include/linux/usb/pd_vdo.h

   1 /* SPDX-License-Identifier: GPL-2.0-or-later */
   2 /*
   3  * Copyright 2015-2017 Google, Inc
   4  */
   5
   6 #ifndef __LINUX_USB_PD_VDO_H
   7 #define __LINUX_USB_PD_VDO_H
   8
   9 #include "pd.h"
  10
  11 /*
  12  * VDO : Vendor Defined Message Object
  13  * VDM object is minimum of VDM header + 6 additional data objects.
  14  */
  15
  16 #define VDO_MAX_OBJECTS         6
  17 #define VDO_MAX_SIZE            (VDO_MAX_OBJECTS + 1)
  18
  19 /*
  20  * VDM header
  21  * ----------
  22  * <31:16>  :: SVID
  23  * <15>     :: VDM type ( 1b == structured, 0b == unstructured )
  24  * <14:13>  :: Structured VDM version (can only be 00 == 1.0 currently)
  25  * <12:11>  :: reserved
  26  * <10:8>   :: object position (1-7 valid ... used for enter/exit mode only)
  27  * <7:6>    :: command type (SVDM only?)
  28  * <5>      :: reserved (SVDM), command type (UVDM)
  29  * <4:0>    :: command
  30  */
  31 #define VDO(vid, type, custom)                          \
  32         (((vid) << 16) |                                \
  33          ((type) << 15) |                               \
  34          ((custom) & 0x7FFF))
  35
  36 #define VDO_SVDM_TYPE           (1 << 15)
  37 #define VDO_SVDM_VERS(x)        ((x) << 13)
  38 #define VDO_OPOS(x)             ((x) << 8)
  39 #define VDO_CMDT(x)             ((x) << 6)
  40 #define VDO_OPOS_MASK           VDO_OPOS(0x7)
  41 #define VDO_CMDT_MASK           VDO_CMDT(0x3)
  42
  43 #define CMDT_INIT               0
  44 #define CMDT_RSP_ACK            1
  45 #define CMDT_RSP_NAK            2
  46 #define CMDT_RSP_BUSY           3
  47
  48 /* reserved for SVDM ... for Google UVDM */
  49 #define VDO_SRC_INITIATOR       (0 << 5)
  50 #define VDO_SRC_RESPONDER       (1 << 5)
  51
  52 #define CMD_DISCOVER_IDENT      1
  53 #define CMD_DISCOVER_SVID       2
  54 #define CMD_DISCOVER_MODES      3
  55 #define CMD_ENTER_MODE          4
  56 #define CMD_EXIT_MODE           5
  57 #define CMD_ATTENTION           6
  58
  59 #define VDO_CMD_VENDOR(x)    (((0x10 + (x)) & 0x1f))
  60
  61 /* ChromeOS specific commands */
  62 #define VDO_CMD_VERSION         VDO_CMD_VENDOR(0)
  63 #define VDO_CMD_SEND_INFO       VDO_CMD_VENDOR(1)
  64 #define VDO_CMD_READ_INFO       VDO_CMD_VENDOR(2)
  65 #define VDO_CMD_REBOOT          VDO_CMD_VENDOR(5)
  66 #define VDO_CMD_FLASH_ERASE     VDO_CMD_VENDOR(6)
  67 #define VDO_CMD_FLASH_WRITE     VDO_CMD_VENDOR(7)
  68 #define VDO_CMD_ERASE_SIG       VDO_CMD_VENDOR(8)
  69 #define VDO_CMD_PING_ENABLE     VDO_CMD_VENDOR(10)
  70 #define VDO_CMD_CURRENT         VDO_CMD_VENDOR(11)
  71 #define VDO_CMD_FLIP            VDO_CMD_VENDOR(12)
  72 #define VDO_CMD_GET_LOG         VDO_CMD_VENDOR(13)
  73 #define VDO_CMD_CCD_EN          VDO_CMD_VENDOR(14)
  74
  75 #define PD_VDO_VID(vdo)         ((vdo) >> 16)
  76 #define PD_VDO_SVDM(vdo)        (((vdo) >> 15) & 1)
  77 #define PD_VDO_OPOS(vdo)        (((vdo) >> 8) & 0x7)
  78 #define PD_VDO_CMD(vdo)         ((vdo) & 0x1f)
  79 #define PD_VDO_CMDT(vdo)        (((vdo) >> 6) & 0x3)
  80
  81 /*
  82  * SVDM Identity request -> response
  83  *
