2 # Guess values for system-dependent variables and create Makefiles.
3 # Generated by GNU Autoconf 2.59.
5 # Copyright (C) 2003 Free Software Foundation, Inc.
6 # This configure script is free software; the Free Software Foundation
7 # gives unlimited permission to copy, distribute and modify it.
8 ## --------------------- ##
9 ## M4sh Initialization. ##
10 ## --------------------- ##
12 # Be Bourne compatible
13 if test -n "${ZSH_VERSION+set}" && (emulate sh
) >/dev
/null
2>&1; then
16 # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
17 # is contrary to our usage. Disable this feature.
18 alias -g '${1+"$@"}'='"$@"'
19 elif test -n "${BASH_VERSION+set}" && (set -o posix
) >/dev
/null
2>&1; then
22 DUALCASE
=1; export DUALCASE
# for MKS sh
24 # Support unset when possible.
25 if ( (MAIL
=60; unset MAIL
) ||
exit) >/dev
/null
2>&1; then
32 # Work around bugs in pre-3.0 UWIN ksh.
33 $as_unset ENV MAIL MAILPATH
40 LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
41 LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
44 if (set +x
; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
45 eval $as_var=C
; export $as_var
51 # Required to use basename.
52 if expr a
: '\(a\)' >/dev
/null
2>&1; then
58 if (basename /) >/dev
/null
2>&1 && test "X`basename / 2>&1`" = "X/"; then
65 # Name of the executable.
66 as_me
=`$as_basename "$0" ||
67 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
68 X"$0" : 'X\(//\)$' \| \
69 X"$0" : 'X\(/\)$' \| \
70 . : '\(.\)' 2>/dev/null ||
72 sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
73 /^X\/\(\/\/\)$/{ s//\1/; q; }
74 /^X\/\(\/\).*/{ s//\1/; q; }
78 # PATH needs CR, and LINENO needs CR and PATH.
79 # Avoid depending upon Character Ranges.
80 as_cr_letters
='abcdefghijklmnopqrstuvwxyz'
81 as_cr_LETTERS
='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
82 as_cr_Letters
=$as_cr_letters$as_cr_LETTERS
83 as_cr_digits
='0123456789'
84 as_cr_alnum
=$as_cr_Letters$as_cr_digits
86 # The user is always right.
87 if test "${PATH_SEPARATOR+set}" != set; then
88 echo "#! /bin/sh" >conf$$.sh
89 echo "exit 0" >>conf$$.sh
91 if (PATH
="/nonexistent;."; conf$$.sh
) >/dev
/null
2>&1; then
102 as_lineno_3
=`(expr $as_lineno_1 + 1) 2>/dev/null`
103 test "x$as_lineno_1" != "x$as_lineno_2" &&
104 test "x$as_lineno_3" = "x$as_lineno_2" ||
{
105 # Find who we are. Look in the path if we contain no path at all
108 *[\\/]* ) as_myself
=$0 ;;
109 *) as_save_IFS
=$IFS; IFS
=$PATH_SEPARATOR
113 test -z "$as_dir" && as_dir
=.
114 test -r "$as_dir/$0" && as_myself
=$as_dir/$0 && break
119 # We did not find ourselves, most probably we were run as `sh COMMAND'
120 # in which case we are not to be found in the path.
121 if test "x$as_myself" = x
; then
124 if test ! -f "$as_myself"; then
125 { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
126 { (exit 1); exit 1; }; }
128 case $CONFIG_SHELL in
130 as_save_IFS
=$IFS; IFS
=$PATH_SEPARATOR
131 for as_dir
in /bin
$PATH_SEPARATOR/usr
/bin
$PATH_SEPARATOR$PATH
134 test -z "$as_dir" && as_dir
=.
135 for as_base
in sh bash ksh sh5
; do
138 if ("$as_dir/$as_base" -c '
141 as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
142 test "x$as_lineno_1" != "x$as_lineno_2" &&
143 test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev
/null
; then
144 $as_unset BASH_ENV ||
test "${BASH_ENV+set}" != set ||
{ BASH_ENV
=; export BASH_ENV
; }
145 $as_unset ENV ||
test "${ENV+set}" != set ||
{ ENV
=; export ENV
; }
146 CONFIG_SHELL
=$as_dir/$as_base
148 exec "$CONFIG_SHELL" "$0" ${1+"$@"}
156 # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
157 # uniformly replaced by the line number. The first 'sed' inserts a
158 # line-number line before each line; the second 'sed' does the real
159 # work. The second script uses 'N' to pair each line-number line
160 # with the numbered line, and appends trailing '-' during
161 # substitution so that $LINENO is not a special case at line end.
162 # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
163 # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
164 sed '=' <$as_myself |
169 s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
172 s,^['$as_cr_digits']*\n,,
174 chmod +x
$as_me.lineno ||
175 { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
176 { (exit 1); exit 1; }; }
178 # Don't try to exec as it changes $[0], causing all sort of problems
179 # (the dirname of $[0] is not the place where we might find the
180 # original and so on. Autoconf is especially sensible to this).
182 # Exit status is that of the last command.
187 case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
188 *c
*,-n*) ECHO_N
= ECHO_C
='
190 *c
*,* ) ECHO_N
=-n ECHO_C
= ECHO_T
= ;;
191 *) ECHO_N
= ECHO_C
='\c' ECHO_T
= ;;
194 if expr a
: '\(a\)' >/dev
/null
2>&1; then
200 rm -f conf$$ conf$$.exe conf$$.
file
202 if ln -s conf$$.
file conf$$
2>/dev
/null
; then
203 # We could just check for DJGPP; but this test a) works b) is more generic
204 # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
205 if test -f conf$$.exe
; then
206 # Don't use ln at all; we don't have any links
211 elif ln conf$$.
file conf$$
2>/dev
/null
; then
216 rm -f conf$$ conf$$.exe conf$$.
file
218 if mkdir
-p .
2>/dev
/null
; then
221 test -d .
/-p && rmdir .
/-p
225 as_executable_p
="test -f"
227 # Sed expression to map a string onto a valid CPP name.
228 as_tr_cpp
="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
230 # Sed expression to map a string onto a valid variable name.
231 as_tr_sh
="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
235 # We need space, tab and new line, in precisely that order.
245 # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
246 # so uname gets run too.
247 ac_hostname
=`(hostname || uname -n) 2>/dev/null | sed 1q`
254 ac_default_prefix
=/usr
/local
255 ac_config_libobj_dir
=.
260 SHELL
=${CONFIG_SHELL-/bin/sh}
262 # Maximum number of lines to put in a shell here document.
263 # This variable seems obsolete. It should probably be removed, and
264 # only ac_max_sed_lines should be used.
265 : ${ac_max_here_lines=38}
267 # Identity of this package.
274 ac_unique_file
="Makefile.in"
275 ac_subst_vars
='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS MAINT enable_shared INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os target_noncanonical LN_S x_ada_cflags default_gnatlib_target LIBOBJS LTLIBOBJS'
278 # Initialize some variables set by options.
280 ac_init_version
=false
281 # The variables have the same names as the options, with
282 # dashes changed to underlines.
290 program_transform_name
=s
,x
,x
,
298 # Installation directory options.
299 # These are left unexpanded so users can "make install exec_prefix=/foo"
300 # and all the variables that are supposed to be based on exec_prefix
301 # by default will actually change.
302 # Use braces instead of parens because sh, perl, etc. also accept them.
303 bindir
='${exec_prefix}/bin'
304 sbindir
='${exec_prefix}/sbin'
305 libexecdir
='${exec_prefix}/libexec'
306 datadir
='${prefix}/share'
307 sysconfdir
='${prefix}/etc'
308 sharedstatedir
='${prefix}/com'
309 localstatedir
='${prefix}/var'
310 libdir
='${exec_prefix}/lib'
311 includedir
='${prefix}/include'
312 oldincludedir
='/usr/include'
313 infodir
='${prefix}/info'
314 mandir
='${prefix}/man'
319 # If the previous option needs an argument, assign it.
320 if test -n "$ac_prev"; then
321 eval "$ac_prev=\$ac_option"
326 ac_optarg
=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
328 # Accept the important Cygnus configure options, so we can diagnose typos.
332 -bindir |
--bindir |
--bindi |
--bind |
--bin |
--bi)
334 -bindir=* |
--bindir=* |
--bindi=* |
--bind=* |
--bin=* |
--bi=*)
337 -build |
--build |
--buil |
--bui |
--bu)
338 ac_prev
=build_alias
;;
339 -build=* |
--build=* |
--buil=* |
--bui=* |
--bu=*)
340 build_alias
=$ac_optarg ;;
342 -cache-file |
--cache-file |
--cache-fil |
--cache-fi \
343 |
--cache-f |
--cache- |
--cache |
--cach |
--cac |
--ca |
--c)
344 ac_prev
=cache_file
;;
345 -cache-file=* |
--cache-file=* |
--cache-fil=* |
--cache-fi=* \
346 |
--cache-f=* |
--cache-=* |
--cache=* |
--cach=* |
--cac=* |
--ca=* |
--c=*)
347 cache_file
=$ac_optarg ;;
350 cache_file
=config.cache
;;
352 -datadir |
--datadir |
--datadi |
--datad |
--data |
--dat |
--da)
354 -datadir=* |
--datadir=* |
--datadi=* |
--datad=* |
--data=* |
--dat=* \
356 datadir
=$ac_optarg ;;
358 -disable-* |
--disable-*)
359 ac_feature
=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
360 # Reject names that are not valid shell variable names.
