]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/usb.h
drivers/mmc/mmc.c: Fix build warning
[people/ms/u-boot.git] / include / usb.h
1 /*
2 * (C) Copyright 2001
3 * Denis Peter, MPL AG Switzerland
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 *
23 * Note: Part of this code has been derived from linux
24 *
25 */
26 #ifndef _USB_H_
27 #define _USB_H_
28
29 #include <usb_defs.h>
30 #include <usbdescriptors.h>
31
32 /* Everything is aribtrary */
33 #define USB_ALTSETTINGALLOC 4
34 #define USB_MAXALTSETTING 128 /* Hard limit */
35
36 #define USB_MAX_DEVICE 32
37 #define USB_MAXCONFIG 8
38 #define USB_MAXINTERFACES 8
39 #define USB_MAXENDPOINTS 16
40 #define USB_MAXCHILDREN 8 /* This is arbitrary */
41 #define USB_MAX_HUB 16
42
43 #define USB_CNTL_TIMEOUT 100 /* 100ms timeout */
44
45 /*
46 * This is the timeout to allow for submitting an urb in ms. We allow more
47 * time for a BULK device to react - some are slow.
48 */
49 #define USB_TIMEOUT_MS(pipe) (usb_pipebulk(pipe) ? 5000 : 1000)
50
51 /* device request (setup) */
52 struct devrequest {
53 unsigned char requesttype;
54 unsigned char request;
55 unsigned short value;
56 unsigned short index;
57 unsigned short length;
58 } __attribute__ ((packed));
59
60 /* All standard descriptors have these 2 fields in common */
61 struct usb_descriptor_header {
62 unsigned char bLength;
63 unsigned char bDescriptorType;
64 } __attribute__ ((packed));
65
66 /* Interface */
67 struct usb_interface {
68 struct usb_interface_descriptor desc;
69
70 unsigned char no_of_ep;
71 unsigned char num_altsetting;
72 unsigned char act_altsetting;
73
74 struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS];
75 } __attribute__ ((packed));
76
77 /* Configuration information.. */
78 struct usb_config {
79 struct usb_configuration_descriptor desc;
80
81 unsigned char no_of_if; /* number of interfaces */
82 struct usb_interface if_desc[USB_MAXINTERFACES];
83 } __attribute__ ((packed));
84
85 enum {
86 /* Maximum packet size; encoded as 0,1,2,3 = 8,16,32,64 */
87 PACKET_SIZE_8 = 0,
88 PACKET_SIZE_16 = 1,
89 PACKET_SIZE_32 = 2,
90 PACKET_SIZE_64 = 3,
91 };
92
93 struct usb_device {
94 int devnum; /* Device number on USB bus */
95 int speed; /* full/low/high */
96 char mf[32]; /* manufacturer */
97 char prod[32]; /* product */
98 char serial[32]; /* serial number */
99
100 /* Maximum packet size; one of: PACKET_SIZE_* */
101 int maxpacketsize;
102 /* one bit for each endpoint ([0] = IN, [1] = OUT) */
103 unsigned int toggle[2];
104 /* endpoint halts; one bit per endpoint # & direction;
105 * [0] = IN, [1] = OUT
106 */
107 unsigned int halted[2];
108 int epmaxpacketin[16]; /* INput endpoint specific maximums */
109 int epmaxpacketout[16]; /* OUTput endpoint specific maximums */
110
111 int configno; /* selected config number */
112 struct usb_device_descriptor descriptor; /* Device Descriptor */
113 struct usb_config config; /* config descriptor */
114
115 int have_langid; /* whether string_langid is valid yet */
116 int string_langid; /* language ID for strings */
117 int (*irq_handle)(struct usb_device *dev);
118 unsigned long irq_status;
119 int irq_act_len; /* transfered bytes */
120 void *privptr;
121 /*
122 * Child devices - if this is a hub device
123 * Each instance needs its own set of data structures.
