1 # SPDX-License-Identifier: GPL-2.0-only
4 default "$(CC_VERSION_TEXT)"
6 This is used in unclear ways:
8 - Re-run Kconfig when the compiler is updated
9 The 'default' property references the environment variable,
10 CC_VERSION_TEXT so it is recorded in include/config/auto.conf.cmd.
11 When the compiler is updated, Kconfig will be invoked.
13 - Ensure full rebuild when the compiler is updated
14 include/linux/compiler-version.h contains this option in the comment
15 line so fixdep adds include/config/CC_VERSION_TEXT into the
16 auto-generated dependency. When the compiler is updated, syncconfig
17 will touch it and then every file will be rebuilt.
20 def_bool $(success,test "$(cc-name)" = GCC)
24 default $(cc-version) if CC_IS_GCC
28 def_bool $(success,test "$(cc-name)" = Clang)
32 default $(cc-version) if CC_IS_CLANG
36 def_bool $(success,test "$(as-name)" = GNU)
39 def_bool $(success,test "$(as-name)" = LLVM)
43 # Use clang version if this is the integrated assembler
44 default CLANG_VERSION if AS_IS_LLVM
48 def_bool $(success,test "$(ld-name)" = BFD)
52 default $(ld-version) if LD_IS_BFD
56 def_bool $(success,test "$(ld-name)" = LLD)
60 default $(ld-version) if LD_IS_LLD
63 config RUST_IS_AVAILABLE
64 def_bool $(success,$(srctree)/scripts/rust_is_available.sh)
66 This shows whether a suitable Rust toolchain is available (found).
68 Please see Documentation/rust/quick-start.rst for instructions on how
69 to satisfy the build requirements of Rust support.
71 In particular, the Makefile target 'rustavailable' is useful to check
72 why the Rust toolchain is not being detected.
76 default $(success,$(srctree)/scripts/cc-can-link.sh $(CC) $(CLANG_FLAGS) $(USERCFLAGS) $(USERLDFLAGS) $(m64-flag)) if 64BIT
77 default $(success,$(srctree)/scripts/cc-can-link.sh $(CC) $(CLANG_FLAGS) $(USERCFLAGS) $(USERLDFLAGS) $(m32-flag))
79 config CC_CAN_LINK_STATIC
81 default $(success,$(srctree)/scripts/cc-can-link.sh $(CC) $(CLANG_FLAGS) $(USERCFLAGS) $(USERLDFLAGS) $(m64-flag) -static) if 64BIT
82 default $(success,$(srctree)/scripts/cc-can-link.sh $(CC) $(CLANG_FLAGS) $(USERCFLAGS) $(USERLDFLAGS) $(m32-flag) -static)
84 config CC_HAS_ASM_GOTO_OUTPUT
85 def_bool $(success,echo 'int foo(int x) { asm goto ("": "=r"(x) ::: bar); return x; bar: return 0; }' | $(CC) -x c - -c -o /dev/null)
87 config CC_HAS_ASM_GOTO_TIED_OUTPUT
88 depends on CC_HAS_ASM_GOTO_OUTPUT
89 # Detect buggy gcc and clang, fixed in gcc-11 clang-14.
90 def_bool $(success,echo 'int foo(int *x) { asm goto (".long (%l[bar]) - .": "+m"(*x) ::: bar); return *x; bar: return 0; }' | $CC -x c - -c -o /dev/null)
92 config TOOLS_SUPPORT_RELR
93 def_bool $(success,env "CC=$(CC)" "LD=$(LD)" "NM=$(NM)" "OBJCOPY=$(OBJCOPY)" $(srctree)/scripts/tools-support-relr.sh)
95 config CC_HAS_ASM_INLINE
96 def_bool $(success,echo 'void foo(void) { asm inline (""); }' | $(CC) -x c - -c -o /dev/null)
98 config CC_HAS_NO_PROFILE_FN_ATTR
99 def_bool $(success,echo '__attribute__((no_profile_instrument_function)) int x();' | $(CC) -x c - -c -o /dev/null -Werror)
101 config PAHOLE_VERSION
103 default $(shell,$(srctree)/scripts/pahole-version.sh $(PAHOLE))
111 config BUILDTIME_TABLE_SORT
114 config THREAD_INFO_IN_TASK
117 Select this to move thread_info off the stack into task_struct. To
118 make this work, an arch will need to remove all thread_info fields
119 except flags and fix any runtime bugs.
121 One subtle change that will be needed is to use try_get_task_stack()
122 and put_task_stack() in save_thread_stack_tsk() and get_wchan().
131 depends on BROKEN || !SMP
134 config INIT_ENV_ARG_LIMIT
139 Maximum of each of the number of arguments and environment
140 variables passed to init from the kernel command line.
143 bool "Compile also drivers which will not load"
146 Some drivers can be compiled on a different platform than they are
147 intended to be run on. Despite they cannot be loaded there (or even
148 when they load they cannot be used due to missing HW support),
149 developers still, opposing to distributors, might want to build such
150 drivers to compile-test them.
152 If you are a developer and want to build everything available, say Y
153 here. If you are a user/distributor, say N here to exclude useless
154 drivers to be distributed.
157 bool "Compile the kernel with warnings as errors"
160 A kernel build should not cause any compiler warnings, and this
161 enables the '-Werror' (for C) and '-Dwarnings' (for Rust) flags
162 to enforce that rule by default. Certain warnings from other tools
163 such as the linker may be upgraded to errors with this option as
166 However, if you have a new (or very old) compiler or linker with odd
167 and unusual warnings, or you have some architecture with problems,
168 you may need to disable this config option in order to
169 successfully build the kernel.
173 config UAPI_HEADER_TEST
174 bool "Compile test UAPI headers"
175 depends on HEADERS_INSTALL && CC_CAN_LINK
177 Compile test headers exported to user-space to ensure they are
178 self-contained, i.e. compilable as standalone units.
180 If you are a developer or tester and want to ensure the exported
181 headers are self-contained, say Y here. Otherwise, choose N.
184 string "Local version - append to kernel release"
186 Append an extra string to the end of your kernel version.
187 This will show up when you type uname, for example.
188 The string you set here will be appended after the contents of
189 any files with a filename matching localversion* in your
190 object and source tree, in that order. Your total string can
191 be a maximum of 64 characters.
193 config LOCALVERSION_AUTO
194 bool "Automatically append version information to the version string"
196 depends on !COMPILE_TEST
198 This will try to automatically determine if the current tree is a
199 release tree by looking for git tags that belong to the current
200 top of tree revision.
202 A string of the format -gxxxxxxxx will be added to the localversion
203 if a git-based tree is found. The string generated by this will be
204 appended after any matching localversion* files, and after the value
205 set in CONFIG_LOCALVERSION.
207 (The actual string used here is the first 12 characters produced
208 by running the command:
210 $ git rev-parse --verify HEAD
212 which is done within the script "scripts/setlocalversion".)
215 string "Build ID Salt"
218 The build ID is used to link binaries and their debug info. Setting
219 this option will use the value in the calculation of the build id.
220 This is mostly useful for distributions which want to ensure the
221 build is unique between builds. It's safe to leave the default.
