include/configs/walnut.h

   1 /*
   2  * (C) Copyright 2000-2005
   3  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * board/config.h - configuration options, board specific
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 /*
  32  * High Level Configuration Options
  33  * (easy to change)
  34  */
  35
  36 #define CONFIG_405GP            1       /* This is a PPC405 CPU         */
  37 #define CONFIG_4xx              1       /* ...member of PPC4xx family   */
  38 #define CONFIG_WALNUT           1       /* ...on a WALNUT board         */
  39                                         /* ...and on a SYCAMORE board   */
  40
  41 #define CONFIG_BOARD_EARLY_INIT_F 1     /* Call board_early_init_f      */
  42
  43 #define CONFIG_SYS_CLK_FREQ     33333333 /* external frequency to pll   */
  44
  45 #define CONFIG_PREBOOT  "echo;" \
  46         "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
  47         "echo"
  48
  49 #undef  CONFIG_BOOTARGS
  50
  51 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  52         "netdev=eth0\0"                                                 \
  53         "hostname=walnut\0"                                             \
  54         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
  55                 "nfsroot=${serverip}:${rootpath}\0"                     \
  56         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
  57         "addip=setenv bootargs ${bootargs} "                            \
  58                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
  59                 ":${hostname}:${netdev}:off panic=1\0"                  \
  60         "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
  61         "flash_nfs=run nfsargs addip addtty;"                           \
  62                 "bootm ${kernel_addr}\0"                                \
  63         "flash_self=run ramargs addip addtty;"                          \
  64                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
  65         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
  66                 "bootm\0"                                               \
  67         "rootpath=/opt/eldk/ppc_4xx\0"                                  \
  68         "bootfile=/tftpboot/walnut/uImage\0"                            \
  69         "kernel_addr=fff80000\0"                                        \
  70         "ramdisk_addr=fff80000\0"                                       \
  71         "load=tftp 100000 /tftpboot/walnut/u-boot.bin\0"                \
  72         "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;"   \
  73                 "cp.b 100000 fffc0000 40000;"                           \
  74                 "setenv filesize;saveenv\0"                             \
  75         "upd=run load;run update\0"                                     \
  76         ""
  77 #define CONFIG_BOOTCOMMAND      "run net_nfs"
  78
  79 #if 0
  80 #define CONFIG_BOOTDELAY        -1      /* autoboot disabled            */
  81 #else
  82 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
  83 #endif
  84
  85 #define CONFIG_BAUDRATE         115200
  86
  87 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
  88 #define CFG_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
  89
  90 #define CONFIG_MII              1       /* MII PHY management           */
  91 #define CONFIG_PHY_ADDR         1       /* PHY address                  */
  92
  93 #define CFG_RX_ETH_BUFFER       16      /* use 16 rx buffer on 405 emac */
  94
  95 #define CONFIG_NETCONSOLE               /* include NetConsole support   */
  96 #define CONFIG_NET_MULTI                /* needed for NetConsole        */
  97
  98 #define CONFIG_RTC_DS174x       1       /* use DS1743 RTC in Walnut     */
  99
 100 #define CONFIG_COMMANDS        (CONFIG_CMD_DFL  | \
 101                                 CFG_CMD_ASKENV  | \
 102                                 CFG_CMD_DATE    | \
 103                                 CFG_CMD_DHCP    | \
 104                                 CFG_CMD_DIAG    | \
 105                                 CFG_CMD_EEPROM  | \
 106                                 CFG_CMD_ELF     | \
 107                                 CFG_CMD_I2C     | \
 108                                 CFG_CMD_IRQ     | \
 109                                 CFG_CMD_MII     | \
 110                                 CFG_CMD_NET     | \
 111                                 CFG_CMD_NFS     | \
 112                                 CFG_CMD_PCI     | \
 113                                 CFG_CMD_PING    | \
 114                                 CFG_CMD_REGINFO | \
 115                                 CFG_CMD_SDRAM   | \
 116                                 CFG_CMD_SNTP    )
 117
 118 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 119 #include <cmd_confdefs.h>
 120
 121 #undef CONFIG_WATCHDOG                  /* watchdog disabled            */
 122
 123 #define CONFIG_SPD_EEPROM      1       /* use SPD EEPROM for setup    */
 124
 125 /*
 126  * Miscellaneous configurable options
 127  */
 128 #define CFG_LONGHELP                    /* undef to save memory         */
 129 #define CFG_PROMPT      "=> "           /* Monitor Command Prompt       */
 130 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 131 #define CFG_CBSIZE      1024            /* Console I/O Buffer Size      */
 132 #else
 133 #define CFG_CBSIZE      256             /* Console I/O Buffer Size      */
 134 #endif
 135 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 136 #define CFG_MAXARGS     16              /* max number of command args   */
 137 #define CFG_BARGSIZE    CFG_CBSIZE      /* Boot Argument Buffer Size    */
 138
 139 #define CFG_MEMTEST_START       0x0400000       /* memtest works on     */
 140 #define CFG_MEMTEST_END         0x0C00000       /* 4 ... 12 MB in DRAM  */
 141
 142 /*
 143  * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
 144  * If CFG_405_UART_ERRATA_59, then UART divisor is 31.
