2 * (C) Copyright 2008 Semihalf
4 * (C) Copyright 2000-2005
5 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
7 * SPDX-License-Identifier: GPL-2.0+
8 ********************************************************************
9 * NOTE: This header file defines an interface to U-Boot. Including
10 * this (unmodified) header file in another file is considered normal
11 * use of U-Boot, and does *not* fall under the heading of "derived
13 ********************************************************************
20 #include <asm/byteorder.h>
22 /* Define this to avoid #ifdefs later on */
26 #include <sys/types.h>
28 /* new uImage format support enabled on host */
30 #define CONFIG_OF_LIBFDT 1
31 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
33 #define IMAGE_ENABLE_IGNORE 0
34 #define IMAGE_INDENT_STRING ""
39 #include <asm/u-boot.h>
42 /* Take notice of the 'ignore' property for hashes */
43 #define IMAGE_ENABLE_IGNORE 1
44 #define IMAGE_INDENT_STRING " "
46 #endif /* USE_HOSTCC */
48 #if defined(CONFIG_FIT)
51 #include <fdt_support.h>
52 # ifdef CONFIG_SPL_BUILD
53 # ifdef CONFIG_SPL_CRC32_SUPPORT
54 # define IMAGE_ENABLE_CRC32 1
56 # ifdef CONFIG_SPL_MD5_SUPPORT
57 # define IMAGE_ENABLE_MD5 1
59 # ifdef CONFIG_SPL_SHA1_SUPPORT
60 # define IMAGE_ENABLE_SHA1 1
62 # ifdef CONFIG_SPL_SHA256_SUPPORT
63 # define IMAGE_ENABLE_SHA256 1
66 # define CONFIG_CRC32 /* FIT images need CRC32 support */
67 # define CONFIG_MD5 /* and MD5 */
68 # define CONFIG_SHA1 /* and SHA1 */
69 # define CONFIG_SHA256 /* and SHA256 */
70 # define IMAGE_ENABLE_CRC32 1
71 # define IMAGE_ENABLE_MD5 1
72 # define IMAGE_ENABLE_SHA1 1
73 # define IMAGE_ENABLE_SHA256 1
76 #ifdef CONFIG_FIT_DISABLE_SHA256
78 #undef IMAGE_ENABLE_SHA256
81 #ifndef IMAGE_ENABLE_CRC32
82 #define IMAGE_ENABLE_CRC32 0
85 #ifndef IMAGE_ENABLE_MD5
86 #define IMAGE_ENABLE_MD5 0
89 #ifndef IMAGE_ENABLE_SHA1
90 #define IMAGE_ENABLE_SHA1 0
93 #ifndef IMAGE_ENABLE_SHA256
94 #define IMAGE_ENABLE_SHA256 0
97 #endif /* CONFIG_FIT */
99 #ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH
100 # define IMAGE_ENABLE_RAMDISK_HIGH 1
102 # define IMAGE_ENABLE_RAMDISK_HIGH 0
105 #ifdef CONFIG_OF_LIBFDT
106 # define IMAGE_ENABLE_OF_LIBFDT 1
108 # define IMAGE_ENABLE_OF_LIBFDT 0
111 #ifdef CONFIG_SYS_BOOT_GET_CMDLINE
112 # define IMAGE_BOOT_GET_CMDLINE 1
114 # define IMAGE_BOOT_GET_CMDLINE 0
117 #ifdef CONFIG_OF_BOARD_SETUP
118 # define IMAGE_OF_BOARD_SETUP 1
120 # define IMAGE_OF_BOARD_SETUP 0
123 #ifdef CONFIG_OF_SYSTEM_SETUP
124 # define IMAGE_OF_SYSTEM_SETUP 1
126 # define IMAGE_OF_SYSTEM_SETUP 0
130 * Operating System Codes
132 #define IH_OS_INVALID 0 /* Invalid OS */
133 #define IH_OS_OPENBSD 1 /* OpenBSD */
134 #define IH_OS_NETBSD 2 /* NetBSD */
135 #define IH_OS_FREEBSD 3 /* FreeBSD */
136 #define IH_OS_4_4BSD 4 /* 4.4BSD */
137 #define IH_OS_LINUX 5 /* Linux */
138 #define IH_OS_SVR4 6 /* SVR4 */
139 #define IH_OS_ESIX 7 /* Esix */
140 #define IH_OS_SOLARIS 8 /* Solaris */
141 #define IH_OS_IRIX 9 /* Irix */
142 #define IH_OS_SCO 10 /* SCO */
143 #define IH_OS_DELL 11 /* Dell */
144 #define IH_OS_NCR 12 /* NCR */
145 #define IH_OS_LYNXOS 13 /* LynxOS */
146 #define IH_OS_VXWORKS 14 /* VxWorks */
147 #define IH_OS_PSOS 15 /* pSOS */
148 #define IH_OS_QNX 16 /* QNX */
149 #define IH_OS_U_BOOT 17 /* Firmware */
150 #define IH_OS_RTEMS 18 /* RTEMS */
151 #define IH_OS_ARTOS 19 /* ARTOS */
152 #define IH_OS_UNITY 20 /* Unity OS */
153 #define IH_OS_INTEGRITY 21 /* INTEGRITY */
154 #define IH_OS_OSE 22 /* OSE */
155 #define IH_OS_PLAN9 23 /* Plan 9 */
156 #define IH_OS_OPENRTOS 24 /* OpenRTOS */
159 * CPU Architecture Codes (supported by Linux)
161 #define IH_ARCH_INVALID 0 /* Invalid CPU */
162 #define IH_ARCH_ALPHA 1 /* Alpha */
163 #define IH_ARCH_ARM 2 /* ARM */
164 #define IH_ARCH_I386 3 /* Intel x86 */
165 #define IH_ARCH_IA64 4 /* IA64 */
166 #define IH_ARCH_MIPS 5 /* MIPS */
167 #define IH_ARCH_MIPS64 6 /* MIPS 64 Bit */
168 #define IH_ARCH_PPC 7 /* PowerPC */
169 #define IH_ARCH_S390 8 /* IBM S390 */
170 #define IH_ARCH_SH 9 /* SuperH */
171 #define IH_ARCH_SPARC 10 /* Sparc */
172 #define IH_ARCH_SPARC64 11 /* Sparc 64 Bit */
173 #define IH_ARCH_M68K 12 /* M68K */
174 #define IH_ARCH_MICROBLAZE 14 /* MicroBlaze */
175 #define IH_ARCH_NIOS2 15 /* Nios-II */