223 config HAVE_KERNEL_GZIP
226 config HAVE_KERNEL_BZIP2
229 config HAVE_KERNEL_LZMA
232 config HAVE_KERNEL_XZ
235 config HAVE_KERNEL_LZO
238 config HAVE_KERNEL_LZ4
241 config HAVE_KERNEL_ZSTD
244 config HAVE_KERNEL_UNCOMPRESSED
248 prompt "Kernel compression mode"
250 depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA || HAVE_KERNEL_XZ || HAVE_KERNEL_LZO || HAVE_KERNEL_LZ4 || HAVE_KERNEL_ZSTD || HAVE_KERNEL_UNCOMPRESSED
252 The linux kernel is a kind of self-extracting executable.
253 Several compression algorithms are available, which differ
254 in efficiency, compression and decompression speed.
255 Compression speed is only relevant when building a kernel.
256 Decompression speed is relevant at each boot.
258 If you have any problems with bzip2 or lzma compressed
259 kernels, mail me (Alain Knaff) <alain@knaff.lu>. (An older
260 version of this functionality (bzip2 only), for 2.4, was
261 supplied by Christian Ludwig)
263 High compression options are mostly useful for users, who
264 are low on disk space (embedded systems), but for whom ram
267 If in doubt, select 'gzip'
271 depends on HAVE_KERNEL_GZIP
273 The old and tried gzip compression. It provides a good balance
274 between compression ratio and decompression speed.
278 depends on HAVE_KERNEL_BZIP2
280 Its compression ratio and speed is intermediate.
281 Decompression speed is slowest among the choices. The kernel
282 size is about 10% smaller with bzip2, in comparison to gzip.
283 Bzip2 uses a large amount of memory. For modern kernels you
284 will need at least 8MB RAM or more for booting.
288 depends on HAVE_KERNEL_LZMA
290 This compression algorithm's ratio is best. Decompression speed
291 is between gzip and bzip2. Compression is slowest.
292 The kernel size is about 33% smaller with LZMA in comparison to gzip.
296 depends on HAVE_KERNEL_XZ
298 XZ uses the LZMA2 algorithm and instruction set specific
299 BCJ filters which can improve compression ratio of executable
300 code. The size of the kernel is about 30% smaller with XZ in
301 comparison to gzip. On architectures for which there is a BCJ
302 filter (i386, x86_64, ARM, IA-64, PowerPC, and SPARC), XZ
303 will create a few percent smaller kernel than plain LZMA.
305 The speed is about the same as with LZMA: The decompression
306 speed of XZ is better than that of bzip2 but worse than gzip
307 and LZO. Compression is slow.
311 depends on HAVE_KERNEL_LZO
313 Its compression ratio is the poorest among the choices. The kernel
314 size is about 10% bigger than gzip; however its speed
315 (both compression and decompression) is the fastest.
319 depends on HAVE_KERNEL_LZ4
321 LZ4 is an LZ77-type compressor with a fixed, byte-oriented encoding.
322 A preliminary version of LZ4 de/compression tool is available at
323 <https://code.google.com/p/lz4/>.
325 Its compression ratio is worse than LZO. The size of the kernel
326 is about 8% bigger than LZO. But the decompression speed is
331 depends on HAVE_KERNEL_ZSTD
333 ZSTD is a compression algorithm targeting intermediate compression
334 with fast decompression speed. It will compress better than GZIP and
335 decompress around the same speed as LZO, but slower than LZ4. You
336 will need at least 192 KB RAM or more for booting. The zstd command
337 line tool is required for compression.
339 config KERNEL_UNCOMPRESSED
341 depends on HAVE_KERNEL_UNCOMPRESSED
343 Produce uncompressed kernel image. This option is usually not what
344 you want. It is useful for debugging the kernel in slow simulation
345 environments, where decompressing and moving the kernel is awfully
346 slow. This option allows early boot code to skip the decompressor
347 and jump right at uncompressed kernel image.
352 string "Default init path"
355 This option determines the default init for the system if no init=
356 option is passed on the kernel command line. If the requested path is
357 not present, we will still then move on to attempting further
358 locations (e.g. /sbin/init, etc). If this is empty, we will just use
359 the fallback list when init= is not passed.
361 config DEFAULT_HOSTNAME
362 string "Default hostname"
365 This option determines the default system hostname before userspace
366 calls sethostname(2). The kernel traditionally uses "(none)" here,
367 but you may wish to use a different default here to make a minimal
368 system more usable with less configuration.
373 Inter Process Communication is a suite of library functions and
374 system calls which let processes (running programs) synchronize and
375 exchange information. It is generally considered to be a good thing,
376 and some programs won't run unless you say Y here. In particular, if
377 you want to run the DOS emulator dosemu under Linux (read the
378 DOSEMU-HOWTO, available from <http://www.tldp.org/docs.html#howto>),
379 you'll need to say Y here.
381 You can find documentation about IPC with "info ipc" and also in
382 section 6.4 of the Linux Programmer's Guide, available from
383 <http://www.tldp.org/guides.html>.
385 config SYSVIPC_SYSCTL
391 config SYSVIPC_COMPAT
393 depends on COMPAT && SYSVIPC
396 bool "POSIX Message Queues"
399 POSIX variant of message queues is a part of IPC. In POSIX message
400 queues every message has a priority which decides about succession
401 of receiving it by a process. If you want to compile and run
402 programs written e.g. for Solaris with use of its POSIX message
403 queues (functions mq_*) say Y here.
405 POSIX message queues are visible as a filesystem called 'mqueue'
406 and can be mounted somewhere if you want to do filesystem
407 operations on message queues.
411 config POSIX_MQUEUE_SYSCTL
413 depends on POSIX_MQUEUE
418 bool "General notification queue"
422 This is a general notification queue for the kernel to pass events to
423 userspace by splicing them into pipes. It can be used in conjunction
424 with watches for key/keyring change notifications and device
427 See Documentation/core-api/watch_queue.rst
429 config CROSS_MEMORY_ATTACH
430 bool "Enable process_vm_readv/writev syscalls"
434 Enabling this option adds the system calls process_vm_readv and
435 process_vm_writev which allow a process with the correct privileges
436 to directly read from or write to another process' address space.
437 See the man page for more details.
440 bool "uselib syscall (for libc5 and earlier)"
441 default ALPHA || M68K || SPARC
443 This option enables the uselib syscall, a system call used in the
444 dynamic linker from libc5 and earlier. glibc does not use this
445 system call. If you intend to run programs built on libc5 or
446 earlier, you may need to enable this syscall. Current systems
447 running glibc can safely disable this.
450 bool "Auditing support"
453 Enable auditing infrastructure that can be used with another
454 kernel subsystem, such as SELinux (which requires this for
455 logging of avc messages output). System call auditing is included
456 on architectures which support it.
458 config HAVE_ARCH_AUDITSYSCALL
463 depends on AUDIT && HAVE_ARCH_AUDITSYSCALL
466 source "kernel/irq/Kconfig"
467 source "kernel/time/Kconfig"
468 source "kernel/bpf/Kconfig"
469 source "kernel/Kconfig.preempt"
471 menu "CPU/Task time and stats accounting"
473 config VIRT_CPU_ACCOUNTING
477 prompt "Cputime accounting"
478 default TICK_CPU_ACCOUNTING
480 # Kind of a stub config for the pure tick based cputime accounting
481 config TICK_CPU_ACCOUNTING
482 bool "Simple tick based cputime accounting"
483 depends on !S390 && !NO_HZ_FULL
485 This is the basic tick based cputime accounting that maintains
486 statistics about user, system and idle time spent on per jiffies
491 config VIRT_CPU_ACCOUNTING_NATIVE
492 bool "Deterministic task and CPU time accounting"
493 depends on HAVE_VIRT_CPU_ACCOUNTING && !NO_HZ_FULL
494 select VIRT_CPU_ACCOUNTING
496 Select this option to enable more accurate task and CPU time
497 accounting. This is done by reading a CPU counter on each
498 kernel entry and exit and on transitions within the kernel
499 between system, softirq and hardirq state, so there is a
500 small performance impact. In the case of s390 or IBM POWER > 5,
501 this also enables accounting of stolen time on logically-partitioned
504 config VIRT_CPU_ACCOUNTING_GEN
505 bool "Full dynticks CPU time accounting"
506 depends on HAVE_CONTEXT_TRACKING_USER
507 depends on HAVE_VIRT_CPU_ACCOUNTING_GEN
508 depends on GENERIC_CLOCKEVENTS
509 select VIRT_CPU_ACCOUNTING
510 select CONTEXT_TRACKING_USER
512 Select this option to enable task and CPU time accounting on full
513 dynticks systems. This accounting is implemented by watching every
514 kernel-user boundaries using the context tracking subsystem.
