.S using the settings below
234 #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
236 /* Physical memory map */
237 #define CONFIG_NR_DRAM_BANKS 1
238 #define PHYS_SDRAM (0x80000000)
239 #define PHYS_SDRAM_SIZE (128 * 1024 * 1024)
241 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
242 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
243 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
245 #define CONFIG_SYS_INIT_SP_OFFSET \
246 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
247 #define CONFIG_SYS_INIT_SP_ADDR \
248 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
250 /* FLASH and environment organization */
251 #define CONFIG_SYS_NO_FLASH
253 #ifdef CONFIG_ENV_IS_IN_MMC
254 #define CONFIG_ENV_SIZE (8 * 1024)
256 #define CONFIG_ENV_OFFSET (12 * 64 * 1024)
257 #define CONFIG_SYS_MMC_ENV_DEV 0
260 #ifdef CONFIG_ENV_IS_IN_NAND
261 #define CONFIG_ENV_SIZE (64 * 2048)
262 #define CONFIG_ENV_SECT_SIZE (64 * 2048)
263 #define CONFIG_ENV_RANGE (512 * 1024)
264 #define CONFIG_ENV_OFFSET 0x180000