176 #define IH_ARCH_BLACKFIN 16 /* Blackfin */
177 #define IH_ARCH_AVR32 17 /* AVR32 */
178 #define IH_ARCH_ST200 18 /* STMicroelectronics ST200 */
179 #define IH_ARCH_SANDBOX 19 /* Sandbox architecture (test only) */
180 #define IH_ARCH_NDS32 20 /* ANDES Technology - NDS32 */
181 #define IH_ARCH_OPENRISC 21 /* OpenRISC 1000 */
182 #define IH_ARCH_ARM64 22 /* ARM64 */
183 #define IH_ARCH_ARC 23 /* Synopsys DesignWare ARC */
184 #define IH_ARCH_X86_64 24 /* AMD x86_64, Intel and Via */
189 * "Standalone Programs" are directly runnable in the environment
190 * provided by U-Boot; it is expected that (if they behave
191 * well) you can continue to work in U-Boot after return from
192 * the Standalone Program.
193 * "OS Kernel Images" are usually images of some Embedded OS which
194 * will take over control completely. Usually these programs
195 * will install their own set of exception handlers, device
196 * drivers, set up the MMU, etc. - this means, that you cannot
197 * expect to re-enter U-Boot except by resetting the CPU.
198 * "RAMDisk Images" are more or less just data blocks, and their
199 * parameters (address, size) are passed to an OS kernel that is
201 * "Multi-File Images" contain several images, typically an OS
202 * (Linux) kernel image and one or more data images like
203 * RAMDisks. This construct is useful for instance when you want
204 * to boot over the network using BOOTP etc., where the boot
205 * server provides just a single image file, but you want to get
206 * for instance an OS kernel and a RAMDisk image.
208 * "Multi-File Images" start with a list of image sizes, each
209 * image size (in bytes) specified by an "uint32_t" in network
210 * byte order. This list is terminated by an "(uint32_t)0".
211 * Immediately after the terminating 0 follow the images, one by
212 * one, all aligned on "uint32_t" boundaries (size rounded up to
213 * a multiple of 4 bytes - except for the last file).
215 * "Firmware Images" are binary images containing firmware (like
216 * U-Boot or FPGA images) which usually will be programmed to
219 * "Script files" are command sequences that will be executed by
220 * U-Boot's command interpreter; this feature is especially
221 * useful when you configure U-Boot to use a real shell (hush)
222 * as command interpreter (=> Shell Scripts).
225 #define IH_TYPE_INVALID 0 /* Invalid Image */
226 #define IH_TYPE_STANDALONE 1 /* Standalone Program */
227 #define IH_TYPE_KERNEL 2 /* OS Kernel Image */
228 #define IH_TYPE_RAMDISK 3 /* RAMDisk Image */
229 #define IH_TYPE_MULTI 4 /* Multi-File Image */
230 #define IH_TYPE_FIRMWARE 5 /* Firmware Image */
231 #define IH_TYPE_SCRIPT 6 /* Script file */
232 #define IH_TYPE_FILESYSTEM 7 /* Filesystem Image (any type) */
233 #define IH_TYPE_FLATDT 8 /* Binary Flat Device Tree Blob */
234 #define IH_TYPE_KWBIMAGE 9 /* Kirkwood Boot Image */
235 #define IH_TYPE_IMXIMAGE 10 /* Freescale IMXBoot Image */
236 #define IH_TYPE_UBLIMAGE 11 /* Davinci UBL Image */
237 #define IH_TYPE_OMAPIMAGE 12 /* TI OMAP Config Header Image */
238 #define IH_TYPE_AISIMAGE 13 /* TI Davinci AIS Image */
239 #define IH_TYPE_KERNEL_NOLOAD 14 /* OS Kernel Image, can run from any load address */
240 #define IH_TYPE_PBLIMAGE 15 /* Freescale PBL Boot Image */
241 #define IH_TYPE_MXSIMAGE 16 /* Freescale MXSBoot Image */
242 #define IH_TYPE_GPIMAGE 17 /* TI Keystone GPHeader Image */
243 #define IH_TYPE_ATMELIMAGE 18 /* ATMEL ROM bootable Image */
244 #define IH_TYPE_SOCFPGAIMAGE 19 /* Altera SOCFPGA Preloader */
245 #define IH_TYPE_X86_SETUP 20 /* x86 setup.bin Image */
246 #define IH_TYPE_LPC32XXIMAGE 21 /* x86 setup.bin Image */
247 #define IH_TYPE_LOADABLE 22 /* A list of typeless images */
252 #define IH_COMP_NONE 0 /* No Compression Used */
253 #define IH_COMP_GZIP 1 /* gzip Compression Used */
254 #define IH_COMP_BZIP2 2 /* bzip2 Compression Used */
255 #define IH_COMP_LZMA 3 /* lzma Compression Used */
256 #define IH_COMP_LZO 4 /* lzo Compression Used */
258 #define IH_MAGIC 0x27051956 /* Image Magic Number */
259 #define IH_NMLEN 32 /* Image Name Length */
261 /* Reused from common.h */
262 #define ROUND(a, b) (((a) + (b) - 1) & ~((b) - 1))
265 * Legacy format image header,
266 * all data in network byte order (aka natural aka bigendian).
