include/image.h

   1 /*
   2  * (C) Copyright 2008 Semihalf
   3  *
   4  * (C) Copyright 2000-2005
   5  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  ********************************************************************
   9  * NOTE: This header file defines an interface to U-Boot. Including
  10  * this (unmodified) header file in another file is considered normal
  11  * use of U-Boot, and does *not* fall under the heading of "derived
  12  * work".
  13  ********************************************************************
  14  */
  15
  16 #ifndef __IMAGE_H__
  17 #define __IMAGE_H__
  18
  19 #include "compiler.h"
  20 #include <asm/byteorder.h>
  21
  22 /* Define this to avoid #ifdefs later on */
  23 struct lmb;
  24
  25 #ifdef USE_HOSTCC
  26
  27 /* new uImage format support enabled on host */
  28 #define CONFIG_FIT              1
  29 #define CONFIG_OF_LIBFDT        1
  30 #define CONFIG_FIT_VERBOSE      1 /* enable fit_format_{error,warning}() */
  31
  32 #define IMAGE_ENABLE_IGNORE     0
  33 #define IMAGE_INDENT_STRING     ""
  34
  35 #else
  36
  37 #include <lmb.h>
  38 #include <asm/u-boot.h>
  39 #include <command.h>
  40
  41 /* Take notice of the 'ignore' property for hashes */
  42 #define IMAGE_ENABLE_IGNORE     1
  43 #define IMAGE_INDENT_STRING     "   "
  44
  45 #endif /* USE_HOSTCC */
  46
  47 #if defined(CONFIG_FIT)
  48 #include <libfdt.h>
  49 #include <fdt_support.h>
  50 # ifdef CONFIG_SPL_BUILD
  51 #  ifdef CONFIG_SPL_CRC32_SUPPORT
  52 #   define IMAGE_ENABLE_CRC32   1
  53 #  endif
  54 #  ifdef CONFIG_SPL_MD5_SUPPORT
  55 #   define IMAGE_ENABLE_MD5     1
  56 #  endif
  57 #  ifdef CONFIG_SPL_SHA1_SUPPORT
  58 #   define IMAGE_ENABLE_SHA1    1
  59 #  endif
  60 #  ifdef CONFIG_SPL_SHA256_SUPPORT
  61 #   define IMAGE_ENABLE_SHA256  1
  62 #  endif
  63 # else
  64 #  define CONFIG_CRC32          /* FIT images need CRC32 support */
  65 #  define CONFIG_MD5            /* and MD5 */
  66 #  define CONFIG_SHA1           /* and SHA1 */
  67 #  define CONFIG_SHA256         /* and SHA256 */
  68 #  define IMAGE_ENABLE_CRC32    1
  69 #  define IMAGE_ENABLE_MD5      1
  70 #  define IMAGE_ENABLE_SHA1     1
  71 #  define IMAGE_ENABLE_SHA256   1
  72 # endif
  73
  74 #ifndef IMAGE_ENABLE_CRC32
  75 #define IMAGE_ENABLE_CRC32      0
  76 #endif
  77
  78 #ifndef IMAGE_ENABLE_MD5
  79 #define IMAGE_ENABLE_MD5        0
  80 #endif
  81
  82 #ifndef IMAGE_ENABLE_SHA1
  83 #define IMAGE_ENABLE_SHA1       0
  84 #endif
  85
  86 #ifndef IMAGE_ENABLE_SHA256
  87 #define IMAGE_ENABLE_SHA256     0
  88 #endif
  89
  90 #endif /* CONFIG_FIT */
  91
  92 #ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH
  93 # define IMAGE_ENABLE_RAMDISK_HIGH      1
  94 #else
  95 # define IMAGE_ENABLE_RAMDISK_HIGH      0
  96 #endif
  97
  98 #ifdef CONFIG_OF_LIBFDT
  99 # define IMAGE_ENABLE_OF_LIBFDT 1
 100 #else
 101 # define IMAGE_ENABLE_OF_LIBFDT 0
 102 #endif
 103
 104 #ifdef CONFIG_SYS_BOOT_GET_CMDLINE
 105 # define IMAGE_BOOT_GET_CMDLINE         1
 106 #else
 107 # define IMAGE_BOOT_GET_CMDLINE         0
 108 #endif
 109
 110 #ifdef CONFIG_OF_BOARD_SETUP
 111 # define IMAGE_OF_BOARD_SETUP           1
 112 #else
 113 # define IMAGE_OF_BOARD_SETUP           0
 114 #endif
 115
 116 /*
 117  * Operating System Codes
 118  */
 119 #define IH_OS_INVALID           0       /* Invalid OS   */
 120 #define IH_OS_OPENBSD           1       /* OpenBSD      */
 121 #define IH_OS_NETBSD            2       /* NetBSD       */
 122 #define IH_OS_FREEBSD           3       /* FreeBSD      */
 123 #define IH_OS_4_4BSD            4       /* 4.4BSD       */
 124 #define IH_OS_LINUX             5       /* Linux        */
 125 #define IH_OS_SVR4              6       /* SVR4         */
 126 #define IH_OS_ESIX              7       /* Esix         */
 127 #define IH_OS_SOLARIS           8       /* Solaris      */
 128 #define IH_OS_IRIX              9       /* Irix         */
 129 #define IH_OS_SCO               10      /* SCO          */
 130 #define IH_OS_DELL              11      /* Dell         */
 131 #define IH_OS_NCR               12      /* NCR          */
 132 #define IH_OS_LYNXOS            13      /* LynxOS       */
 133 #define IH_OS_VXWORKS           14      /* VxWorks      */
 134 #define IH_OS_PSOS              15      /* pSOS         */
 135 #define IH_OS_QNX               16      /* QNX          */
 136 #define IH_OS_U_BOOT            17      /* Firmware     */
 137 #define IH_OS_RTEMS             18      /* RTEMS        */
 138 #define IH_OS_ARTOS             19      /* ARTOS        */
 139 #define IH_OS_UNITY             20      /* Unity OS     */
 140 #define IH_OS_INTEGRITY         21      /* INTEGRITY    */
 141 #define IH_OS_OSE               22      /* OSE          */
 142 #define IH_OS_PLAN9             23      /* Plan 9       */
 143
 144 /*
 145  * CPU Architecture Codes (supported by Linux)
 146  */
 147 #define IH_ARCH_INVALID         0       /* Invalid CPU  */
 148 #define IH_ARCH_ALPHA           1       /* Alpha        */
 149 #define IH_ARCH_ARM             2       /* ARM          */
 150 #define IH_ARCH_I386            3       /* Intel x86    */
 151 #define IH_ARCH_IA64            4       /* IA64         */
 152 #define IH_ARCH_MIPS            5       /* MIPS         */
 153 #define IH_ARCH_MIPS64          6       /* MIPS  64 Bit */
 154 #define IH_ARCH_PPC             7       /* PowerPC      */
 155 #define IH_ARCH_S390            8       /* IBM S390     */