515 The accounting is thus performed at the expense of some significant
518 For now this is only useful if you are working on the full
519 dynticks subsystem development.
525 config IRQ_TIME_ACCOUNTING
526 bool "Fine granularity task level IRQ time accounting"
527 depends on HAVE_IRQ_TIME_ACCOUNTING && !VIRT_CPU_ACCOUNTING_NATIVE
529 Select this option to enable fine granularity task irq time
530 accounting. This is done by reading a timestamp on each
531 transitions between softirq and hardirq state, so there can be a
532 small performance impact.
534 If in doubt, say N here.
536 config HAVE_SCHED_AVG_IRQ
538 depends on IRQ_TIME_ACCOUNTING || PARAVIRT_TIME_ACCOUNTING
541 config SCHED_THERMAL_PRESSURE
543 default y if ARM && ARM_CPU_TOPOLOGY
546 depends on CPU_FREQ_THERMAL
548 Select this option to enable thermal pressure accounting in the
549 scheduler. Thermal pressure is the value conveyed to the scheduler
550 that reflects the reduction in CPU compute capacity resulted from
551 thermal throttling. Thermal throttling occurs when the performance of
552 a CPU is capped due to high operating temperatures.
554 If selected, the scheduler will be able to balance tasks accordingly,
555 i.e. put less load on throttled CPUs than on non/less throttled ones.
557 This requires the architecture to implement
558 arch_update_thermal_pressure() and arch_scale_thermal_pressure().
560 config BSD_PROCESS_ACCT
561 bool "BSD Process Accounting"
564 If you say Y here, a user level program will be able to instruct the
565 kernel (via a special system call) to write process accounting
566 information to a file: whenever a process exits, information about
567 that process will be appended to the file by the kernel. The
568 information includes things such as creation time, owning user,
569 command name, memory usage, controlling terminal etc. (the complete
570 list is in the struct acct in <file:include/linux/acct.h>). It is
571 up to the user level program to do useful things with this
572 information. This is generally a good idea, so say Y.
574 config BSD_PROCESS_ACCT_V3
575 bool "BSD Process Accounting version 3 file format"
576 depends on BSD_PROCESS_ACCT
579 If you say Y here, the process accounting information is written
580 in a new file format that also logs the process IDs of each
581 process and its parent. Note that this file format is incompatible
582 with previous v0/v1/v2 file formats, so you will need updated tools
583 for processing it. A preliminary version of these tools is available
584 at <http://www.gnu.org/software/acct/>.
587 bool "Export task/process statistics through netlink"
592 Export selected statistics for tasks/processes through the
593 generic netlink interface. Unlike BSD process accounting, the
594 statistics are available during the lifetime of tasks/processes as
595 responses to commands. Like BSD accounting, they are sent to user
600 config TASK_DELAY_ACCT
601 bool "Enable per-task delay accounting"
605 Collect information on time spent by a task waiting for system
606 resources like cpu, synchronous block I/O completion and swapping
607 in pages. Such statistics can help in setting a task's priorities
608 relative to other tasks for cpu, io, rss limits etc.
613 bool "Enable extended accounting over taskstats"
616 Collect extended task accounting data and send the data
617 to userland for processing over the taskstats interface.
621 config TASK_IO_ACCOUNTING
622 bool "Enable per-task storage I/O accounting"
623 depends on TASK_XACCT
625 Collect information on the number of bytes of storage I/O which this
631 bool "Pressure stall information tracking"
634 Collect metrics that indicate how overcommitted the CPU, memory,
635 and IO capacity are in the system.
637 If you say Y here, the kernel will create /proc/pressure/ with the
638 pressure statistics files cpu, memory, and io. These will indicate
639 the share of walltime in which some or all tasks in the system are
640 delayed due to contention of the respective resource.
642 In kernels with cgroup support, cgroups (cgroup2 only) will
643 have cpu.pressure, memory.pressure, and io.pressure files,
644 which aggregate pressure stalls for the grouped tasks only.
646 For more details see Documentation/accounting/psi.rst.
650 config PSI_DEFAULT_DISABLED
651 bool "Require boot parameter to enable pressure stall information tracking"
655 If set, pressure stall information tracking will be disabled
656 per default but can be enabled through passing psi=1 on the
657 kernel commandline during boot.
659 This feature adds some code to the task wakeup and sleep
660 paths of the scheduler. The overhead is too low to affect
661 common scheduling-intense workloads in practice (such as
662 webservers, memcache), but it does show up in artificial
663 scheduler stress tests, such as hackbench.
665 If you are paranoid and not sure what the kernel will be
670 endmenu # "CPU/Task time and stats accounting"
674 depends on SMP || COMPILE_TEST
677 Make sure that CPUs running critical tasks are not disturbed by
678 any source of "noise" such as unbound workqueues, timers, kthreads...
679 Unbound jobs get offloaded to housekeeping CPUs. This is driven by
680 the "isolcpus=" boot parameter.
684 source "kernel/rcu/Kconfig"
687 tristate "Kernel .config support"
689 This option enables the complete Linux kernel ".config" file
690 contents to be saved in the kernel. It provides documentation
691 of which kernel options are used in a running kernel or in an
692 on-disk kernel. This information can be extracted from the kernel
693 image file with the script scripts/extract-ikconfig and used as
694 input to rebuild the current kernel or to build another kernel.
695 It can also be extracted from a running kernel by reading
696 /proc/config.gz if enabled (below).
699 bool "Enable access to .config through /proc/config.gz"
700 depends on IKCONFIG && PROC_FS
702 This option enables access to the kernel configuration file
703 through /proc/config.gz.
706 tristate "Enable kernel headers through /sys/kernel/kheaders.tar.xz"
709 This option enables access to the in-kernel headers that are generated during
710 the build process. These can be used to build eBPF tracing programs,
711 or similar programs. If you build the headers as a module, a module called
712 kheaders.ko is built which can be loaded on-demand to get access to headers.
715 int "Kernel log buffer size (16 => 64KB, 17 => 128KB)"
720 Select the minimal kernel log buffer size as a power of 2.
721 The final size is affected by LOG_CPU_MAX_BUF_SHIFT config
722 parameter, see below. Any higher size also might be forced
723 by "log_buf_len" boot parameter.