268 typedef struct image_header
{
269 __be32 ih_magic
; /* Image Header Magic Number */
270 __be32 ih_hcrc
; /* Image Header CRC Checksum */
271 __be32 ih_time
; /* Image Creation Timestamp */
272 __be32 ih_size
; /* Image Data Size */
273 __be32 ih_load
; /* Data Load Address */
274 __be32 ih_ep
; /* Entry Point Address */
275 __be32 ih_dcrc
; /* Image Data CRC Checksum */
276 uint8_t ih_os
; /* Operating System */
277 uint8_t ih_arch
; /* CPU architecture */
278 uint8_t ih_type
; /* Image Type */
279 uint8_t ih_comp
; /* Compression Type */
280 uint8_t ih_name
[IH_NMLEN
]; /* Image Name */
283 typedef struct image_info
{
284 ulong start
, end
; /* start/end of blob */
285 ulong image_start
, image_len
; /* start of image within blob, len of image */
286 ulong load
; /* load addr for the image */
287 uint8_t comp
, type
, os
; /* compression, type of image, os type */
288 uint8_t arch
; /* CPU architecture */
292 * Legacy and FIT format headers used by do_bootm() and do_bootm_<os>()
295 typedef struct bootm_headers
{
297 * Legacy os image header, if it is a multi component image
298 * then boot_get_ramdisk() and get_fdt() will attempt to get
299 * data from second and third component accordingly.
301 image_header_t
*legacy_hdr_os
; /* image header pointer */
302 image_header_t legacy_hdr_os_copy
; /* header copy */
303 ulong legacy_hdr_valid
;
305 #if defined(CONFIG_FIT)
306 const char *fit_uname_cfg
; /* configuration node unit name */
308 void *fit_hdr_os
; /* os FIT image header */
309 const char *fit_uname_os
; /* os subimage node unit name */
310 int fit_noffset_os
; /* os subimage node offset */
312 void *fit_hdr_rd
; /* init ramdisk FIT image header */
313 const char *fit_uname_rd
; /* init ramdisk subimage node unit name */
314 int fit_noffset_rd
; /* init ramdisk subimage node offset */
316 void *fit_hdr_fdt
; /* FDT blob FIT image header */
317 const char *fit_uname_fdt
; /* FDT blob subimage node unit name */
318 int fit_noffset_fdt
;/* FDT blob subimage node offset */
320 void *fit_hdr_setup
; /* x86 setup FIT image header */
321 const char *fit_uname_setup
; /* x86 setup subimage node name */
322 int fit_noffset_setup
;/* x86 setup subimage node offset */
326 image_info_t os
; /* os image info */
327 ulong ep
; /* entry point of OS */
329 ulong rd_start
, rd_end
;/* ramdisk start/end */
331 char *ft_addr
; /* flat dev tree address */
332 ulong ft_len
; /* length of flat device tree */
341 int verify
; /* getenv("verify")[0] != 'n' */
343 #define BOOTM_STATE_START (0x00000001)
344 #define BOOTM_STATE_FINDOS (0x00000002)
345 #define BOOTM_STATE_FINDOTHER (0x00000004)
346 #define BOOTM_STATE_LOADOS (0x00000008)
347 #define BOOTM_STATE_RAMDISK (0x00000010)
348 #define BOOTM_STATE_FDT (0x00000020)
349 #define BOOTM_STATE_OS_CMDLINE (0x00000040)
350 #define BOOTM_STATE_OS_BD_T (0x00000080)
351 #define BOOTM_STATE_OS_PREP (0x00000100)
352 #define BOOTM_STATE_OS_FAKE_GO (0x00000200) /* 'Almost' run the OS */
353 #define BOOTM_STATE_OS_GO (0x00000400)
357 struct lmb lmb
; /* for memory mgmt */
361 extern bootm_headers_t images
;
364 * Some systems (for example LWMON) have very short watchdog periods;
365 * we must make sure to split long operations like memmove() or
366 * checksum calculations into reasonable chunks.
369 #define CHUNKSZ (64 * 1024)
372 #ifndef CHUNKSZ_CRC32
373 #define CHUNKSZ_CRC32 (64 * 1024)
377 #define CHUNKSZ_MD5 (64 * 1024)
381 #define CHUNKSZ_SHA1 (64 * 1024)
384 #define uimage_to_cpu(x) be32_to_cpu(x)
385 #define cpu_to_uimage(x) cpu_to_be32(x)
388 * Translation table for entries of a specific type; used by
389 * get_table_entry_id() and get_table_entry_name().