361 expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev
/null
&&
362 { echo "$as_me: error: invalid feature name: $ac_feature" >&2
363 { (exit 1); exit 1; }; }
364 ac_feature
=`echo $ac_feature | sed 's/-/_/g'`
365 eval "enable_$ac_feature=no" ;;
367 -enable-* |
--enable-*)
368 ac_feature
=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
369 # Reject names that are not valid shell variable names.
370 expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev
/null
&&
371 { echo "$as_me: error: invalid feature name: $ac_feature" >&2
372 { (exit 1); exit 1; }; }
373 ac_feature
=`echo $ac_feature | sed 's/-/_/g'`
375 *=*) ac_optarg
=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
378 eval "enable_$ac_feature='$ac_optarg'" ;;
380 -exec-prefix |
--exec_prefix |
--exec-prefix |
--exec-prefi \
381 |
--exec-pref |
--exec-pre |
--exec-pr |
--exec-p |
--exec- \
382 |
--exec |
--exe |
--ex)
383 ac_prev
=exec_prefix
;;
384 -exec-prefix=* |
--exec_prefix=* |
--exec-prefix=* |
--exec-prefi=* \
385 |
--exec-pref=* |
--exec-pre=* |
--exec-pr=* |
--exec-p=* |
--exec-=* \
386 |
--exec=* |
--exe=* |
--ex=*)
387 exec_prefix
=$ac_optarg ;;
389 -gas |
--gas |
--ga |
--g)
390 # Obsolete; use --with-gas.
393 -help |
--help |
--hel |
--he |
-h)
395 -help=r
* |
--help=r
* |
--hel=r
* |
--he=r
* |
-hr*)
396 ac_init_help
=recursive
;;
397 -help=s
* |
--help=s
* |
--hel=s
* |
--he=s
* |
-hs*)
398 ac_init_help
=short
;;
400 -host |
--host |
--hos |
--ho)
401 ac_prev
=host_alias
;;
402 -host=* |
--host=* |
--hos=* |
--ho=*)
403 host_alias
=$ac_optarg ;;
405 -includedir |
--includedir |
--includedi |
--included |
--include \
406 |
--includ |
--inclu |
--incl |
--inc)
407 ac_prev
=includedir
;;
408 -includedir=* |
--includedir=* |
--includedi=* |
--included=* |
--include=* \
409 |
--includ=* |
--inclu=* |
--incl=* |
--inc=*)
410 includedir
=$ac_optarg ;;
412 -infodir |
--infodir |
--infodi |
--infod |
--info |
--inf)
414 -infodir=* |
--infodir=* |
--infodi=* |
--infod=* |
--info=* |
--inf=*)
415 infodir
=$ac_optarg ;;
417 -libdir |
--libdir |
--libdi |
--libd)
419 -libdir=* |
--libdir=* |
--libdi=* |
--libd=*)
422 -libexecdir |
--libexecdir |
--libexecdi |
--libexecd |
--libexec \
423 |
--libexe |
--libex |
--libe)
424 ac_prev
=libexecdir
;;
425 -libexecdir=* |
--libexecdir=* |
--libexecdi=* |
--libexecd=* |
--libexec=* \
426 |
--libexe=* |
--libex=* |
--libe=*)
427 libexecdir
=$ac_optarg ;;
429 -localstatedir |
--localstatedir |
--localstatedi |
--localstated \
430 |
--localstate |
--localstat |
--localsta |
--localst \
431 |
--locals |
--local |
--loca |
--loc |
--lo)
432 ac_prev
=localstatedir
;;
433 -localstatedir=* |
--localstatedir=* |
--localstatedi=* |
--localstated=* \
434 |
--localstate=* |
--localstat=* |
--localsta=* |
--localst=* \
435 |
--locals=* |
--local=* |
--loca=* |
--loc=* |
--lo=*)
436 localstatedir
=$ac_optarg ;;
438 -mandir |
--mandir |
--mandi |
--mand |
--man |
--ma |
--m)
440 -mandir=* |
--mandir=* |
--mandi=* |
--mand=* |
--man=* |
--ma=* |
--m=*)
444 # Obsolete; use --without-fp.
447 -no-create |
--no-create |
--no-creat |
--no-crea |
--no-cre \
448 |
--no-cr |
--no-c |
-n)
451 -no-recursion |
--no-recursion |
--no-recursio |
--no-recursi \
452 |
--no-recurs |
--no-recur |
--no-recu |
--no-rec |
--no-re |
--no-r)
455 -oldincludedir |
--oldincludedir |
--oldincludedi |
--oldincluded \
456 |
--oldinclude |
--oldinclud |
--oldinclu |
--oldincl |
--oldinc \
457 |
--oldin |
--oldi |
--old |
--ol |
--o)
458 ac_prev
=oldincludedir
;;
459 -oldincludedir=* |
--oldincludedir=* |
--oldincludedi=* |
--oldincluded=* \
460 |
--oldinclude=* |
--oldinclud=* |
--oldinclu=* |
--oldincl=* |
--oldinc=* \
461 |
--oldin=* |
--oldi=* |
--old=* |
--ol=* |
--o=*)
462 oldincludedir
=$ac_optarg ;;
464 -prefix |
--prefix |
--prefi |
--pref |
--pre |
--pr |
--p)
466 -prefix=* |
--prefix=* |
--prefi=* |
--pref=* |
--pre=* |
--pr=* |
--p=*)
469 -program-prefix |
--program-prefix |
--program-prefi |
--program-pref \
470 |
--program-pre |
--program-pr |
--program-p)
471 ac_prev
=program_prefix
;;
472 -program-prefix=* |
--program-prefix=* |
--program-prefi=* \
473 |
--program-pref=* |
--program-pre=* |
--program-pr=* |
--program-p=*)
474 program_prefix
=$ac_optarg ;;
476 -program-suffix |
--program-suffix |
--program-suffi |
--program-suff \
477 |
--program-suf |
--program-su |
--program-s)
478 ac_prev
=program_suffix
;;
479 -program-suffix=* |
--program-suffix=* |
--program-suffi=* \
480 |
--program-suff=* |
--program-suf=* |
--program-su=* |
--program-s=*)
481 program_suffix
=$ac_optarg ;;
483 -program-transform-name |
--program-transform-name \
484 |
--program-transform-nam |
--program-transform-na \
485 |
--program-transform-n |
--program-transform- \
486 |
--program-transform |
--program-transfor \
487 |
--program-transfo |
--program-transf \
488 |
--program-trans |
--program-tran \
489 |
--progr-tra |
--program-tr |
--program-t)
490 ac_prev
=program_transform_name
;;
491 -program-transform-name=* |
--program-transform-name=* \
492 |
--program-transform-nam=* |
--program-transform-na=* \
493 |
--program-transform-n=* |
--program-transform-=* \
494 |
--program-transform=* |
--program-transfor=* \
495 |
--program-transfo=* |
--program-transf=* \
496 |
--program-trans=* |
--program-tran=* \
497 |
--progr-tra=* |
--program-tr=* |
--program-t=*)
498 program_transform_name
=$ac_optarg ;;
500 -q |
-quiet |
--quiet |
--quie |
--qui |
--qu |
--q \
501 |
-silent |
--silent |
--silen |
--sile |
--sil)
504 -sbindir |
--sbindir |
--sbindi |
--sbind |
--sbin |
--sbi |
--sb)
506 -sbindir=* |
--sbindir=* |
--sbindi=* |
--sbind=* |
--sbin=* \
508 sbindir
=$ac_optarg ;;
510 -sharedstatedir |
--sharedstatedir |
--sharedstatedi \
511 |
--sharedstated |
--sharedstate |
--sharedstat |
--sharedsta \
512 |
--sharedst |
--shareds |
--shared |
--share |
--shar \
514 ac_prev
=sharedstatedir
;;
515 -sharedstatedir=* |
--sharedstatedir=* |
--sharedstatedi=* \
516 |
--sharedstated=* |
--sharedstate=* |
--sharedstat=* |
--sharedsta=* \
517 |
--sharedst=* |
--shareds=* |
--shared=* |
--share=* |
--shar=* \
519 sharedstatedir
=$ac_optarg ;;
521 -site |
--site |
--sit)
523 -site=* |
--site=* |
--sit=*)
526 -srcdir |
--srcdir |
--srcdi |
--srcd |
--src |
--sr)
528 -srcdir=* |
--srcdir=* |
--srcdi=* |
--srcd=* |
--src=* |
--sr=*)
531 -sysconfdir |
--sysconfdir |
--sysconfdi |
--sysconfd |
--sysconf \
532 |
--syscon |
--sysco |
--sysc |
--sys |
--sy)
533 ac_prev
=sysconfdir
;;
534 -sysconfdir=* |
--sysconfdir=* |
--sysconfdi=* |
--sysconfd=* |
--sysconf=* \
535 |
--syscon=* |
--sysco=* |
--sysc=* |
--sys=* |
--sy=*)
536 sysconfdir
=$ac_optarg ;;
538 -target |
--target |
--targe |
--targ |
--tar |
--ta |
--t)
539 ac_prev
=target_alias
;;
540 -target=* |
--target=* |
--targe=* |
--targ=* |
--tar=* |
--ta=* |
--t=*)
541 target_alias
=$ac_optarg ;;
543 -v |
-verbose |
--verbose |
--verbos |
--verbo |
--verb)
546 -version |
--version |
--versio |
--versi |
--vers |
-V)
550 ac_package
=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
551 # Reject names that are not valid shell variable names.