124 */
125 unsigned long status;
126 int act_len; /* transfered bytes */
127 int maxchild; /* Number of ports if hub */
128 int portnr;
129 struct usb_device *parent;
130 struct usb_device *children[USB_MAXCHILDREN];
131 };
132
133 /**********************************************************************
134 * this is how the lowlevel part communicate with the outer world
135 */
136
137 #if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || \
138 defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_OHCI_NEW) || \
139 defined(CONFIG_USB_SL811HS) || defined(CONFIG_USB_ISP116X_HCD) || \
140 defined(CONFIG_USB_R8A66597_HCD) || defined(CONFIG_USB_DAVINCI) || \
141 defined(CONFIG_USB_OMAP3) || defined(CONFIG_USB_DA8XX) || \
142 defined(CONFIG_USB_BLACKFIN) || defined(CONFIG_USB_AM35X)
143
144 int usb_lowlevel_init(void);
145 int usb_lowlevel_stop(void);
146 int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
147 void *buffer, int transfer_len);
148 int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
149 int transfer_len, struct devrequest *setup);
150 int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
151 int transfer_len, int interval);
152
153 /* Defines */
154 #define USB_UHCI_VEND_ID 0x8086
155 #define USB_UHCI_DEV_ID 0x7112
156
157 #else
158 #error USB Lowlevel not defined
159 #endif
160
161 #ifdef CONFIG_USB_STORAGE
162
163 #define USB_MAX_STOR_DEV 5
164 block_dev_desc_t *usb_stor_get_dev(int index);
165 int usb_stor_scan(int mode);
166 int usb_stor_info(void);
167
168 #endif
169
170 #ifdef CONFIG_USB_HOST_ETHER
171
172 #define USB_MAX_ETH_DEV 5
173 int usb_host_eth_scan(int mode);
174
175 #endif
176
177 #ifdef CONFIG_USB_KEYBOARD
178
179 int drv_usb_kbd_init(void);
180 int usb_kbd_deregister(void);
181
182 #endif
183 /* routines */
184 int usb_init(void); /* initialize the USB Controller */
185 int usb_stop(void); /* stop the USB Controller */
186
187
188 int usb_set_protocol(struct usb_device *dev, int ifnum, int protocol);
189 int usb_set_idle(struct usb_device *dev, int ifnum, int duration,
190 int report_id);
191 struct usb_device *usb_get_dev_index(int index);
192 int usb_control_msg(struct usb_device *dev, unsigned int pipe,
193 unsigned char request, unsigned char requesttype,
194 unsigned short value, unsigned short index,
195 void *data, unsigned short size, int timeout);
196 int usb_bulk_msg(struct usb_device *dev, unsigned int pipe,
197 void *data, int len, int *actual_length, int timeout);
198 int usb_submit_int_msg(struct usb_device *dev, unsigned long pipe,
199 void *buffer, int transfer_len, int interval);
200 int usb_disable_asynch(int disable);
201 int usb_maxpacket(struct usb_device *dev, unsigned long pipe);
202 int usb_get_configuration_no(struct usb_device *dev, unsigned char *buffer,
203 int cfgno);
204 int usb_get_report(struct usb_device *dev, int ifnum, unsigned char type,
205 unsigned char id, void *buf, int size);
206 int usb_get_class_descriptor(struct usb_device *dev, int ifnum,
207 unsigned char type, unsigned char id, void *buf,
208 int size);
209 int usb_clear_halt(struct usb_device *dev, int pipe);
210 int usb_string(struct usb_device *dev, int index, char *buf, size_t size);