391 typedef struct table_entry
{
393 char *sname
; /* short (input) name to find table entry */
394 char *lname
; /* long (output) name to print for messages */
398 * get_table_entry_id() scans the translation table trying to find an
399 * entry that matches the given short name. If a matching entry is
400 * found, it's id is returned to the caller.
402 int get_table_entry_id(const table_entry_t
*table
,
403 const char *table_name
, const char *name
);
405 * get_table_entry_name() scans the translation table trying to find
406 * an entry that matches the given id. If a matching entry is found,
407 * its long name is returned to the caller.
409 char *get_table_entry_name(const table_entry_t
*table
, char *msg
, int id
);
411 const char *genimg_get_os_name(uint8_t os
);
412 const char *genimg_get_arch_name(uint8_t arch
);
413 const char *genimg_get_type_name(uint8_t type
);
414 const char *genimg_get_comp_name(uint8_t comp
);
415 int genimg_get_os_id(const char *name
);
416 int genimg_get_arch_id(const char *name
);
417 int genimg_get_type_id(const char *name
);
418 int genimg_get_comp_id(const char *name
);
419 void genimg_print_size(uint32_t size
);
421 #if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || \
423 #define IMAGE_ENABLE_TIMESTAMP 1
425 #define IMAGE_ENABLE_TIMESTAMP 0
427 void genimg_print_time(time_t timestamp
);
429 /* What to do with a image load address ('load = <> 'in the FIT) */
431 FIT_LOAD_IGNORED
, /* Ignore load address */
432 FIT_LOAD_OPTIONAL
, /* Can be provided, but optional */
433 FIT_LOAD_OPTIONAL_NON_ZERO
, /* Optional, a value of 0 is ignored */
434 FIT_LOAD_REQUIRED
, /* Must be provided */
437 int boot_get_setup(bootm_headers_t
*images
, uint8_t arch
, ulong
*setup_start
,
441 /* Image format types, returned by _get_format() routine */
442 #define IMAGE_FORMAT_INVALID 0x00
443 #if defined(CONFIG_IMAGE_FORMAT_LEGACY)
444 #define IMAGE_FORMAT_LEGACY 0x01 /* legacy image_header based format */
446 #define IMAGE_FORMAT_FIT 0x02 /* new, libfdt based format */
447 #define IMAGE_FORMAT_ANDROID 0x03 /* Android boot image */
449 ulong
genimg_get_kernel_addr_fit(char * const img_addr
,
450 const char **fit_uname_config
,
451 const char **fit_uname_kernel
);
452 ulong
genimg_get_kernel_addr(char * const img_addr
);
453 int genimg_get_format(const void *img_addr
);
454 int genimg_has_config(bootm_headers_t
*images
);
455 ulong
genimg_get_image(ulong img_addr
);
457 int boot_get_ramdisk(int argc
, char * const argv
[], bootm_headers_t
*images
,
458 uint8_t arch
, ulong
*rd_start
, ulong
*rd_end
);
461 * boot_get_loadable - routine to load a list of binaries to memory
462 * @argc: Ignored Argument
463 * @argv: Ignored Argument
464 * @images: pointer to the bootm images structure
465 * @arch: expected architecture for the image
466 * @ld_start: Ignored Argument
467 * @ld_len: Ignored Argument
469 * boot_get_loadable() will take the given FIT configuration, and look
470 * for a field named "loadables". Loadables, is a list of elements in
471 * the FIT given as strings. exe:
472 * loadables = "linux_kernel@1", "fdt@2";
473 * this function will attempt to parse each string, and load the
474 * corresponding element from the FIT into memory. Once placed,
475 * no aditional actions are taken.
478 * 0, if only valid images or no images are found
479 * error code, if an error occurs during fit_image_load
481 int boot_get_loadable(int argc
, char * const argv
[], bootm_headers_t
*images
,
482 uint8_t arch
, const ulong
*ld_start
, ulong
* const ld_len
);
483 #endif /* !USE_HOSTCC */
485 int boot_get_setup_fit(bootm_headers_t
*images
, uint8_t arch
,
486 ulong
*setup_start
, ulong
*setup_len
);
489 * fit_image_load() - load an image from a FIT
491 * This deals with all aspects of loading an image from a FIT, including
492 * selecting the right image based on configuration, verifying it, printing
493 * out progress messages, checking the type/arch/os and optionally copying it
494 * to the right load address.
496 * The property to look up is defined by image_type.
498 * @param images Boot images structure
499 * @param addr Address of FIT in memory
500 * @param fit_unamep On entry this is the requested image name
501 * (e.g. "kernel@1") or NULL to use the default. On exit
502 * points to the selected image name
503 * @param fit_uname_configp On entry this is the requested configuration
504 * name (e.g. "conf@1") or NULL to use the default. On
505 * exit points to the selected configuration name.
506 * @param arch Expected architecture (IH_ARCH_...)
507 * @param image_type Required image type (IH_TYPE_...). If this is
508 * IH_TYPE_KERNEL then we allow IH_TYPE_KERNEL_NOLOAD
510 * @param bootstage_id ID of starting bootstage to use for progress updates.