 156 #define IH_ARCH_SH              9       /* SuperH       */
 157 #define IH_ARCH_SPARC           10      /* Sparc        */
 158 #define IH_ARCH_SPARC64         11      /* Sparc 64 Bit */
 159 #define IH_ARCH_M68K            12      /* M68K         */
 160 #define IH_ARCH_MICROBLAZE      14      /* MicroBlaze   */
 161 #define IH_ARCH_NIOS2           15      /* Nios-II      */
 162 #define IH_ARCH_BLACKFIN        16      /* Blackfin     */
 163 #define IH_ARCH_AVR32           17      /* AVR32        */
 164 #define IH_ARCH_ST200           18      /* STMicroelectronics ST200  */
 165 #define IH_ARCH_SANDBOX         19      /* Sandbox architecture (test only) */
 166 #define IH_ARCH_NDS32           20      /* ANDES Technology - NDS32  */
 167 #define IH_ARCH_OPENRISC        21      /* OpenRISC 1000  */
 168 #define IH_ARCH_ARM64           22      /* ARM64        */
 169 #define IH_ARCH_ARC             23      /* Synopsys DesignWare ARC */
 170
 171 /*
 172  * Image Types
 173  *
 174  * "Standalone Programs" are directly runnable in the environment
 175  *      provided by U-Boot; it is expected that (if they behave
 176  *      well) you can continue to work in U-Boot after return from
 177  *      the Standalone Program.
 178  * "OS Kernel Images" are usually images of some Embedded OS which
 179  *      will take over control completely. Usually these programs
 180  *      will install their own set of exception handlers, device
 181  *      drivers, set up the MMU, etc. - this means, that you cannot
 182  *      expect to re-enter U-Boot except by resetting the CPU.
 183  * "RAMDisk Images" are more or less just data blocks, and their
 184  *      parameters (address, size) are passed to an OS kernel that is
 185  *      being started.
 186  * "Multi-File Images" contain several images, typically an OS
 187  *      (Linux) kernel image and one or more data images like
 188  *      RAMDisks. This construct is useful for instance when you want
 189  *      to boot over the network using BOOTP etc., where the boot
 190  *      server provides just a single image file, but you want to get
 191  *      for instance an OS kernel and a RAMDisk image.
 192  *
 193  *      "Multi-File Images" start with a list of image sizes, each
 194  *      image size (in bytes) specified by an "uint32_t" in network
 195  *      byte order. This list is terminated by an "(uint32_t)0".
 196  *      Immediately after the terminating 0 follow the images, one by
 197  *      one, all aligned on "uint32_t" boundaries (size rounded up to
 198  *      a multiple of 4 bytes - except for the last file).
 199  *
 200  * "Firmware Images" are binary images containing firmware (like
 201  *      U-Boot or FPGA images) which usually will be programmed to
 202  *      flash memory.
 203  *
 204  * "Script files" are command sequences that will be executed by
 205  *      U-Boot's command interpreter; this feature is especially
 206  *      useful when you configure U-Boot to use a real shell (hush)
 207  *      as command interpreter (=> Shell Scripts).
 208  */
 209
 210 #define IH_TYPE_INVALID         0       /* Invalid Image                */
 211 #define IH_TYPE_STANDALONE      1       /* Standalone Program           */
 212 #define IH_TYPE_KERNEL          2       /* OS Kernel Image              */
 213 #define IH_TYPE_RAMDISK         3       /* RAMDisk Image                */
 214 #define IH_TYPE_MULTI           4       /* Multi-File Image             */
 215 #define IH_TYPE_FIRMWARE        5       /* Firmware Image               */
 216 #define IH_TYPE_SCRIPT          6       /* Script file                  */
 217 #define IH_TYPE_FILESYSTEM      7       /* Filesystem Image (any type)  */
 218 #define IH_TYPE_FLATDT          8       /* Binary Flat Device Tree Blob */
 219 #define IH_TYPE_KWBIMAGE        9       /* Kirkwood Boot Image          */
 220 #define IH_TYPE_IMXIMAGE        10      /* Freescale IMXBoot Image      */
 221 #define IH_TYPE_UBLIMAGE        11      /* Davinci UBL Image            */
 222 #define IH_TYPE_OMAPIMAGE       12      /* TI OMAP Config Header Image  */
 223 #define IH_TYPE_AISIMAGE        13      /* TI Davinci AIS Image         */
 224 #define IH_TYPE_KERNEL_NOLOAD   14      /* OS Kernel Image, can run from any load address */
 225 #define IH_TYPE_PBLIMAGE        15      /* Freescale PBL Boot Image     */
 226 #define IH_TYPE_MXSIMAGE        16      /* Freescale MXSBoot Image      */
 227 #define IH_TYPE_GPIMAGE         17      /* TI Keystone GPHeader Image   */
 228 #define IH_TYPE_ATMELIMAGE      18      /* ATMEL ROM bootable Image     */
 229
 230 /*
 231  * Compression Types
 232  */
 233 #define IH_COMP_NONE            0       /*  No   Compression Used       */
 234 #define IH_COMP_GZIP            1       /* gzip  Compression Used       */
 235 #define IH_COMP_BZIP2           2       /* bzip2 Compression Used       */
 236 #define IH_COMP_LZMA            3       /* lzma  Compression Used       */
 237 #define IH_COMP_LZO             4       /* lzo   Compression Used       */
 238
 239 #define IH_MAGIC        0x27051956      /* Image Magic Number           */
 240 #define IH_NMLEN                32      /* Image Name Length            */
 241
 242 /* Reused from common.h */
 243 #define ROUND(a, b)             (((a) + (b) - 1) & ~((b) - 1))
 244
 245 /*
 246  * Legacy format image header,
 247  * all data in network byte order (aka natural aka bigendian).
