1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef _SCSI_SCSI_DEVICE_H
3 #define _SCSI_SCSI_DEVICE_H
5 #include <linux/list.h>
6 #include <linux/spinlock.h>
7 #include <linux/workqueue.h>
8 #include <linux/blk-mq.h>
10 #include <linux/atomic.h>
11 #include <linux/sbitmap.h>
18 struct scsi_sense_hdr
;
20 typedef __u64 __bitwise blist_flags_t
;
22 #define SCSI_SENSE_BUFFERSIZE 96
24 struct scsi_mode_data
{
26 __u16 block_descriptor_length
;
34 * sdev state: If you alter this, you also need to alter scsi_sysfs.c
35 * (for the ascii descriptions) and the state model enforcer:
36 * scsi_lib:scsi_device_set_state().
38 enum scsi_device_state
{
39 SDEV_CREATED
= 1, /* device created but not added to sysfs
40 * Only internal commands allowed (for inq) */
41 SDEV_RUNNING
, /* device properly configured
42 * All commands allowed */
43 SDEV_CANCEL
, /* beginning to delete device
44 * Only error handler commands allowed */
45 SDEV_DEL
, /* device deleted
46 * no commands allowed */
47 SDEV_QUIESCE
, /* Device quiescent. No block commands
48 * will be accepted, only specials (which
49 * originate in the mid-layer) */
50 SDEV_OFFLINE
, /* Device offlined (by error handling or
52 SDEV_TRANSPORT_OFFLINE
, /* Offlined by transport class error handler */
53 SDEV_BLOCK
, /* Device blocked by scsi lld. No
54 * scsi commands from user or midlayer
55 * should be issued to the scsi
57 SDEV_CREATED_BLOCK
, /* same as above but for created devices */
61 SCSI_SCAN_INITIAL
= 0,
66 enum scsi_device_event
{
67 SDEV_EVT_MEDIA_CHANGE
= 1, /* media has changed */
68 SDEV_EVT_INQUIRY_CHANGE_REPORTED
, /* 3F 03 UA reported */
69 SDEV_EVT_CAPACITY_CHANGE_REPORTED
, /* 2A 09 UA reported */
70 SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED
, /* 38 07 UA reported */
71 SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED
, /* 2A 01 UA reported */
72 SDEV_EVT_LUN_CHANGE_REPORTED
, /* 3F 0E UA reported */
73 SDEV_EVT_ALUA_STATE_CHANGE_REPORTED
, /* 2A 06 UA reported */
74 SDEV_EVT_POWER_ON_RESET_OCCURRED
, /* 29 00 UA reported */
76 SDEV_EVT_FIRST
= SDEV_EVT_MEDIA_CHANGE
,
77 SDEV_EVT_LAST
= SDEV_EVT_POWER_ON_RESET_OCCURRED
,
79 SDEV_EVT_MAXBITS
= SDEV_EVT_LAST
+ 1
83 enum scsi_device_event evt_type
;
84 struct list_head node
;
86 /* put union of data structures, for non-simple event types,
92 * struct scsi_vpd - SCSI Vital Product Data
93 * @rcu: For kfree_rcu().
94 * @len: Length in bytes of @data.
95 * @data: VPD data as defined in various T10 SCSI standard documents.
