include/configs/xilinx_zynqmp.h

   1 /*
   2  * Configuration for Xilinx ZynqMP
   3  * (C) Copyright 2014 - 2015 Xilinx, Inc.
   4  * Michal Simek <michal.simek@xilinx.com>
   5  *
   6  * Based on Configuration for Versatile Express
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __XILINX_ZYNQMP_H
  12 #define __XILINX_ZYNQMP_H
  13
  14 #define CONFIG_REMAKE_ELF
  15
  16 /* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
  17
  18 #define CONFIG_SYS_NO_FLASH
  19
  20
  21 /* Generic Interrupt Controller Definitions */
  22 #define CONFIG_GICV2
  23 #define GICD_BASE       0xF9010000
  24 #define GICC_BASE       0xF9020000
  25
  26 #define CONFIG_SYS_ALT_MEMTEST
  27 #define CONFIG_SYS_MEMTEST_SCRATCH      0xfffc0000
  28
  29 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  30 #define CONFIG_SYS_MEMTEST_END          CONFIG_SYS_SDRAM_SIZE
  31
  32 /* Have release address at the end of 256MB for now */
  33 #define CPU_RELEASE_ADDR        0xFFFFFF0
  34
  35 /* Cache Definitions */
  36 #define CONFIG_SYS_CACHELINE_SIZE       64
  37
  38 #if !defined(CONFIG_IDENT_STRING)
  39 # define CONFIG_IDENT_STRING            " Xilinx ZynqMP"
  40 #endif
  41
  42 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
  43
  44 /* Flat Device Tree Definitions */
  45 #define CONFIG_OF_LIBFDT
  46
  47 /* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
  48 #if !defined(COUNTER_FREQUENCY)
  49 # define COUNTER_FREQUENCY              100000000
  50 #endif
  51
  52 /* Size of malloc() pool */
  53 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 0x2000000)
  54
  55 /* Serial setup */
  56 #if defined(CONFIG_ZYNQMP_DCC)
  57 # define CONFIG_ARM_DCC
  58 # define CONFIG_CPU_ARMV8
  59 #else
  60 # define CONFIG_ZYNQ_SERIAL
  61 #endif
  62
  63 #define CONFIG_CONS_INDEX               0
  64 #define CONFIG_BAUDRATE                 115200
  65 #define CONFIG_SYS_BAUDRATE_TABLE \
  66         { 4800, 9600, 19200, 38400, 57600, 115200 }
  67
  68 /* Command line configuration */
  69 #define CONFIG_CMD_ENV
  70 #define CONFIG_CMD_EXT2
  71 #define CONFIG_CMD_EXT4
  72 #define CONFIG_CMD_FAT
  73 #define CONFIG_CMD_FS_GENERIC
  74 #define CONFIG_DOS_PARTITION
  75 #define CONFIG_MP
  76
  77 #define CONFIG_CMD_MII
  78
  79 /* BOOTP options */
  80 #define CONFIG_BOOTP_BOOTFILESIZE
  81 #define CONFIG_BOOTP_BOOTPATH
  82 #define CONFIG_BOOTP_GATEWAY
  83 #define CONFIG_BOOTP_HOSTNAME
  84 #define CONFIG_BOOTP_MAY_FAIL
  85 #define CONFIG_BOOTP_SERVERIP
  86
  87 /* SPI */
  88 #ifdef CONFIG_ZYNQ_SPI
  89 # define CONFIG_CMD_SF
  90 #endif
  91
  92 #if defined(CONFIG_ZYNQ_SDHCI)
  93 # define CONFIG_MMC
  94 # define CONFIG_GENERIC_MMC
  95 # define CONFIG_SDHCI
  96 # define CONFIG_CMD_MMC
  97 # ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
  98 #  define CONFIG_ZYNQ_SDHCI_MAX_FREQ    200000000
  99 # endif
 100 # define CONFIG_FAT_WRITE
 101 # define CONFIG_CMD_EXT4_WRITE
 102 #endif
 103
 104 #ifdef CONFIG_NAND_ARASAN
 105 # define CONFIG_CMD_NAND
 106 # define CONFIG_CMD_NAND_LOCK_UNLOCK
 107 # define CONFIG_SYS_MAX_NAND_DEVICE     1
 108 # define CONFIG_SYS_NAND_SELF_INIT
 109 # define CONFIG_SYS_NAND_ONFI_DETECTION
 110 # define CONFIG_MTD_DEVICE
 111 #endif
 112
 113 /* Miscellaneous configurable options */
 114 #define CONFIG_SYS_LOAD_ADDR            0x8000000
 115
 116 #if defined(CONFIG_ZYNQMP_USB)
 117 #define CONFIG_USB_XHCI_DWC3
 118 #define CONFIG_USB_XHCI
 119 #define CONFIG_USB_MAX_CONTROLLER_COUNT         1
 120 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
 121 #define CONFIG_CMD_USB
 122 #define CONFIG_USB_STORAGE
 123 #define CONFIG_USB_XHCI_ZYNQMP
 124
 125 #define CONFIG_USB_DWC3
 126 #define CONFIG_USB_DWC3_GADGET
 127
 128 #define CONFIG_USB_GADGET
 129 #define CONFIG_USB_GADGET_DOWNLOAD
 130 #define CONFIG_USB_GADGET_DUALSPEED
 131 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 132 #define CONFIG_USBDOWNLOAD_GADGET
 133 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    0x1800000