 248  */
 249 typedef struct image_header {
 250         __be32          ih_magic;       /* Image Header Magic Number    */
 251         __be32          ih_hcrc;        /* Image Header CRC Checksum    */
 252         __be32          ih_time;        /* Image Creation Timestamp     */
 253         __be32          ih_size;        /* Image Data Size              */
 254         __be32          ih_load;        /* Data  Load  Address          */
 255         __be32          ih_ep;          /* Entry Point Address          */
 256         __be32          ih_dcrc;        /* Image Data CRC Checksum      */
 257         uint8_t         ih_os;          /* Operating System             */
 258         uint8_t         ih_arch;        /* CPU architecture             */
 259         uint8_t         ih_type;        /* Image Type                   */
 260         uint8_t         ih_comp;        /* Compression Type             */
 261         uint8_t         ih_name[IH_NMLEN];      /* Image Name           */
 262 } image_header_t;
 263
 264 typedef struct image_info {
 265         ulong           start, end;             /* start/end of blob */
 266         ulong           image_start, image_len; /* start of image within blob, len of image */
 267         ulong           load;                   /* load addr for the image */
 268         uint8_t         comp, type, os;         /* compression, type of image, os type */
 269 } image_info_t;
 270
 271 /*
 272  * Legacy and FIT format headers used by do_bootm() and do_bootm_<os>()
 273  * routines.
 274  */
 275 typedef struct bootm_headers {
 276         /*
 277          * Legacy os image header, if it is a multi component image
 278          * then boot_get_ramdisk() and get_fdt() will attempt to get
 279          * data from second and third component accordingly.
 280          */
 281         image_header_t  *legacy_hdr_os;         /* image header pointer */
 282         image_header_t  legacy_hdr_os_copy;     /* header copy */
 283         ulong           legacy_hdr_valid;
 284
 285 #if defined(CONFIG_FIT)
 286         const char      *fit_uname_cfg; /* configuration node unit name */
 287
 288         void            *fit_hdr_os;    /* os FIT image header */
 289         const char      *fit_uname_os;  /* os subimage node unit name */
 290         int             fit_noffset_os; /* os subimage node offset */
 291
 292         void            *fit_hdr_rd;    /* init ramdisk FIT image header */
 293         const char      *fit_uname_rd;  /* init ramdisk subimage node unit name */
 294         int             fit_noffset_rd; /* init ramdisk subimage node offset */
 295
 296         void            *fit_hdr_fdt;   /* FDT blob FIT image header */
 297         const char      *fit_uname_fdt; /* FDT blob subimage node unit name */
 298         int             fit_noffset_fdt;/* FDT blob subimage node offset */
 299 #endif
 300
 301 #ifndef USE_HOSTCC
 302         image_info_t    os;             /* os image info */
 303         ulong           ep;             /* entry point of OS */
 304
 305         ulong           rd_start, rd_end;/* ramdisk start/end */
 306
 307         char            *ft_addr;       /* flat dev tree address */
 308         ulong           ft_len;         /* length of flat device tree */
 309
 310         ulong           initrd_start;
 311         ulong           initrd_end;
 312         ulong           cmdline_start;
 313         ulong           cmdline_end;
 314         bd_t            *kbd;
 315 #endif
 316
 317         int             verify;         /* getenv("verify")[0] != 'n' */
 318
 319 #define BOOTM_STATE_START       (0x00000001)
 320 #define BOOTM_STATE_FINDOS      (0x00000002)
 321 #define BOOTM_STATE_FINDOTHER   (0x00000004)
 322 #define BOOTM_STATE_LOADOS      (0x00000008)
 323 #define BOOTM_STATE_RAMDISK     (0x00000010)
 324 #define BOOTM_STATE_FDT         (0x00000020)
 325 #define BOOTM_STATE_OS_CMDLINE  (0x00000040)
 326 #define BOOTM_STATE_OS_BD_T     (0x00000080)
 327 #define BOOTM_STATE_OS_PREP     (0x00000100)
 328 #define BOOTM_STATE_OS_FAKE_GO  (0x00000200)    /* 'Almost' run the OS */
 329 #define BOOTM_STATE_OS_GO       (0x00000400)
 330         int             state;
 331
 332 #ifdef CONFIG_LMB
 333         struct lmb      lmb;            /* for memory mgmt */
 334 #endif
 335 } bootm_headers_t;
 336
 337 extern bootm_headers_t images;
 338
 339 /*
 340  * Some systems (for example LWMON) have very short watchdog periods;
 341  * we must make sure to split long operations like memmove() or
 342  * checksum calculations into reasonable chunks.