211 int usb_set_interface(struct usb_device *dev, int interface, int alternate);
212
213 /* big endian -> little endian conversion */
214 /* some CPUs are already little endian e.g. the ARM920T */
215 #define __swap_16(x) \
216 ({ unsigned short x_ = (unsigned short)x; \
217 (unsigned short)( \
218 ((x_ & 0x00FFU) << 8) | ((x_ & 0xFF00U) >> 8)); \
219 })
220 #define __swap_32(x) \
221 ({ unsigned long x_ = (unsigned long)x; \
222 (unsigned long)( \
223 ((x_ & 0x000000FFUL) << 24) | \
224 ((x_ & 0x0000FF00UL) << 8) | \
225 ((x_ & 0x00FF0000UL) >> 8) | \
226 ((x_ & 0xFF000000UL) >> 24)); \
227 })
228
229 #ifdef __LITTLE_ENDIAN
230 # define swap_16(x) (x)
231 # define swap_32(x) (x)
232 #else
233 # define swap_16(x) __swap_16(x)
234 # define swap_32(x) __swap_32(x)
235 #endif
236
237 /*
238 * Calling this entity a "pipe" is glorifying it. A USB pipe
239 * is something embarrassingly simple: it basically consists
240 * of the following information:
241 * - device number (7 bits)
242 * - endpoint number (4 bits)
243 * - current Data0/1 state (1 bit)
244 * - direction (1 bit)
245 * - speed (2 bits)
246 * - max packet size (2 bits: 8, 16, 32 or 64)
247 * - pipe type (2 bits: control, interrupt, bulk, isochronous)
248 *
249 * That's 18 bits. Really. Nothing more. And the USB people have
250 * documented these eighteen bits as some kind of glorious
251 * virtual data structure.
252 *
253 * Let's not fall in that trap. We'll just encode it as a simple
254 * unsigned int. The encoding is:
255 *
256 * - max size: bits 0-1 (00 = 8, 01 = 16, 10 = 32, 11 = 64)
257 * - direction: bit 7 (0 = Host-to-Device [Out],
258 * (1 = Device-to-Host [In])
259 * - device: bits 8-14
260 * - endpoint: bits 15-18
261 * - Data0/1: bit 19
262 * - speed: bit 26 (0 = Full, 1 = Low Speed, 2 = High)
263 * - pipe type: bits 30-31 (00 = isochronous, 01 = interrupt,
264 * 10 = control, 11 = bulk)
265 *
266 * Why? Because it's arbitrary, and whatever encoding we select is really
267 * up to us. This one happens to share a lot of bit positions with the UHCI
268 * specification, so that much of the uhci driver can just mask the bits
269 * appropriately.
270 */
271 /* Create various pipes... */
272 #define create_pipe(dev,endpoint) \
273 (((dev)->devnum << 8) | ((endpoint) << 15) | \
274 ((dev)->speed << 26) | (dev)->maxpacketsize)
275 #define default_pipe(dev) ((dev)->speed << 26)
276
277 #define usb_sndctrlpipe(dev, endpoint) ((PIPE_CONTROL << 30) | \
278 create_pipe(dev, endpoint))
279 #define usb_rcvctrlpipe(dev, endpoint) ((PIPE_CONTROL << 30) | \
280 create_pipe(dev, endpoint) | \
281 USB_DIR_IN)
282 #define usb_sndisocpipe(dev, endpoint) ((PIPE_ISOCHRONOUS << 30) | \
283 create_pipe(dev, endpoint))
284 #define usb_rcvisocpipe(dev, endpoint) ((PIPE_ISOCHRONOUS << 30) | \
285 create_pipe(dev, endpoint) | \
286 USB_DIR_IN)
287 #define usb_sndbulkpipe(dev, endpoint) ((PIPE_BULK << 30) | \
288 create_pipe(dev, endpoint))
289 #define usb_rcvbulkpipe(dev, endpoint) ((PIPE_BULK << 30) | \
290 create_pipe(dev, endpoint) | \
291 USB_DIR_IN)
292 #define usb_sndintpipe(dev, endpoint) ((PIPE_INTERRUPT << 30) | \
293 create_pipe(dev, endpoint))