733 config LOG_CPU_MAX_BUF_SHIFT
734 int "CPU kernel log buffer size contribution (13 => 8 KB, 17 => 128KB)"
737 default 12 if !BASE_SMALL
738 default 0 if BASE_SMALL
741 This option allows to increase the default ring buffer size
742 according to the number of CPUs. The value defines the contribution
743 of each CPU as a power of 2. The used space is typically only few
744 lines however it might be much more when problems are reported,
747 The increased size means that a new buffer has to be allocated and
748 the original static one is unused. It makes sense only on systems
749 with more CPUs. Therefore this value is used only when the sum of
750 contributions is greater than the half of the default kernel ring
751 buffer as defined by LOG_BUF_SHIFT. The default values are set
752 so that more than 16 CPUs are needed to trigger the allocation.
754 Also this option is ignored when "log_buf_len" kernel parameter is
755 used as it forces an exact (power of two) size of the ring buffer.
757 The number of possible CPUs is used for this computation ignoring
758 hotplugging making the computation optimal for the worst case
759 scenario while allowing a simple algorithm to be used from bootup.
761 Examples shift values and their meaning:
762 17 => 128 KB for each CPU
763 16 => 64 KB for each CPU
764 15 => 32 KB for each CPU
765 14 => 16 KB for each CPU
766 13 => 8 KB for each CPU
767 12 => 4 KB for each CPU
770 bool "Printk indexing debugfs interface"
771 depends on PRINTK && DEBUG_FS
773 Add support for indexing of all printk formats known at compile time
774 at <debugfs>/printk/index/<module>.
776 This can be used as part of maintaining daemons which monitor
777 /dev/kmsg, as it permits auditing the printk formats present in a
778 kernel, allowing detection of cases where monitored printks are
779 changed or no longer present.
781 There is no additional runtime cost to printk with this enabled.
784 # Architectures with an unreliable sched_clock() should select this:
786 config HAVE_UNSTABLE_SCHED_CLOCK
789 config GENERIC_SCHED_CLOCK
792 menu "Scheduler features"
795 bool "Enable utilization clamping for RT/FAIR tasks"
796 depends on CPU_FREQ_GOV_SCHEDUTIL
798 This feature enables the scheduler to track the clamped utilization
799 of each CPU based on RUNNABLE tasks scheduled on that CPU.
801 With this option, the user can specify the min and max CPU
802 utilization allowed for RUNNABLE tasks. The max utilization defines
803 the maximum frequency a task should use while the min utilization
804 defines the minimum frequency it should use.
806 Both min and max utilization clamp values are hints to the scheduler,
807 aiming at improving its frequency selection policy, but they do not
808 enforce or grant any specific bandwidth for tasks.
812 config UCLAMP_BUCKETS_COUNT
813 int "Number of supported utilization clamp buckets"
816 depends on UCLAMP_TASK
818 Defines the number of clamp buckets to use. The range of each bucket
819 will be SCHED_CAPACITY_SCALE/UCLAMP_BUCKETS_COUNT. The higher the
820 number of clamp buckets the finer their granularity and the higher
821 the precision of clamping aggregation and tracking at run-time.
823 For example, with the minimum configuration value we will have 5
824 clamp buckets tracking 20% utilization each. A 25% boosted tasks will
825 be refcounted in the [20..39]% bucket and will set the bucket clamp
826 effective value to 25%.
827 If a second 30% boosted task should be co-scheduled on the same CPU,
828 that task will be refcounted in the same bucket of the first task and
829 it will boost the bucket clamp effective value to 30%.
830 The clamp effective value of a bucket is reset to its nominal value
831 (20% in the example above) when there are no more tasks refcounted in
834 An additional boost/capping margin can be added to some tasks. In the
835 example above the 25% task will be boosted to 30% until it exits the
836 CPU. If that should be considered not acceptable on certain systems,
837 it's always possible to reduce the margin by increasing the number of
838 clamp buckets to trade off used memory for run-time tracking
841 If in doubt, use the default value.
846 # For architectures that want to enable the support for NUMA-affine scheduler
849 config ARCH_SUPPORTS_NUMA_BALANCING
853 # For architectures that prefer to flush all TLBs after a number of pages
854 # are unmapped instead of sending one IPI per page to flush. The architecture
855 # must provide guarantees on what happens if a clean TLB cache entry is
856 # written after the unmap. Details are in mm/rmap.c near the check for
857 # should_defer_flush. The architecture should also consider if the full flush
858 # and the refill costs are offset by the savings of sending fewer IPIs.
859 config ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
863 def_bool !$(cc-option,$(m64-flag) -D__SIZEOF_INT128__=0) && 64BIT
865 config CC_IMPLICIT_FALLTHROUGH
867 default "-Wimplicit-fallthrough=5" if CC_IS_GCC && $(cc-option,-Wimplicit-fallthrough=5)
868 default "-Wimplicit-fallthrough" if CC_IS_CLANG && $(cc-option,-Wunreachable-code-fallthrough)
870 # Currently, disable gcc-11+ array-bounds globally.
871 # It's still broken in gcc-13, so no upper bound yet.
872 config GCC11_NO_ARRAY_BOUNDS
875 config CC_NO_ARRAY_BOUNDS
877 default y if CC_IS_GCC && GCC_VERSION >= 110000 && GCC11_NO_ARRAY_BOUNDS
879 # Currently, disable -Wstringop-overflow for GCC globally.
880 config GCC_NO_STRINGOP_OVERFLOW
883 config CC_NO_STRINGOP_OVERFLOW
885 default y if CC_IS_GCC && GCC_NO_STRINGOP_OVERFLOW
887 config CC_STRINGOP_OVERFLOW
889 default y if CC_IS_GCC && !CC_NO_STRINGOP_OVERFLOW
892 # For architectures that know their GCC __int128 support is sound
894 config ARCH_SUPPORTS_INT128
897 # For architectures that (ab)use NUMA to represent different memory regions
898 # all cpu-local but of different latencies, such as SuperH.
900 config ARCH_WANT_NUMA_VARIABLE_LOCALITY
903 config NUMA_BALANCING
904 bool "Memory placement aware NUMA scheduler"
905 depends on ARCH_SUPPORTS_NUMA_BALANCING
906 depends on !ARCH_WANT_NUMA_VARIABLE_LOCALITY
907 depends on SMP && NUMA && MIGRATION && !PREEMPT_RT
909 This option adds support for automatic NUMA aware memory/task placement.
910 The mechanism is quite primitive and is based on migrating memory when
911 it has references to the node the task is running on.
913 This system will be inactive on UMA systems.
915 config NUMA_BALANCING_DEFAULT_ENABLED
916 bool "Automatically enable NUMA aware memory/task placement"
918 depends on NUMA_BALANCING
920 If set, automatic NUMA balancing will be enabled if running on a NUMA
924 bool "Control Group support"
927 This option adds support for grouping sets of processes together, for
928 use with process control subsystems such as Cpusets, CFS, memory
929 controls or device isolation.
931 - Documentation/scheduler/sched-design-CFS.rst (CFS)
932 - Documentation/admin-guide/cgroup-v1/ (features for grouping, isolation
933 and resource control)
942 config CGROUP_FAVOR_DYNMODS
943 bool "Favor dynamic modification latency reduction by default"
945 This option enables the "favordynmods" mount option by default
946 which reduces the latencies of dynamic cgroup modifications such
947 as task migrations and controller on/offs at the cost of making
948 hot path operations such as forks and exits more expensive.
953 bool "Memory controller"
957 Provides control over the memory footprint of tasks in a cgroup.
969 Generic block IO controller cgroup interface. This is the common
970 cgroup interface which should be used by various IO controlling
973 Currently, CFQ IO scheduler uses it to recognize task groups and
974 control disk bandwidth allocation (proportional time slice allocation)
975 to such task groups. It is also used by bio throttling logic in
976 block layer to implement upper limit in IO rates on a device.