511 * This will be added to the BOOTSTAGE_SUB values when
512 * calling bootstage_mark()
513 * @param load_op Decribes what to do with the load address
514 * @param datap Returns address of loaded image
515 * @param lenp Returns length of loaded image
516 * @return node offset of image, or -ve error code on error
518 int fit_image_load(bootm_headers_t
*images
, ulong addr
,
519 const char **fit_unamep
, const char **fit_uname_configp
,
520 int arch
, int image_type
, int bootstage_id
,
521 enum fit_load_op load_op
, ulong
*datap
, ulong
*lenp
);
525 * fit_get_node_from_config() - Look up an image a FIT by type
527 * This looks in the selected conf@ node (images->fit_uname_cfg) for a
528 * particular image type (e.g. "kernel") and then finds the image that is
531 * For example, for something like:
540 * kernel = "kernel@1";
544 * the function will return the node offset of the kernel@1 node, assuming
545 * that conf@1 is the chosen configuration.
547 * @param images Boot images structure
548 * @param prop_name Property name to look up (FIT_..._PROP)
549 * @param addr Address of FIT in memory
551 int fit_get_node_from_config(bootm_headers_t
*images
, const char *prop_name
,
554 int boot_get_fdt(int flag
, int argc
, char * const argv
[], uint8_t arch
,
555 bootm_headers_t
*images
,
556 char **of_flat_tree
, ulong
*of_size
);
557 void boot_fdt_add_mem_rsv_regions(struct lmb
*lmb
, void *fdt_blob
);
558 int boot_relocate_fdt(struct lmb
*lmb
, char **of_flat_tree
, ulong
*of_size
);
560 int boot_ramdisk_high(struct lmb
*lmb
, ulong rd_data
, ulong rd_len
,
561 ulong
*initrd_start
, ulong
*initrd_end
);
562 int boot_get_cmdline(struct lmb
*lmb
, ulong
*cmd_start
, ulong
*cmd_end
);
563 #ifdef CONFIG_SYS_BOOT_GET_KBD
564 int boot_get_kbd(struct lmb
*lmb
, bd_t
**kbd
);
565 #endif /* CONFIG_SYS_BOOT_GET_KBD */
566 #endif /* !USE_HOSTCC */
568 /*******************************************************************/
569 /* Legacy format specific code (prefixed with image_) */
570 /*******************************************************************/
571 static inline uint32_t image_get_header_size(void)
573 return (sizeof(image_header_t
));
576 #define image_get_hdr_l(f) \
577 static inline uint32_t image_get_##f(const image_header_t *hdr) \
579 return uimage_to_cpu(hdr->ih_##f); \
581 image_get_hdr_l(magic
) /* image_get_magic */
582 image_get_hdr_l(hcrc
) /* image_get_hcrc */
583 image_get_hdr_l(time
) /* image_get_time */
584 image_get_hdr_l(size
) /* image_get_size */
585 image_get_hdr_l(load
) /* image_get_load */
586 image_get_hdr_l(ep
) /* image_get_ep */
587 image_get_hdr_l(dcrc
) /* image_get_dcrc */
589 #define image_get_hdr_b(f) \
590 static inline uint8_t image_get_##f(const image_header_t *hdr) \
592 return hdr->ih_##f; \
594 image_get_hdr_b(os
) /* image_get_os */
595 image_get_hdr_b(arch
) /* image_get_arch */
596 image_get_hdr_b(type
) /* image_get_type */
597 image_get_hdr_b(comp
) /* image_get_comp */
599 static inline char *image_get_name(const image_header_t
*hdr
)
601 return (char *)hdr
->ih_name
;
604 static inline uint32_t image_get_data_size(const image_header_t
*hdr
)
606 return image_get_size(hdr
);
610 * image_get_data - get image payload start address
613 * image_get_data() returns address of the image payload. For single
614 * component images it is image data start. For multi component
615 * images it points to the null terminated table of sub-images sizes.
618 * image payload data start address
620 static inline ulong
image_get_data(const image_header_t
*hdr
)
622 return ((ulong
)hdr
+ image_get_header_size());
625 static inline uint32_t image_get_image_size(const image_header_t
*hdr
)
627 return (image_get_size(hdr
) + image_get_header_size());
629 static inline ulong
image_get_image_end(const image_header_t
*hdr
)
631 return ((ulong
)hdr
+ image_get_image_size(hdr
));
634 #define image_set_hdr_l(f) \
635 static inline void image_set_##f(image_header_t *hdr, uint32_t val) \
637 hdr->ih_##f = cpu_to_uimage(val); \
639 image_set_hdr_l(magic
) /* image_set_magic */
640 image_set_hdr_l(hcrc
) /* image_set_hcrc */
641 image_set_hdr_l(time
) /* image_set_time */
642 image_set_hdr_l(size
) /* image_set_size */
643 image_set_hdr_l(load
) /* image_set_load */
644 image_set_hdr_l(ep
) /* image_set_ep */
645 image_set_hdr_l(dcrc
) /* image_set_dcrc */
647 #define image_set_hdr_b(f) \
648 static inline void image_set_##f(image_header_t *hdr, uint8_t val) \
652 image_set_hdr_b(os
) /* image_set_os */
653 image_set_hdr_b(arch
) /* image_set_arch */
654 image_set_hdr_b(type
) /* image_set_type */
655 image_set_hdr_b(comp
) /* image_set_comp */
657 static inline void image_set_name(image_header_t
*hdr
, const char *name
)
659 strncpy(image_get_name(hdr
), name
, IH_NMLEN
);
662 int image_check_hcrc(const image_header_t
*hdr
);
663 int image_check_dcrc(const image_header_t
*hdr
);
665 ulong
getenv_bootm_low(void);
666 phys_size_t
getenv_bootm_size(void);
667 phys_size_t
getenv_bootm_mapsize(void);
669 void memmove_wd(void *to
, void *from
, size_t len
, ulong chunksz
);
671 static inline int image_check_magic(const image_header_t
*hdr
)
673 return (image_get_magic(hdr
) == IH_MAGIC
);
675 static inline int image_check_type(const image_header_t
*hdr
, uint8_t type
)
677 return (image_get_type(hdr
) == type
);
679 static inline int image_check_arch(const image_header_t
*hdr
, uint8_t arch
)
681 return (image_get_arch(hdr
) == arch
);
683 static inline int image_check_os(const image_header_t
*hdr
, uint8_t os
)
685 return (image_get_os(hdr
) == os
);
688 ulong
image_multi_count(const image_header_t
*hdr
);
689 void image_multi_getimg(const image_header_t
*hdr
, ulong idx
,
690 ulong
*data
, ulong
*len
);
692 void image_print_contents(const void *hdr
);
695 static inline int image_check_target_arch(const image_header_t
*hdr
)
697 #ifndef IH_ARCH_DEFAULT
698 # error "please define IH_ARCH_DEFAULT in your arch asm/u-boot.h"
700 return image_check_arch(hdr
, IH_ARCH_DEFAULT
);
702 #endif /* USE_HOSTCC */
705 * Set up properties in the FDT
707 * This sets up properties in the FDT that is to be passed to linux.