552 expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev
/null
&&
553 { echo "$as_me: error: invalid package name: $ac_package" >&2
554 { (exit 1); exit 1; }; }
555 ac_package
=`echo $ac_package| sed 's/-/_/g'`
557 *=*) ac_optarg
=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
560 eval "with_$ac_package='$ac_optarg'" ;;
562 -without-* |
--without-*)
563 ac_package
=`expr "x$ac_option" : 'x-*without-\(.*\)'`
564 # Reject names that are not valid shell variable names.
565 expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev
/null
&&
566 { echo "$as_me: error: invalid package name: $ac_package" >&2
567 { (exit 1); exit 1; }; }
568 ac_package
=`echo $ac_package | sed 's/-/_/g'`
569 eval "with_$ac_package=no" ;;
572 # Obsolete; use --with-x.
575 -x-includes |
--x-includes |
--x-include |
--x-includ |
--x-inclu \
576 |
--x-incl |
--x-inc |
--x-in |
--x-i)
577 ac_prev
=x_includes
;;
578 -x-includes=* |
--x-includes=* |
--x-include=* |
--x-includ=* |
--x-inclu=* \
579 |
--x-incl=* |
--x-inc=* |
--x-in=* |
--x-i=*)
580 x_includes
=$ac_optarg ;;
582 -x-libraries |
--x-libraries |
--x-librarie |
--x-librari \
583 |
--x-librar |
--x-libra |
--x-libr |
--x-lib |
--x-li |
--x-l)
584 ac_prev
=x_libraries
;;
585 -x-libraries=* |
--x-libraries=* |
--x-librarie=* |
--x-librari=* \
586 |
--x-librar=* |
--x-libra=* |
--x-libr=* |
--x-lib=* |
--x-li=* |
--x-l=*)
587 x_libraries
=$ac_optarg ;;
589 -*) { echo "$as_me: error: unrecognized option: $ac_option
590 Try \`$0 --help' for more information." >&2
591 { (exit 1); exit 1; }; }
595 ac_envvar
=`expr "x$ac_option" : 'x\([^=]*\)='`
596 # Reject names that are not valid shell variable names.
597 expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev
/null
&&
598 { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
599 { (exit 1); exit 1; }; }
600 ac_optarg
=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
601 eval "$ac_envvar='$ac_optarg'"
605 # FIXME: should be removed in autoconf 3.0.
606 echo "$as_me: WARNING: you should use --build, --host, --target" >&2
607 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev
/null
&&
608 echo "$as_me: WARNING: invalid host type: $ac_option" >&2
609 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
615 if test -n "$ac_prev"; then
616 ac_option
=--`echo $ac_prev | sed 's/_/-/g'`
617 { echo "$as_me: error: missing argument to $ac_option" >&2
618 { (exit 1); exit 1; }; }
621 # Be sure to have absolute paths.
622 for ac_var
in exec_prefix prefix
624 eval ac_val
=$
`echo $ac_var`
626 [\\/$
]* | ?
:[\\/]* | NONE |
'' ) ;;
627 *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
628 { (exit 1); exit 1; }; };;
632 # Be sure to have absolute paths.
633 for ac_var
in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
634 localstatedir libdir includedir oldincludedir infodir mandir
636 eval ac_val
=$
`echo $ac_var`
638 [\\/$
]* | ?
:[\\/]* ) ;;
639 *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
640 { (exit 1); exit 1; }; };;
644 # There might be people who depend on the old broken behavior: `$host'
645 # used to hold the argument of --host etc.
646 # FIXME: To remove some day.
651 # FIXME: To remove some day.
652 if test "x$host_alias" != x
; then
653 if test "x$build_alias" = x
; then
654 cross_compiling
=maybe
655 echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
656 If a cross compiler is detected then cross compile mode will be used." >&2
657 elif test "x$build_alias" != "x$host_alias"; then
663 test -n "$host_alias" && ac_tool_prefix
=$host_alias-
665 test "$silent" = yes && exec 6>/dev
/null
668 # Find the source files, if location was not specified.
669 if test -z "$srcdir"; then
670 ac_srcdir_defaulted
=yes
671 # Try the directory containing this script, then its parent.
672 ac_confdir
=`(dirname "$0") 2>/dev/null ||
673 $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
674 X"$0" : 'X\(//\)[^/]' \| \
675 X"$0" : 'X\(//\)$' \| \
676 X"$0" : 'X\(/\)' \| \
677 . : '\(.\)' 2>/dev/null ||
679 sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
680 /^X\(\/\/\)[^/].*/{ s//\1/; q; }
681 /^X\(\/\/\)$/{ s//\1/; q; }
682 /^X\(\/\).*/{ s//\1/; q; }
685 if test ! -r $srcdir/$ac_unique_file; then
689 ac_srcdir_defaulted
=no
691 if test ! -r $srcdir/$ac_unique_file; then
692 if test "$ac_srcdir_defaulted" = yes; then
693 { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
694 { (exit 1); exit 1; }; }
696 { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
697 { (exit 1); exit 1; }; }
700 (cd $srcdir && test -r .
/$ac_unique_file) 2>/dev
/null ||
701 { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
702 { (exit 1); exit 1; }; }
703 srcdir
=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
704 ac_env_build_alias_set
=${build_alias+set}
705 ac_env_build_alias_value
=$build_alias
706 ac_cv_env_build_alias_set
=${build_alias+set}
707 ac_cv_env_build_alias_value
=$build_alias
708 ac_env_host_alias_set
=${host_alias+set}
709 ac_env_host_alias_value
=$host_alias
710 ac_cv_env_host_alias_set
=${host_alias+set}
711 ac_cv_env_host_alias_value
=$host_alias
712 ac_env_target_alias_set
=${target_alias+set}
713 ac_env_target_alias_value
=$target_alias
714 ac_cv_env_target_alias_set
=${target_alias+set}
715 ac_cv_env_target_alias_value
=$target_alias
718 # Report the --help message.
720 if test "$ac_init_help" = "long"; then
721 # Omit some internal or obsolete options to make the list less imposing.
722 # This message is too long to be a string in the A/UX 3.1 sh.
724 \`configure' configures this package to adapt to many kinds of systems.
726 Usage: $0 [OPTION]... [VAR=VALUE]...
728 To assign environment variables (e.g., CC, CFLAGS...), specify them as
729 VAR=VALUE. See below for descriptions of some of the useful variables.
731 Defaults for the options are specified in brackets.
734 -h, --help display this help and exit
735 --help=short display options specific to this package
736 --help=recursive display the short help of all the included packages
737 -V, --version display version information and exit
738 -q, --quiet, --silent do not print \`checking...' messages
739 --cache-file=FILE cache test results in FILE [disabled]
740 -C, --config-cache alias for \`--cache-file=config.cache'
741 -n, --no-create do not create output files
742 --srcdir=DIR find the sources in DIR [configure dir or \`..']
747 Installation directories:
748 --prefix=PREFIX install architecture-independent files in PREFIX
750 --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
753 By default, \`make install' will install all the files in
754 \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
755 an installation prefix other than \`$ac_default_prefix' using \`--prefix',
756 for instance \`--prefix=\$HOME'.
758 For better control, use the options below.
760 Fine tuning of the installation directories:
761 --bindir=DIR user executables [EPREFIX/bin]
762 --sbindir=DIR system admin executables [EPREFIX/sbin]
763 --libexecdir=DIR program executables [EPREFIX/libexec]
764 --datadir=DIR read-only architecture-independent data [PREFIX/share]
765 --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
766 --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
767 --localstatedir=DIR modifiable single-machine data [PREFIX/var]
768 --libdir=DIR object code libraries [EPREFIX/lib]
769 --includedir=DIR C header files [PREFIX/include]
770 --oldincludedir=DIR C header files for non-gcc [/usr/include]
771 --infodir=DIR info documentation [PREFIX/info]
772 --mandir=DIR man documentation [PREFIX/man]
778 --build=BUILD configure
for building on BUILD
[guessed
]
779 --host=HOST cross-compile to build programs to run on HOST
[BUILD
]
780 --target=TARGET configure
for building compilers
for TARGET
[HOST
]
784 if test -n "$ac_init_help"; then
789 --disable-FEATURE do not include FEATURE
(same as
--enable-FEATURE=no
)
790 --enable-FEATURE[=ARG
] include FEATURE
[ARG
=yes]
791 --enable-maintainer-mode
792 enable make rules and dependencies not useful
(and
793 sometimes confusing
) to the casual installer
794 --disable-shared don
't provide a shared libgnat
799 if test "$ac_init_help" = "recursive"; then
800 # If there are subdirs, report their specific --help.
