include/configs/xilinx_zynqmp.h

   1 /*
   2  * Configuration for Xilinx ZynqMP
   3  * (C) Copyright 2014 - 2015 Xilinx, Inc.
   4  * Michal Simek <michal.simek@xilinx.com>
   5  *
   6  * Based on Configuration for Versatile Express
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __XILINX_ZYNQMP_H
  12 #define __XILINX_ZYNQMP_H
  13
  14 #define CONFIG_REMAKE_ELF
  15
  16 /* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
  17
  18 #define CONFIG_SYS_NO_FLASH
  19
  20
  21 /* Generic Interrupt Controller Definitions */
  22 #define CONFIG_GICV2
  23 #define GICD_BASE       0xF9010000
  24 #define GICC_BASE       0xF9020000
  25
  26 #define CONFIG_SYS_ALT_MEMTEST
  27 #define CONFIG_SYS_MEMTEST_SCRATCH      0xfffc0000
  28
  29 #ifndef CONFIG_NR_DRAM_BANKS
  30 # define CONFIG_NR_DRAM_BANKS           2
  31 #endif
  32 #define CONFIG_SYS_MEMTEST_START        0
  33 #define CONFIG_SYS_MEMTEST_END          1000
  34
  35 /* Have release address at the end of 256MB for now */
  36 #define CPU_RELEASE_ADDR        0xFFFFFF0
  37
  38 /* Cache Definitions */
  39 #define CONFIG_SYS_CACHELINE_SIZE       64
  40
  41 #if !defined(CONFIG_IDENT_STRING)
  42 # define CONFIG_IDENT_STRING            " Xilinx ZynqMP"
  43 #endif
  44
  45 #define CONFIG_SYS_INIT_SP_ADDR         CONFIG_SYS_TEXT_BASE
  46
  47 /* Flat Device Tree Definitions */
  48
  49 /* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
  50 #if !defined(COUNTER_FREQUENCY)
  51 # define COUNTER_FREQUENCY              100000000
  52 #endif
  53
  54 /* Size of malloc() pool */
  55 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 0x2000000)
  56
  57 /* Serial setup */
  58 #define CONFIG_ARM_DCC
  59 #define CONFIG_CPU_ARMV8
  60 #define CONFIG_ZYNQ_SERIAL
  61
  62 #define CONFIG_CONS_INDEX               0
  63 #define CONFIG_BAUDRATE                 115200
  64 #define CONFIG_SYS_BAUDRATE_TABLE \
  65         { 4800, 9600, 19200, 38400, 57600, 115200 }
  66
  67 /* Command line configuration */
  68 #define CONFIG_CMD_ENV
  69 #define CONFIG_CMD_EXT2
  70 #define CONFIG_CMD_EXT4
  71 #define CONFIG_CMD_FAT
  72 #define CONFIG_CMD_FS_GENERIC
  73 #define CONFIG_DOS_PARTITION
  74 #define CONFIG_EFI_PARTITION
  75 #define CONFIG_MP
  76
  77 #define CONFIG_CMD_MII
  78
  79 /* BOOTP options */
  80 #define CONFIG_BOOTP_BOOTFILESIZE
  81 #define CONFIG_BOOTP_BOOTPATH
  82 #define CONFIG_BOOTP_GATEWAY
  83 #define CONFIG_BOOTP_HOSTNAME
  84 #define CONFIG_BOOTP_MAY_FAIL
  85 #define CONFIG_BOOTP_SERVERIP
  86
  87 /* SPI */
  88 #ifdef CONFIG_ZYNQ_SPI
  89 # define CONFIG_CMD_SF
  90 #endif
  91
  92 #if defined(CONFIG_ZYNQ_SDHCI)
  93 # define CONFIG_MMC
  94 # define CONFIG_GENERIC_MMC
  95 # define CONFIG_SDHCI
  96 # define CONFIG_CMD_MMC
  97 # ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
  98 #  define CONFIG_ZYNQ_SDHCI_MAX_FREQ    200000000
  99 # endif
 100 #endif
 101
 102 #if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQMP_USB)
 103 # define CONFIG_FAT_WRITE
 104 # define CONFIG_CMD_EXT4_WRITE
 105 #endif
 106
 107 #ifdef CONFIG_NAND_ARASAN
 108 # define CONFIG_CMD_NAND
 109 # define CONFIG_CMD_NAND_LOCK_UNLOCK
 110 # define CONFIG_SYS_MAX_NAND_DEVICE     1
 111 # define CONFIG_SYS_NAND_SELF_INIT
 112 # define CONFIG_SYS_NAND_ONFI_DETECTION
 113 # define CONFIG_MTD_DEVICE
 114 #endif
 115
 116 /* Miscellaneous configurable options */
 117 #define CONFIG_SYS_LOAD_ADDR            0x8000000
 118
 119 #if defined(CONFIG_ZYNQMP_USB)
 120 #define CONFIG_USB_XHCI_DWC3
 121 #define CONFIG_USB_XHCI
 122 #define CONFIG_USB_MAX_CONTROLLER_COUNT         1
 123 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
 124 #define CONFIG_CMD_USB
 125 #define CONFIG_USB_STORAGE
 126 #define CONFIG_USB_XHCI_ZYNQMP
 127
 128 #define CONFIG_USB_DWC3
 129 #define CONFIG_USB_DWC3_GADGET
 130
 131 #define CONFIG_USB_GADGET_DOWNLOAD
 132 #define CONFIG_USB_GADGET_DUALSPEED
 133 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 134 #define CONFIG_USBDOWNLOAD_GADGET
