include/scsi.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2001
   4  * Denis Peter, MPL AG Switzerland
   5  */
   6  #ifndef _SCSI_H
   7  #define _SCSI_H
   8
   9 #include <asm/cache.h>
  10 #include <linux/dma-direction.h>
  11
  12 /* Fix this to the maximum */
  13 #define SCSI_MAX_DEVICE \
  14         (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN)
  15
  16 struct udevice;
  17
  18 struct scsi_cmd {
  19         unsigned char           cmd[16];                                        /* command                                 */
  20         /* for request sense */
  21         unsigned char           sense_buf[64]
  22                 __attribute__((aligned(ARCH_DMA_MINALIGN)));
  23         unsigned char           status;                                         /* SCSI Status                   */
  24         unsigned char           target;                                         /* Target ID                             */
  25         unsigned char           lun;                                                    /* Target LUN        */
  26         unsigned char           cmdlen;                                         /* command len                          */
  27         unsigned long           datalen;                                        /* Total data length    */
  28         unsigned char   *       pdata;                                          /* pointer to data              */
  29         unsigned char           msgout[12];                             /* Messge out buffer (NOT USED) */
  30         unsigned char           msgin[12];                              /* Message in buffer    */
  31         unsigned char           sensecmdlen;                    /* Sense command len    */
  32         unsigned long           sensedatalen;                   /* Sense data len                       */
  33         unsigned char           sensecmd[6];                    /* Sense command                        */
  34         unsigned long           contr_stat;                             /* Controller Status    */
  35         unsigned long           trans_bytes;                    /* tranfered bytes              */
  36
  37         unsigned int            priv;
  38         enum dma_data_direction dma_dir;
  39 };
  40
  41 /*-----------------------------------------------------------
  42 **
  43 **      SCSI  constants.
  44 **
  45 **-----------------------------------------------------------
  46 */
  47
  48 /*
  49 **      Messages
  50 */
  51
  52 #define M_COMPLETE      (0x00)
  53 #define M_EXTENDED      (0x01)
  54 #define M_SAVE_DP       (0x02)
  55 #define M_RESTORE_DP    (0x03)
  56 #define M_DISCONNECT    (0x04)
  57 #define M_ID_ERROR      (0x05)
  58 #define M_ABORT         (0x06)
  59 #define M_REJECT        (0x07)
  60 #define M_NOOP          (0x08)
  61 #define M_PARITY        (0x09)
  62 #define M_LCOMPLETE     (0x0a)
  63 #define M_FCOMPLETE     (0x0b)
  64 #define M_RESET         (0x0c)
  65 #define M_ABORT_TAG     (0x0d)
  66 #define M_CLEAR_QUEUE   (0x0e)
  67 #define M_INIT_REC      (0x0f)
  68 #define M_REL_REC       (0x10)
  69 #define M_TERMINATE     (0x11)
  70 #define M_SIMPLE_TAG    (0x20)
  71 #define M_HEAD_TAG      (0x21)
  72 #define M_ORDERED_TAG   (0x22)
  73 #define M_IGN_RESIDUE   (0x23)
  74 #define M_IDENTIFY      (0x80)
  75
  76 #define M_X_MODIFY_DP   (0x00)
  77 #define M_X_SYNC_REQ    (0x01)
  78 #define M_X_WIDE_REQ    (0x03)
  79 #define M_X_PPR_REQ     (0x04)
  80
  81
  82 /*
  83 **      Status
  84 */
  85
  86 #define S_GOOD          (0x00)
  87 #define S_CHECK_COND    (0x02)
  88 #define S_COND_MET      (0x04)
  89 #define S_BUSY          (0x08)
  90 #define S_INT           (0x10)
  91 #define S_INT_COND_MET  (0x14)