100 unsigned char data
[];
104 struct Scsi_Host
*host
;
105 struct request_queue
*request_queue
;
107 /* the next two are protected by the host->host_lock */
108 struct list_head siblings
; /* list of all devices on this host */
109 struct list_head same_target_siblings
; /* just the devices sharing same target id */
111 struct sbitmap budget_map
;
112 atomic_t device_blocked
; /* Device returned QUEUE_FULL. */
115 spinlock_t list_lock
;
116 struct list_head starved_entry
;
117 unsigned short queue_depth
; /* How deep of a queue we want */
118 unsigned short max_queue_depth
; /* max queue depth */
119 unsigned short last_queue_full_depth
; /* These two are used by */
120 unsigned short last_queue_full_count
; /* scsi_track_queue_full() */
121 unsigned long last_queue_full_time
; /* last queue full time */
122 unsigned long queue_ramp_up_period
; /* ramp up period in jiffies */
123 #define SCSI_DEFAULT_RAMP_UP_PERIOD (120 * HZ)
125 unsigned long last_queue_ramp_up
; /* last queue ramp up time */
127 unsigned int id
, channel
;
129 unsigned int manufacturer
; /* Manufacturer of device, for using
130 * vendor-specific cmd's */
131 unsigned sector_size
; /* size in bytes */
133 void *hostdata
; /* available to low-level driver */
136 char inq_periph_qual
; /* PQ from INQUIRY data */
137 struct mutex inquiry_mutex
;
138 unsigned char inquiry_len
; /* valid bytes in 'inquiry' */
139 unsigned char * inquiry
; /* INQUIRY response data */
140 const char * vendor
; /* [back_compat] point into 'inquiry' ... */
141 const char * model
; /* ... after scan; point to static string */
142 const char * rev
; /* ... "nullnullnullnull" before scan */
144 #define SCSI_DEFAULT_VPD_LEN 255 /* default SCSI VPD page size (max) */
145 struct scsi_vpd __rcu
*vpd_pg0
;
146 struct scsi_vpd __rcu
*vpd_pg83
;
147 struct scsi_vpd __rcu
*vpd_pg80
;
148 struct scsi_vpd __rcu
*vpd_pg89
;
149 struct scsi_vpd __rcu
*vpd_pgb0
;
150 struct scsi_vpd __rcu
*vpd_pgb1
;
151 struct scsi_vpd __rcu
*vpd_pgb2
;
153 struct scsi_target
*sdev_target
;
155 blist_flags_t sdev_bflags
; /* black/white flags as also found in
156 * scsi_devinfo.[hc]. For now used only to
157 * pass settings from slave_alloc to scsi
159 unsigned int eh_timeout
; /* Error handling timeout */
162 * If true, let the high-level device driver (sd) manage the device
163 * power state for system suspend/resume (suspend to RAM and
164 * hibernation) operations.
166 unsigned manage_system_start_stop
:1;
169 * If true, let the high-level device driver (sd) manage the device
170 * power state for runtime device suspand and resume operations.
172 unsigned manage_runtime_start_stop
:1;
175 * If true, let the high-level device driver (sd) manage the device
176 * power state for system shutdown (power off) operations.
178 unsigned manage_shutdown
:1;
181 * If set and if the device is runtime suspended, ask the high-level
182 * device driver (sd) to force a runtime resume of the device.
184 unsigned force_runtime_start_on_system_start
:1;
186 unsigned removable
:1;
187 unsigned changed
:1; /* Data invalid due to media change */
188 unsigned busy
:1; /* Used to prevent races */
189 unsigned lockable
:1; /* Able to prevent media removal */
190 unsigned locked
:1; /* Media removal disabled */
191 unsigned borken
:1; /* Tell the Seagate driver to be
192 * painfully slow on this device */
193 unsigned disconnect
:1; /* can disconnect */
194 unsigned soft_reset
:1; /* Uses soft reset option */
195 unsigned sdtr
:1; /* Device supports SDTR messages */
196 unsigned wdtr
:1; /* Device supports WDTR messages */
197 unsigned ppr
:1; /* Device supports PPR messages */
198 unsigned tagged_supported
:1; /* Supports SCSI-II tagged queuing */
199 unsigned simple_tags
:1; /* simple queue tag messages are enabled */
200 unsigned was_reset
:1; /* There was a bus reset on the bus for
202 unsigned expecting_cc_ua
:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
203 * because we did a bus reset. */
204 unsigned use_10_for_rw
:1; /* first try 10-byte read / write */
205 unsigned use_10_for_ms
:1; /* first try 10-byte mode sense/select */
206 unsigned set_dbd_for_ms
:1; /* Set "DBD" field in mode sense */
207 unsigned read_before_ms
:1; /* perform a READ before MODE SENSE */
208 unsigned no_report_opcodes
:1; /* no REPORT SUPPORTED OPERATION CODES */
209 unsigned no_write_same
:1; /* no WRITE SAME command */
210 unsigned use_16_for_rw