 343  */
 344 #ifndef CHUNKSZ
 345 #define CHUNKSZ (64 * 1024)
 346 #endif
 347
 348 #ifndef CHUNKSZ_CRC32
 349 #define CHUNKSZ_CRC32 (64 * 1024)
 350 #endif
 351
 352 #ifndef CHUNKSZ_MD5
 353 #define CHUNKSZ_MD5 (64 * 1024)
 354 #endif
 355
 356 #ifndef CHUNKSZ_SHA1
 357 #define CHUNKSZ_SHA1 (64 * 1024)
 358 #endif
 359
 360 #define uimage_to_cpu(x)                be32_to_cpu(x)
 361 #define cpu_to_uimage(x)                cpu_to_be32(x)
 362
 363 /*
 364  * Translation table for entries of a specific type; used by
 365  * get_table_entry_id() and get_table_entry_name().
 366  */
 367 typedef struct table_entry {
 368         int     id;
 369         char    *sname;         /* short (input) name to find table entry */
 370         char    *lname;         /* long (output) name to print for messages */
 371 } table_entry_t;
 372
 373 /*
 374  * get_table_entry_id() scans the translation table trying to find an
 375  * entry that matches the given short name. If a matching entry is
 376  * found, it's id is returned to the caller.
 377  */
 378 int get_table_entry_id(const table_entry_t *table,
 379                 const char *table_name, const char *name);
 380 /*
 381  * get_table_entry_name() scans the translation table trying to find
 382  * an entry that matches the given id. If a matching entry is found,
 383  * its long name is returned to the caller.
 384  */
 385 char *get_table_entry_name(const table_entry_t *table, char *msg, int id);
 386
 387 const char *genimg_get_os_name(uint8_t os);
 388 const char *genimg_get_arch_name(uint8_t arch);
 389 const char *genimg_get_type_name(uint8_t type);
 390 const char *genimg_get_comp_name(uint8_t comp);
 391 int genimg_get_os_id(const char *name);
 392 int genimg_get_arch_id(const char *name);
 393 int genimg_get_type_id(const char *name);
 394 int genimg_get_comp_id(const char *name);
 395 void genimg_print_size(uint32_t size);
 396
 397 #if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || \
 398         defined(USE_HOSTCC)
 399 #define IMAGE_ENABLE_TIMESTAMP 1
 400 #else
 401 #define IMAGE_ENABLE_TIMESTAMP 0
 402 #endif
 403 void genimg_print_time(time_t timestamp);
 404
 405 /* What to do with a image load address ('load = <> 'in the FIT) */
 406 enum fit_load_op {
 407         FIT_LOAD_IGNORED,       /* Ignore load address */
 408         FIT_LOAD_OPTIONAL,      /* Can be provided, but optional */
 409         FIT_LOAD_REQUIRED,      /* Must be provided */
 410 };
 411
 412 #ifndef USE_HOSTCC
 413 /* Image format types, returned by _get_format() routine */
 414 #define IMAGE_FORMAT_INVALID    0x00
 415 #define IMAGE_FORMAT_LEGACY     0x01    /* legacy image_header based format */
 416 #define IMAGE_FORMAT_FIT        0x02    /* new, libfdt based format */
 417 #define IMAGE_FORMAT_ANDROID    0x03    /* Android boot image */
 418
 419 int genimg_get_format(const void *img_addr);
 420 int genimg_has_config(bootm_headers_t *images);
 421 ulong genimg_get_image(ulong img_addr);
 422
 423 int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,
 424                 uint8_t arch, ulong *rd_start, ulong *rd_end);
 425
 426 /**
 427  * fit_image_load() - load an image from a FIT
 428  *
 429  * This deals with all aspects of loading an image from a FIT, including
 430  * selecting the right image based on configuration, verifying it, printing
 431  * out progress messages, checking the type/arch/os and optionally copying it
 432  * to the right load address.
 433  *
 434  * @param images        Boot images structure
 435  * @param prop_name     Property name to look up (FIT_..._PROP)
 436  * @param addr          Address of FIT in memory
 437  * @param fit_unamep    On entry this is the requested image name
 438  *                      (e.g. "kernel@1") or NULL to use the default. On exit
 439  *                      points to the selected image name
 440  * @param fit_uname_configp     On entry this is the requested configuration
 441  *                      name (e.g. "conf@1") or NULL to use the default. On
 442  *                      exit points to the selected configuration name.
 443  * @param arch          Expected architecture (IH_ARCH_...)
 444  * @param image_type    Required image type (IH_TYPE_...). If this is
 445  *                      IH_TYPE_KERNEL then we allow IH_TYPE_KERNEL_NOLOAD
 446  *                      also.
 447  * @param bootstage_id  ID of starting bootstage to use for progress updates.
 448  *                      This will be added to the BOOTSTAGE_SUB values when
 449  *                      calling bootstage_mark()
 450  * @param load_op       Decribes what to do with the load address
 451  * @param datap         Returns address of loaded image
 452  * @param lenp          Returns length of loaded image
 453  */
 454 int fit_image_load(bootm_headers_t *images, const char *prop_name, ulong addr,
 455                    const char **fit_unamep, const char **fit_uname_configp,
 456                    int arch, int image_type, int bootstage_id,
 457                    enum fit_load_op load_op, ulong *datap, ulong *lenp);
 458
 459 /**
 460  * fit_get_node_from_config() - Look up an image a FIT by type
 461  *
 462  * This looks in the selected conf@ node (images->fit_uname_cfg) for a
 463  * particular image type (e.g. "kernel") and then finds the image that is
 464  * referred to.
 465  *
 466  * For example, for something like:
 467  *
 468  * images {
 469  *      kernel@1 {
 470  *              ...
 471  *      };
 472  * };
 473  * configurations {
 474  *      conf@1 {
 475  *              kernel = "kernel@1";
 476  *      };
 477  * };
 478  *
 479  * the function will return the node offset of the kernel@1 node, assuming
 480  * that conf@1 is the chosen configuration.