802 for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
803 test -d $ac_dir || continue
806 if test "$ac_dir" != .; then
807 ac_dir_suffix=/`echo "$ac_dir" | sed 's
,^\.
[\\/],,'`
808 # A "../" for each directory in $ac_dir_suffix.
809 ac_top_builddir=`echo "$ac_dir_suffix" | sed 's
,/[^
\\/]*,..
/,g
'`
811 ac_dir_suffix= ac_top_builddir=
815 .) # No --srcdir option. We are building in place.
817 if test -z "$ac_top_builddir"; then
820 ac_top_srcdir=`echo $ac_top_builddir | sed 's
,/$
,,'`
822 [\\/]* | ?:[\\/]* ) # Absolute path.
823 ac_srcdir=$srcdir$ac_dir_suffix;
824 ac_top_srcdir=$srcdir ;;
826 ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
827 ac_top_srcdir=$ac_top_builddir$srcdir ;;
830 # Do not use `cd foo && pwd` to compute absolute paths, because
831 # the directories may not exist.
833 .) ac_abs_builddir="$ac_dir";;
836 .) ac_abs_builddir=`pwd`;;
837 [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
838 *) ac_abs_builddir=`pwd`/"$ac_dir";;
841 case $ac_abs_builddir in
842 .) ac_abs_top_builddir=${ac_top_builddir}.;;
844 case ${ac_top_builddir}. in
845 .) ac_abs_top_builddir=$ac_abs_builddir;;
846 [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
847 *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
850 case $ac_abs_builddir in
851 .) ac_abs_srcdir=$ac_srcdir;;
854 .) ac_abs_srcdir=$ac_abs_builddir;;
855 [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
856 *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
859 case $ac_abs_builddir in
860 .) ac_abs_top_srcdir=$ac_top_srcdir;;
862 case $ac_top_srcdir in
863 .) ac_abs_top_srcdir=$ac_abs_builddir;;
864 [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
865 *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
870 # Check for guested configure; otherwise get Cygnus style configure.
871 if test -f $ac_srcdir/configure.gnu; then
873 $SHELL $ac_srcdir/configure.gnu --help=recursive
874 elif test -f $ac_srcdir/configure; then
876 $SHELL $ac_srcdir/configure --help=recursive
877 elif test -f $ac_srcdir/configure.ac ||
878 test -f $ac_srcdir/configure.in; then
882 echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
888 test -n "$ac_init_help" && exit 0
889 if $ac_init_version; then
892 Copyright (C) 2003 Free Software Foundation, Inc.
893 This configure script is free software; the Free Software Foundation
894 gives unlimited permission to copy, distribute and modify it.
900 This file contains any messages produced by compilers while
901 running configure, to aid debugging if configure makes a mistake.
903 It was created by $as_me, which was
904 generated by GNU Autoconf 2.59. Invocation command line was
915 hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
916 uname -m = `(uname -m) 2>/dev/null || echo unknown`
917 uname -r = `(uname -r) 2>/dev/null || echo unknown`
918 uname -s = `(uname -s) 2>/dev/null || echo unknown`
919 uname -v = `(uname -v) 2>/dev/null || echo unknown`
921 /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
922 /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
924 /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
925 /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
926 /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
927 hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
928 /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
929 /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
930 /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
934 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
938 test -z "$as_dir" && as_dir=.
954 # Keep a trace of the command line.
955 # Strip out --no-create and --no-recursion so they do not pile up.
956 # Strip out --silent because we don't want to record it
for future runs.
957 # Also quote any args containing shell meta-characters.
958 # Make two passes to allow for proper duplicate-argument suppression.
963 ac_must_keep_next
=false
969 -no-create |
--no-c* |
-n |
-no-recursion |
--no-r*) continue ;;
970 -q |
-quiet |
--quiet |
--quie |
--qui |
--qu |
--q \
971 |
-silent |
--silent |
--silen |
--sile |
--sil)
973 *" "*|
*" "*|
*[\
[\
]\~\
#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
974 ac_arg
=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
977 1) ac_configure_args0
="$ac_configure_args0 '$ac_arg'" ;;
979 ac_configure_args1
="$ac_configure_args1 '$ac_arg'"
980 if test $ac_must_keep_next = true
; then
981 ac_must_keep_next
=false
# Got value, back to normal.
984 *=* |
--config-cache |
-C |
-disable-* |
--disable-* \
985 |
-enable-* |
--enable-* |
-gas |
--g* |
-nfp |
--nf* \
986 |
-q |
-quiet |
--q* |
-silent |
--sil* |
-v |
-verb* \
987 |
-with-* |
--with-* |
-without-* |
--without-* |
--x)
988 case "$ac_configure_args0 " in
989 "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
992 -* ) ac_must_keep_next
=true
;;
995 ac_configure_args
="$ac_configure_args$ac_sep'$ac_arg'"
996 # Get rid of the leading space.
1002 $as_unset ac_configure_args0 ||
test "${ac_configure_args0+set}" != set ||
{ ac_configure_args0
=; export ac_configure_args0
; }
1003 $as_unset ac_configure_args1 ||
test "${ac_configure_args1+set}" != set ||
{ ac_configure_args1
=; export ac_configure_args1
; }
1005 # When interrupted or exit'd, cleanup temporary files, and complete
1006 # config.log. We remove comments because anyway the quotes in there
1007 # would cause problems or look ugly.
1008 # WARNING: Be sure not to use single quotes in there, as some shells,
1009 # such as our DU 5.0 friend, will then `close' the trap.
1010 trap 'exit_status=$?
1011 # Save into config.log some information that might help in debugging.
1016 ## ---------------- ##
1017 ## Cache variables. ##
1018 ## ---------------- ##
1021 # The following way of writing the cache mishandles newlines in values,
1024 case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
1027 "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
1028 s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
1032 "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
1039 ## ----------------- ##
1040 ## Output variables. ##
1041 ## ----------------- ##
1044 for ac_var in $ac_subst_vars
1046 eval ac_val=$`echo $ac_var`
1047 echo "$ac_var='"'"'$ac_val'"'"'"
1051 if test -n "$ac_subst_files"; then
1058 for ac_var in $ac_subst_files
1060 eval ac_val=$`echo $ac_var`
1061 echo "$ac_var='"'"'$ac_val'"'"'"
1066 if test -s confdefs.h; then
1073 sed "/^$/d" confdefs.h | sort
1076 test "$ac_signal" != 0 &&
1077 echo "$as_me: caught signal $ac_signal"
1078 echo "$as_me: exit $exit_status"
1080 rm -f core *.core &&
1081 rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
1084 for ac_signal
in 1 2 13 15; do
1085 trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
1089 # confdefs.h avoids OS command line length limits that DEFS can exceed.
1090 rm -rf conftest
* confdefs.h
1091 # AIX cpp loses on an empty file, so make sure it contains at least a newline.
1094 # Predefined preprocessor variables.
1096 cat >>confdefs.h
<<_ACEOF
1097 #define PACKAGE_NAME "$PACKAGE_NAME"
1101 cat >>confdefs.h
<<_ACEOF
1102 #define PACKAGE_TARNAME "$PACKAGE_TARNAME"
1106 cat >>confdefs.h
<<_ACEOF
1107 #define PACKAGE_VERSION "$PACKAGE_VERSION"
1111 cat >>confdefs.h
<<_ACEOF
1112 #define PACKAGE_STRING "$PACKAGE_STRING"
1116 cat >>confdefs.h
<<_ACEOF
1117 #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
1121 # Let the site file select an alternate cache file if it wants to.
1122 # Prefer explicitly selected file to automatically selected ones.
1123 if test -z "$CONFIG_SITE"; then
1124 if test "x$prefix" != xNONE
; then
1125 CONFIG_SITE
="$prefix/share/config.site $prefix/etc/config.site"
1127 CONFIG_SITE
="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
1130 for ac_site_file
in $CONFIG_SITE; do
1131 if test -r "$ac_site_file"; then
1132 { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
1133 echo "$as_me: loading site script $ac_site_file" >&6;}
1134 sed 's/^/| /' "$ac_site_file" >&5
1139 if test -r "$cache_file"; then
1140 # Some versions of bash will fail to source /dev/null (special
1141 # files actually), so we avoid doing that.
1142 if test -f "$cache_file"; then
1143 { echo "$as_me:$LINENO: loading cache $cache_file" >&5
1144 echo "$as_me: loading cache $cache_file" >&6;}
1146 [\\/]* | ?
:[\\/]* ) .
$cache_file;;
1147 *) . .