 145  * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value.
 146  * The Linux BASE_BAUD define should match this configuration.
 147  *    baseBaud = cpuClock/(uartDivisor*16)
 148  * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
 149  * set Linux BASE_BAUD to 403200.
 150  */
 151 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 152 #undef  CFG_EXT_SERIAL_CLOCK           /* external serial clock */
 153 #undef  CFG_405_UART_ERRATA_59         /* 405GP/CR Rev. D silicon */
 154 #define CFG_BASE_BAUD       691200
 155
 156 /* The following table includes the supported baudrates */
 157 #define CFG_BAUDRATE_TABLE  \
 158     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 159
 160 #define CFG_LOAD_ADDR           0x100000        /* default load address */
 161 #define CFG_EXTBDINFO           1       /* To use extended board_into (bd_t) */
 162
 163 #define CFG_HZ          1000            /* decrementer freq: 1 ms ticks */
 164
 165 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 166 #define CONFIG_LOOPW            1       /* enable loopw command         */
 167 #define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
 168 #define CONFIG_ZERO_BOOTDELAY_CHECK     /* check for keypress on bootdelay==0 */
 169 #define CONFIG_VERSION_VARIABLE 1       /* include version env variable */
 170
 171 /*-----------------------------------------------------------------------
 172  * I2C stuff
 173  *-----------------------------------------------------------------------
 174  */
 175 #define CONFIG_HARD_I2C         1       /* I2C with hardware support    */
 176 #undef  CONFIG_SOFT_I2C                 /* I2C bit-banged               */
 177 #define CFG_I2C_SPEED           400000  /* I2C speed and slave address  */
 178 #define CFG_I2C_SLAVE           0x7F
 179
 180 #define CFG_I2C_MULTI_EEPROMS
 181 #define CFG_I2C_EEPROM_ADDR     (0xa8>>1)
 182 #define CFG_I2C_EEPROM_ADDR_LEN 1
 183 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 184 #define CFG_EEPROM_PAGE_WRITE_BITS 3
 185 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
 186
 187 /*-----------------------------------------------------------------------
 188  * PCI stuff
 189  *-----------------------------------------------------------------------
 190  */
 191 #define PCI_HOST_ADAPTER 0              /* configure ar pci adapter     */
 192 #define PCI_HOST_FORCE  1               /* configure as pci host        */
 193 #define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
 194
 195 #define CONFIG_PCI                      /* include pci support          */
 196 #define CONFIG_PCI_HOST PCI_HOST_FORCE  /* select pci host function     */
 197 #define CONFIG_PCI_PNP                  /* do pci plug-and-play         */
 198                                         /* resource configuration       */
 199 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
 200
 201 #define CFG_PCI_SUBSYS_VENDORID 0x10e8  /* AMCC */
 202 #define CFG_PCI_SUBSYS_DEVICEID 0xcafe  /* Whatever */
 203 #define CFG_PCI_PTM1LA  0x00000000      /* point to sdram               */
 204 #define CFG_PCI_PTM1MS  0x80000001      /* 2GB, enable hard-wired to 1  */
 205 #define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
 206 #define CFG_PCI_PTM2LA  0x00000000      /* disabled                     */
 207 #define CFG_PCI_PTM2MS  0x00000000      /* disabled                     */
 208 #define CFG_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
 209
 210 /*-----------------------------------------------------------------------
 211  * Start addresses for the final memory configuration
 212  * (Set up by the startup code)
 213  * Please note that CFG_SDRAM_BASE _must_ start at 0
 214  */
 215 #define CFG_SDRAM_BASE          0x00000000
 216 #define CFG_FLASH_BASE          0xFFF80000
 217 #define CFG_MONITOR_LEN         (256 * 1024)    /* Reserve 256 kB for Monitor   */
 218 #define CFG_MALLOC_LEN          (128 * 1024)    /* Reserve 128 kB for malloc()  */
 219 #define CFG_MONITOR_BASE        (-CFG_MONITOR_LEN)
 220
 221 /*
 222  * Define here the location of the environment variables (FLASH or NVRAM).
 223  * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
 224  *       supported for backward compatibility.
 225  */
 226 #if 1
 227 #define CFG_ENV_IS_IN_FLASH     1       /* use FLASH for environment vars       */
 228 #else
 229 #define CFG_ENV_IS_IN_NVRAM     1       /* use NVRAM for environment vars       */
 230 #endif
 231
 232 /*
 233  * For booting Linux, the board info and command line data
 234  * have to be in the first 8 MB of memory, since this is
 235  * the maximum mapped by the Linux kernel during initialization.