  84  * Request is simply properly formatted SVDM header
  85  *
  86  * Response is 4 data objects:
  87  * [0] :: SVDM header
  88  * [1] :: Identitiy header
  89  * [2] :: Cert Stat VDO
  90  * [3] :: (Product | Cable) VDO
  91  * [4] :: AMA VDO
  92  *
  93  */
  94 #define VDO_INDEX_HDR           0
  95 #define VDO_INDEX_IDH           1
  96 #define VDO_INDEX_CSTAT         2
  97 #define VDO_INDEX_CABLE         3
  98 #define VDO_INDEX_PRODUCT       3
  99 #define VDO_INDEX_AMA           4
 100
 101 /*
 102  * SVDM Identity Header
 103  * --------------------
 104  * <31>     :: data capable as a USB host
 105  * <30>     :: data capable as a USB device
 106  * <29:27>  :: product type
 107  * <26>     :: modal operation supported (1b == yes)
 108  * <25:16>  :: Reserved, Shall be set to zero
 109  * <15:0>   :: USB-IF assigned VID for this cable vendor
 110  */
 111 #define IDH_PTYPE_UNDEF         0
 112 #define IDH_PTYPE_HUB           1
 113 #define IDH_PTYPE_PERIPH        2
 114 #define IDH_PTYPE_PCABLE        3
 115 #define IDH_PTYPE_ACABLE        4
 116 #define IDH_PTYPE_AMA           5
 117
 118 #define VDO_IDH(usbh, usbd, ptype, is_modal, vid)               \
 119         ((usbh) << 31 | (usbd) << 30 | ((ptype) & 0x7) << 27    \
 120          | (is_modal) << 26 | ((vid) & 0xffff))
 121
 122 #define PD_IDH_PTYPE(vdo)       (((vdo) >> 27) & 0x7)
 123 #define PD_IDH_VID(vdo)         ((vdo) & 0xffff)
 124 #define PD_IDH_MODAL_SUPP(vdo)  ((vdo) & (1 << 26))
 125
 126 /*
 127  * Cert Stat VDO
 128  * -------------
 129  * <31:0>  : USB-IF assigned XID for this cable
 130  */
 131 #define PD_CSTAT_XID(vdo)       (vdo)
 132
 133 /*
 134  * Product VDO
 135  * -----------
 136  * <31:16> : USB Product ID
 137  * <15:0>  : USB bcdDevice
 138  */
 139 #define VDO_PRODUCT(pid, bcd)   (((pid) & 0xffff) << 16 | ((bcd) & 0xffff))
 140 #define PD_PRODUCT_PID(vdo)     (((vdo) >> 16) & 0xffff)
 141
 142 /*
 143  * Cable VDO
 144  * ---------
 145  * <31:28> :: Cable HW version
 146  * <27:24> :: Cable FW version
 147  * <23:20> :: Reserved, Shall be set to zero
 148  * <19:18> :: type-C to Type-A/B/C (00b == A, 01 == B, 10 == C)
 149  * <17>    :: Type-C to Plug/Receptacle (0b == plug, 1b == receptacle)
 150  * <16:13> :: cable latency (0001 == <10ns(~1m length))
 151  * <12:11> :: cable termination type (11b == both ends active VCONN req)
 152  * <10>    :: SSTX1 Directionality support (0b == fixed, 1b == cfgable)
 153  * <9>     :: SSTX2 Directionality support
 154  * <8>     :: SSRX1 Directionality support
 155  * <7>     :: SSRX2 Directionality support
 156  * <6:5>   :: Vbus current handling capability
 157  * <4>     :: Vbus through cable (0b == no, 1b == yes)
 158  * <3>     :: SOP" controller present? (0b == no, 1b == yes)
 159  * <2:0>   :: USB SS Signaling support
 160  */
 161 #define CABLE_ATYPE             0
 162 #define CABLE_BTYPE             1
 163 #define CABLE_CTYPE             2
 164 #define CABLE_PLUG              0
 165 #define CABLE_RECEPTACLE        1
 166 #define CABLE_CURR_1A5          0
 167 #define CABLE_CURR_3A           1
 168 #define CABLE_CURR_5A           2
