2 * Common SPI flash Interface
4 * Copyright (C) 2008 Atmel Corporation
5 * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
7 * See file CREDITS for list of people who contributed to this
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * version 2 as published by the Free Software Foundation.
19 #include <linux/types.h>
20 #include <linux/compiler.h>
22 /* No enum list for write commands only QPP */
25 /* Enum list - Full read commands */
28 DUAL_OUTPUT_FAST
= 1 << 1,
29 DUAL_IO_FAST
= 1 << 2,
30 QUAD_OUTPUT_FAST
= 1 << 3,
31 QUAD_IO_FAST
= 1 << 4,
33 #define RD_EXTN ARRAY_SLOW | DUAL_OUTPUT_FAST | DUAL_IO_FAST
34 #define RD_FULL RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST
37 * struct spi_flash_params - SPI/QSPI flash device params structure
39 * @name: Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO])
40 * @jedec: Device jedec ID (0x[1byte_manuf_id][2byte_dev_id])
41 * @ext_jedec: Device ext_jedec ID
42 * @sector_size: Sector size of this device
43 * @nr_sectors: No.of sectors on this device
44 * @e_rd_cmd: Enum list for read commands
45 * @flags: Importent param, for flash specific behaviour
47 struct spi_flash_params
{
57 extern const struct spi_flash_params spi_flash_params_table
[];
60 * struct spi_flash - SPI flash structure
63 * @name: Name of SPI flash
64 * @size: Total flash size
65 * @page_size: Write (page) size
66 * @sector_size: Sector size
67 * @erase_size: Erase size
68 * @bank_read_cmd: Bank read cmd
69 * @bank_write_cmd: Bank write cmd
70 * @bank_curr: Current flash bank
71 * @poll_cmd: Poll cmd - for flash erase/program
72 * @erase_cmd: Erase cmd 4K, 32K, 64K
73 * @read_cmd: Read cmd - Array Fast, Extn read and quad read.
74 * @write_cmd: Write cmd - page and quad program.
75 * @dummy_byte: Dummy cycles for read operation.
76 * @memory_map: Address of read-only SPI flash access
77 * @read: Flash read ops: Read len bytes at offset into buf
78 * Supported cmds: Fast Array Read
79 * @write: Flash write ops: Write len bytes from buf into offeset
80 * Supported cmds: Page Program
81 * @erase: Flash erase ops: Erase len bytes from offset
82 * Supported cmds: Sector erase 4K, 32K, 64K
83 * return 0 - Sucess, 1 - Failure
86 struct spi_slave
*spi
;
93 #ifdef CONFIG_SPI_FLASH_BAR
105 int (*read
)(struct spi_flash
*flash
, u32 offset
, size_t len
, void *buf
);
106 int (*write
)(struct spi_flash
*flash
, u32 offset
, size_t len
,
108 int (*erase
)(struct spi_flash
*flash
, u32 offset
, size_t len
);
111 struct spi_flash
*spi_flash_probe(unsigned int bus
, unsigned int cs
,
112 unsigned int max_hz
, unsigned int spi_mode
);
115 * Set up a new SPI flash from an fdt node
117 * @param blob Device tree blob
118 * @param slave_node Pointer to this SPI slave node in the device tree
119 * @param spi_node Cached pointer to the SPI interface this node belongs
121 * @return 0 if ok, -1 on error
123 struct spi_flash
*spi_flash_probe_fdt(const void *blob
, int slave_node
,
126 void spi_flash_free(struct spi_flash
*flash
);
128 static inline int spi_flash_read(struct spi_flash
*flash
, u32 offset
,
129 size_t len
, void *buf
)
131 return flash
->read(flash
, offset
, len
, buf
);
134 static inline int spi_flash_write(struct spi_flash
*flash
, u32 offset
,
135 size_t len
, const void *buf
)
137 return flash
->write(flash
, offset
, len
, buf
);
140 static inline int spi_flash_erase(struct spi_flash
*flash
, u32 offset
,
143 return flash
->erase(flash
, offset
, len
);
146 void spi_boot(void) __noreturn
;
148 #endif /* _SPI_FLASH_H_ */