709 * @images: Images information
710 * @blob: FDT to update
711 * @of_size: Size of the FDT
712 * @lmb: Points to logical memory block structure
713 * @return 0 if ok, <0 on failure
715 int image_setup_libfdt(bootm_headers_t
*images
, void *blob
,
716 int of_size
, struct lmb
*lmb
);
719 * Set up the FDT to use for booting a kernel
721 * This performs ramdisk setup, sets up the FDT if required, and adds
722 * paramters to the FDT if libfdt is available.
724 * @param images Images information
725 * @return 0 if ok, <0 on failure
727 int image_setup_linux(bootm_headers_t
*images
);
730 * bootz_setup() - Extract stat and size of a Linux xImage
732 * @image: Address of image
733 * @start: Returns start address of image
734 * @end : Returns end address of image
735 * @return 0 if OK, 1 if the image was not recognised
737 int bootz_setup(ulong image
, ulong
*start
, ulong
*end
);
740 /*******************************************************************/
741 /* New uImage format specific code (prefixed with fit_) */
742 /*******************************************************************/
743 #if defined(CONFIG_FIT)
745 #define FIT_IMAGES_PATH "/images"
746 #define FIT_CONFS_PATH "/configurations"
748 /* hash/signature node */
749 #define FIT_HASH_NODENAME "hash"
750 #define FIT_ALGO_PROP "algo"
751 #define FIT_VALUE_PROP "value"
752 #define FIT_IGNORE_PROP "uboot-ignore"
753 #define FIT_SIG_NODENAME "signature"
756 #define FIT_DATA_PROP "data"
757 #define FIT_TIMESTAMP_PROP "timestamp"
758 #define FIT_DESC_PROP "description"
759 #define FIT_ARCH_PROP "arch"
760 #define FIT_TYPE_PROP "type"
761 #define FIT_OS_PROP "os"
762 #define FIT_COMP_PROP "compression"
763 #define FIT_ENTRY_PROP "entry"
764 #define FIT_LOAD_PROP "load"
766 /* configuration node */
767 #define FIT_KERNEL_PROP "kernel"
768 #define FIT_RAMDISK_PROP "ramdisk"
769 #define FIT_FDT_PROP "fdt"
770 #define FIT_LOADABLE_PROP "loadables"
771 #define FIT_DEFAULT_PROP "default"
772 #define FIT_SETUP_PROP "setup"
774 #define FIT_MAX_HASH_LEN HASH_MAX_DIGEST_SIZE
776 /* cmdline argument format parsing */
777 int fit_parse_conf(const char *spec
, ulong addr_curr
,
778 ulong
*addr
, const char **conf_name
);
779 int fit_parse_subimage(const char *spec
, ulong addr_curr
,
780 ulong
*addr
, const char **image_name
);
782 int fit_get_subimage_count(const void *fit
, int images_noffset
);
783 void fit_print_contents(const void *fit
);
784 void fit_image_print(const void *fit
, int noffset
, const char *p
);
787 * fit_get_end - get FIT image size
788 * @fit: pointer to the FIT format image header
791 * size of the FIT image (blob) in memory
793 static inline ulong
fit_get_size(const void *fit
)
795 return fdt_totalsize(fit
);
799 * fit_get_end - get FIT image end
800 * @fit: pointer to the FIT format image header
803 * end address of the FIT image (blob) in memory
805 static inline ulong
fit_get_end(const void *fit
)
807 return (ulong
)fit
+ fdt_totalsize(fit
);
811 * fit_get_name - get FIT node name
812 * @fit: pointer to the FIT format image header
816 * pointer to node name, on success
818 static inline const char *fit_get_name(const void *fit_hdr
,
819 int noffset
, int *len
)
821 return fdt_get_name(fit_hdr
, noffset
, len
);
824 int fit_get_desc(const void *fit
, int noffset
, char **desc
);
825 int fit_get_timestamp(const void *fit
, int noffset
, time_t *timestamp
);
827 int fit_image_get_node(const void *fit
, const char *image_uname
);
828 int fit_image_get_os(const void *fit
, int noffset
, uint8_t *os
);
829 int fit_image_get_arch(const void *fit
, int noffset
, uint8_t *arch
);
830 int fit_image_get_type(const void *fit
, int noffset
, uint8_t *type
);
831 int fit_image_get_comp(const void *fit
, int noffset
, uint8_t *comp
);
832 int fit_image_get_load(const void *fit
, int noffset
, ulong
*load
);
833 int fit_image_get_entry(const void *fit
, int noffset
, ulong
*entry
);
834 int fit_image_get_data(const void *fit
, int noffset
,
835 const void **data
, size_t *size
);
837 int fit_image_hash_get_algo(const void *fit
, int noffset
, char **algo
);
838 int fit_image_hash_get_value(const void *fit
, int noffset
, uint8_t **value
,
841 int fit_set_timestamp(void *fit
, int noffset
, time_t timestamp
);
844 * fit_add_verification_data() - add verification data to FIT image nodes
846 * @keydir: Directory containing keys
847 * @kwydest: FDT blob to write public key information to
848 * @fit: Pointer to the FIT format image header
849 * @comment: Comment to add to signature nodes
850 * @require_keys: Mark all keys as 'required'
852 * Adds hash values for all component images in the FIT blob.