 135 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    0x1800000
 136 #define DFU_DEFAULT_POLL_TIMEOUT        300
 137 #define CONFIG_USB_FUNCTION_DFU
 138 #define CONFIG_DFU_RAM
 139 #define CONFIG_G_DNL_VENDOR_NUM         0x03FD
 140 #define CONFIG_G_DNL_PRODUCT_NUM        0x0300
 141 #define CONFIG_G_DNL_MANUFACTURER       "Xilinx"
 142 #define CONFIG_USB_CABLE_CHECK
 143 #define CONFIG_CMD_DFU
 144 #define CONFIG_CMD_THOR_DOWNLOAD
 145 #define CONFIG_USB_FUNCTION_THOR
 146 #define CONFIG_THOR_RESET_OFF
 147 #define DFU_ALT_INFO_RAM \
 148         "dfu_ram_info=" \
 149         "setenv dfu_alt_info " \
 150         "Image ram $kernel_addr $kernel_size\\\\;" \
 151         "system.dtb ram $fdt_addr $fdt_size\0" \
 152         "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
 153         "thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
 154
 155 #define DFU_ALT_INFO  \
 156                 DFU_ALT_INFO_RAM
 157 #endif
 158
 159 #if !defined(DFU_ALT_INFO)
 160 # define DFU_ALT_INFO
 161 #endif
 162
 163 /* Initial environment variables */
 164 #define CONFIG_EXTRA_ENV_SETTINGS \
 165         "kernel_addr=0x80000\0" \
 166         "fdt_addr=0x7000000\0" \
 167         "fdt_high=0x10000000\0" \
 168         "kernel_size=0x2000000\0" \
 169         "fdt_size=0x80000\0" \
 170         "sdbootdev=0\0"\
 171         "sdboot=mmc dev $sdbootdev && mmcinfo && load mmc $sdbootdev:$partid $fdt_addr system.dtb && " \
 172                 "load mmc $sdbootdev:$partid $kernel_addr Image && " \
 173                 "booti $kernel_addr - $fdt_addr\0" \
 174         DFU_ALT_INFO
 175
 176 #define CONFIG_PREBOOT          "run bootargs"
 177 #define CONFIG_BOOTCOMMAND      "run $modeboot"
 178 #define CONFIG_BOOTDELAY        3
 179
 180 #define CONFIG_BOARD_LATE_INIT
 181
 182 /* Do not preserve environment */
 183 #define CONFIG_ENV_IS_NOWHERE           1
 184 #define CONFIG_ENV_SIZE                 0x1000
 185
 186 /* Monitor Command Prompt */
 187 /* Console I/O Buffer Size */
 188 #define CONFIG_SYS_CBSIZE               2048
 189 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 190                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 191 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 192 #define CONFIG_SYS_LONGHELP
 193 #define CONFIG_CMDLINE_EDITING
 194 #define CONFIG_SYS_MAXARGS              64
 195
 196 /* Ethernet driver */
 197 #if defined(CONFIG_ZYNQ_GEM)
 198 # define CONFIG_NET_MULTI
 199 # define CONFIG_MII
 200 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 201 # define CONFIG_PHY_MARVELL
 202 # define CONFIG_PHY_NATSEMI
 203 # define CONFIG_PHY_TI
 204 # define CONFIG_PHY_GIGE
 205 # define PHY_ANEG_TIMEOUT       20000
 206 #endif
 207
 208 /* I2C */
 209 #if defined(CONFIG_SYS_I2C_ZYNQ)
 210 # define CONFIG_CMD_I2C
 211 # define CONFIG_SYS_I2C
 212 # define CONFIG_SYS_I2C_ZYNQ_SPEED              100000
 213 # define CONFIG_SYS_I2C_ZYNQ_SLAVE              0
 214 #endif
 215
 216 /* EEPROM */
 217 #ifdef CONFIG_ZYNQMP_EEPROM
 218 # define CONFIG_CMD_EEPROM
 219 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         2
 220 # define CONFIG_SYS_I2C_EEPROM_ADDR             0x54
 221 # define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4
 222 # define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
 223 # define CONFIG_SYS_EEPROM_SIZE                 (64 * 1024)
 224 #endif
 225
 226 #ifdef CONFIG_AHCI
 227 #define CONFIG_LIBATA
 228 #define CONFIG_SCSI_AHCI
 229 #define CONFIG_SCSI_AHCI_PLAT
 230 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     2
 231 #define CONFIG_SYS_SCSI_MAX_LUN         1
 232 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 233                                          CONFIG_SYS_SCSI_MAX_LUN)
 234 #define CONFIG_CMD_SCSI
 235 #endif
 236
 237 #define CONFIG_SYS_BOOTM_LEN    (60 * 1024 * 1024)
 238
 239 #define CONFIG_CMD_BOOTI
 240 #define CONFIG_CMD_UNZIP
 241
 242 #define CONFIG_BOARD_EARLY_INIT_R
 243 #define CONFIG_CLOCKS
 244
 245 #endif /* __XILINX_ZYNQMP_H */