/$cache_file;;
1151 { echo "$as_me:$LINENO: creating cache $cache_file" >&5
1152 echo "$as_me: creating cache $cache_file" >&6;}
1156 # Check that the precious variables saved in the cache have kept the same
1158 ac_cache_corrupted
=false
1159 for ac_var
in `(set) 2>&1 |
1160 sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
1161 eval ac_old_set
=\
$ac_cv_env_${ac_var}_set
1162 eval ac_new_set
=\
$ac_env_${ac_var}_set
1163 eval ac_old_val
="\$ac_cv_env_${ac_var}_value"
1164 eval ac_new_val
="\$ac_env_${ac_var}_value"
1165 case $ac_old_set,$ac_new_set in
1167 { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
1168 echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
1169 ac_cache_corrupted
=: ;;
1171 { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
1172 echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
1173 ac_cache_corrupted
=: ;;
1176 if test "x$ac_old_val" != "x$ac_new_val"; then
1177 { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
1178 echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
1179 { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
1180 echo "$as_me: former value: $ac_old_val" >&2;}
1181 { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
1182 echo "$as_me: current value: $ac_new_val" >&2;}
1183 ac_cache_corrupted
=:
1186 # Pass precious variables to config.status.
1187 if test "$ac_new_set" = set; then
1189 *" "*|
*" "*|
*[\
[\
]\~\
#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
1190 ac_arg
=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
1191 *) ac_arg
=$ac_var=$ac_new_val ;;
1193 case " $ac_configure_args " in
1194 *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
1195 *) ac_configure_args
="$ac_configure_args '$ac_arg'" ;;
1199 if $ac_cache_corrupted; then
1200 { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
1201 echo "$as_me: error: changes in the environment can compromise the build" >&2;}
1202 { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
1203 echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
1204 { (exit 1); exit 1; }; }
1208 ac_cpp
='$CPP $CPPFLAGS'
1209 ac_compile
='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
1210 ac_link
='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
1211 ac_compiler_gnu
=$ac_cv_c_compiler_gnu
1235 # Command-line options.
1236 # Very limited version of AC_MAINTAINER_MODE.
1237 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
1238 if test "${enable_maintainer_mode+set}" = set; then
1239 enableval
="$enable_maintainer_mode"
1240 case ${enable_maintainer_mode} in
1243 *) { { echo "$as_me:$LINENO: error: --enable-maintainer-mode must be yes or no" >&5
1244 echo "$as_me: error: --enable-maintainer-mode must be yes or no" >&2;}
1245 { (exit 1); exit 1; }; } ;;
1247 maintainer_mode
=${enableval}
1252 # Check whether --enable-shared or --disable-shared was given.
1253 if test "${enable_shared+set}" = set; then
1254 enableval
="$enable_shared"
1256 case $enable_shared in
1260 IFS
="${IFS= }"; ac_save_ifs
="$IFS"; IFS
="${IFS}:,"
1261 for pkg
in $enableval; do
1264 enable_shared
=yes ;;
1276 # Start of actual configure tests
1279 for ac_dir
in $srcdir $srcdir/..
$srcdir/..
/..
; do
1280 if test -f $ac_dir/install-sh
; then
1282 ac_install_sh
="$ac_aux_dir/install-sh -c"
1284 elif test -f $ac_dir/install.sh
; then
1286 ac_install_sh
="$ac_aux_dir/install.sh -c"
1288 elif test -f $ac_dir/shtool
; then
1290 ac_install_sh
="$ac_aux_dir/shtool install -c"
1294 if test -z "$ac_aux_dir"; then
1295 { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
1296 echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
1297 { (exit 1); exit 1; }; }
1299 ac_config_guess
="$SHELL $ac_aux_dir/config.guess"
1300 ac_config_sub
="$SHELL $ac_aux_dir/config.sub"
1301 ac_configure
="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
1303 # Find a good install program. We prefer a C program (faster),
1304 # so one script is as good as another. But avoid the broken or
1305 # incompatible versions:
1306 # SysV /etc/install, /usr/sbin/install
1307 # SunOS /usr/etc/install
1308 # IRIX /sbin/install
1310 # AmigaOS /C/install, which installs bootblocks on floppy discs
1311 # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
1312 # AFS /usr/afsws/bin/install, which mishandles nonexistent args
1313 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
1314 # OS/2's system install, which has a completely different semantic
1315 # ./install, which can be erroneously created by make from ./install.sh.
1316 echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
1317 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
1318 if test -z "$INSTALL"; then
1319 if test "${ac_cv_path_install+set}" = set; then
1320 echo $ECHO_N "(cached) $ECHO_C" >&6
1322 as_save_IFS
=$IFS; IFS
=$PATH_SEPARATOR
1326 test -z "$as_dir" && as_dir
=.
1327 # Account for people who put trailing slashes in PATH elements.
1329 .
/ | .
// |
/cC
/* | \
1330 /etc
/* |
/usr
/sbin
/* |
/usr
/etc
/* |
/sbin
/* |
/usr
/afsws
/bin
/* | \
1331 ?
:\\/os2
\\/install\\/* | ?
:\\/OS2
\\/INSTALL
\\/* | \
1334 # OSF1 and SCO ODT 3.0 have their own names for install.
1335 # Don't use installbsd from OSF since it installs stuff as root
1337 for ac_prog
in ginstall scoinst
install; do
1338 for ac_exec_ext
in '' $ac_executable_extensions; do
1339 if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
1340 if test $ac_prog = install &&
1341 grep dspmsg
"$as_dir/$ac_prog$ac_exec_ext" >/dev
/null
2>&1; then
1342 # AIX install. It has an incompatible calling convention.
1344 elif test $ac_prog = install &&
1345 grep pwplus
"$as_dir/$ac_prog$ac_exec_ext" >/dev
/null
2>&1; then
1346 # program-specific install script used by HP pwplus--don't use.
1349 ac_cv_path_install
="$as_dir/$ac_prog$ac_exec_ext -c"
1361 if test "${ac_cv_path_install+set}" = set; then
1362 INSTALL
=$ac_cv_path_install
1364 # As a last resort, use the slow shell script. We don't cache a
1365 # path for INSTALL within a source directory, because that will
1366 # break other packages using the cache if that directory is
1367 # removed, or if the path is relative.
1368 INSTALL
=$ac_install_sh
1371 echo "$as_me:$LINENO: result: $INSTALL" >&5
1372 echo "${ECHO_T}$INSTALL" >&6
1374 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
1375 # It thinks the first close brace ends the variable substitution.
1376 test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM
='${INSTALL}'
1378 test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT
='${INSTALL}'
1380 test -z "$INSTALL_DATA" && INSTALL_DATA
='${INSTALL} -m 644'
1383 # Make sure we can run config.sub.
1384 $ac_config_sub sun4
>/dev
/null
2>&1 ||
1385 { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
1386 echo "$as_me: error: cannot run $ac_config_sub" >&2;}
1387 { (exit 1); exit 1; }; }
1389 echo "$as_me:$LINENO: checking build system type" >&5
1390 echo $ECHO_N "checking build system type... $ECHO_C" >&6
1391 if test "${ac_cv_build+set}" = set; then
1392 echo $ECHO_N "(cached) $ECHO_C" >&6
1394 ac_cv_build_alias
=$build_alias
1395 test -z "$ac_cv_build_alias" &&
1396 ac_cv_build_alias
=`$ac_config_guess`
1397 test -z "$ac_cv_build_alias" &&
1398 { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
1399 echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
1400 { (exit 1); exit 1; }; }
1401 ac_cv_build
=`$ac_config_sub $ac_cv_build_alias` ||
1402 { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
1403 echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
1404 { (exit 1); exit 1; }; }
1407 echo "$as_me:$LINENO: result: $ac_cv_build" >&5
1408 echo "${ECHO_T}$ac_cv_build" >&6
1410 build_cpu
=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
1411 build_vendor
=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
1412 build_os
=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
1415 echo "$as_me:$LINENO: checking host system type" >&5
1416 echo $ECHO_N "checking host system type... $ECHO_C" >&6
1417 if test "${ac_cv_host+set}" = set; then
1418 echo $ECHO_N "(cached) $ECHO_C" >&6
1420 ac_cv_host_alias
=$host_alias
1421 test -z "$ac_cv_host_alias" &&
1422 ac_cv_host_alias
=$ac_cv_build_alias
1423 ac_cv_host
=`$ac_config_sub $ac_cv_host_alias` ||
1424 { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
1425 echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
1426 { (exit 1); exit 1; }; }
1429 echo "$as_me:$LINENO: result: $ac_cv_host" >&5
1430 echo "${ECHO_T}$ac_cv_host" >&6
1432 host_cpu
=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
1433 host_vendor
=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
1434 host_os
=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
1437 echo "$as_me:$LINENO: checking target system type" >&5
1438 echo $ECHO_N "checking target system type... $ECHO_C" >&6
1439 if test "${ac_cv_target+set}" = set; then
1440 echo $ECHO_N "(cached) $ECHO_C" >&6
1442 ac_cv_target_alias
=$target_alias
1443 test "x$ac_cv_target_alias" = "x" &&
1444 ac_cv_target_alias
=$ac_cv_host_alias
1445 ac_cv_target
=`$ac_config_sub $ac_cv_target_alias` ||
1446 { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5
1447 echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;}
1448 { (exit 1); exit 1; }; }
1451 echo "$as_me:$LINENO: result: $ac_cv_target" >&5
1452 echo "${ECHO_T}$ac_cv_target" >&6
1453 target
=$ac_cv_target
1454 target_cpu
=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
1455 target_vendor
=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
1456 target_os
=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
1459 # The aliases save the names the user supplied, while $host etc.