:1; /* Use read/write(16) over read/write(10) */
211 unsigned use_16_for_sync
:1; /* Use sync (16) over sync (10) */
212 unsigned skip_ms_page_8
:1; /* do not use MODE SENSE page 0x08 */
213 unsigned skip_ms_page_3f
:1; /* do not use MODE SENSE page 0x3f */
214 unsigned skip_vpd_pages
:1; /* do not read VPD pages */
215 unsigned try_vpd_pages
:1; /* attempt to read VPD pages */
216 unsigned use_192_bytes_for_3f
:1; /* ask for 192 bytes from page 0x3f */
217 unsigned no_start_on_add
:1; /* do not issue start on add */
218 unsigned allow_restart
:1; /* issue START_UNIT in error handler */
219 unsigned start_stop_pwr_cond
:1; /* Set power cond. in START_STOP_UNIT */
220 unsigned no_uld_attach
:1; /* disable connecting to upper level drivers */
221 unsigned select_no_atn
:1;
222 unsigned fix_capacity
:1; /* READ_CAPACITY is too high by 1 */
223 unsigned guess_capacity
:1; /* READ_CAPACITY might be too high by 1 */
224 unsigned retry_hwerror
:1; /* Retry HARDWARE_ERROR */
225 unsigned last_sector_bug
:1; /* do not use multisector accesses on
226 SD_LAST_BUGGY_SECTORS */
227 unsigned no_read_disc_info
:1; /* Avoid READ_DISC_INFO cmds */
228 unsigned no_read_capacity_16
:1; /* Avoid READ_CAPACITY_16 cmds */
229 unsigned try_rc_10_first
:1; /* Try READ_CAPACACITY_10 first */
230 unsigned security_supported
:1; /* Supports Security Protocols */
231 unsigned is_visible
:1; /* is the device visible in sysfs */
232 unsigned wce_default_on
:1; /* Cache is ON by default */
233 unsigned no_dif
:1; /* T10 PI (DIF) should be disabled */
234 unsigned broken_fua
:1; /* Don't set FUA bit */
235 unsigned lun_in_cdb
:1; /* Store LUN bits in CDB[1] */
236 unsigned unmap_limit_for_ws
:1; /* Use the UNMAP limit for WRITE SAME */
237 unsigned rpm_autosuspend
:1; /* Enable runtime autosuspend at device
239 unsigned ignore_media_change
:1; /* Ignore MEDIA CHANGE on resume */
240 unsigned silence_suspend
:1; /* Do not print runtime PM related messages */
241 unsigned no_vpd_size
:1; /* No VPD size reported in header */
243 unsigned cdl_supported
:1; /* Command duration limits supported */
244 unsigned cdl_enable
:1; /* Enable/disable Command duration limits */
246 unsigned int queue_stopped
; /* request queue is quiesced */
247 bool offline_already
; /* Device offline message logged */
249 atomic_t disk_events_disable_depth
; /* disable depth for disk events */
251 DECLARE_BITMAP(supported_events
, SDEV_EVT_MAXBITS
); /* supported events */
252 DECLARE_BITMAP(pending_events
, SDEV_EVT_MAXBITS
); /* pending events */
253 struct list_head event_list
; /* asserted events */
254 struct work_struct event_work
;
256 unsigned int max_device_blocked
; /* what device_blocked counts down from */
257 #define SCSI_DEFAULT_DEVICE_BLOCKED 3
259 atomic_t iorequest_cnt
;
264 struct device sdev_gendev
,
267 struct work_struct requeue_work
;
269 struct scsi_device_handler
*handler
;
272 size_t dma_drain_len
;
275 unsigned int sg_timeout
;
276 unsigned int sg_reserved_size
;
278 struct bsg_device
*bsg_dev
;
279 unsigned char access_state
;
280 struct mutex state_mutex
;
281 enum scsi_device_state sdev_state
;
282 struct task_struct
*quiesced_by
;
283 unsigned long sdev_data
[];
284 } __attribute__((aligned(sizeof(unsigned long))));
286 #define to_scsi_device(d) \
287 container_of(d, struct scsi_device, sdev_gendev)
288 #define class_to_sdev(d) \
289 container_of(d, struct scsi_device, sdev_dev)
290 #define transport_class_to_sdev(class_dev) \
291 to_scsi_device(class_dev->parent)
293 #define sdev_dbg(sdev, fmt, a...) \
294 dev_dbg(&(sdev)->sdev_gendev, fmt, ##a)
297 * like scmd_printk, but the device name is passed in
298 * as a string pointer
301 sdev_prefix_printk(const char *, const struct scsi_device
*, const char *,
304 #define sdev_printk(l, sdev, fmt, a...) \
305 sdev_prefix_printk(l, sdev, NULL, fmt, ##a)
308 scmd_printk(const char *, const struct scsi_cmnd
*, const char *, ...);
310 #define scmd_dbg(scmd, fmt, a...) \
312 struct request *__rq = scsi_cmd_to_rq((scmd)); \
315 sdev_dbg((scmd)->device, "[%s] " fmt, \
316 __rq->q->disk->disk_name, ##a); \
318 sdev_dbg((scmd)->device, fmt, ##a); \
321 enum scsi_target_state
{
325 STARGET_CREATED_REMOVE
,
330 * scsi_target: representation of a scsi target, for now, this is only
331 * used for single_lun devices. If no one has active IO to the target,
332 * starget_sdev_user is NULL, else it points to the active sdev.