 481  *
 482  * @param images        Boot images structure
 483  * @param prop_name     Property name to look up (FIT_..._PROP)
 484  * @param addr          Address of FIT in memory
 485  */
 486 int fit_get_node_from_config(bootm_headers_t *images, const char *prop_name,
 487                         ulong addr);
 488
 489 int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch,
 490                  bootm_headers_t *images,
 491                  char **of_flat_tree, ulong *of_size);
 492 void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob);
 493 int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size);
 494
 495 int boot_ramdisk_high(struct lmb *lmb, ulong rd_data, ulong rd_len,
 496                   ulong *initrd_start, ulong *initrd_end);
 497 int boot_get_cmdline(struct lmb *lmb, ulong *cmd_start, ulong *cmd_end);
 498 #ifdef CONFIG_SYS_BOOT_GET_KBD
 499 int boot_get_kbd(struct lmb *lmb, bd_t **kbd);
 500 #endif /* CONFIG_SYS_BOOT_GET_KBD */
 501 #endif /* !USE_HOSTCC */
 502
 503 /*******************************************************************/
 504 /* Legacy format specific code (prefixed with image_) */
 505 /*******************************************************************/
 506 static inline uint32_t image_get_header_size(void)
 507 {
 508         return (sizeof(image_header_t));
 509 }
 510
 511 #define image_get_hdr_l(f) \
 512         static inline uint32_t image_get_##f(const image_header_t *hdr) \
 513         { \
 514                 return uimage_to_cpu(hdr->ih_##f); \
 515         }
 516 image_get_hdr_l(magic)          /* image_get_magic */
 517 image_get_hdr_l(hcrc)           /* image_get_hcrc */
 518 image_get_hdr_l(time)           /* image_get_time */
 519 image_get_hdr_l(size)           /* image_get_size */
 520 image_get_hdr_l(load)           /* image_get_load */
 521 image_get_hdr_l(ep)             /* image_get_ep */
 522 image_get_hdr_l(dcrc)           /* image_get_dcrc */
 523
 524 #define image_get_hdr_b(f) \
 525         static inline uint8_t image_get_##f(const image_header_t *hdr) \
 526         { \
 527                 return hdr->ih_##f; \
 528         }
 529 image_get_hdr_b(os)             /* image_get_os */
 530 image_get_hdr_b(arch)           /* image_get_arch */
 531 image_get_hdr_b(type)           /* image_get_type */
 532 image_get_hdr_b(comp)           /* image_get_comp */
 533
 534 static inline char *image_get_name(const image_header_t *hdr)
 535 {
 536         return (char *)hdr->ih_name;
 537 }
 538
 539 static inline uint32_t image_get_data_size(const image_header_t *hdr)
 540 {
 541         return image_get_size(hdr);
 542 }
 543
 544 /**
 545  * image_get_data - get image payload start address
 546  * @hdr: image header
 547  *
 548  * image_get_data() returns address of the image payload. For single
 549  * component images it is image data start. For multi component
 550  * images it points to the null terminated table of sub-images sizes.
 551  *
 552  * returns:
 553  *     image payload data start address
 554  */
 555 static inline ulong image_get_data(const image_header_t *hdr)
 556 {
 557         return ((ulong)hdr + image_get_header_size());
 558 }
 559
 560 static inline uint32_t image_get_image_size(const image_header_t *hdr)
 561 {
 562         return (image_get_size(hdr) + image_get_header_size());
 563 }
 564 static inline ulong image_get_image_end(const image_header_t *hdr)
 565 {
 566         return ((ulong)hdr + image_get_image_size(hdr));
 567 }
 568
 569 #define image_set_hdr_l(f) \
 570         static inline void image_set_##f(image_header_t *hdr, uint32_t val) \
 571         { \
 572                 hdr->ih_##f = cpu_to_uimage(val); \
 573         }
 574 image_set_hdr_l(magic)          /* image_set_magic */
 575 image_set_hdr_l(hcrc)           /* image_set_hcrc */
 576 image_set_hdr_l(time)           /* image_set_time */
 577 image_set_hdr_l(size)           /* image_set_size */
 578 image_set_hdr_l(load)           /* image_set_load */
 579 image_set_hdr_l(ep)             /* image_set_ep */
 580 image_set_hdr_l(dcrc)           /* image_set_dcrc */
 581
 582 #define image_set_hdr_b(f) \
 583         static inline void image_set_##f(image_header_t *hdr, uint8_t val) \
 584         { \
 585                 hdr->ih_##f = val; \
 586         }
 587 image_set_hdr_b(os)             /* image_set_os */
 588 image_set_hdr_b(arch)           /* image_set_arch */
 589 image_set_hdr_b(type)           /* image_set_type */
 590 image_set_hdr_b(comp)           /* image_set_comp */
 591
 592 static inline void image_set_name(image_header_t *hdr, const char *name)
 593 {
 594         strncpy(image_get_name(hdr), name, IH_NMLEN);
 595 }
 596
 597 int image_check_hcrc(const image_header_t *hdr);
 598 int image_check_dcrc(const image_header_t *hdr);
 599 #ifndef USE_HOSTCC
 600 ulong getenv_bootm_low(void);
 601 phys_size_t getenv_bootm_size(void);
 602 phys_size_t getenv_bootm_mapsize(void);
 603 void memmove_wd(void *to, void *from, size_t len, ulong chunksz);
 604 #endif
 605
 606 static inline int image_check_magic(const image_header_t *hdr)
 607 {
 608         return (image_get_magic(hdr) == IH_MAGIC);
 609 }
 610 static inline int image_check_type(const image_header_t *hdr, uint8_t type)
 611 {
 612         return (image_get_type(hdr) == type);
 613 }
 614 static inline int image_check_arch(const image_header_t *hdr, uint8_t arch)
 615 {
 616         return (image_get_arch(hdr) == arch);
 617 }
 618 static inline int image_check_os(const image_header_t *hdr, uint8_t os)
 619 {
 620         return (image_get_os(hdr) == os);
 621 }
 622
 623 ulong image_multi_count(const image_header_t *hdr);
 624 void image_multi_getimg(const image_header_t *hdr, ulong idx,
 625                         ulong *data, ulong *len);
 626
 627 void image_print_contents(const void *hdr);
 628
 629 #ifndef USE_HOSTCC
 630 static inline int image_check_target_arch(const image_header_t *hdr)
 631 {
 632 #ifndef IH_ARCH_DEFAULT
 633 # error "please define IH_ARCH_DEFAULT in your arch asm/u-boot.h"
 634 #endif
 635         return image_check_arch(hdr, IH_ARCH_DEFAULT);
 636 }
 637 #endif /* USE_HOSTCC */
 638
 639 /**
 640  * Set up properties in the FDT
 641  *
 642  * This sets up properties in the FDT that is to be passed to linux.