978 This option only enables generic Block IO controller infrastructure.
979 One needs to also enable actual IO controlling logic/policy. For
980 enabling proportional weight division of disk bandwidth in CFQ, set
981 CONFIG_BFQ_GROUP_IOSCHED=y; for enabling throttling policy, set
982 CONFIG_BLK_DEV_THROTTLING=y.
984 See Documentation/admin-guide/cgroup-v1/blkio-controller.rst for more information.
986 config CGROUP_WRITEBACK
988 depends on MEMCG && BLK_CGROUP
991 menuconfig CGROUP_SCHED
992 bool "CPU controller"
995 This feature lets CPU scheduler recognize task groups and control CPU
996 bandwidth allocation to such task groups. It uses cgroups to group
1000 config FAIR_GROUP_SCHED
1001 bool "Group scheduling for SCHED_OTHER"
1002 depends on CGROUP_SCHED
1003 default CGROUP_SCHED
1005 config CFS_BANDWIDTH
1006 bool "CPU bandwidth provisioning for FAIR_GROUP_SCHED"
1007 depends on FAIR_GROUP_SCHED
1010 This option allows users to define CPU bandwidth rates (limits) for
1011 tasks running within the fair group scheduler. Groups with no limit
1012 set are considered to be unconstrained and will run with no
1014 See Documentation/scheduler/sched-bwc.rst for more information.
1016 config RT_GROUP_SCHED
1017 bool "Group scheduling for SCHED_RR/FIFO"
1018 depends on CGROUP_SCHED
1021 This feature lets you explicitly allocate real CPU bandwidth
1022 to task groups. If enabled, it will also make it impossible to
1023 schedule realtime tasks for non-root users until you allocate
1024 realtime bandwidth for them.
1025 See Documentation/scheduler/sched-rt-group.rst for more information.
1031 depends on SMP && RSEQ
1033 config UCLAMP_TASK_GROUP
1034 bool "Utilization clamping per group of tasks"
1035 depends on CGROUP_SCHED
1036 depends on UCLAMP_TASK
1039 This feature enables the scheduler to track the clamped utilization
1040 of each CPU based on RUNNABLE tasks currently scheduled on that CPU.
1042 When this option is enabled, the user can specify a min and max
1043 CPU bandwidth which is allowed for each single task in a group.
1044 The max bandwidth allows to clamp the maximum frequency a task
1045 can use, while the min bandwidth allows to define a minimum
1046 frequency a task will always use.
1048 When task group based utilization clamping is enabled, an eventually
1049 specified task-specific clamp value is constrained by the cgroup
1050 specified clamp value. Both minimum and maximum task clamping cannot
1051 be bigger than the corresponding clamping defined at task group level.
1056 bool "PIDs controller"
1058 Provides enforcement of process number limits in the scope of a
1059 cgroup. Any attempt to fork more processes than is allowed in the
1060 cgroup will fail. PIDs are fundamentally a global resource because it
1061 is fairly trivial to reach PID exhaustion before you reach even a
1062 conservative kmemcg limit. As a result, it is possible to grind a
1063 system to halt without being limited by other cgroup policies. The
1064 PIDs controller is designed to stop this from happening.
1066 It should be noted that organisational operations (such as attaching
1067 to a cgroup hierarchy) will *not* be blocked by the PIDs controller,
1068 since the PIDs limit only affects a process's ability to fork, not to
1072 bool "RDMA controller"
1074 Provides enforcement of RDMA resources defined by IB stack.
1075 It is fairly easy for consumers to exhaust RDMA resources, which
1076 can result into resource unavailability to other consumers.
1077 RDMA controller is designed to stop this from happening.
1078 Attaching processes with active RDMA resources to the cgroup
1079 hierarchy is allowed even if can cross the hierarchy's limit.
1081 config CGROUP_FREEZER
1082 bool "Freezer controller"
1084 Provides a way to freeze and unfreeze all tasks in a
1087 This option affects the ORIGINAL cgroup interface. The cgroup2 memory
1088 controller includes important in-kernel memory consumers per default.
1090 If you're using cgroup2, say N.
1092 config CGROUP_HUGETLB
1093 bool "HugeTLB controller"
1094 depends on HUGETLB_PAGE
1098 Provides a cgroup controller for HugeTLB pages.
1099 When you enable this, you can put a per cgroup limit on HugeTLB usage.
1100 The limit is enforced during page fault. Since HugeTLB doesn't
1101 support page reclaim, enforcing the limit at page fault time implies
1102 that, the application will get SIGBUS signal if it tries to access
1103 HugeTLB pages beyond its limit. This requires the application to know
1104 beforehand how much HugeTLB pages it would require for its use. The
1105 control group is tracked in the third page lru pointer. This means
1106 that we cannot use the controller with huge page less than 3 pages.
1109 bool "Cpuset controller"
1112 This option will let you create and manage CPUSETs which
1113 allow dynamically partitioning a system into sets of CPUs and
1114 Memory Nodes and assigning tasks to run only within those sets.
1115 This is primarily useful on large SMP or NUMA systems.
1119 config PROC_PID_CPUSET
1120 bool "Include legacy /proc/<pid>/cpuset file"
1124 config CGROUP_DEVICE
1125 bool "Device controller"
1127 Provides a cgroup controller implementing whitelists for
1128 devices which a process in the cgroup can mknod or open.
1130 config CGROUP_CPUACCT
1131 bool "Simple CPU accounting controller"
1133 Provides a simple controller for monitoring the
1134 total CPU consumed by the tasks in a cgroup.
1137 bool "Perf controller"
1138 depends on PERF_EVENTS
1140 This option extends the perf per-cpu mode to restrict monitoring
1141 to threads which belong to the cgroup specified and run on the
1142 designated cpu. Or this can be used to have cgroup ID in samples
1143 so that it can monitor performance events among cgroups.
1148 bool "Support for eBPF programs attached to cgroups"
1149 depends on BPF_SYSCALL
1150 select SOCK_CGROUP_DATA
1152 Allow attaching eBPF programs to a cgroup using the bpf(2)
1153 syscall command BPF_PROG_ATTACH.
1155 In which context these programs are accessed depends on the type
1156 of attachment. For instance, programs that are attached using
1157 BPF_CGROUP_INET_INGRESS will be executed on the ingress path of
1161 bool "Misc resource controller"
1164 Provides a controller for miscellaneous resources on a host.
1166 Miscellaneous scalar resources are the resources on the host system
1167 which cannot be abstracted like the other cgroups. This controller
1168 tracks and limits the miscellaneous resources used by a process
1169 attached to a cgroup hierarchy.
1171 For more information, please check misc cgroup section in
1172 /Documentation/admin-guide/cgroup-v2.rst.
1175 bool "Debug controller"
1177 depends on DEBUG_KERNEL
1179 This option enables a simple controller that exports
1180 debugging information about the cgroups framework. This
1181 controller is for control cgroup debugging only. Its
1182 interfaces are not stable.
1186 config SOCK_CGROUP_DATA
1192 menuconfig NAMESPACES
1193 bool "Namespaces support" if EXPERT
1194 depends on MULTIUSER
1197 Provides the way to make tasks work with different objects using
1198 the same id. For example same IPC id may refer to different objects
1199 or same user id or pid may refer to different tasks when used in
1200 different namespaces.