1460 # will get canonicalized.
1461 test -n "$target_alias" &&
1462 test "$program_prefix$program_suffix$program_transform_name" = \
1464 program_prefix
=${target_alias}-
1466 # Autoconf M4 include file defining utility macros for complex Canadian
1475 # _NCN_TOOL_PREFIXES: Some stuff that oughtta be done in AC_CANONICAL_SYSTEM
1477 # These demand that AC_CANONICAL_SYSTEM be called beforehand.
1480 # NCN_CHECK_TARGET_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
1481 # Like AC_CHECK_TOOL, but tries a prefix of the target, not the host.
1482 # Code is pretty much lifted from autoconf2.53.
1487 # NCN_STRICT_CHECK_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
1488 # Like AC_CHECK_TOOL, but requires the prefix if build!=host.
1493 # NCN_STRICT_CHECK_TARGET_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
1494 # Like NCN_CHECK_TARGET_TOOL, but requires the prefix if build!=target.
1498 # AC_PROG_CPP_WERROR
1499 # Used for autoconf 2.5x to force AC_PREPROC_IFELSE to reject code which
1500 # triggers warnings from the preprocessor. Will be in autoconf 2.58.
1501 # For now, using this also overrides header checks to use only the
1502 # preprocessor (matches 2.13 behavior; matching 2.58's behavior is a
1503 # bit harder from here).
1504 # Eventually autoconf will default to checking headers with the compiler
1505 # instead, and we'll have to do this differently.
1507 # AC_PROG_CPP_WERROR
1510 # We require the gnatbind program, and a compiler driver that
1511 # understands Ada. We use the user's CC setting, already found.
1513 # Sets the shell variable have_gnat to yes or no as appropriate, and
1514 # substitutes GNATBIND.
1517 case ${build_alias} in
1518 "") build_noncanonical
=${build} ;;
1519 *) build_noncanonical
=${build_alias} ;;
1522 case ${host_alias} in
1523 "") host_noncanonical
=${build_noncanonical} ;;
1524 *) host_noncanonical
=${host_alias} ;;
1527 case ${target_alias} in
1528 "") target_noncanonical
=${host_noncanonical} ;;
1529 *) target_noncanonical
=${target_alias} ;;
1534 # Need to pass this down for now :-P
1535 echo "$as_me:$LINENO: checking whether ln -s works" >&5
1536 echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
1538 if test "$LN_S" = "ln -s"; then
1539 echo "$as_me:$LINENO: result: yes" >&5
1540 echo "${ECHO_T}yes" >&6
1542 echo "$as_me:$LINENO: result: no, using $LN_S" >&5
1543 echo "${ECHO_T}no, using $LN_S" >&6
1547 # Determine x_ada_cflags
1549 hppa
*) x_ada_cflags
=-mdisable-indexing ;;
1554 # Determine what to build for 'gnatlib'
1555 if test $build = $target \
1556 && test ${enable_shared} = yes ; then
1557 # Note that build=target is almost certainly the wrong test; FIXME
1558 default_gnatlib_target
="gnatlib-shared"
1560 default_gnatlib_target
="gnatlib-plain"
1564 # Output: create a Makefile.
1565 ac_config_files
="$ac_config_files Makefile"
1568 cat >confcache
<<\_ACEOF
1569 # This file is a shell script that caches the results of configure
1570 # tests run on this system so they can be shared between configure
1571 # scripts and configure runs, see configure's option --config-cache.
1572 # It is not useful on other systems. If it contains results you don't
1573 # want to keep, you may remove or edit it.
1575 # config.status only pays attention to the cache file if you give it
1576 # the --recheck option to rerun configure.
1578 # `ac_cv_env_foo' variables (set or unset) will be overridden when
1579 # loading this file, other *unset* `ac_cv_foo' will be assigned the
1584 # The following way of writing the cache mishandles newlines in values,
1585 # but we know of no workaround that is simple, portable, and efficient.
1586 # So, don't put newlines in cache variables' values.
1587 # Ultrix sh set writes to stderr and can't be redirected directly,
1588 # and sets the high bit in the cache file unless we assign to the vars.
1591 case `(ac_space=' '; set | grep ac_space) 2>&1` in
1593 # `set' does not quote correctly, so add quotes (double-quote
1594 # substitution turns \\\\ into \\, and sed turns \\ into \).
1597 s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
1600 # `set' quotes correctly as required by POSIX, so do not add quotes.
1602 "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
1609 s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
1611 /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
1613 if diff $cache_file confcache
>/dev
/null
2>&1; then :; else
1614 if test -w $cache_file; then
1615 test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
1616 cat confcache
>$cache_file
1618 echo "not updating unwritable cache $cache_file"
1623 test "x$prefix" = xNONE
&& prefix
=$ac_default_prefix
1624 # Let make expand exec_prefix.
1625 test "x$exec_prefix" = xNONE
&& exec_prefix
='${prefix}'
1627 # VPATH may cause trouble with some makes, so we remove $(srcdir),
1628 # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
1629 # trailing colons and then remove the whole line if VPATH becomes empty
1630 # (actually we leave an empty line to preserve line numbers).
1631 if test "x$srcdir" = x.
; then
1632 ac_vpsub
='/^[ ]*VPATH[ ]*=/{
1633 s/:*\$(srcdir):*/:/;
1634 s/:*\${srcdir}:*/:/;
1636 s/^\([^=]*=[ ]*\):*/\1/;
1642 # Transform confdefs.h into DEFS.
1643 # Protect against shell expansion while executing Makefile rules.
1644 # Protect against Makefile macro expansion.
1646 # If the first sed substitution is executed (which looks for macros that
1647 # take arguments), then we branch to the quote section. Otherwise,
1648 # look for a macro that doesn't take arguments.
1649 cat >confdef2opt.
sed <<\_ACEOF
1652 s
,^
[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
1654 s
,^
[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
1658 s
,[ `~#$^&*(){}\\|;'"<>?],\\&,g
1664 # We use echo to avoid assuming a particular line-breaking character.
1665 # The extra dot is to prevent the shell from consuming trailing
1666 # line-breaks from the sub-command output. A line-break within
1667 # single-quotes doesn't work because, if this script is created in a
1668 # platform that uses two characters for line-breaks (e.g., DOS), tr
1670 ac_LF_and_DOT=`echo; echo .
`
1671 DEFS=`sed -n -f confdef2opt.
sed confdefs.h |
tr "$ac_LF_and_DOT" ' .'`
1672 rm -f confdef2opt.sed
1677 for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
1678 # 1. Remove the extension, and $U if already installed.
1679 ac_i=`echo "$ac_i" |
1680 sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
1682 ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
1683 ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
1687 LTLIBOBJS=$ac_ltlibobjs
1691 : ${CONFIG_STATUS=./config.status}
1692 ac_clean_files_save=$ac_clean_files
1693 ac_clean_files="$ac_clean_files $CONFIG_STATUS"
1694 { echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
1695 echo "$as_me: creating $CONFIG_STATUS" >&6;}
1696 cat >$CONFIG_STATUS <<_ACEOF
1698 # Generated by $as_me.
1699 # Run this file to recreate the current configuration.
1700 # Compiler output produced by configure, useful for debugging
1701 # configure, is in config.log if it exists.
1706 SHELL=\${CONFIG_SHELL-$SHELL}
1709 cat >>$CONFIG_STATUS <<\_ACEOF
1710 ## --------------------- ##
1711 ## M4sh Initialization. ##
1712 ## --------------------- ##
1714 # Be Bourne compatible
1715 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
1718 # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
1719 # is contrary to our usage. Disable this feature.
1720 alias -g '${1+"$@"}'='"$@"'
1721 elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
1724 DUALCASE=1; export DUALCASE # for MKS sh
1726 # Support unset when possible.
1727 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
1734 # Work around bugs in pre-3.0 UWIN ksh.
1735 $as_unset ENV MAIL MAILPATH
1742 LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
1743 LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
1744 LC_TELEPHONE LC_TIME
1746 if (set +x; test -z "`(eval $as_var=C
; export $as_var) 2>&1`"); then
1747 eval $as_var=C; export $as_var
1753 # Required to use basename.
1754 if expr a : '\(a\)' >/dev/null 2>&1; then
1760 if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
1761 as_basename=basename
1767 # Name of the executable.
1768 as_me=`$as_basename "$0" ||
1769 $as_expr X
/"$0" : '.*/\([^/][^/]*\)/*$' \| \
1770 X
"$0" : 'X\(//\)$' \| \
1771 X
"$0" : 'X\(/\)$' \| \
1772 .