 643  *
 644  * @images:     Images information
 645  * @blob:       FDT to update
 646  * @of_size:    Size of the FDT
 647  * @lmb:        Points to logical memory block structure
 648  * @return 0 if ok, <0 on failure
 649  */
 650 int image_setup_libfdt(bootm_headers_t *images, void *blob,
 651                        int of_size, struct lmb *lmb);
 652
 653 /**
 654  * Set up the FDT to use for booting a kernel
 655  *
 656  * This performs ramdisk setup, sets up the FDT if required, and adds
 657  * paramters to the FDT if libfdt is available.
 658  *
 659  * @param images        Images information
 660  * @return 0 if ok, <0 on failure
 661  */
 662 int image_setup_linux(bootm_headers_t *images);
 663
 664 /**
 665  * bootz_setup() - Extract stat and size of a Linux xImage
 666  *
 667  * @image: Address of image
 668  * @start: Returns start address of image
 669  * @end : Returns end address of image
 670  * @return 0 if OK, 1 if the image was not recognised
 671  */
 672 int bootz_setup(ulong image, ulong *start, ulong *end);
 673
 674
 675 /*******************************************************************/
 676 /* New uImage format specific code (prefixed with fit_) */
 677 /*******************************************************************/
 678 #if defined(CONFIG_FIT)
 679
 680 #define FIT_IMAGES_PATH         "/images"
 681 #define FIT_CONFS_PATH          "/configurations"
 682
 683 /* hash/signature node */
 684 #define FIT_HASH_NODENAME       "hash"
 685 #define FIT_ALGO_PROP           "algo"
 686 #define FIT_VALUE_PROP          "value"
 687 #define FIT_IGNORE_PROP         "uboot-ignore"
 688 #define FIT_SIG_NODENAME        "signature"
 689
 690 /* image node */
 691 #define FIT_DATA_PROP           "data"
 692 #define FIT_TIMESTAMP_PROP      "timestamp"
 693 #define FIT_DESC_PROP           "description"
 694 #define FIT_ARCH_PROP           "arch"
 695 #define FIT_TYPE_PROP           "type"
 696 #define FIT_OS_PROP             "os"
 697 #define FIT_COMP_PROP           "compression"
 698 #define FIT_ENTRY_PROP          "entry"
 699 #define FIT_LOAD_PROP           "load"
 700
 701 /* configuration node */
 702 #define FIT_KERNEL_PROP         "kernel"
 703 #define FIT_RAMDISK_PROP        "ramdisk"
 704 #define FIT_FDT_PROP            "fdt"
 705 #define FIT_DEFAULT_PROP        "default"
 706
 707 #define FIT_MAX_HASH_LEN        20      /* max(crc32_len(4), sha1_len(20)) */
 708
 709 /* cmdline argument format parsing */
 710 int fit_parse_conf(const char *spec, ulong addr_curr,
 711                 ulong *addr, const char **conf_name);
 712 int fit_parse_subimage(const char *spec, ulong addr_curr,
 713                 ulong *addr, const char **image_name);
 714
 715 void fit_print_contents(const void *fit);
 716 void fit_image_print(const void *fit, int noffset, const char *p);
 717
 718 /**
 719  * fit_get_end - get FIT image size
 720  * @fit: pointer to the FIT format image header
 721  *
 722  * returns:
 723  *     size of the FIT image (blob) in memory
 724  */
 725 static inline ulong fit_get_size(const void *fit)
 726 {
 727         return fdt_totalsize(fit);
 728 }
 729
 730 /**
 731  * fit_get_end - get FIT image end
 732  * @fit: pointer to the FIT format image header
 733  *
 734  * returns:
 735  *     end address of the FIT image (blob) in memory
 736  */
 737 static inline ulong fit_get_end(const void *fit)
 738 {
 739         return (ulong)fit + fdt_totalsize(fit);
 740 }
 741
 742 /**
 743  * fit_get_name - get FIT node name
 744  * @fit: pointer to the FIT format image header
 745  *
 746  * returns:
 747  *     NULL, on error
 748  *     pointer to node name, on success
 749  */
 750 static inline const char *fit_get_name(const void *fit_hdr,
 751                 int noffset, int *len)
 752 {
 753         return fdt_get_name(fit_hdr, noffset, len);
 754 }
 755
 756 int fit_get_desc(const void *fit, int noffset, char **desc);
 757 int fit_get_timestamp(const void *fit, int noffset, time_t *timestamp);
 758
 759 int fit_image_get_node(const void *fit, const char *image_uname);
 760 int fit_image_get_os(const void *fit, int noffset, uint8_t *os);
 761 int fit_image_get_arch(const void *fit, int noffset, uint8_t *arch);
 762 int fit_image_get_type(const void *fit, int noffset, uint8_t *type);
 763 int fit_image_get_comp(const void *fit, int noffset, uint8_t *comp);
 764 int fit_image_get_load(const void *fit, int noffset, ulong *load);
 765 int fit_image_get_entry(const void *fit, int noffset, ulong *entry);
 766 int fit_image_get_data(const void *fit, int noffset,
 767                                 const void **data, size_t *size);
 768
 769 int fit_image_hash_get_algo(const void *fit, int noffset, char **algo);
 770 int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value,
 771                                 int *value_len);
 772
 773 int fit_set_timestamp(void *fit, int noffset, time_t timestamp);
 774
 775 /**
 776  * fit_add_verification_data() - add verification data to FIT image nodes
 777  *
 778  * @keydir:     Directory containing keys
 779  * @kwydest:    FDT blob to write public key information to
 780  * @fit:        Pointer to the FIT format image header
 781  * @comment:    Comment to add to signature nodes
 782  * @require_keys: Mark all keys as 'required'
 783  *
 784  * Adds hash values for all component images in the FIT blob.