294 #define usb_rcvintpipe(dev, endpoint) ((PIPE_INTERRUPT << 30) | \
295 create_pipe(dev, endpoint) | \
296 USB_DIR_IN)
297 #define usb_snddefctrl(dev) ((PIPE_CONTROL << 30) | \
298 default_pipe(dev))
299 #define usb_rcvdefctrl(dev) ((PIPE_CONTROL << 30) | \
300 default_pipe(dev) | \
301 USB_DIR_IN)
302
303 /* The D0/D1 toggle bits */
304 #define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> ep) & 1)
305 #define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << ep))
306 #define usb_settoggle(dev, ep, out, bit) ((dev)->toggle[out] = \
307 ((dev)->toggle[out] & \
308 ~(1 << ep)) | ((bit) << ep))
309
310 /* Endpoint halt control/status */
311 #define usb_endpoint_out(ep_dir) (((ep_dir >> 7) & 1) ^ 1)
312 #define usb_endpoint_halt(dev, ep, out) ((dev)->halted[out] |= (1 << (ep)))
313 #define usb_endpoint_running(dev, ep, out) ((dev)->halted[out] &= ~(1 << (ep)))
314 #define usb_endpoint_halted(dev, ep, out) ((dev)->halted[out] & (1 << (ep)))
315
316 #define usb_packetid(pipe) (((pipe) & USB_DIR_IN) ? USB_PID_IN : \
317 USB_PID_OUT)
318
319 #define usb_pipeout(pipe) ((((pipe) >> 7) & 1) ^ 1)
320 #define usb_pipein(pipe) (((pipe) >> 7) & 1)
321 #define usb_pipedevice(pipe) (((pipe) >> 8) & 0x7f)
322 #define usb_pipe_endpdev(pipe) (((pipe) >> 8) & 0x7ff)
323 #define usb_pipeendpoint(pipe) (((pipe) >> 15) & 0xf)
324 #define usb_pipedata(pipe) (((pipe) >> 19) & 1)
325 #define usb_pipespeed(pipe) (((pipe) >> 26) & 3)
326 #define usb_pipeslow(pipe) (usb_pipespeed(pipe) == USB_SPEED_LOW)
327 #define usb_pipetype(pipe) (((pipe) >> 30) & 3)
328 #define usb_pipeisoc(pipe) (usb_pipetype((pipe)) == PIPE_ISOCHRONOUS)
329 #define usb_pipeint(pipe) (usb_pipetype((pipe)) == PIPE_INTERRUPT)
330 #define usb_pipecontrol(pipe) (usb_pipetype((pipe)) == PIPE_CONTROL)
331 #define usb_pipebulk(pipe) (usb_pipetype((pipe)) == PIPE_BULK)
332
333
334 /*************************************************************************
335 * Hub Stuff
336 */
337 struct usb_port_status {
338 unsigned short wPortStatus;
339 unsigned short wPortChange;
340 } __attribute__ ((packed));
341
342 struct usb_hub_status {
343 unsigned short wHubStatus;
344 unsigned short wHubChange;
345 } __attribute__ ((packed));
346
347
348 /* Hub descriptor */
349 struct usb_hub_descriptor {
350 unsigned char bLength;
351 unsigned char bDescriptorType;
352 unsigned char bNbrPorts;
353 unsigned short wHubCharacteristics;
354 unsigned char bPwrOn2PwrGood;
355 unsigned char bHubContrCurrent;
356 unsigned char DeviceRemovable[(USB_MAXCHILDREN+1+7)/8];
357 unsigned char PortPowerCtrlMask[(USB_MAXCHILDREN+1+7)/8];
358 /* DeviceRemovable and PortPwrCtrlMask want to be variable-length
359 bitmaps that hold max 255 entries. (bit0 is ignored) */
360 } __attribute__ ((packed));
361
362
363 struct usb_hub_device {
364 struct usb_device *pusb_dev;
365 struct usb_hub_descriptor desc;
366 };
367
368 int usb_hub_probe(struct usb_device *dev, int ifnum);
369 void usb_hub_reset(void);
370 int hub_port_reset(struct usb_device *dev, int port,
371 unsigned short *portstat);
372
373 struct usb_device *usb_alloc_new_device(void);
374 int usb_new_device(struct usb_device *dev);
375
376 #endif /*_USB_H_ */