: '\(.\)' 2>/dev
/null ||
1774 sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
1775 /^X\/\(\/\/\)$/{ s//\1/; q; }
1776 /^X\/\(\/\).*/{ s//\1/; q; }
1780 # PATH needs CR, and LINENO needs CR and PATH.
1781 # Avoid depending upon Character Ranges.
1782 as_cr_letters='abcdefghijklmnopqrstuvwxyz'
1783 as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
1784 as_cr_Letters=$as_cr_letters$as_cr_LETTERS
1785 as_cr_digits='0123456789'
1786 as_cr_alnum=$as_cr_Letters$as_cr_digits
1788 # The user is always right.
1789 if test "${PATH_SEPARATOR+set}" != set; then
1790 echo "#! /bin/sh" >conf$$.sh
1791 echo "exit 0" >>conf$$.sh
1793 if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
1804 as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev
/null
`
1805 test "x$as_lineno_1" != "x$as_lineno_2" &&
1806 test "x$as_lineno_3" = "x$as_lineno_2" || {
1807 # Find who we are. Look in the path if we contain no path at all
1810 *[\\/]* ) as_myself=$0 ;;
1811 *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1815 test -z "$as_dir" && as_dir=.
1816 test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
1821 # We did not find ourselves, most probably we were run as `sh COMMAND
'
1822 # in which case we are not to be found in the path.
1823 if test "x$as_myself" = x; then
1826 if test ! -f "$as_myself"; then
1827 { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
1828 echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
1829 { (exit 1); exit 1; }; }
1831 case $CONFIG_SHELL in
1833 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1834 for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
1837 test -z "$as_dir" && as_dir=.
1838 for as_base in sh bash ksh sh5; do
1841 if ("$as_dir/$as_base" -c '
1844 as_lineno_3
=`(expr $as_lineno_1 + 1) 2>/dev/null`
1845 test "x$as_lineno_1" != "x$as_lineno_2" &&
1846 test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
1847 $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
1848 $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
1849 CONFIG_SHELL=$as_dir/$as_base
1851 exec "$CONFIG_SHELL" "$0" ${1+"$@"}
1859 # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
1860 # uniformly replaced by the line number. The first 'sed' inserts a
1861 # line-number line before each line; the second 'sed' does the real
1862 # work. The second script uses 'N
' to pair each line-number line
1863 # with the numbered line, and appends trailing '-' during
1864 # substitution so that $LINENO is not a special case at line end.
1865 # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
1866 # second 'sed' script. Blame Lee E. McMahon for sed's syntax.
:-)
1867 sed '=' <$as_myself |
1872 s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
1875 s,^['$as_cr_digits']*\n,,
1877 chmod +x
$as_me.lineno ||
1878 { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
1879 echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
1880 { (exit 1); exit 1; }; }
1882 # Don't try to exec as it changes $[0], causing all sort of problems
1883 # (the dirname of $[0] is not the place where we might find the
1884 # original and so on. Autoconf is especially sensible to this).
1886 # Exit status is that of the last command.
1891 case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
1892 *c
*,-n*) ECHO_N
= ECHO_C
='
1894 *c
*,* ) ECHO_N
=-n ECHO_C
= ECHO_T
= ;;
1895 *) ECHO_N
= ECHO_C
='\c' ECHO_T
= ;;
1898 if expr a
: '\(a\)' >/dev
/null
2>&1; then
1904 rm -f conf$$ conf$$.exe conf$$.
file
1906 if ln -s conf$$.
file conf$$
2>/dev
/null
; then
1907 # We could just check for DJGPP; but this test a) works b) is more generic
1908 # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
1909 if test -f conf$$.exe
; then
1910 # Don't use ln at all; we don't have any links
1915 elif ln conf$$.
file conf$$
2>/dev
/null
; then
1920 rm -f conf$$ conf$$.exe conf$$.
file
1922 if mkdir
-p .
2>/dev
/null
; then
1925 test -d .
/-p && rmdir .
/-p
1929 as_executable_p
="test -f"
1931 # Sed expression to map a string onto a valid CPP name.
1932 as_tr_cpp
="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
1934 # Sed expression to map a string onto a valid variable name.
1935 as_tr_sh
="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
1939 # We need space, tab and new line, in precisely that order.
1949 # Open the log real soon, to keep \$[0] and so on meaningful, and to
1950 # report actual input values of CONFIG_FILES etc. instead of their
1951 # values after options handling. Logging --version etc. is OK.
1955 sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
1956 ## Running $as_me. ##
1961 This file was extended by $as_me, which was
1962 generated by GNU Autoconf 2.59. Invocation command line was
1964 CONFIG_FILES = $CONFIG_FILES
1965 CONFIG_HEADERS = $CONFIG_HEADERS
1966 CONFIG_LINKS = $CONFIG_LINKS
1967 CONFIG_COMMANDS = $CONFIG_COMMANDS
1971 echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
1975 # Files that config.status was made for.
1976 if test -n "$ac_config_files"; then
1977 echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
1980 if test -n "$ac_config_headers"; then
1981 echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
1984 if test -n "$ac_config_links"; then
1985 echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
1988 if test -n "$ac_config_commands"; then
1989 echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
1992 cat >>$CONFIG_STATUS <<\_ACEOF
1995 \`$as_me' instantiates files from templates according to the
1996 current configuration.
1998 Usage: $0 [OPTIONS] [FILE]...
2000 -h, --help print this help, then exit
2001 -V, --version print version number, then exit
2002 -q, --quiet do not print progress messages
2003 -d, --debug don't remove temporary files
2004 --recheck update $as_me by reconfiguring in the same conditions
2005 --file=FILE[:TEMPLATE]
2006 instantiate the configuration file FILE
2008 Configuration files:
2011 Report bugs to <bug-autoconf@gnu.org>."
2014 cat >>$CONFIG_STATUS <<_ACEOF
2017 configured by $0, generated by GNU Autoconf 2.59,
2018 with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
2020 Copyright (C) 2003 Free Software Foundation, Inc.
2021 This config.status script is free software; the Free Software Foundation
2022 gives unlimited permission to copy, distribute and modify it."
2027 cat >>$CONFIG_STATUS <<\_ACEOF
2028 # If no file are specified by the user, then we need to provide default
2029 # value. By we need to know if files were specified by the user.
2035 ac_option
=`expr "x$1" : 'x\([^=]*\)='`
2036 ac_optarg
=`expr "x$1" : 'x[^=]*=\(.*\)'`
2044 *) # This is not an option, so the user has probably given explicit
2047 ac_need_defaults
=false
;;
2051 # Handling of the options.
2053 cat >>$CONFIG_STATUS <<\_ACEOF
2054 -recheck |
--recheck |
--rechec |
--reche |
--rech |
--rec |
--re |
--r)
2056 --version |
--vers* |
-V )
2057 echo "$ac_cs_version"; exit 0 ;;
2059 # Conflict between --help and --header
2060 { { echo "$as_me:$LINENO: error: ambiguous option: $1
2061 Try \`$0 --help' for more information." >&5
2062 echo "$as_me: error: ambiguous option: $1
2063 Try \`$0 --help' for more information." >&2;}
2064 { (exit 1); exit 1; }; };;
2065 --help |
--hel |
-h )
2066 echo "$ac_cs_usage"; exit 0 ;;
2067 --debug |
--d* |
-d )
2069 --file |
--fil |
--fi |
--f )
2071 CONFIG_FILES
="$CONFIG_FILES $ac_optarg"
2072 ac_need_defaults
=false
;;
2073 --header |
--heade |
--head |
--hea )
2075 CONFIG_HEADERS
="$CONFIG_HEADERS $ac_optarg"
2076 ac_need_defaults
=false
;;
2077 -q |
-quiet |
--quiet |
--quie |
--qui |
--qu |
--q \
2078 |
-silent |
--silent |
--silen |
--sile |
--sil |
--si |
--s)
2082 -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
2083 Try \`$0 --help' for more information." >&5
2084 echo "$as_me: error: unrecognized option: $1
2085 Try \`$0 --help' for more information." >&2;}
2086 { (exit 1); exit 1; }; } ;;
2088 *) ac_config_targets
="$ac_config_targets $1" ;;
2094 ac_configure_extra_args
=
2096 if $ac_cs_silent; then
2098 ac_configure_extra_args
="$ac_configure_extra_args --silent"
2102 cat >>$CONFIG_STATUS <<_ACEOF
2103 if \$ac_cs_recheck; then
2104 echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
2105 exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
2114 cat >>$CONFIG_STATUS <<\_ACEOF
2115 for ac_config_target
in $ac_config_targets
2117 case "$ac_config_target" in
2118 # Handling of arguments.
2119 "Makefile" ) CONFIG_FILES
="$CONFIG_FILES Makefile" ;;
2120 *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
2121 echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
2122 { (exit 1); exit 1; }; };;
2126 # If the user did not use the arguments to specify the items to instantiate,
2127 # then the envvar interface is used. Set only those that are not.
2128 # We use the long form for the default assignment because of an extremely
2129 # bizarre bug on SunOS 4.1.3.