 785  * Hashes are calculated for all component images which have hash subnodes
 786  * with algorithm property set to one of the supported hash algorithms.
 787  *
 788  * Also add signatures if signature nodes are present.
 789  *
 790  * returns
 791  *     0, on success
 792  *     libfdt error code, on failure
 793  */
 794 int fit_add_verification_data(const char *keydir, void *keydest, void *fit,
 795                               const char *comment, int require_keys);
 796
 797 int fit_image_verify(const void *fit, int noffset);
 798 int fit_config_verify(const void *fit, int conf_noffset);
 799 int fit_all_image_verify(const void *fit);
 800 int fit_image_check_os(const void *fit, int noffset, uint8_t os);
 801 int fit_image_check_arch(const void *fit, int noffset, uint8_t arch);
 802 int fit_image_check_type(const void *fit, int noffset, uint8_t type);
 803 int fit_image_check_comp(const void *fit, int noffset, uint8_t comp);
 804 int fit_check_format(const void *fit);
 805
 806 int fit_conf_find_compat(const void *fit, const void *fdt);
 807 int fit_conf_get_node(const void *fit, const char *conf_uname);
 808
 809 /**
 810  * fit_conf_get_prop_node() - Get node refered to by a configuration
 811  * @fit:        FIT to check
 812  * @noffset:    Offset of conf@xxx node to check
 813  * @prop_name:  Property to read from the conf node
 814  *
 815  * The conf@ nodes contain references to other nodes, using properties
 816  * like 'kernel = "kernel@1"'. Given such a property name (e.g. "kernel"),
 817  * return the offset of the node referred to (e.g. offset of node
 818  * "/images/kernel@1".
 819  */
 820 int fit_conf_get_prop_node(const void *fit, int noffset,
 821                 const char *prop_name);
 822
 823 void fit_conf_print(const void *fit, int noffset, const char *p);
 824
 825 int fit_check_ramdisk(const void *fit, int os_noffset,
 826                 uint8_t arch, int verify);
 827
 828 int calculate_hash(const void *data, int data_len, const char *algo,
 829                         uint8_t *value, int *value_len);
 830
 831 /*
 832  * At present we only support signing on the host, and verification on the
 833  * device
 834  */
 835 #if defined(CONFIG_FIT_SIGNATURE)
 836 # ifdef USE_HOSTCC
 837 #  define IMAGE_ENABLE_SIGN     1
 838 #  define IMAGE_ENABLE_VERIFY   1
 839 # include  <openssl/evp.h>
 840 #else
 841 #  define IMAGE_ENABLE_SIGN     0
 842 #  define IMAGE_ENABLE_VERIFY   1
 843 # endif
 844 #else
 845 # define IMAGE_ENABLE_SIGN      0
 846 # define IMAGE_ENABLE_VERIFY    0
 847 #endif
 848
 849 #ifdef USE_HOSTCC
 850 void *image_get_host_blob(void);
 851 void image_set_host_blob(void *host_blob);
 852 # define gd_fdt_blob()          image_get_host_blob()
 853 #else
 854 # define gd_fdt_blob()          (gd->fdt_blob)
 855 #endif
 856
 857 #ifdef CONFIG_FIT_BEST_MATCH
 858 #define IMAGE_ENABLE_BEST_MATCH 1
 859 #else
 860 #define IMAGE_ENABLE_BEST_MATCH 0
 861 #endif
 862
 863 /* Information passed to the signing routines */
 864 struct image_sign_info {
 865         const char *keydir;             /* Directory conaining keys */
 866         const char *keyname;            /* Name of key to use */
 867         void *fit;                      /* Pointer to FIT blob */
 868         int node_offset;                /* Offset of signature node */
 869         struct image_sig_algo *algo;    /* Algorithm information */
 870         const void *fdt_blob;           /* FDT containing public keys */
 871         int required_keynode;           /* Node offset of key to use: -1=any */
 872         const char *require_keys;       /* Value for 'required' property */
 873 };
 874
 875 /* A part of an image, used for hashing */
 876 struct image_region {
 877         const void *data;
 878         int size;
 879 };
 880
 881 #if IMAGE_ENABLE_VERIFY
 882 # include <rsa-checksum.h>
 883 #endif
 884 struct checksum_algo {
 885         const char *name;
 886         const int checksum_len;
 887         const int pad_len;
 888 #if IMAGE_ENABLE_SIGN
 889         const EVP_MD *(*calculate_sign)(void);
 890 #endif
 891         void (*calculate)(const struct image_region region[],
 892                           int region_count, uint8_t *checksum);
 893         const uint8_t *rsa_padding;
 894 };
 895
 896 struct image_sig_algo {
 897         const char *name;               /* Name of algorithm */
 898
 899         /**
 900          * sign() - calculate and return signature for given input data
 901          *
 902          * @info:       Specifies key and FIT information
 903          * @data:       Pointer to the input data
 904          * @data_len:   Data length
 905          * @sigp:       Set to an allocated buffer holding the signature
 906          * @sig_len:    Set to length of the calculated hash
 907          *
 908          * This computes input data signature according to selected algorithm.