1205 bool "UTS namespace"
1208 In this namespace tasks see different info provided with the
1212 bool "TIME namespace"
1213 depends on GENERIC_VDSO_TIME_NS
1216 In this namespace boottime and monotonic clocks can be set.
1217 The time will keep going with the same pace.
1220 bool "IPC namespace"
1221 depends on (SYSVIPC || POSIX_MQUEUE)
1224 In this namespace tasks work with IPC ids which correspond to
1225 different IPC objects in different namespaces.
1228 bool "User namespace"
1231 This allows containers, i.e. vservers, to use user namespaces
1232 to provide different user info for different servers.
1234 When user namespaces are enabled in the kernel it is
1235 recommended that the MEMCG option also be enabled and that
1236 user-space use the memory control groups to limit the amount
1237 of memory a memory unprivileged users can use.
1242 bool "PID Namespaces"
1245 Support process id namespaces. This allows having multiple
1246 processes with the same pid as long as they are in different
1247 pid namespaces. This is a building block of containers.
1250 bool "Network namespace"
1254 Allow user space to create what appear to be multiple instances
1255 of the network stack.
1259 config CHECKPOINT_RESTORE
1260 bool "Checkpoint/restore support"
1262 select PROC_CHILDREN
1266 Enables additional kernel features in a sake of checkpoint/restore.
1267 In particular it adds auxiliary prctl codes to setup process text,
1268 data and heap segment sizes, and a few additional /proc filesystem
1271 If unsure, say N here.
1273 config SCHED_AUTOGROUP
1274 bool "Automatic process group scheduling"
1277 select FAIR_GROUP_SCHED
1279 This option optimizes the scheduler for common desktop workloads by
1280 automatically creating and populating task groups. This separation
1281 of workloads isolates aggressive CPU burners (like build jobs) from
1282 desktop applications. Task group autogeneration is currently based
1286 bool "Kernel->user space relay support (formerly relayfs)"
1289 This option enables support for relay interface support in
1290 certain file systems (such as debugfs).
1291 It is designed to provide an efficient mechanism for tools and
1292 facilities to relay large amounts of data from kernel space to
1297 config BLK_DEV_INITRD
1298 bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
1300 The initial RAM filesystem is a ramfs which is loaded by the
1301 boot loader (loadlin or lilo) and that is mounted as root
1302 before the normal boot procedure. It is typically used to
1303 load modules needed to mount the "real" root file system,
1304 etc. See <file:Documentation/admin-guide/initrd.rst> for details.
1306 If RAM disk support (BLK_DEV_RAM) is also included, this
1307 also enables initial RAM disk (initrd) support and adds
1308 15 Kbytes (more on some other architectures) to the kernel size.
1314 source "usr/Kconfig"
1319 bool "Boot config support"
1320 select BLK_DEV_INITRD if !BOOT_CONFIG_EMBED
1322 Extra boot config allows system admin to pass a config file as
1323 complemental extension of kernel cmdline when booting.
1324 The boot config file must be attached at the end of initramfs
1325 with checksum, size and magic word.
1326 See <file:Documentation/admin-guide/bootconfig.rst> for details.
1330 config BOOT_CONFIG_FORCE
1331 bool "Force unconditional bootconfig processing"
1332 depends on BOOT_CONFIG
1333 default y if BOOT_CONFIG_EMBED
1335 With this Kconfig option set, BOOT_CONFIG processing is carried
1336 out even when the "bootconfig" kernel-boot parameter is omitted.
1337 In fact, with this Kconfig option set, there is no way to
1338 make the kernel ignore the BOOT_CONFIG-supplied kernel-boot
1343 config BOOT_CONFIG_EMBED
1344 bool "Embed bootconfig file in the kernel"
1345 depends on BOOT_CONFIG
1347 Embed a bootconfig file given by BOOT_CONFIG_EMBED_FILE in the
1348 kernel. Usually, the bootconfig file is loaded with the initrd
1349 image. But if the system doesn't support initrd, this option will
1350 help you by embedding a bootconfig file while building the kernel.
1354 config BOOT_CONFIG_EMBED_FILE
1355 string "Embedded bootconfig file path"
1356 depends on BOOT_CONFIG_EMBED
1358 Specify a bootconfig file which will be embedded to the kernel.
1359 This bootconfig will be used if there is no initrd or no other
1360 bootconfig in the initrd.
1362 config INITRAMFS_PRESERVE_MTIME
1363 bool "Preserve cpio archive mtimes in initramfs"
1366 Each entry in an initramfs cpio archive carries an mtime value. When
1367 enabled, extracted cpio items take this mtime, with directory mtime
1368 setting deferred until after creation of any child entries.
1373 prompt "Compiler optimization level"
1374 default CC_OPTIMIZE_FOR_PERFORMANCE
1376 config CC_OPTIMIZE_FOR_PERFORMANCE
1377 bool "Optimize for performance (-O2)"
1379 This is the default optimization level for the kernel, building
1380 with the "-O2" compiler flag for best performance and most
1381 helpful compile-time warnings.
1383 config CC_OPTIMIZE_FOR_SIZE
1384 bool "Optimize for size (-Os)"
1386 Choosing this option will pass "-Os" to your compiler resulting
1387 in a smaller kernel.
1391 config HAVE_LD_DEAD_CODE_DATA_ELIMINATION
1394 This requires that the arch annotates or otherwise protects
1395 its external entry points from being discarded. Linker scripts
1396 must also merge .text.*, .data.*, and .bss.* correctly into
1397 output sections. Care must be taken not to pull in unrelated
1398 sections (e.g., '.text.init'). Typically '.' in section names
1399 is used to distinguish them from label names / C identifiers.
1401 config LD_DEAD_CODE_DATA_ELIMINATION
1402 bool "Dead code and data elimination (EXPERIMENTAL)"
1403 depends on HAVE_LD_DEAD_CODE_DATA_ELIMINATION
1405 depends on $(cc-option,-ffunction-sections -fdata-sections)
1406 depends on $(ld-option,--gc-sections)
1408 Enable this if you want to do dead code and data elimination with
1409 the linker by compiling with -ffunction-sections -fdata-sections,
1410 and linking with --gc-sections.
1412 This can reduce on disk and in-memory size of the kernel
1413 code and static data, particularly for small configs and
1414 on small systems. This has the possibility of introducing
1415 silently broken kernel if the required annotations are not
1416 present. This option is not well tested yet, so use at your
1419 config LD_ORPHAN_WARN
1421 depends on ARCH_WANT_LD_ORPHAN_WARN
1422 depends on $(ld-option,--orphan-handling=warn)
1423 depends on $(ld-option,--orphan-handling=error)
1425 config LD_ORPHAN_WARN_LEVEL
1427 depends on LD_ORPHAN_WARN
1428 default "error" if WERROR
1437 config SYSCTL_EXCEPTION_TRACE
1440 Enable support for /proc/sys/debug/exception-trace.
1442 config SYSCTL_ARCH_UNALIGN_NO_WARN
1445 Enable support for /proc/sys/kernel/ignore-unaligned-usertrap
1446 Allows arch to define/use @no_unaligned_warning to possibly warn
1447 about unaligned access emulation going on under the hood.
1449 config SYSCTL_ARCH_UNALIGN_ALLOW
1452 Enable support for /proc/sys/kernel/unaligned-trap
1453 Allows arches to define/use @unaligned_enabled to runtime toggle
1454 the unaligned access emulation.