335 struct scsi_device
*starget_sdev_user
;
336 struct list_head siblings
;
337 struct list_head devices
;
339 struct kref reap_ref
; /* last put renders target invisible */
340 unsigned int channel
;
341 unsigned int id
; /* target id ... replace
342 * scsi_device.id eventually */
343 unsigned int create
:1; /* signal that it needs to be added */
344 unsigned int single_lun
:1; /* Indicates we should only
345 * allow I/O to one of the luns
346 * for the device at a time. */
347 unsigned int pdt_1f_for_no_lun
:1; /* PDT = 0x1f
348 * means no lun present. */
349 unsigned int no_report_luns
:1; /* Don't use
350 * REPORT LUNS for scanning. */
351 unsigned int expecting_lun_change
:1; /* A device has reported
352 * a 3F/0E UA, other devices on
353 * the same target will also. */
354 /* commands actually active on LLD. */
355 atomic_t target_busy
;
356 atomic_t target_blocked
;
359 * LLDs should set this in the slave_alloc host template callout.
360 * If set to zero then there is not limit.
362 unsigned int can_queue
;
363 unsigned int max_target_blocked
;
364 #define SCSI_DEFAULT_TARGET_BLOCKED 3
367 enum scsi_target_state state
;
368 void *hostdata
; /* available to low-level driver */
369 unsigned long starget_data
[]; /* for the transport */
370 /* starget_data must be the last element!!!! */
371 } __attribute__((aligned(sizeof(unsigned long))));
373 #define to_scsi_target(d) container_of(d, struct scsi_target, dev)
374 static inline struct scsi_target
*scsi_target(struct scsi_device
*sdev
)
376 return to_scsi_target(sdev
->sdev_gendev
.parent
);
378 #define transport_class_to_starget(class_dev) \
379 to_scsi_target(class_dev->parent)
381 #define starget_printk(prefix, starget, fmt, a...) \
382 dev_printk(prefix, &(starget)->dev, fmt, ##a)
384 extern struct scsi_device
*__scsi_add_device(struct Scsi_Host
*,
385 uint
, uint
, u64
, void *hostdata
);
386 extern int scsi_add_device(struct Scsi_Host
*host
, uint channel
,
387 uint target
, u64 lun
);
388 extern int scsi_register_device_handler(struct scsi_device_handler
*scsi_dh
);
389 extern void scsi_remove_device(struct scsi_device
*);
390 extern int scsi_unregister_device_handler(struct scsi_device_handler
*scsi_dh
);
391 void scsi_attach_vpd(struct scsi_device
*sdev
);
392 void scsi_cdl_check(struct scsi_device
*sdev
);
393 int scsi_cdl_enable(struct scsi_device
*sdev
, bool enable
);
395 extern struct scsi_device
*scsi_device_from_queue(struct request_queue
*q
);
396 extern int __must_check
scsi_device_get(struct scsi_device
*);
397 extern void scsi_device_put(struct scsi_device
*);
398 extern struct scsi_device
*scsi_device_lookup(struct Scsi_Host
*,
400 extern struct scsi_device
*__scsi_device_lookup(struct Scsi_Host
*,
402 extern struct scsi_device
*scsi_device_lookup_by_target(struct scsi_target
*,
404 extern struct scsi_device
*__scsi_device_lookup_by_target(struct scsi_target
*,
406 extern void starget_for_each_device(struct scsi_target
*, void *,
407 void (*fn
)(struct scsi_device
*, void *));
408 extern void __starget_for_each_device(struct scsi_target
*, void *,
409 void (*fn
)(struct scsi_device
*,
412 /* only exposed to implement shost_for_each_device */
413 extern struct scsi_device
*__scsi_iterate_devices(struct Scsi_Host
*,
414 struct scsi_device
*);
417 * shost_for_each_device - iterate over all devices of a host
418 * @sdev: the &struct scsi_device to use as a cursor
419 * @shost: the &struct scsi_host to iterate over
421 * Iterator that returns each device attached to @shost. This loop
422 * takes a reference on each device and releases it at the end. If
423 * you break out of the loop, you must call scsi_device_put(sdev).
