]> git.ipfire.org Git - thirdparty/kernel/stable.git/blob - include/linux/usb/tcpm.h
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
[thirdparty/kernel/stable.git] / include / linux / usb / tcpm.h
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3 * Copyright 2015-2017 Google, Inc
4 */
5
6 #ifndef __LINUX_USB_TCPM_H
7 #define __LINUX_USB_TCPM_H
8
9 #include <linux/bitops.h>
10 #include <linux/usb/typec.h>
11 #include "pd.h"
12
13 enum typec_cc_status {
14 TYPEC_CC_OPEN,
15 TYPEC_CC_RA,
16 TYPEC_CC_RD,
17 TYPEC_CC_RP_DEF,
18 TYPEC_CC_RP_1_5,
19 TYPEC_CC_RP_3_0,
20 };
21
22 enum typec_cc_polarity {
23 TYPEC_POLARITY_CC1,
24 TYPEC_POLARITY_CC2,
25 };
26
27 /* Time to wait for TCPC to complete transmit */
28 #define PD_T_TCPC_TX_TIMEOUT 100 /* in ms */
29 #define PD_ROLE_SWAP_TIMEOUT (MSEC_PER_SEC * 10)
30 #define PD_PPS_CTRL_TIMEOUT (MSEC_PER_SEC * 10)
31
32 enum tcpm_transmit_status {
33 TCPC_TX_SUCCESS = 0,
34 TCPC_TX_DISCARDED = 1,
35 TCPC_TX_FAILED = 2,
36 };
37
38 enum tcpm_transmit_type {
39 TCPC_TX_SOP = 0,
40 TCPC_TX_SOP_PRIME = 1,
41 TCPC_TX_SOP_PRIME_PRIME = 2,
42 TCPC_TX_SOP_DEBUG_PRIME = 3,
43 TCPC_TX_SOP_DEBUG_PRIME_PRIME = 4,
44 TCPC_TX_HARD_RESET = 5,
45 TCPC_TX_CABLE_RESET = 6,
46 TCPC_TX_BIST_MODE_2 = 7
47 };
48
49 /**
50 * struct tcpc_config - Port configuration
51 * @src_pdo: PDO parameters sent to port partner as response to
52 * PD_CTRL_GET_SOURCE_CAP message
53 * @nr_src_pdo: Number of entries in @src_pdo
54 * @snk_pdo: PDO parameters sent to partner as response to
55 * PD_CTRL_GET_SINK_CAP message
56 * @nr_snk_pdo: Number of entries in @snk_pdo
57 * @operating_snk_mw:
58 * Required operating sink power in mW
59 * @type: Port type (TYPEC_PORT_DFP, TYPEC_PORT_UFP, or
60 * TYPEC_PORT_DRP)
61 * @default_role:
62 * Default port role (TYPEC_SINK or TYPEC_SOURCE).
63 * Set to TYPEC_NO_PREFERRED_ROLE if no default role.
64 * @try_role_hw:True if try.{Src,Snk} is implemented in hardware
65 * @alt_modes: List of supported alternate modes
66 */
67 struct tcpc_config {
68 const u32 *src_pdo;
69 unsigned int nr_src_pdo;
70
71 const u32 *snk_pdo;
72 unsigned int nr_snk_pdo;
73
74 const u32 *snk_vdo;
75 unsigned int nr_snk_vdo;
76
77 unsigned int operating_snk_mw;
78
79 enum typec_port_type type;
80 enum typec_port_data data;
81 enum typec_role default_role;
82 bool try_role_hw; /* try.{src,snk} implemented in hardware */
83 bool self_powered; /* port belongs to a self powered device */
84
85 const struct typec_altmode_desc *alt_modes;
86 };
87
88 /* Mux state attributes */
89 #define TCPC_MUX_USB_ENABLED BIT(0) /* USB enabled */
90 #define TCPC_MUX_DP_ENABLED BIT(1) /* DP enabled */
91 #define TCPC_MUX_POLARITY_INVERTED BIT(2) /* Polarity inverted */
92
93 /**
94 * struct tcpc_dev - Port configuration and callback functions
95 * @config: Pointer to port configuration
96 * @fwnode: Pointer to port fwnode
97 * @get_vbus: Called to read current VBUS state
98 * @get_current_limit:
99 * Optional; called by the tcpm core when configured as a snk
100 * and cc=Rp-def. This allows the tcpm to provide a fallback
101 * current-limit detection method for the cc=Rp-def case.
102 * For example, some tcpcs may include BC1.2 charger detection
103 * and use that in this case.
104 * @set_cc: Called to set value of CC pins
105 * @get_cc: Called to read current CC pin values
106 * @set_polarity:
107 * Called to set polarity
108 * @set_vconn: Called to enable or disable VCONN
109 * @set_vbus: Called to enable or disable VBUS
110 * @set_current_limit:
111 * Optional; called to set current limit as negotiated
112 * with partner.
113 * @set_pd_rx: Called to enable or disable reception of PD messages
114 * @set_roles: Called to set power and data roles
115 * @start_toggling:
116 * Optional; if supported by hardware, called to start dual-role
117 * toggling or single-role connection detection. Toggling stops
118 * automatically if a connection is established.
119 * @try_role: Optional; called to set a preferred role
120 * @pd_transmit:Called to transmit PD message
121 * @mux: Pointer to multiplexer data
122 */
123 struct tcpc_dev {
124 const struct tcpc_config *config;
125 struct fwnode_handle *fwnode;
126
127 int (*init)(struct tcpc_dev *dev);
128 int (*get_vbus)(struct tcpc_dev *dev);
129 int (*get_current_limit)(struct tcpc_dev *dev);
130 int (*set_cc)(struct tcpc_dev *dev, enum typec_cc_status cc);
131 int (*get_cc)(struct tcpc_dev *dev, enum typec_cc_status *cc1,
132 enum typec_cc_status *cc2);
133 int (*set_polarity)(struct tcpc_dev *dev,
134 enum typec_cc_polarity polarity);
135 int (*set_vconn)(struct tcpc_dev *dev, bool on);
136 int (*set_vbus)(struct tcpc_dev *dev, bool on, bool charge);
137 int (*set_current_limit)(struct tcpc_dev *dev, u32 max_ma, u32 mv);
138 int (*set_pd_rx)(struct tcpc_dev *dev, bool on);
139 int (*set_roles)(struct tcpc_dev *dev, bool attached,
140 enum typec_role role, enum typec_data_role data);
141 int (*start_toggling)(struct tcpc_dev *dev,
142 enum typec_port_type port_type,
143 enum typec_cc_status cc);
144 int (*try_role)(struct tcpc_dev *dev, int role);
145 int (*pd_transmit)(struct tcpc_dev *dev, enum tcpm_transmit_type type,
146 const struct pd_message *msg);
147 };
148
149 struct tcpm_port;
150
151 struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc);
152 void tcpm_unregister_port(struct tcpm_port *port);
153
154 void tcpm_vbus_change(struct tcpm_port *port);
155 void tcpm_cc_change(struct tcpm_port *port);
156 void tcpm_pd_receive(struct tcpm_port *port,
157 const struct pd_message *msg);
158 void tcpm_pd_transmit_complete(struct tcpm_port *port,
159 enum tcpm_transmit_status status);
160 void tcpm_pd_hard_reset(struct tcpm_port *port);
161 void tcpm_tcpc_reset(struct tcpm_port *port);
162
163 #endif /* __LINUX_USB_TCPM_H */