]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/post.h
Merge git://git.denx.de/u-boot into x1
[people/ms/u-boot.git] / include / post.h
1 /*
2 * (C) Copyright 2002
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23 #ifndef _POST_H
24 #define _POST_H
25
26 #ifndef __ASSEMBLY__
27 #include <common.h>
28 #endif
29
30 #ifdef CONFIG_POST
31
32 #define POST_POWERON 0x01 /* test runs on power-on booting */
33 #define POST_NORMAL 0x02 /* test runs on normal booting */
34 #define POST_SLOWTEST 0x04 /* test is slow, enabled by key press */
35 #define POST_POWERTEST 0x08 /* test runs after watchdog reset */
36
37 #define POST_COLDBOOT 0x80 /* first boot after power-on */
38
39 #define POST_ROM 0x0100 /* test runs in ROM */
40 #define POST_RAM 0x0200 /* test runs in RAM */
41 #define POST_MANUAL 0x0400 /* test runs on diag command */
42 #define POST_REBOOT 0x0800 /* test may cause rebooting */
43 #define POST_PREREL 0x1000 /* test runs before relocation */
44
45 #define POST_CRITICAL 0x2000 /* Use failbootcmd if test failed */
46 #define POST_STOP 0x4000 /* Interrupt POST sequence on fail */
47
48 #define POST_MEM (POST_RAM | POST_ROM)
49 #define POST_ALWAYS (POST_NORMAL | \
50 POST_SLOWTEST | \
51 POST_MANUAL | \
52 POST_POWERON )
53
54 #define POST_FAIL_SAVE 0x80
55
56 #ifndef __ASSEMBLY__
57
58 struct post_test {
59 char *name;
60 char *cmd;
61 char *desc;
62 int flags;
63 int (*test) (int flags);
64 int (*init_f) (void);
65 void (*reloc) (void);
66 unsigned long testid;
67 };
68 int post_init_f (void);
69 void post_bootmode_init (void);
70 int post_bootmode_get (unsigned int * last_test);
71 void post_bootmode_clear (void);
72 void post_output_backlog ( void );
73 int post_run (char *name, int flags);
74 int post_info (char *name);
75 int post_log (char *format, ...);
76 void post_reloc (void);
77 unsigned long post_time_ms (unsigned long base);
78
79 extern struct post_test post_list[];
80 extern unsigned int post_list_size;
81 extern int post_hotkeys_pressed(void);
82
83 #endif /* __ASSEMBLY__ */
84
85 #define CONFIG_SYS_POST_RTC 0x00000001
86 #define CONFIG_SYS_POST_WATCHDOG 0x00000002
87 #define CONFIG_SYS_POST_MEMORY 0x00000004
88 #define CONFIG_SYS_POST_CPU 0x00000008
89 #define CONFIG_SYS_POST_I2C 0x00000010
90 #define CONFIG_SYS_POST_CACHE 0x00000020
91 #define CONFIG_SYS_POST_UART 0x00000040
92 #define CONFIG_SYS_POST_ETHER 0x00000080
93 #define CONFIG_SYS_POST_SPI 0x00000100
94 #define CONFIG_SYS_POST_USB 0x00000200
95 #define CONFIG_SYS_POST_SPR 0x00000400
96 #define CONFIG_SYS_POST_SYSMON 0x00000800
97 #define CONFIG_SYS_POST_DSP 0x00001000
98 #define CONFIG_SYS_POST_OCM 0x00002000
99 #define CONFIG_SYS_POST_FPU 0x00004000
100 #define CONFIG_SYS_POST_ECC 0x00008000
101 #define CONFIG_SYS_POST_BSPEC1 0x00010000
102 #define CONFIG_SYS_POST_BSPEC2 0x00020000
103 #define CONFIG_SYS_POST_BSPEC3 0x00040000
104 #define CONFIG_SYS_POST_BSPEC4 0x00080000
105 #define CONFIG_SYS_POST_BSPEC5 0x00100000
106 #define CONFIG_SYS_POST_CODEC 0x00200000
107
108 #endif /* CONFIG_POST */
109
110 #endif /* _POST_H */