 909          * Resulting signature value is placed in an allocated buffer, the
 910          * pointer is returned as *sigp. The length of the calculated
 911          * signature is returned via the sig_len pointer argument. The caller
 912          * should free *sigp.
 913          *
 914          * @return: 0, on success, -ve on error
 915          */
 916         int (*sign)(struct image_sign_info *info,
 917                     const struct image_region region[],
 918                     int region_count, uint8_t **sigp, uint *sig_len);
 919
 920         /**
 921          * add_verify_data() - Add verification information to FDT
 922          *
 923          * Add public key information to the FDT node, suitable for
 924          * verification at run-time. The information added depends on the
 925          * algorithm being used.
 926          *
 927          * @info:       Specifies key and FIT information
 928          * @keydest:    Destination FDT blob for public key data
 929          * @return: 0, on success, -ve on error
 930          */
 931         int (*add_verify_data)(struct image_sign_info *info, void *keydest);
 932
 933         /**
 934          * verify() - Verify a signature against some data
 935          *
 936          * @info:       Specifies key and FIT information
 937          * @data:       Pointer to the input data
 938          * @data_len:   Data length
 939          * @sig:        Signature
 940          * @sig_len:    Number of bytes in signature
 941          * @return 0 if verified, -ve on error
 942          */
 943         int (*verify)(struct image_sign_info *info,
 944                       const struct image_region region[], int region_count,
 945                       uint8_t *sig, uint sig_len);
 946
 947         /* pointer to checksum algorithm */
 948         struct checksum_algo *checksum;
 949 };
 950
 951 /**
 952  * image_get_sig_algo() - Look up a signature algortihm
 953  *
 954  * @param name          Name of algorithm
 955  * @return pointer to algorithm information, or NULL if not found
 956  */
 957 struct image_sig_algo *image_get_sig_algo(const char *name);
 958
 959 /**
 960  * fit_image_verify_required_sigs() - Verify signatures marked as 'required'
 961  *
 962  * @fit:                FIT to check
 963  * @image_noffset:      Offset of image node to check
 964  * @data:               Image data to check
 965  * @size:               Size of image data
 966  * @sig_blob:           FDT containing public keys
 967  * @no_sigsp:           Returns 1 if no signatures were required, and
 968  *                      therefore nothing was checked. The caller may wish
 969  *                      to fall back to other mechanisms, or refuse to
 970  *                      boot.
 971  * @return 0 if all verified ok, <0 on error
 972  */
 973 int fit_image_verify_required_sigs(const void *fit, int image_noffset,
 974                 const char *data, size_t size, const void *sig_blob,
 975                 int *no_sigsp);
 976
 977 /**
 978  * fit_image_check_sig() - Check a single image signature node
 979  *
 980  * @fit:                FIT to check
 981  * @noffset:            Offset of signature node to check
 982  * @data:               Image data to check
 983  * @size:               Size of image data
 984  * @required_keynode:   Offset in the control FDT of the required key node,
 985  *                      if any. If this is given, then the image wil not
 986  *                      pass verification unless that key is used. If this is
 987  *                      -1 then any signature will do.
 988  * @err_msgp:           In the event of an error, this will be pointed to a
 989  *                      help error string to display to the user.
 990  * @return 0 if all verified ok, <0 on error
 991  */
 992 int fit_image_check_sig(const void *fit, int noffset, const void *data,
 993                 size_t size, int required_keynode, char **err_msgp);
 994
 995 /**
 996  * fit_region_make_list() - Make a list of regions to hash
 997  *
 998  * Given a list of FIT regions (offset, size) provided by libfdt, create
 999  * a list of regions (void *, size) for use by the signature creationg
1000  * and verification code.
1001  *
1002  * @fit:                FIT image to process
1003  * @fdt_regions:        Regions as returned by libfdt
1004  * @count:              Number of regions returned by libfdt
1005  * @region:             Place to put list of regions (NULL to allocate it)
1006  * @return pointer to list of regions, or NULL if out of memory
1007  */
1008 struct image_region *fit_region_make_list(const void *fit,
1009                 struct fdt_region *fdt_regions, int count,
1010                 struct image_region *region);
1011
1012 static inline int fit_image_check_target_arch(const void *fdt, int node)
1013 {
1014 #ifndef USE_HOSTCC
1015         return fit_image_check_arch(fdt, node, IH_ARCH_DEFAULT);
1016 #else
1017         return 0;
1018 #endif
1019 }
1020
1021 #ifdef CONFIG_FIT_VERBOSE
1022 #define fit_unsupported(msg)    printf("! %s:%d " \
1023                                 "FIT images not supported for '%s'\n", \
1024                                 __FILE__, __LINE__, (msg))
1025
1026 #define fit_unsupported_reset(msg)      printf("! %s:%d " \
1027                                 "FIT images not supported for '%s' " \
1028                                 "- must reset board to recover!\n", \
1029                                 __FILE__, __LINE__, (msg))
1030 #else
1031 #define fit_unsupported(msg)
1032 #define fit_unsupported_reset(msg)
1033 #endif /* CONFIG_FIT_VERBOSE */
1034 #endif /* CONFIG_FIT */
1035
1036 #if defined(CONFIG_ANDROID_BOOT_IMAGE)
1037 struct andr_img_hdr;
1038 int android_image_check_header(const struct andr_img_hdr *hdr);
1039 int android_image_get_kernel(const struct andr_img_hdr *hdr, int verify,
1040                              ulong *os_data, ulong *os_len);
1041 int android_image_get_ramdisk(const struct andr_img_hdr *hdr,
1042                               ulong *rd_data, ulong *rd_len);
1043 ulong android_image_get_end(const struct andr_img_hdr *hdr);
1044 ulong android_image_get_kload(const struct andr_img_hdr *hdr);
1045
1046 #endif /* CONFIG_ANDROID_BOOT_IMAGE */
1047
1048 #endif  /* __IMAGE_H__ */