425 #define shost_for_each_device(sdev, shost) \
426 for ((sdev) = __scsi_iterate_devices((shost), NULL); \
428 (sdev) = __scsi_iterate_devices((shost), (sdev)))
431 * __shost_for_each_device - iterate over all devices of a host (UNLOCKED)
432 * @sdev: the &struct scsi_device to use as a cursor
433 * @shost: the &struct scsi_host to iterate over
435 * Iterator that returns each device attached to @shost. It does _not_
436 * take a reference on the scsi_device, so the whole loop must be
437 * protected by shost->host_lock.
439 * Note: The only reason to use this is because you need to access the
440 * device list in interrupt context. Otherwise you really want to use
441 * shost_for_each_device instead.
443 #define __shost_for_each_device(sdev, shost) \
444 list_for_each_entry((sdev), &((shost)->__devices), siblings)
446 extern int scsi_change_queue_depth(struct scsi_device
*, int);
447 extern int scsi_track_queue_full(struct scsi_device
*, int);
449 extern int scsi_set_medium_removal(struct scsi_device
*, char);
451 int scsi_mode_sense(struct scsi_device
*sdev
, int dbd
, int modepage
,
452 int subpage
, unsigned char *buffer
, int len
, int timeout
,
453 int retries
, struct scsi_mode_data
*data
,
454 struct scsi_sense_hdr
*);
455 extern int scsi_mode_select(struct scsi_device
*sdev
, int pf
, int sp
,
456 unsigned char *buffer
, int len
, int timeout
,
457 int retries
, struct scsi_mode_data
*data
,
458 struct scsi_sense_hdr
*);
459 extern int scsi_test_unit_ready(struct scsi_device
*sdev
, int timeout
,
460 int retries
, struct scsi_sense_hdr
*sshdr
);
461 extern int scsi_get_vpd_page(struct scsi_device
*, u8 page
, unsigned char *buf
,
463 int scsi_report_opcode(struct scsi_device
*sdev
, unsigned char *buffer
,
464 unsigned int len
, unsigned char opcode
,
466 extern int scsi_device_set_state(struct scsi_device
*sdev
,
467 enum scsi_device_state state
);
468 extern struct scsi_event
*sdev_evt_alloc(enum scsi_device_event evt_type
,
470 extern void sdev_evt_send(struct scsi_device
*sdev
, struct scsi_event
*evt
);
471 extern void sdev_evt_send_simple(struct scsi_device
*sdev
,
472 enum scsi_device_event evt_type
, gfp_t gfpflags
);
473 extern int scsi_device_quiesce(struct scsi_device
*sdev
);
474 extern void scsi_device_resume(struct scsi_device
*sdev
);
475 extern void scsi_target_quiesce(struct scsi_target
*);
476 extern void scsi_target_resume(struct scsi_target
*);
477 extern void scsi_scan_target(struct device
*parent
, unsigned int channel
,
478 unsigned int id
, u64 lun
,
479 enum scsi_scan_mode rescan
);
480 extern void scsi_target_reap(struct scsi_target
*);
481 void scsi_block_targets(struct Scsi_Host
*shost
, struct device
*dev
);
482 extern void scsi_target_unblock(struct device
*, enum scsi_device_state
);
483 extern void scsi_remove_target(struct device
*);
484 extern const char *scsi_device_state_name(enum scsi_device_state
);
485 extern int scsi_is_sdev_device(const struct device
*);
486 extern int scsi_is_target_device(const struct device
*);
487 extern void scsi_sanitize_inquiry_string(unsigned char *s
, int len
);
489 /* Optional arguments to scsi_execute_cmd */
490 struct scsi_exec_args
{
491 unsigned char *sense
; /* sense buffer */
492 unsigned int sense_len
; /* sense buffer len */
493 struct scsi_sense_hdr
*sshdr
; /* decoded sense header */
494 blk_mq_req_flags_t req_flags
; /* BLK_MQ_REQ flags */
495 int scmd_flags
; /* SCMD flags */
496 int *resid
; /* residual length */
499 int scsi_execute_cmd(struct scsi_device
*sdev
, const unsigned char *cmd
,
500 blk_opf_t opf
, void *buffer
, unsigned int bufflen
,
501 int timeout
, int retries
,
502 const struct scsi_exec_args
*args
);
504 extern void sdev_disable_disk_events(struct scsi_device
*sdev
);