 169 #define CABLE_USBSS_U2_ONLY     0
 170 #define CABLE_USBSS_U31_GEN1    1
 171 #define CABLE_USBSS_U31_GEN2    2
 172 #define VDO_CABLE(hw, fw, cbl, gdr, lat, term, tx1d, tx2d, rx1d, rx2d, cur,\
 173                   vps, sopp, usbss) \
 174         (((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 | ((cbl) & 0x3) << 18  \
 175          | (gdr) << 17 | ((lat) & 0x7) << 13 | ((term) & 0x3) << 11     \
 176          | (tx1d) << 10 | (tx2d) << 9 | (rx1d) << 8 | (rx2d) << 7       \
 177          | ((cur) & 0x3) << 5 | (vps) << 4 | (sopp) << 3                \
 178          | ((usbss) & 0x7))
 179
 180 /*
 181  * AMA VDO
 182  * ---------
 183  * <31:28> :: Cable HW version
 184  * <27:24> :: Cable FW version
 185  * <23:12> :: Reserved, Shall be set to zero
 186  * <11>    :: SSTX1 Directionality support (0b == fixed, 1b == cfgable)
 187  * <10>    :: SSTX2 Directionality support
 188  * <9>     :: SSRX1 Directionality support
 189  * <8>     :: SSRX2 Directionality support
 190  * <7:5>   :: Vconn power
 191  * <4>     :: Vconn power required
 192  * <3>     :: Vbus power required
 193  * <2:0>   :: USB SS Signaling support
 194  */
 195 #define VDO_AMA(hw, fw, tx1d, tx2d, rx1d, rx2d, vcpwr, vcr, vbr, usbss) \
 196         (((hw) & 0x7) << 28 | ((fw) & 0x7) << 24                        \
 197          | (tx1d) << 11 | (tx2d) << 10 | (rx1d) << 9 | (rx2d) << 8      \
 198          | ((vcpwr) & 0x7) << 5 | (vcr) << 4 | (vbr) << 3               \
 199          | ((usbss) & 0x7))
 200
 201 #define PD_VDO_AMA_VCONN_REQ(vdo)       (((vdo) >> 4) & 1)
 202 #define PD_VDO_AMA_VBUS_REQ(vdo)        (((vdo) >> 3) & 1)
 203
 204 #define AMA_VCONN_PWR_1W        0
 205 #define AMA_VCONN_PWR_1W5       1
 206 #define AMA_VCONN_PWR_2W        2
 207 #define AMA_VCONN_PWR_3W        3
 208 #define AMA_VCONN_PWR_4W        4
 209 #define AMA_VCONN_PWR_5W        5
 210 #define AMA_VCONN_PWR_6W        6
 211 #define AMA_USBSS_U2_ONLY       0
 212 #define AMA_USBSS_U31_GEN1      1
 213 #define AMA_USBSS_U31_GEN2      2
 214 #define AMA_USBSS_BBONLY        3
 215
 216 /*
 217  * SVDM Discover SVIDs request -> response
 218  *
 219  * Request is properly formatted VDM Header with discover SVIDs command.
 220  * Response is a set of SVIDs of all all supported SVIDs with all zero's to
 221  * mark the end of SVIDs.  If more than 12 SVIDs are supported command SHOULD be
 222  * repeated.
 223  */
 224 #define VDO_SVID(svid0, svid1)  (((svid0) & 0xffff) << 16 | ((svid1) & 0xffff))
 225 #define PD_VDO_SVID_SVID0(vdo)  ((vdo) >> 16)
 226 #define PD_VDO_SVID_SVID1(vdo)  ((vdo) & 0xffff)
 227
 228 /* USB-IF SIDs */
 229 #define USB_SID_PD              0xff00 /* power delivery */
 230 #define USB_SID_DISPLAYPORT     0xff01
 231 #define USB_SID_MHL             0xff02  /* Mobile High-Definition Link */
 232
 233 /* VDM command timeouts (in ms) */
 234
 235 #define PD_T_VDM_UNSTRUCTURED   500
 236 #define PD_T_VDM_BUSY           100
 237 #define PD_T_VDM_WAIT_MODE_E    100
 238 #define PD_T_VDM_SNDR_RSP       30
 239 #define PD_T_VDM_E_MODE         25
 240 #define PD_T_VDM_RCVR_RSP       15
 241
 242 #endif /* __LINUX_USB_PD_VDO_H */