1455 see arch/parisc/kernel/unaligned.c for reference
1457 config HAVE_PCSPKR_PLATFORM
1460 # interpreter that classic socket filters depend on
1463 select CRYPTO_LIB_SHA1
1466 bool "Configure standard kernel features (expert users)"
1467 # Unhide debug options, to make the on-by-default options visible
1470 This option allows certain base kernel options and settings
1471 to be disabled or tweaked. This is for specialized
1472 environments which can tolerate a "non-standard" kernel.
1473 Only use this if you really know what you are doing.
1476 bool "Enable 16-bit UID system calls" if EXPERT
1477 depends on HAVE_UID16 && MULTIUSER
1480 This enables the legacy 16-bit UID syscall wrappers.
1483 bool "Multiple users, groups and capabilities support" if EXPERT
1486 This option enables support for non-root users, groups and
1489 If you say N here, all processes will run with UID 0, GID 0, and all
1490 possible capabilities. Saying N here also compiles out support for
1491 system calls related to UIDs, GIDs, and capabilities, such as setuid,
1494 If unsure, say Y here.
1496 config SGETMASK_SYSCALL
1497 bool "sgetmask/ssetmask syscalls support" if EXPERT
1498 def_bool PARISC || M68K || PPC || MIPS || X86 || SPARC || MICROBLAZE || SUPERH
1500 sys_sgetmask and sys_ssetmask are obsolete system calls
1501 no longer supported in libc but still enabled by default in some
1504 If unsure, leave the default option here.
1506 config SYSFS_SYSCALL
1507 bool "Sysfs syscall support" if EXPERT
1510 sys_sysfs is an obsolete system call no longer supported in libc.
1511 Note that disabling this option is more secure but might break
1512 compatibility with some systems.
1514 If unsure say Y here.
1517 bool "open by fhandle syscalls" if EXPERT
1521 If you say Y here, a user level program will be able to map
1522 file names to handle and then later use the handle for
1523 different file system operations. This is useful in implementing
1524 userspace file servers, which now track files using handles instead
1525 of names. The handle would remain the same even if file names
1526 get renamed. Enables open_by_handle_at(2) and name_to_handle_at(2)
1530 bool "Posix Clocks & timers" if EXPERT
1533 This includes native support for POSIX timers to the kernel.
1534 Some embedded systems have no use for them and therefore they
1535 can be configured out to reduce the size of the kernel image.
1537 When this option is disabled, the following syscalls won't be
1538 available: timer_create, timer_gettime: timer_getoverrun,
1539 timer_settime, timer_delete, clock_adjtime, getitimer,
1540 setitimer, alarm. Furthermore, the clock_settime, clock_gettime,
1541 clock_getres and clock_nanosleep syscalls will be limited to
1542 CLOCK_REALTIME, CLOCK_MONOTONIC and CLOCK_BOOTTIME only.
1548 bool "Enable support for printk" if EXPERT
1551 This option enables normal printk support. Removing it
1552 eliminates most of the message strings from the kernel image
1553 and makes the kernel more or less silent. As this makes it
1554 very difficult to diagnose system problems, saying N here is
1555 strongly discouraged.
1558 bool "BUG() support" if EXPERT
1561 Disabling this option eliminates support for BUG and WARN, reducing
1562 the size of your kernel image and potentially quietly ignoring
1563 numerous fatal conditions. You should only consider disabling this
1564 option for embedded systems with no facilities for reporting errors.
1570 bool "Enable ELF core dumps" if EXPERT
1572 Enable support for generating core dumps. Disabling saves about 4k.
1575 config PCSPKR_PLATFORM
1576 bool "Enable PC-Speaker support" if EXPERT
1577 depends on HAVE_PCSPKR_PLATFORM
1581 This option allows to disable the internal PC-Speaker
1582 support, saving some memory.
1586 bool "Enable full-sized data structures for core" if EXPERT
1588 Disabling this option reduces the size of miscellaneous core
1589 kernel data structures. This saves memory on small machines,
1590 but may reduce performance.
1593 bool "Enable futex support" if EXPERT
1594 depends on !(SPARC32 && SMP)
1598 Disabling this option will cause the kernel to be built without
1599 support for "fast userspace mutexes". The resulting kernel may not
1600 run glibc-based applications correctly.
1604 depends on FUTEX && RT_MUTEXES
1608 bool "Enable eventpoll support" if EXPERT
1611 Disabling this option will cause the kernel to be built without
1612 support for epoll family of system calls.
1615 bool "Enable signalfd() system call" if EXPERT
1618 Enable the signalfd() system call that allows to receive signals
1619 on a file descriptor.
1624 bool "Enable timerfd() system call" if EXPERT
1627 Enable the timerfd() system call that allows to receive timer
1628 events on a file descriptor.
1633 bool "Enable eventfd() system call" if EXPERT
1636 Enable the eventfd() system call that allows to receive both
1637 kernel notification (ie. KAIO) or userspace notifications.
1642 bool "Use full shmem filesystem" if EXPERT
1646 The shmem is an internal filesystem used to manage shared memory.
1647 It is backed by swap and manages resource limits. It is also exported
1648 to userspace as tmpfs if TMPFS is enabled. Disabling this
1649 option replaces shmem and tmpfs with the much simpler ramfs code,
1650 which may be appropriate on small systems without swap.
1653 bool "Enable AIO support" if EXPERT
1656 This option enables POSIX asynchronous I/O which may by used
1657 by some high performance threaded applications. Disabling
1658 this option saves about 7k.
1661 bool "Enable IO uring support" if EXPERT
1665 This option enables support for the io_uring interface, enabling
1666 applications to submit and complete IO through submission and
1667 completion rings that are shared between the kernel and application.
1669 config ADVISE_SYSCALLS
1670 bool "Enable madvise/fadvise syscalls" if EXPERT
1673 This option enables the madvise and fadvise syscalls, used by
1674 applications to advise the kernel about their future memory or file
1675 usage, improving performance. If building an embedded system where no
1676 applications use these syscalls, you can disable this option to save
1680 bool "Enable membarrier() system call" if EXPERT
1683 Enable the membarrier() system call that allows issuing memory
1684 barriers across all running threads, which can be used to distribute
1685 the cost of user-space memory barriers asymmetrically by transforming
1686 pairs of memory barriers into pairs consisting of membarrier() and a
1692 bool "Enable kcmp() system call" if EXPERT
1694 Enable the kernel resource comparison system call. It provides
1695 user-space with the ability to compare two processes to see if they
1696 share a common resource, such as a file descriptor or even virtual
1702 bool "Enable rseq() system call" if EXPERT
1704 depends on HAVE_RSEQ
1707 Enable the restartable sequences system call. It provides a
1708 user-space cache for the current CPU number value, which
1709 speeds up getting the current CPU number from user-space,
1710 as well as an ABI to speed up user-space operations on
1717 bool "Enable debugging of rseq() system call" if EXPERT
1718 depends on RSEQ && DEBUG_KERNEL
1720 Enable extra debugging checks for the rseq system call.
1724 config CACHESTAT_SYSCALL
1725 bool "Enable cachestat() system call" if EXPERT
1728 Enable the cachestat system call, which queries the page cache
1729 statistics of a file (number of cached pages, dirty pages,
1730 pages marked for writeback, (recently) evicted pages).
1732 If unsure say Y here.
1735 bool "PC/104 support" if EXPERT
1737 Expose PC/104 form factor device drivers and options available for
1738 selection and configuration. Enable this option if your target
1739 machine has a PC/104 bus.
1742 bool "Load all symbols for debugging/ksymoops" if EXPERT
1745 Say Y here to let the kernel print out symbolic crash information and
1746 symbolic stack backtraces. This increases the size of the kernel
1747 somewhat, as all symbols have to be loaded into the kernel image.