 134 #define DFU_DEFAULT_POLL_TIMEOUT        300
 135 #define CONFIG_USB_FUNCTION_DFU
 136 #define CONFIG_DFU_RAM
 137 #define CONFIG_G_DNL_VENDOR_NUM         0x03FD
 138 #define CONFIG_G_DNL_PRODUCT_NUM        0x0300
 139 #define CONFIG_G_DNL_MANUFACTURER       "Xilinx"
 140 #define CONFIG_USB_CABLE_CHECK
 141 #define CONFIG_CMD_DFU
 142 #define CONFIG_CMD_THOR_DOWNLOAD
 143 #define CONFIG_USB_FUNCTION_THOR
 144 #define CONFIG_THOR_RESET_OFF
 145 #define DFU_ALT_INFO_RAM \
 146         "dfu_ram_info=" \
 147         "setenv dfu_alt_info " \
 148         "Image ram $kernel_addr $kernel_size\\\\;" \
 149         "system.dtb ram $fdt_addr $fdt_size\0" \
 150         "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
 151         "thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
 152
 153 #define DFU_ALT_INFO  \
 154                 DFU_ALT_INFO_RAM
 155 #endif
 156
 157 #if !defined(DFU_ALT_INFO)
 158 # define DFU_ALT_INFO
 159 #endif
 160
 161 /* Initial environment variables */
 162 #define CONFIG_EXTRA_ENV_SETTINGS \
 163         "kernel_addr=0x80000\0" \
 164         "fdt_addr=0x7000000\0" \
 165         "fdt_high=0x10000000\0" \
 166         "kernel_size=0x2000000\0" \
 167         "fdt_size=0x80000\0" \
 168         "sdbootdev=0\0"\
 169         "sdboot=mmc dev $sdbootdev && mmcinfo && load mmc $sdbootdev:$partid $fdt_addr system.dtb && " \
 170                 "load mmc $sdbootdev:$partid $kernel_addr Image && " \
 171                 "booti $kernel_addr - $fdt_addr\0" \
 172         DFU_ALT_INFO
 173
 174 #define CONFIG_PREBOOT          "run bootargs"
 175 #define CONFIG_BOOTCOMMAND      "run $modeboot"
 176 #define CONFIG_BOOTDELAY        5
 177
 178 #define CONFIG_BOARD_LATE_INIT
 179
 180 /* Do not preserve environment */
 181 #define CONFIG_ENV_IS_NOWHERE           1
 182 #define CONFIG_ENV_SIZE                 0x1000
 183
 184 /* Monitor Command Prompt */
 185 /* Console I/O Buffer Size */
 186 #define CONFIG_SYS_CBSIZE               2048
 187 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 188                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 189 #define CONFIG_SYS_HUSH_PARSER
 190 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 191 #define CONFIG_SYS_LONGHELP
 192 #define CONFIG_CMDLINE_EDITING
 193 #define CONFIG_SYS_MAXARGS              64
 194
 195 /* Ethernet driver */
 196 #if defined(CONFIG_ZYNQ_GEM)
 197 # define CONFIG_NET_MULTI
 198 # define CONFIG_MII
 199 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 200 # define CONFIG_PHY_MARVELL
 201 # define CONFIG_PHY_NATSEMI
 202 # define CONFIG_PHY_TI
 203 # define CONFIG_PHY_GIGE
 204 # define PHY_ANEG_TIMEOUT       20000
 205 #endif
 206
 207 /* I2C */
 208 #if defined(CONFIG_SYS_I2C_ZYNQ)
 209 # define CONFIG_CMD_I2C
 210 # define CONFIG_SYS_I2C
 211 # define CONFIG_SYS_I2C_ZYNQ_SPEED              100000
 212 # define CONFIG_SYS_I2C_ZYNQ_SLAVE              0
 213 #endif
 214
 215 /* EEPROM */
 216 #ifdef CONFIG_ZYNQMP_EEPROM
 217 # define CONFIG_CMD_EEPROM
 218 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         2
 219 # define CONFIG_SYS_I2C_EEPROM_ADDR             0x54
 220 # define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4
 221 # define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
 222 # define CONFIG_SYS_EEPROM_SIZE                 (64 * 1024)
 223 #endif
 224
 225 #ifdef CONFIG_AHCI
 226 #define CONFIG_LIBATA
 227 #define CONFIG_SCSI_AHCI
 228 #define CONFIG_SCSI_AHCI_PLAT
 229 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     1
 230 #define CONFIG_SYS_SCSI_MAX_LUN         1
 231 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 232                                          CONFIG_SYS_SCSI_MAX_LUN)
 233 #define CONFIG_CMD_SCSI
 234 #endif
 235
 236 #define CONFIG_SYS_BOOTM_LEN    (60 * 1024 * 1024)
 237
 238 #define CONFIG_CMD_BOOTI
 239 #define CONFIG_CMD_UNZIP
 240
 241 #define CONFIG_BOARD_EARLY_INIT_R
 242 #define CONFIG_CLOCKS
 243
 244 #endif /* __XILINX_ZYNQMP_H */