]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/netdev.h
Merge branch 'master' of git://git.denx.de/u-boot-imx
[people/ms/u-boot.git] / include / netdev.h
1 /*
2 * (C) Copyright 2008
3 * Benjamin Warren, biggerbadderben@gmail.com
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24 /*
25 * netdev.h - definitions an prototypes for network devices
26 */
27
28 #ifndef _NETDEV_H_
29 #define _NETDEV_H_
30
31 /*
32 * Board and CPU-specific initialization functions
33 * board_eth_init() has highest priority. cpu_eth_init() only
34 * gets called if board_eth_init() isn't instantiated or fails.
35 * Return values:
36 * 0: success
37 * -1: failure
38 */
39
40 int board_eth_init(bd_t *bis);
41 int cpu_eth_init(bd_t *bis);
42
43 /* Driver initialization prototypes */
44 int altera_tse_initialize(u8 dev_num, int mac_base,
45 int sgdma_rx_base, int sgdma_tx_base);
46 int ax88180_initialize(bd_t *bis);
47 int au1x00_enet_initialize(bd_t*);
48 int at91emac_register(bd_t *bis, unsigned long iobase);
49 int bfin_EMAC_initialize(bd_t *bis);
50 int cs8900_initialize(u8 dev_num, int base_addr);
51 int dc21x4x_initialize(bd_t *bis);
52 int davinci_emac_initialize(void);
53 int designware_initialize(u32 id, ulong base_addr, u32 phy_addr);
54 int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
55 int e1000_initialize(bd_t *bis);
56 int eepro100_initialize(bd_t *bis);
57 int enc28j60_initialize(unsigned int bus, unsigned int cs,
58 unsigned int max_hz, unsigned int mode);
59 int ep93xx_eth_initialize(u8 dev_num, int base_addr);
60 int ethoc_initialize(u8 dev_num, int base_addr);
61 int eth_3com_initialize (bd_t * bis);
62 int fec_initialize (bd_t *bis);
63 int fecmxc_initialize (bd_t *bis);
64 int ftmac100_initialize(bd_t *bits);
65 int greth_initialize(bd_t *bis);
66 void gt6426x_eth_initialize(bd_t *bis);
67 int inca_switch_initialize(bd_t *bis);
68 int lan91c96_initialize(u8 dev_num, int base_addr);
69 int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
70 int mcdmafec_initialize(bd_t *bis);
71 int mcffec_initialize(bd_t *bis);
72 int mpc512x_fec_initialize(bd_t *bis);
73 int mpc5xxx_fec_initialize(bd_t *bis);
74 int mpc8220_fec_initialize(bd_t *bis);
75 int mpc82xx_scc_enet_initialize(bd_t *bis);
76 int mvgbe_initialize(bd_t *bis);
77 int natsemi_initialize(bd_t *bis);
78 int npe_initialize(bd_t *bis);
79 int ns8382x_initialize(bd_t *bis);
80 int pcnet_initialize(bd_t *bis);
81 int plb2800_eth_initialize(bd_t *bis);
82 int ppc_4xx_eth_initialize (bd_t *bis);
83 int rtl8139_initialize(bd_t *bis);
84 int rtl8169_initialize(bd_t *bis);
85 int scc_initialize(bd_t *bis);
86 int skge_initialize(bd_t *bis);
87 int smc911x_initialize(u8 dev_num, int base_addr);
88 int smc91111_initialize(u8 dev_num, int base_addr);
89 int tsi108_eth_initialize(bd_t *bis);
90 int uec_standard_init(bd_t *bis);
91 int uli526x_initialize(bd_t *bis);
92 int xilinx_emaclite_initialize (bd_t *bis, int base_addr);
93 int sh_eth_initialize(bd_t *bis);
94 int dm9000_initialize(bd_t *bis);
95
96 /* Boards with PCI network controllers can call this from their board_eth_init()
97 * function to initialize whatever's on board.
98 * Return value is total # of devices found */
99
100 static inline int pci_eth_init(bd_t *bis)
101 {
102 int num = 0;
103
104 #ifdef CONFIG_PCI
105
106 #ifdef CONFIG_EEPRO100
107 num += eepro100_initialize(bis);
108 #endif
109 #ifdef CONFIG_TULIP
110 num += dc21x4x_initialize(bis);
111 #endif
112 #ifdef CONFIG_E1000
113 num += e1000_initialize(bis);
114 #endif
115 #ifdef CONFIG_PCNET
116 num += pcnet_initialize(bis);
117 #endif
118 #ifdef CONFIG_NATSEMI
119 num += natsemi_initialize(bis);
120 #endif
121 #ifdef CONFIG_NS8382X
122 num += ns8382x_initialize(bis);
123 #endif
124 #if defined(CONFIG_RTL8139)
125 num += rtl8139_initialize(bis);
126 #endif
127 #if defined(CONFIG_RTL8169)
128 num += rtl8169_initialize(bis);
129 #endif
130 #if defined(CONFIG_ULI526X)
131 num += uli526x_initialize(bis);
132 #endif
133
134 #endif /* CONFIG_PCI */
135 return num;
136 }
137
138 /*
139 * Boards with mv88e61xx switch can use this by defining
140 * CONFIG_MV88E61XX_SWITCH in respective board configheader file
141 * the stuct and enums here are used to specify switch configuration params
142 */
143 #if defined(CONFIG_MV88E61XX_SWITCH)
144 enum mv88e61xx_cfg_vlan {
145 MV88E61XX_VLANCFG_DEFAULT,
146 MV88E61XX_VLANCFG_ROUTER
147 };
148
149 enum mv88e61xx_cfg_mdip {
150 MV88E61XX_MDIP_NOCHANGE,
151 MV88E61XX_MDIP_REVERSE
152 };
153
154 enum mv88e61xx_cfg_ledinit {
155 MV88E61XX_LED_INIT_DIS,
156 MV88E61XX_LED_INIT_EN
157 };
158
159 enum mv88e61xx_cfg_rgmiid {
160 MV88E61XX_RGMII_DELAY_DIS,
161 MV88E61XX_RGMII_DELAY_EN
162 };
163
164 enum mv88e61xx_cfg_prtstt {
165 MV88E61XX_PORTSTT_DISABLED,
166 MV88E61XX_PORTSTT_BLOCKING,
167 MV88E61XX_PORTSTT_LEARNING,
168 MV88E61XX_PORTSTT_FORWARDING
169 };
170
171 struct mv88e61xx_config {
172 char *name;
173 enum mv88e61xx_cfg_vlan vlancfg;
174 enum mv88e61xx_cfg_rgmiid rgmii_delay;
175 enum mv88e61xx_cfg_prtstt portstate;
176 enum mv88e61xx_cfg_ledinit led_init;
177 enum mv88e61xx_cfg_mdip mdip;
178 u32 ports_enabled;
179 u8 cpuport;
180 };
181
182 int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig);
183 #endif /* CONFIG_MV88E61XX_SWITCH */
184
185 #endif /* _NETDEV_H_ */