1749 config KALLSYMS_SELFTEST
1750 bool "Test the basic functions and performance of kallsyms"
1754 Test the basic functions and performance of some interfaces, such as
1755 kallsyms_lookup_name. It also calculates the compression rate of the
1756 kallsyms compression algorithm for the current symbol set.
1758 Start self-test automatically after system startup. Suggest executing
1759 "dmesg | grep kallsyms_selftest" to collect test results. "finish" is
1760 displayed in the last line, indicating that the test is complete.
1763 bool "Include all symbols in kallsyms"
1764 depends on DEBUG_KERNEL && KALLSYMS
1766 Normally kallsyms only contains the symbols of functions for nicer
1767 OOPS messages and backtraces (i.e., symbols from the text and inittext
1768 sections). This is sufficient for most cases. And only if you want to
1769 enable kernel live patching, or other less common use cases (e.g.,
1770 when a debugger is used) all symbols are required (i.e., names of
1771 variables from the data sections, etc).
1773 This option makes sure that all symbols are loaded into the kernel
1774 image (i.e., symbols from all sections) in cost of increased kernel
1775 size (depending on the kernel configuration, it may be 300KiB or
1776 something like this).
1778 Say N unless you really need all symbols, or kernel live patching.
1780 config KALLSYMS_ABSOLUTE_PERCPU
1783 default X86_64 && SMP
1785 config KALLSYMS_BASE_RELATIVE
1790 Instead of emitting them as absolute values in the native word size,
1791 emit the symbol references in the kallsyms table as 32-bit entries,
1792 each containing a relative value in the range [base, base + U32_MAX]
1793 or, when KALLSYMS_ABSOLUTE_PERCPU is in effect, each containing either
1794 an absolute value in the range [0, S32_MAX] or a relative value in the
1795 range [base, base + S32_MAX], where base is the lowest relative symbol
1796 address encountered in the image.
1798 On 64-bit builds, this reduces the size of the address table by 50%,
1799 but more importantly, it results in entries whose values are build
1800 time constants, and no relocation pass is required at runtime to fix
1801 up the entries based on the runtime load address of the kernel.
1803 # end of the "standard kernel features (expert users)" menu
1805 config ARCH_HAS_MEMBARRIER_CALLBACKS
1808 config ARCH_HAS_MEMBARRIER_SYNC_CORE
1811 config HAVE_PERF_EVENTS
1814 See tools/perf/design.txt for details.
1816 config GUEST_PERF_EVENTS
1818 depends on HAVE_PERF_EVENTS
1820 config PERF_USE_VMALLOC
1823 See tools/perf/design.txt for details
1825 menu "Kernel Performance Events And Counters"
1828 bool "Kernel performance events and counters"
1829 default y if PROFILING
1830 depends on HAVE_PERF_EVENTS
1833 Enable kernel support for various performance events provided
1834 by software and hardware.
1836 Software events are supported either built-in or via the
1837 use of generic tracepoints.
1839 Most modern CPUs support performance events via performance
1840 counter registers. These registers count the number of certain
1841 types of hw events: such as instructions executed, cachemisses
1842 suffered, or branches mis-predicted - without slowing down the
1843 kernel or applications. These registers can also trigger interrupts
1844 when a threshold number of events have passed - and can thus be
1845 used to profile the code that runs on that CPU.
1847 The Linux Performance Event subsystem provides an abstraction of
1848 these software and hardware event capabilities, available via a
1849 system call and used by the "perf" utility in tools/perf/. It
1850 provides per task and per CPU counters, and it provides event
1851 capabilities on top of those.
1855 config DEBUG_PERF_USE_VMALLOC
1857 bool "Debug: use vmalloc to back perf mmap() buffers"
1858 depends on PERF_EVENTS && DEBUG_KERNEL && !PPC
1859 select PERF_USE_VMALLOC
1861 Use vmalloc memory to back perf mmap() buffers.
1863 Mostly useful for debugging the vmalloc code on platforms
1864 that don't require it.
1870 config SYSTEM_DATA_VERIFICATION
1872 select SYSTEM_TRUSTED_KEYRING
1876 select ASYMMETRIC_KEY_TYPE
1877 select ASYMMETRIC_PUBLIC_KEY_SUBTYPE
1880 select X509_CERTIFICATE_PARSER
1881 select PKCS7_MESSAGE_PARSER
1883 Provide PKCS#7 message verification using the contents of the system
1884 trusted keyring to provide public keys. This then can be used for
1885 module verification, kexec image verification and firmware blob
1889 bool "Profiling support"
1891 Say Y here to enable the extended profiling support mechanisms used
1896 depends on HAVE_RUST
1897 depends on RUST_IS_AVAILABLE
1898 depends on !MODVERSIONS
1899 depends on !GCC_PLUGINS
1900 depends on !RANDSTRUCT
1901 depends on !DEBUG_INFO_BTF || PAHOLE_HAS_LANG_EXCLUDE
1904 Enables Rust support in the kernel.
1906 This allows other Rust-related options, like drivers written in Rust,
1909 It is also required to be able to load external kernel modules
1912 See Documentation/rust/ for more information.
1916 config RUSTC_VERSION_TEXT
1919 default $(shell,command -v $(RUSTC) >/dev/null 2>&1 && $(RUSTC) --version || echo n)
1921 config BINDGEN_VERSION_TEXT
1924 default $(shell,command -v $(BINDGEN) >/dev/null 2>&1 && $(BINDGEN) --version || echo n)
1927 # Place an empty function call at each tracepoint site. Can be
1928 # dynamically changed for a probe function.
1933 source "kernel/Kconfig.kexec"
1935 endmenu # General setup
1937 source "arch/Kconfig"
1941 default y if PREEMPT_RT
1945 default 0 if BASE_FULL
1946 default 1 if !BASE_FULL
1948 config MODULE_SIG_FORMAT
1950 select SYSTEM_DATA_VERIFICATION
1952 source "kernel/module/Kconfig"
1954 config INIT_ALL_POSSIBLE
1957 Back when each arch used to define their own cpu_online_mask and
1958 cpu_possible_mask, some of them chose to initialize cpu_possible_mask
1959 with all 1s, and others with all 0s. When they were centralised,
1960 it was better to provide this option than to break all the archs
1961 and have several arch maintainers pursuing me down dark alleys.
1963 source "block/Kconfig"
1965 config PREEMPT_NOTIFIERS
1975 Build a simple ASN.1 grammar compiler that produces a bytecode output
1976 that can be interpreted by the ASN.1 stream decoder and used to
1977 inform it as to what tags are to be expected in a stream and what
1978 functions to call on what tags.
1980 source "kernel/Kconfig.locks"
1982 config ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
1985 config ARCH_HAS_SYNC_CORE_BEFORE_USERMODE
1988 # It may be useful for an architecture to override the definitions of the
1989 # SYSCALL_DEFINE() and __SYSCALL_DEFINEx() macros in <linux/syscalls.h>
1990 # and the COMPAT_ variants in <linux/compat.h>, in particular to use a
1991 # different calling convention for syscalls. They can also override the
1992 # macros for not-implemented syscalls in kernel/sys_ni.c and
1993 # kernel/time/posix-stubs.c. All these overrides need to be available in
1994 # <asm/syscall_wrapper.h>.
1995 config ARCH_HAS_SYSCALL_WRAPPER
projects / thirdparty / linux.git / blob