include/init.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2000-2009
   4  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   5  *
   6  * Copy the startup prototype, previously defined in common.h
   7  * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
   8  */
   9
  10 #ifndef __INIT_H_
  11 #define __INIT_H_       1
  12
  13 #ifndef __ASSEMBLY__            /* put C only stuff in this section */
  14
  15 /*
  16  * Function Prototypes
  17  */
  18
  19 /* common/board_f.c */
  20 void board_init_f(ulong dummy);
  21
  22 /**
  23  * arch_cpu_init() - basic cpu-dependent setup for an architecture
  24  *
  25  * This is called after early malloc is available. It should handle any
  26  * CPU- or SoC- specific init needed to continue the init sequence. See
  27  * board_f.c for where it is called. If this is not provided, a default
  28  * version (which does nothing) will be used.
  29  *
  30  * Return: 0 on success, otherwise error
  31  */
  32 int arch_cpu_init(void);
  33
  34 /**
  35  * arch_cpu_init_dm() - init CPU after driver model is available
  36  *
  37  * This is called immediately after driver model is available before
  38  * relocation. This is similar to arch_cpu_init() but is able to reference
  39  * devices
  40  *
  41  * Return: 0 if OK, -ve on error
  42  */
  43 int arch_cpu_init_dm(void);
  44
  45 /**
  46  * mach_cpu_init() - SoC/machine dependent CPU setup
  47  *
  48  * This is called after arch_cpu_init(). It should handle any
  49  * SoC or machine specific init needed to continue the init sequence. See
  50  * board_f.c for where it is called. If this is not provided, a default
  51  * version (which does nothing) will be used.
  52  *
  53  * Return: 0 on success, otherwise error
  54  */
  55 int mach_cpu_init(void);
  56
  57 /**
  58  * arch_fsp_init() - perform firmware support package init
  59  *
  60  * Where U-Boot relies on binary blobs to handle part of the system init, this
  61  * function can be used to set up the blobs. This is used on some Intel
  62  * platforms.
  63  *
  64  * Return: 0
  65  */
  66 int arch_fsp_init(void);
  67
  68 int dram_init(void);
  69
  70 /**
  71  * dram_init_banksize() - Set up DRAM bank sizes
  72  *
  73  * This can be implemented by boards to set up the DRAM bank information in
  74  * gd->bd->bi_dram(). It is called just before relocation, after dram_init()
  75  * is called.
  76  *
  77  * If this is not provided, a default implementation will try to set up a
  78  * single bank. It will do this if CONFIG_NR_DRAM_BANKS and
  79  * CONFIG_SYS_SDRAM_BASE are set. The bank will have a start address of
  80  * CONFIG_SYS_SDRAM_BASE and the size will be determined by a call to
  81  * get_effective_memsize().
  82  *
  83  * Return: 0 if OK, -ve on error
  84  */
  85 int dram_init_banksize(void);
  86
  87 /**
  88  * arch_reserve_stacks() - Reserve all necessary stacks
  89  *
  90  * This is used in generic board init sequence in common/board_f.c. Each
  91  * architecture could provide this function to tailor the required stacks.
  92  *
  93  * On entry gd->start_addr_sp is pointing to the suggested top of the stack.
  94  * The callee ensures gd->start_add_sp is 16-byte aligned, so architectures
  95  * require only this can leave it untouched.
  96  *
  97  * On exit gd->start_addr_sp and gd->irq_sp should be set to the respective
  98  * positions of the stack. The stack pointer(s) will be set to this later.
  99  * gd->irq_sp is only required, if the architecture needs it.
 100  *
 101  * Return: 0 if no error
 102  */
 103 int arch_reserve_stacks(void);
 104
 105 /**
 106  * init_cache_f_r() - Turn on the cache in preparation for relocation
 107  *
 108  * Return: 0 if OK, -ve on error
 109  */
 110 int init_cache_f_r(void);
 111
 112 int print_cpuinfo(void);
 113 int timer_init(void);
 114 int reserve_mmu(void);
 115 int misc_init_f(void);
 116
 117 #if defined(CONFIG_DTB_RESELECT)
 118 int embedded_dtb_select(void);
 119 #endif
 120
 121 /* common/init/board_init.c */
 122 extern ulong monitor_flash_len;
 123
 124 /**
 125  * ulong board_init_f_alloc_reserve - allocate reserved area
 126  * @top: top of the reserve area, growing down.
 127  *
 128  * This function is called by each architecture very early in the start-up
 129  * code to allow the C runtime to reserve space on the stack for writable
 130  * 'globals' such as GD and the malloc arena.
 131  *
 132  * Return: bottom of reserved area
 133  */
 134 ulong board_init_f_alloc_reserve(ulong top);
 135
 136 /**
 137  * board_init_f_init_reserve - initialize the reserved area(s)
 138  * @base:       top from which reservation was done
 139  *
 140  * This function is called once the C runtime has allocated the reserved
 141  * area on the stack. It must initialize the GD at the base of that area.
 142  */
 143 void board_init_f_init_reserve(ulong base);
 144
 145 /**
 146  * arch_setup_gd() - Set up the global_data pointer
 147  * @gd_ptr: Pointer to global data
 148  *
 149  * This pointer is special in some architectures and cannot easily be assigned
 150  * to. For example on x86 it is implemented by adding a specific record to its
 151  * Global Descriptor Table! So we we provide a function to carry out this task.
 152  * For most architectures this can simply be:
 153  *
 154  *    gd = gd_ptr;
 155  */
 156 void arch_setup_gd(gd_t *gd_ptr);
 157
 158 /* common/board_r.c */
 159 void board_init_r(gd_t *id, ulong dest_addr) __attribute__ ((noreturn));
 160
 161 int cpu_init_r(void);
 162 int last_stage_init(void);
 163 int mac_read_from_eeprom(void);
 164 int set_cpu_clk_info(void);
 165 int update_flash_size(int flash_size);
 166 int arch_early_init_r(void);
 167 void pci_init(void);
 168 int misc_init_r(void);
 169 #if defined(CONFIG_VID)
 170 int init_func_vid(void);
 171 #endif
 172
 173 /* common/board_info.c */
 174 int checkboard(void);
 175 int show_board_info(void);
 176
 177 #endif  /* __ASSEMBLY__ */
 178 /* Put only stuff here that the assembler can digest */
 179
 180 #endif  /* __INIT_H_ */