1 Add initial support for cm-fx6 module.
3 cm-fx6 is a module based on mx6q SoC with the following features:
5 - 1 LCD/DVI output port
15 This patch allows to boot up the module, configures the serial console,
16 the Ethernet adapter and the hearbeat led.
18 Signed-off-by: Valentin Raevsky <valentin@xxxxxxxxxxxxxx>
19 Acked-by: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
21 arch/arm/boot/dts/imx6q-cm-fx6.dts | 51 ++++++++++++++++++++++++++++++++++++++++++
22 1 file changed, 51 insertions(+)
23 create mode 100644 arch/arm/boot/dts/imx6q-cm-fx6.dts
25 diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
27 index 0000000..1080215
29 +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
32 + * Copyright 2013 CompuLab Ltd.
34 + * The code contained herein is licensed under the GNU General Public
35 + * License. You may obtain a copy of the GNU General Public License
36 + * Version 2 or later at the following locations:
38 + * http://www.opensource.org/licenses/gpl-license.html
39 + * http://www.gnu.org/copyleft/gpl.html
43 +#include "imx6q.dtsi"
46 + model = "CompuLab CM-FX6";
47 + compatible = "compulab,cm-fx6", "fsl,imx6q";
50 + reg = <0x10000000 0x80000000>;
54 + compatible = "gpio-leds";
57 + label = "Heartbeat";
58 + gpios = <&gpio2 31 0>;
59 + linux,default-trigger = "heartbeat";
65 + pinctrl-names = "default";
66 + pinctrl-0 = <&pinctrl_gpmi_nand_1>;
71 + pinctrl-names = "default";
72 + pinctrl-0 = <&pinctrl_enet_1>;
78 + pinctrl-names = "default";
79 + pinctrl-0 = <&pinctrl_uart4_1>;
82 diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
83 --- a/arch/arm/boot/dts/Makefile
84 +++ b/arch/arm/boot/dts/Makefile
87 imx6dl-wandboard.dtb \
90 imx6q-phytec-pbab01.dtb \