 236  */
 237 #define CFG_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 238
 239 /*-----------------------------------------------------------------------
 240  * FLASH organization
 241  */
 242 #define FLASH_BASE0_PRELIM      CFG_FLASH_BASE  /* FLASH bank #0                */
 243 #define FLASH_BASE1_PRELIM      0               /* FLASH bank #1                */
 244
 245 #define CFG_MAX_FLASH_BANKS     1       /* max number of memory banks           */
 246 #define CFG_MAX_FLASH_SECT      256     /* max number of sectors on one chip    */
 247
 248 #define CFG_FLASH_ERASE_TOUT    120000  /* Timeout for Flash Erase (in ms)      */
 249 #define CFG_FLASH_WRITE_TOUT    500     /* Timeout for Flash Write (in ms)      */
 250
 251 #define CFG_FLASH_EMPTY_INFO            /* print 'E' for empty sector on flinfo */
 252
 253 #define CFG_FLASH_ADDR0         0x5555
 254 #define CFG_FLASH_ADDR1         0x2aaa
 255 #define CFG_FLASH_WORD_SIZE     unsigned char
 256
 257 #ifdef CFG_ENV_IS_IN_FLASH
 258 #define CFG_ENV_SECT_SIZE       0x10000         /* size of one complete sector  */
 259 #define CFG_ENV_ADDR            (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
 260 #define CFG_ENV_SIZE            0x4000  /* Total Size of Environment Sector     */
 261
 262 /* Address and size of Redundant Environment Sector     */
 263 #define CFG_ENV_ADDR_REDUND     (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
 264 #define CFG_ENV_SIZE_REDUND     (CFG_ENV_SIZE)
 265 #endif /* CFG_ENV_IS_IN_FLASH */
 266
 267 /*-----------------------------------------------------------------------
 268  * NVRAM organization
 269  */
 270 #define CFG_NVRAM_BASE_ADDR     0xf0000000      /* NVRAM base address   */
 271 #define CFG_NVRAM_SIZE          0x1ff8          /* NVRAM size   */
 272
 273 #ifdef CFG_ENV_IS_IN_NVRAM
 274 #define CFG_ENV_SIZE            0x1000          /* Size of Environment vars     */
 275 #define CFG_ENV_ADDR            \
 276         (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)       /* Env  */
 277 #endif
 278
 279 /*-----------------------------------------------------------------------
 280  * Cache Configuration
 281  */
 282 #define CFG_DCACHE_SIZE         16384   /* For AMCC 405 CPUs, older 405 ppc's   */
 283                                         /* have only 8kB, 16kB is save here     */
 284 #define CFG_CACHELINE_SIZE      32      /* ...                  */
 285 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 286 #define CFG_CACHELINE_SHIFT     5       /* log base 2 of the above value        */
 287 #endif
 288
 289 /*-----------------------------------------------------------------------
 290  * External Bus Controller (EBC) Setup
 291  */
 292
 293 /* Memory Bank 0 (Flash Bank 0) initialization                                  */
 294 #define CFG_EBC_PB0AP           0x9B015480
 295 #define CFG_EBC_PB0CR           0xFFF18000  /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit  */
 296
 297 #define CFG_EBC_PB1AP           0x02815480
 298 #define CFG_EBC_PB1CR           0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit  */
 299
 300 #define CFG_EBC_PB2AP           0x04815A80
 301 #define CFG_EBC_PB2CR           0xF0118000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit  */
 302
 303 #define CFG_EBC_PB3AP           0x01815280
 304 #define CFG_EBC_PB3CR           0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit  */
 305
 306 #define CFG_EBC_PB7AP           0x01815280
 307 #define CFG_EBC_PB7CR           0xF0318000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit  */
 308
 309 /*-----------------------------------------------------------------------
 310  * External peripheral base address
 311  *-----------------------------------------------------------------------
 312  */
 313 #define CFG_KEY_REG_BASE_ADDR   0xF0100000
 314 #define CFG_IR_REG_BASE_ADDR    0xF0200000
 315 #define CFG_FPGA_REG_BASE_ADDR  0xF0300000
 316
 317 /*-----------------------------------------------------------------------
 318  * Definitions for initial stack pointer and data area
 319  */
 320 #define CFG_INIT_DCACHE_CS      4       /* use cs # 4 for data cache memory    */
 321
 322 #define CFG_INIT_RAM_ADDR       0x40000000  /* inside of SDRAM                     */
 323 #define CFG_INIT_RAM_END        0x2000  /* End of used area in RAM             */
 324 #define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
 325 #define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 326 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
 327
 328 /*-----------------------------------------------------------------------
 329  * Definitions for Serial Presence Detect EEPROM address
 330  * (to get SDRAM settings)
 331  */
 332 #define SPD_EEPROM_ADDRESS      0x50
 333
 334 /*
 335  * Internal Definitions
 336  *
 337  * Boot Flags
 338  */
 339 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
 340 #define BOOTFLAG_WARM   0x02            /* Software reboot                      */
 341
 342 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 343 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 344 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 345 #endif
 346 #endif  /* __CONFIG_H */