853 * Hashes are calculated for all component images which have hash subnodes
854 * with algorithm property set to one of the supported hash algorithms.
856 * Also add signatures if signature nodes are present.
860 * libfdt error code, on failure
862 int fit_add_verification_data(const char *keydir
, void *keydest
, void *fit
,
863 const char *comment
, int require_keys
);
865 int fit_image_verify(const void *fit
, int noffset
);
866 int fit_config_verify(const void *fit
, int conf_noffset
);
867 int fit_all_image_verify(const void *fit
);
868 int fit_image_check_os(const void *fit
, int noffset
, uint8_t os
);
869 int fit_image_check_arch(const void *fit
, int noffset
, uint8_t arch
);
870 int fit_image_check_type(const void *fit
, int noffset
, uint8_t type
);
871 int fit_image_check_comp(const void *fit
, int noffset
, uint8_t comp
);
872 int fit_check_format(const void *fit
);
874 int fit_conf_find_compat(const void *fit
, const void *fdt
);
875 int fit_conf_get_node(const void *fit
, const char *conf_uname
);
878 * fit_conf_get_prop_node() - Get node refered to by a configuration
880 * @noffset: Offset of conf@xxx node to check
881 * @prop_name: Property to read from the conf node
883 * The conf@ nodes contain references to other nodes, using properties
884 * like 'kernel = "kernel@1"'. Given such a property name (e.g. "kernel"),
885 * return the offset of the node referred to (e.g. offset of node
886 * "/images/kernel@1".
888 int fit_conf_get_prop_node(const void *fit
, int noffset
,
889 const char *prop_name
);
891 void fit_conf_print(const void *fit
, int noffset
, const char *p
);
893 int fit_check_ramdisk(const void *fit
, int os_noffset
,
894 uint8_t arch
, int verify
);
896 int calculate_hash(const void *data
, int data_len
, const char *algo
,
897 uint8_t *value
, int *value_len
);
900 * At present we only support signing on the host, and verification on the
903 #if defined(CONFIG_FIT_SIGNATURE)
905 # define IMAGE_ENABLE_SIGN 1
906 # define IMAGE_ENABLE_VERIFY 1
907 # include <openssl/evp.h>
909 # define IMAGE_ENABLE_SIGN 0
910 # define IMAGE_ENABLE_VERIFY 1
913 # define IMAGE_ENABLE_SIGN 0
914 # define IMAGE_ENABLE_VERIFY 0
918 void *image_get_host_blob(void);
919 void image_set_host_blob(void *host_blob
);
920 # define gd_fdt_blob() image_get_host_blob()
922 # define gd_fdt_blob() (gd->fdt_blob)
925 #ifdef CONFIG_FIT_BEST_MATCH
926 #define IMAGE_ENABLE_BEST_MATCH 1
928 #define IMAGE_ENABLE_BEST_MATCH 0
931 /* Information passed to the signing routines */
932 struct image_sign_info
{
933 const char *keydir
; /* Directory conaining keys */
934 const char *keyname
; /* Name of key to use */
935 void *fit
; /* Pointer to FIT blob */
936 int node_offset
; /* Offset of signature node */
937 struct image_sig_algo
*algo
; /* Algorithm information */
938 const void *fdt_blob
; /* FDT containing public keys */
939 int required_keynode
; /* Node offset of key to use: -1=any */
940 const char *require_keys
; /* Value for 'required' property */
943 /* A part of an image, used for hashing */
944 struct image_region
{
949 #if IMAGE_ENABLE_VERIFY
950 # include <u-boot/rsa-checksum.h>
952 struct checksum_algo
{
954 const int checksum_len
;
956 #if IMAGE_ENABLE_SIGN
957 const EVP_MD
*(*calculate_sign
)(void);
959 int (*calculate
)(const char *name
,
960 const struct image_region region
[],
961 int region_count
, uint8_t *checksum
);
962 const uint8_t *rsa_padding
;
965 struct image_sig_algo
{
966 const char *name
; /* Name of algorithm */
969 * sign() - calculate and return signature for given input data
971 * @info: Specifies key and FIT information
972 * @data: Pointer to the input data
973 * @data_len: Data length
974 * @sigp: Set to an allocated buffer holding the signature
975 * @sig_len: Set to length of the calculated hash
977 * This computes input data signature according to selected algorithm.