  92 #define S_CONFLICT      (0x18)
  93 #define S_TERMINATED    (0x20)
  94 #define S_QUEUE_FULL    (0x28)
  95 #define S_ILLEGAL       (0xff)
  96 #define S_SENSE         (0x80)
  97
  98 /*
  99  * Sense_keys
 100  */
 101
 102 #define SENSE_NO_SENSE                          0x0
 103 #define SENSE_RECOVERED_ERROR   0x1
 104 #define SENSE_NOT_READY                         0x2
 105 #define SENSE_MEDIUM_ERROR              0x3
 106 #define SENSE_HARDWARE_ERROR    0x4
 107 #define SENSE_ILLEGAL_REQUEST   0x5
 108 #define SENSE_UNIT_ATTENTION    0x6
 109 #define SENSE_DATA_PROTECT              0x7
 110 #define SENSE_BLANK_CHECK                       0x8
 111 #define SENSE_VENDOR_SPECIFIC   0x9
 112 #define SENSE_COPY_ABORTED              0xA
 113 #define SENSE_ABORTED_COMMAND   0xB
 114 #define SENSE_VOLUME_OVERFLOW   0xD
 115 #define SENSE_MISCOMPARE                        0xE
 116
 117
 118 #define SCSI_CHANGE_DEF 0x40            /* Change Definition (Optional) */
 119 #define SCSI_COMPARE            0x39            /* Compare (O) */
 120 #define SCSI_COPY                       0x18            /* Copy (O) */
 121 #define SCSI_COP_VERIFY 0x3A            /* Copy and Verify (O) */
 122 #define SCSI_INQUIRY            0x12            /* Inquiry (MANDATORY) */
 123 #define SCSI_LOG_SELECT 0x4C            /* Log Select (O) */
 124 #define SCSI_LOG_SENSE  0x4D            /* Log Sense (O) */
 125 #define SCSI_MODE_SEL6  0x15            /* Mode Select 6-byte (Device Specific) */
 126 #define SCSI_MODE_SEL10 0x55            /* Mode Select 10-byte (Device Specific) */
 127 #define SCSI_MODE_SEN6  0x1A            /* Mode Sense 6-byte (Device Specific) */
 128 #define SCSI_MODE_SEN10 0x5A            /* Mode Sense 10-byte (Device Specific) */
 129 #define SCSI_READ_BUFF  0x3C            /* Read Buffer (O) */
 130 #define SCSI_REQ_SENSE  0x03            /* Request Sense (MANDATORY) */
 131 #define SCSI_SEND_DIAG  0x1D            /* Send Diagnostic (O) */
 132 #define SCSI_TST_U_RDY  0x00            /* Test Unit Ready (MANDATORY) */
 133 #define SCSI_WRITE_BUFF 0x3B            /* Write Buffer (O) */
 134 /***************************************************************************
 135  *                        %%% Commands Unique to Direct Access Devices %%%
 136  ***************************************************************************/
 137 #define SCSI_COMPARE            0x39            /* Compare (O) */
 138 #define SCSI_FORMAT             0x04            /* Format Unit (MANDATORY) */
 139 #define SCSI_LCK_UN_CAC 0x36            /* Lock Unlock Cache (O) */
 140 #define SCSI_PREFETCH   0x34            /* Prefetch (O) */
 141 #define SCSI_MED_REMOVL 0x1E            /* Prevent/Allow medium Removal (O) */
 142 #define SCSI_READ6              0x08            /* Read 6-byte (MANDATORY) */
 143 #define SCSI_READ10             0x28            /* Read 10-byte (MANDATORY) */
 144 #define SCSI_READ16     0x48
 145 #define SCSI_RD_CAPAC   0x25            /* Read Capacity (MANDATORY) */
 146 #define SCSI_RD_CAPAC10 SCSI_RD_CAPAC   /* Read Capacity (10) */
 147 #define SCSI_RD_CAPAC16 0x9e            /* Read Capacity (16) */
 148 #define SCSI_RD_DEFECT  0x37            /* Read Defect Data (O) */
 149 #define SCSI_READ_LONG  0x3E            /* Read Long (O) */
 150 #define SCSI_REASS_BLK  0x07            /* Reassign Blocks (O) */
 151 #define SCSI_RCV_DIAG   0x1C            /* Receive Diagnostic Results (O) */
 152 #define SCSI_RELEASE    0x17            /* Release Unit (MANDATORY) */
 153 #define SCSI_REZERO             0x01            /* Rezero Unit (O) */
 154 #define SCSI_SRCH_DAT_E 0x31            /* Search Data Equal (O) */
 155 #define SCSI_SRCH_DAT_H 0x30            /* Search Data High (O) */
