]> git.ipfire.org Git - thirdparty/u-boot.git/blob - include/i2s.h
configs: ls1046a: Move SPI_FLASH_SPANSION to defconfig
[thirdparty/u-boot.git] / include / i2s.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3 * Copyright (C) 2012 Samsung Electronics
4 * R. Chandrasekar <rcsekar@samsung.com>
5 */
6
7 #ifndef __I2S_H__
8 #define __I2S_H__
9
10 /*
11 * DAI hardware audio formats.
12 *
13 * Describes the physical PCM data formating and clocking. Add new formats
14 * to the end.
15 */
16 #define SND_SOC_DAIFMT_I2S 1 /* I2S mode */
17 #define SND_SOC_DAIFMT_RIGHT_J 2 /* Right Justified mode */
18 #define SND_SOC_DAIFMT_LEFT_J 3 /* Left Justified mode */
19 #define SND_SOC_DAIFMT_DSP_A 4 /* L data MSB after FRM LRC */
20 #define SND_SOC_DAIFMT_DSP_B 5 /* L data MSB during FRM LRC */
21 #define SND_SOC_DAIFMT_AC97 6 /* AC97 */
22 #define SND_SOC_DAIFMT_PDM 7 /* Pulse density modulation */
23
24 /* left and right justified also known as MSB and LSB respectively */
25 #define SND_SOC_DAIFMT_MSB SND_SOC_DAIFMT_LEFT_J
26 #define SND_SOC_DAIFMT_LSB SND_SOC_DAIFMT_RIGHT_J
27
28 /*
29 * DAI hardware signal inversions.
30 *
31 * Specifies whether the DAI can also support inverted clocks for the specified
32 * format.
33 */
34 #define SND_SOC_DAIFMT_NB_NF (1 << 8) /* normal bit clock + frame */
35 #define SND_SOC_DAIFMT_NB_IF (2 << 8) /* normal BCLK + inv FRM */
36 #define SND_SOC_DAIFMT_IB_NF (3 << 8) /* invert BCLK + nor FRM */
37 #define SND_SOC_DAIFMT_IB_IF (4 << 8) /* invert BCLK + FRM */
38
39 /*
40 * DAI hardware clock masters.
41 *
42 * This is wrt the codec, the inverse is true for the interface
43 * i.e. if the codec is clk and FRM master then the interface is
44 * clk and frame slave.
45 */
46 #define SND_SOC_DAIFMT_CBM_CFM (1 << 12) /* codec clk & FRM master */
47 #define SND_SOC_DAIFMT_CBS_CFM (2 << 12) /* codec clk slave & FRM master */
48 #define SND_SOC_DAIFMT_CBM_CFS (3 << 12) /* codec clk master & frame slave */
49 #define SND_SOC_DAIFMT_CBS_CFS (4 << 12) /* codec clk & FRM slave */
50
51 #define SND_SOC_DAIFMT_FORMAT_MASK 0x000f
52 #define SND_SOC_DAIFMT_CLOCK_MASK 0x00f0
53 #define SND_SOC_DAIFMT_INV_MASK 0x0f00
54 #define SND_SOC_DAIFMT_MASTER_MASK 0xf000
55
56 /*
57 * Master Clock Directions
58 */
59 #define SND_SOC_CLOCK_IN 0
60 #define SND_SOC_CLOCK_OUT 1
61
62 /* I2S Tx Control */
63 #define I2S_TX_ON 1
64 #define I2S_TX_OFF 0
65
66 #define FIFO_LENGTH 64
67
68 /* I2s Registers */
69 struct i2s_reg {
70 unsigned int con; /* base + 0 , Control register */
71 unsigned int mod; /* Mode register */
72 unsigned int fic; /* FIFO control register */
73 unsigned int psr; /* Reserved */
74 unsigned int txd; /* Transmit data register */
75 unsigned int rxd; /* Receive Data Register */
76 };
77
78 /* This structure stores the i2s related information */
79 struct i2s_uc_priv {
80 unsigned int rfs; /* LR clock frame size */
81 unsigned int bfs; /* Bit clock frame size */
82 unsigned int audio_pll_clk; /* Audio pll frequency in Hz */
83 unsigned int samplingrate; /* sampling rate */
84 unsigned int bitspersample; /* bits per sample */
85 unsigned int channels; /* audio channels */
86 unsigned int base_address; /* I2S Register Base */
87 unsigned int id; /* I2S controller id */
88 };
89
90 /* Operations for i2s devices */
91 struct i2s_ops {
92 /**
93 * tx_data() - Transmit audio data
94 *
95 * @dev: I2C device
96 * @data: Data buffer to play
97 * @data_size: Size of data buffer in bytes
98 * @return 0 if OK, -ve on error
99 */
100 int (*tx_data)(struct udevice *dev, void *data, uint data_size);
101 };
102
103 #define i2s_get_ops(dev) ((struct i2s_ops *)(dev)->driver->ops)
104
105 /**
106 * i2s_tx_data() - Transmit audio data
107 *
108 * @dev: I2C device
109 * @data: Data buffer to play
110 * @data_size: Size of data buffer in bytes
111 * @return 0 if OK, -ve on error
112 */
113 int i2s_tx_data(struct udevice *dev, void *data, uint data_size);
114
115 /*
116 * Sends the given data through i2s tx
117 *
118 * @param pi2s_tx pointer of i2s transmitter parameter structure.
119 * @param data address of the data buffer
120 * @param data_size size of the data (in bytes)
121 * @return int value 0 for success, -1 in case of error
122 */
123 int i2s_transfer_tx_data(struct i2s_uc_priv *pi2s_tx, void *data,
124 uint data_size);
125
126 #endif /* __I2S_H__ */