978 * Resulting signature value is placed in an allocated buffer, the
979 * pointer is returned as *sigp. The length of the calculated
980 * signature is returned via the sig_len pointer argument. The caller
983 * @return: 0, on success, -ve on error
985 int (*sign
)(struct image_sign_info
*info
,
986 const struct image_region region
[],
987 int region_count
, uint8_t **sigp
, uint
*sig_len
);
990 * add_verify_data() - Add verification information to FDT
992 * Add public key information to the FDT node, suitable for
993 * verification at run-time. The information added depends on the
994 * algorithm being used.
996 * @info: Specifies key and FIT information
997 * @keydest: Destination FDT blob for public key data
998 * @return: 0, on success, -ve on error
1000 int (*add_verify_data
)(struct image_sign_info
*info
, void *keydest
);
1003 * verify() - Verify a signature against some data
1005 * @info: Specifies key and FIT information
1006 * @data: Pointer to the input data
1007 * @data_len: Data length
1009 * @sig_len: Number of bytes in signature
1010 * @return 0 if verified, -ve on error
1012 int (*verify
)(struct image_sign_info
*info
,
1013 const struct image_region region
[], int region_count
,
1014 uint8_t *sig
, uint sig_len
);
1016 /* pointer to checksum algorithm */
1017 struct checksum_algo
*checksum
;
1021 * image_get_sig_algo() - Look up a signature algortihm
1023 * @param name Name of algorithm
1024 * @return pointer to algorithm information, or NULL if not found
1026 struct image_sig_algo
*image_get_sig_algo(const char *name
);
1029 * fit_image_verify_required_sigs() - Verify signatures marked as 'required'
1031 * @fit: FIT to check
1032 * @image_noffset: Offset of image node to check
1033 * @data: Image data to check
1034 * @size: Size of image data
1035 * @sig_blob: FDT containing public keys
1036 * @no_sigsp: Returns 1 if no signatures were required, and
1037 * therefore nothing was checked. The caller may wish
1038 * to fall back to other mechanisms, or refuse to
1040 * @return 0 if all verified ok, <0 on error
1042 int fit_image_verify_required_sigs(const void *fit
, int image_noffset
,
1043 const char *data
, size_t size
, const void *sig_blob
,
1047 * fit_image_check_sig() - Check a single image signature node
1049 * @fit: FIT to check
1050 * @noffset: Offset of signature node to check
1051 * @data: Image data to check
1052 * @size: Size of image data
1053 * @required_keynode: Offset in the control FDT of the required key node,
1054 * if any. If this is given, then the image wil not
1055 * pass verification unless that key is used. If this is
1056 * -1 then any signature will do.
1057 * @err_msgp: In the event of an error, this will be pointed to a
1058 * help error string to display to the user.
1059 * @return 0 if all verified ok, <0 on error
1061 int fit_image_check_sig(const void *fit
, int noffset
, const void *data
,
1062 size_t size
, int required_keynode
, char **err_msgp
);
1065 * fit_region_make_list() - Make a list of regions to hash
1067 * Given a list of FIT regions (offset, size) provided by libfdt, create
1068 * a list of regions (void *, size) for use by the signature creationg
1069 * and verification code.
1071 * @fit: FIT image to process
1072 * @fdt_regions: Regions as returned by libfdt
1073 * @count: Number of regions returned by libfdt
1074 * @region: Place to put list of regions (NULL to allocate it)
1075 * @return pointer to list of regions, or NULL if out of memory
1077 struct image_region
*fit_region_make_list(const void *fit
,
1078 struct fdt_region
*fdt_regions
, int count
,
1079 struct image_region
*region
);
1081 static inline int fit_image_check_target_arch(const void *fdt
, int node
)
1084 return fit_image_check_arch(fdt
, node
, IH_ARCH_DEFAULT
);
1090 #ifdef CONFIG_FIT_VERBOSE
1091 #define fit_unsupported(msg) printf("! %s:%d " \
1092 "FIT images not supported for '%s'\n", \
1093 __FILE__, __LINE__, (msg))
1095 #define fit_unsupported_reset(msg) printf("! %s:%d " \
1096 "FIT images not supported for '%s' " \
1097 "- must reset board to recover!\n", \
1098 __FILE__, __LINE__, (msg))
1100 #define fit_unsupported(msg)
1101 #define fit_unsupported_reset(msg)
1102 #endif /* CONFIG_FIT_VERBOSE */
1103 #endif /* CONFIG_FIT */
1105 #if defined(CONFIG_ANDROID_BOOT_IMAGE)
1106 struct andr_img_hdr
;
1107 int android_image_check_header(const struct andr_img_hdr
*hdr
);
1108 int android_image_get_kernel(const struct andr_img_hdr
*hdr
, int verify
,
1109 ulong
*os_data
, ulong
*os_len
);
1110 int android_image_get_ramdisk(const struct andr_img_hdr
*hdr
,
1111 ulong
*rd_data
, ulong
*rd_len
);
1112 ulong
android_image_get_end(const struct andr_img_hdr
*hdr
);
1113 ulong
android_image_get_kload(const struct andr_img_hdr
*hdr
);
1115 #endif /* CONFIG_ANDROID_BOOT_IMAGE */
1117 #endif /* __IMAGE_H__ */