 156 #define SCSI_SRCH_DAT_L 0x32            /* Search Data Low (O) */
 157 #define SCSI_SEEK6              0x0B            /* Seek 6-Byte (O) */
 158 #define SCSI_SEEK10             0x2B            /* Seek 10-Byte (O) */
 159 #define SCSI_SEND_DIAG  0x1D            /* Send Diagnostics (MANDATORY) */
 160 #define SCSI_SET_LIMIT  0x33            /* Set Limits (O) */
 161 #define SCSI_START_STP  0x1B            /* Start/Stop Unit (O) */
 162 #define SCSI_SYNC_CACHE 0x35            /* Synchronize Cache (O) */
 163 #define SCSI_VERIFY             0x2F            /* Verify (O) */
 164 #define SCSI_WRITE6             0x0A            /* Write 6-Byte (MANDATORY) */
 165 #define SCSI_WRITE10    0x2A            /* Write 10-Byte (MANDATORY) */
 166 #define SCSI_WRT_VERIFY 0x2E            /* Write and Verify (O) */
 167 #define SCSI_WRITE_LONG 0x3F            /* Write Long (O) */
 168 #define SCSI_WRITE_SAME 0x41            /* Write Same (O) */
 169
 170 /**
 171  * struct scsi_plat - stores information about SCSI controller
 172  *
 173  * @base: Controller base address
 174  * @max_lun: Maximum number of logical units
 175  * @max_id: Maximum number of target ids
 176  * @max_bytes_per_req: Maximum number of bytes per read/write request
 177  */
 178 struct scsi_plat {
 179         unsigned long base;
 180         unsigned long max_lun;
 181         unsigned long max_id;
 182         unsigned long max_bytes_per_req;
 183 };
 184
 185 /* Operations for SCSI */
 186 struct scsi_ops {
 187         /**
 188          * exec() - execute a command
 189          *
 190          * @dev:        SCSI bus
 191          * @cmd:        Command to execute
 192          * @return 0 if OK, -ve on error
 193          */
 194         int (*exec)(struct udevice *dev, struct scsi_cmd *cmd);
 195
 196         /**
 197          * bus_reset() - reset the bus
 198          *
 199          * @dev:        SCSI bus to reset
 200          * @return 0 if OK, -ve on error
 201          */
 202         int (*bus_reset)(struct udevice *dev);
 203 };
 204
 205 #define scsi_get_ops(dev)        ((struct scsi_ops *)(dev)->driver->ops)
 206
 207 extern struct scsi_ops scsi_ops;
 208
 209 /**
 210  * scsi_exec() - execute a command
 211  *
 212  * @dev:        SCSI bus
 213  * @cmd:        Command to execute
 214  * Return: 0 if OK, -ve on error
 215  */
 216 int scsi_exec(struct udevice *dev, struct scsi_cmd *cmd);
 217
 218 /**
 219  * scsi_bus_reset() - reset the bus
 220  *
 221  * @dev:        SCSI bus to reset
 222  * Return: 0 if OK, -ve on error
 223  */
 224 int scsi_bus_reset(struct udevice *dev);
 225
 226 /**
 227  * scsi_scan() - Scan all SCSI controllers for available devices
 228  *
 229  * @vebose: true to show information about each device found
 230  */
 231 int scsi_scan(bool verbose);
 232
 233 /**
 234  * scsi_scan_dev() - scan a SCSI bus and create devices
 235  *
 236  * @dev:        SCSI bus
 237  * @verbose:    true to show information about each device found
 238  */
 239 int scsi_scan_dev(struct udevice *dev, bool verbose);
 240
 241 #ifndef CONFIG_DM_SCSI
 242 void scsi_low_level_init(int busdevfunc);
 243 void scsi_init(void);
 244 #endif
 245
 246 #define SCSI_IDENTIFY                                   0xC0  /* not used */
 247
 248 /* Hardware errors  */
 249 #define SCSI_SEL_TIME_OUT                        0x00000101      /* Selection time out */
 250 #define SCSI_HNS_TIME_OUT                        0x00000102  /* Handshake */
 251 #define SCSI_MA_TIME_OUT                         0x00000103  /* Phase error */
 252 #define SCSI_UNEXP_DIS                           0x00000104  /* unexpected disconnect */
 253
 254 #define SCSI_INT_STATE                           0x00010000  /* unknown Interrupt number is stored in 16 LSB */
 255
 256 #endif /* _SCSI_H */