505 extern void sdev_enable_disk_events(struct scsi_device
*sdev
);
506 extern int scsi_vpd_lun_id(struct scsi_device
*, char *, size_t);
507 extern int scsi_vpd_tpg_id(struct scsi_device
*, int *);
510 extern int scsi_autopm_get_device(struct scsi_device
*);
511 extern void scsi_autopm_put_device(struct scsi_device
*);
513 static inline int scsi_autopm_get_device(struct scsi_device
*d
) { return 0; }
514 static inline void scsi_autopm_put_device(struct scsi_device
*d
) {}
515 #endif /* CONFIG_PM */
517 static inline int __must_check
scsi_device_reprobe(struct scsi_device
*sdev
)
519 return device_reprobe(&sdev
->sdev_gendev
);
522 static inline unsigned int sdev_channel(struct scsi_device
*sdev
)
524 return sdev
->channel
;
527 static inline unsigned int sdev_id(struct scsi_device
*sdev
)
532 #define scmd_id(scmd) sdev_id((scmd)->device)
533 #define scmd_channel(scmd) sdev_channel((scmd)->device)
536 * checks for positions of the SCSI state machine
538 static inline int scsi_device_online(struct scsi_device
*sdev
)
540 return (sdev
->sdev_state
!= SDEV_OFFLINE
&&
541 sdev
->sdev_state
!= SDEV_TRANSPORT_OFFLINE
&&
542 sdev
->sdev_state
!= SDEV_DEL
);
544 static inline int scsi_device_blocked(struct scsi_device
*sdev
)
546 return sdev
->sdev_state
== SDEV_BLOCK
||
547 sdev
->sdev_state
== SDEV_CREATED_BLOCK
;
549 static inline int scsi_device_created(struct scsi_device
*sdev
)
551 return sdev
->sdev_state
== SDEV_CREATED
||
552 sdev
->sdev_state
== SDEV_CREATED_BLOCK
;
555 int scsi_internal_device_block_nowait(struct scsi_device
*sdev
);
556 int scsi_internal_device_unblock_nowait(struct scsi_device
*sdev
,
557 enum scsi_device_state new_state
);
559 /* accessor functions for the SCSI parameters */
560 static inline int scsi_device_sync(struct scsi_device
*sdev
)
564 static inline int scsi_device_wide(struct scsi_device
*sdev
)
568 static inline int scsi_device_dt(struct scsi_device
*sdev
)
572 static inline int scsi_device_dt_only(struct scsi_device
*sdev
)
574 if (sdev
->inquiry_len
< 57)
576 return (sdev
->inquiry
[56] & 0x0c) == 0x04;
578 static inline int scsi_device_ius(struct scsi_device
*sdev
)
580 if (sdev
->inquiry_len
< 57)
582 return sdev
->inquiry
[56] & 0x01;
584 static inline int scsi_device_qas(struct scsi_device
*sdev
)
586 if (sdev
->inquiry_len
< 57)
588 return sdev
->inquiry
[56] & 0x02;
590 static inline int scsi_device_enclosure(struct scsi_device
*sdev
)
592 return sdev
->inquiry
? (sdev
->inquiry
[6] & (1<<6)) : 1;
595 static inline int scsi_device_protection(struct scsi_device
*sdev
)
600 return sdev
->scsi_level
> SCSI_2
&& sdev
->inquiry
[5] & (1<<0);
603 static inline int scsi_device_tpgs(struct scsi_device
*sdev
)
605 return sdev
->inquiry
? (sdev
->inquiry
[5] >> 4) & 0x3 : 0;
609 * scsi_device_supports_vpd - test if a device supports VPD pages
610 * @sdev: the &struct scsi_device to test
612 * If the 'try_vpd_pages' flag is set it takes precedence.
613 * Otherwise we will assume VPD pages are supported if the
614 * SCSI level is at least SPC-3 and 'skip_vpd_pages' is not set.
616 static inline int scsi_device_supports_vpd(struct scsi_device
*sdev
)
618 /* Attempt VPD inquiry if the device blacklist explicitly calls
621 if (sdev
->try_vpd_pages
)
624 * Although VPD inquiries can go to SCSI-2 type devices,
625 * some USB ones crash on receiving them, and the pages
626 * we currently ask for are mandatory for SPC-2 and beyond
628 if (sdev
->scsi_level
>= SCSI_SPC_2
&& !sdev
->skip_vpd_pages
)
633 static inline int scsi_device_busy(struct scsi_device
*sdev
)
635 return sbitmap_weight(&sdev
->budget_map
);
638 #define MODULE_ALIAS_SCSI_DEVICE(type) \
639 MODULE_ALIAS("scsi:t-" __stringify(type) "*")
640 #define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
642 #endif /* _SCSI_SCSI_DEVICE_H */