2130 if $ac_need_defaults; then
2131 test "${CONFIG_FILES+set}" = set || CONFIG_FILES
=$config_files
2134 # Have a temporary directory for convenience. Make it in the build tree
2135 # simply because there is no reason to put it here, and in addition,
2136 # creating and moving files from /tmp can sometimes cause problems.
2137 # Create a temporary directory, and hook for its removal unless debugging.
2140 trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
2141 trap '{ (exit 1); exit 1; }' 1 2 13 15
2144 # Create a (secure) tmp directory for tmp files.
2147 tmp
=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
2148 test -n "$tmp" && test -d "$tmp"
2151 tmp
=.
/confstat$$
-$RANDOM
2152 (umask 077 && mkdir
$tmp)
2155 echo "$me: cannot create a temporary directory in ." >&2
2156 { (exit 1); exit 1; }
2161 cat >>$CONFIG_STATUS <<_ACEOF
2164 # CONFIG_FILES section.
2167 # No need to generate the scripts if there are no CONFIG_FILES.
2168 # This happens for instance when ./config.status config.h
2169 if test -n "\$CONFIG_FILES"; then
2170 # Protect against being on the right side of a sed subst in config.status.
2171 sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
2172 s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
2173 s,@SHELL@,$SHELL,;t t
2174 s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
2175 s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
2176 s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
2177 s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
2178 s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
2179 s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
2180 s,@exec_prefix@,$exec_prefix,;t t
2181 s,@prefix@,$prefix,;t t
2182 s,@program_transform_name@,$program_transform_name,;t t
2183 s,@bindir@,$bindir,;t t
2184 s,@sbindir@,$sbindir,;t t
2185 s,@libexecdir@,$libexecdir,;t t
2186 s,@datadir@,$datadir,;t t
2187 s,@sysconfdir@,$sysconfdir,;t t
2188 s,@sharedstatedir@,$sharedstatedir,;t t
2189 s,@localstatedir@,$localstatedir,;t t
2190 s,@libdir@,$libdir,;t t
2191 s,@includedir@,$includedir,;t t
2192 s,@oldincludedir@,$oldincludedir,;t t
2193 s,@infodir@,$infodir,;t t
2194 s,@mandir@,$mandir,;t t
2195 s,@build_alias@,$build_alias,;t t
2196 s,@host_alias@,$host_alias,;t t
2197 s,@target_alias@,$target_alias,;t t
2199 s,@ECHO_C@,$ECHO_C,;t t
2200 s,@ECHO_N@,$ECHO_N,;t t
2201 s,@ECHO_T@,$ECHO_T,;t t
2203 s,@MAINT@,$MAINT,;t t
2204 s,@enable_shared@,$enable_shared,;t t
2205 s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
2206 s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
2207 s,@INSTALL_DATA@,$INSTALL_DATA,;t t
2208 s,@build@,$build,;t t
2209 s,@build_cpu@,$build_cpu,;t t
2210 s,@build_vendor@,$build_vendor,;t t
2211 s,@build_os@,$build_os,;t t
2213 s,@host_cpu@,$host_cpu,;t t
2214 s,@host_vendor@,$host_vendor,;t t
2215 s,@host_os@,$host_os,;t t
2216 s,@target@,$target,;t t
2217 s,@target_cpu@,$target_cpu,;t t
2218 s,@target_vendor@,$target_vendor,;t t
2219 s,@target_os@,$target_os,;t t
2220 s,@target_noncanonical@,$target_noncanonical,;t t
2222 s,@x_ada_cflags@,$x_ada_cflags,;t t
2223 s,@default_gnatlib_target@,$default_gnatlib_target,;t t
2224 s,@LIBOBJS@,$LIBOBJS,;t t
2225 s,@LTLIBOBJS@,$LTLIBOBJS,;t t
2230 cat >>$CONFIG_STATUS <<\_ACEOF
2231 # Split the substitutions into bite-sized pieces for seds with
2232 # small command number limits, like on Digital OSF/1 and HP-UX.
2234 ac_sed_frag
=1 # Number of current file.
2235 ac_beg
=1 # First line for current file.
2236 ac_end
=$ac_max_sed_lines # Line after last line for current file.
2239 while $ac_more_lines; do
2240 if test $ac_beg -gt 1; then
2241 sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.
sed >$tmp/subs.frag
2243 sed "${ac_end}q" $tmp/subs.
sed >$tmp/subs.frag
2245 if test ! -s $tmp/subs.frag
; then
2248 # The purpose of the label and of the branching condition is to
2249 # speed up the sed processing (if there are no `@' at all, there
2250 # is no need to browse any of the substitutions).
2251 # These are the two extra sed commands mentioned above.
2253 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag
) >$tmp/subs-
$ac_sed_frag.
sed
2254 if test -z "$ac_sed_cmds"; then
2255 ac_sed_cmds
="sed -f $tmp/subs-$ac_sed_frag.sed"
2257 ac_sed_cmds
="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
2259 ac_sed_frag
=`expr $ac_sed_frag + 1`
2261 ac_end
=`expr $ac_end + $ac_max_sed_lines`
2264 if test -z "$ac_sed_cmds"; then
2267 fi # test -n "$CONFIG_FILES"
2270 cat >>$CONFIG_STATUS <<\_ACEOF
2271 for ac_file
in : $CONFIG_FILES; do test "x$ac_file" = x
: && continue
2272 # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
2274 - |
*:- |
*:-:* ) # input from stdin
2276 ac_file_in
=`echo "$ac_file" | sed 's,[^:]*:,,'`
2277 ac_file
=`echo "$ac_file" | sed 's,:.*,,'` ;;
2278 *:* ) ac_file_in
=`echo "$ac_file" | sed 's,[^:]*:,,'`
2279 ac_file
=`echo "$ac_file" | sed 's,:.*,,'` ;;
2280 * ) ac_file_in
=$ac_file.
in ;;
2283 # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
2284 ac_dir
=`(dirname "$ac_file") 2>/dev/null ||
2285 $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
2286 X"$ac_file" : 'X\(//\)[^/]' \| \
2287 X"$ac_file" : 'X\(//\)$' \| \
2288 X"$ac_file" : 'X\(/\)' \| \
2289 . : '\(.\)' 2>/dev/null ||
2291 sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
2292 /^X\(\/\/\)[^/].*/{ s//\1/; q; }
2293 /^X\(\/\/\)$/{ s//\1/; q; }
2294 /^X\(\/\).*/{ s//\1/; q; }
2296 { if $as_mkdir_p; then
2301 while test ! -d "$as_dir"; do
2302 as_dirs
="$as_dir $as_dirs"
2303 as_dir
=`(dirname "$as_dir") 2>/dev/null ||
2304 $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
2305 X"$as_dir" : 'X\(//\)[^/]' \| \
2306 X"$as_dir" : 'X\(//\)$' \| \
2307 X"$as_dir" : 'X\(/\)' \| \
2308 . : '\(.\)' 2>/dev/null ||
2310 sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
2311 /^X\(\/\/\)[^/].*/{ s//\1/; q; }
2312 /^X\(\/\/\)$/{ s//\1/; q; }
2313 /^X\(\/\).*/{ s//\1/; q; }
2316 test ! -n "$as_dirs" || mkdir
$as_dirs
2317 fi ||
{ { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
2318 echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
2319 { (exit 1); exit 1; }; }; }
2323 if test "$ac_dir" != .
; then
2324 ac_dir_suffix
=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
2325 # A "../" for each directory in $ac_dir_suffix.
2326 ac_top_builddir
=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
2328 ac_dir_suffix
= ac_top_builddir
=
2332 .
) # No --srcdir option. We are building in place.
2334 if test -z "$ac_top_builddir"; then
2337 ac_top_srcdir
=`echo $ac_top_builddir | sed 's,/$,,'`
2339 [\\/]* | ?
:[\\/]* ) # Absolute path.
2340 ac_srcdir
=$srcdir$ac_dir_suffix;
2341 ac_top_srcdir
=$srcdir ;;
2343 ac_srcdir
=$ac_top_builddir$srcdir$ac_dir_suffix
2344 ac_top_srcdir
=$ac_top_builddir$srcdir ;;
2347 # Do not use `cd foo && pwd` to compute absolute paths, because
2348 # the directories may not exist.
2350 .
) ac_abs_builddir
="$ac_dir";;
2353 .
) ac_abs_builddir
=`pwd`;;
2354 [\\/]* | ?
:[\\/]* ) ac_abs_builddir
="$ac_dir";;
2355 *) ac_abs_builddir
=`pwd`/"$ac_dir";;
2358 case $ac_abs_builddir in
2359 .
) ac_abs_top_builddir
=${ac_top_builddir}.
;;
2361 case ${ac_top_builddir}.
in
2362 .
) ac_abs_top_builddir
=$ac_abs_builddir;;
2363 [\\/]* | ?
:[\\/]* ) ac_abs_top_builddir
=${ac_top_builddir}.
;;
2364 *) ac_abs_top_builddir
=$ac_abs_builddir/${ac_top_builddir}.
;;
2367 case $ac_abs_builddir in
2368 .
) ac_abs_srcdir
=$ac_srcdir;;
2371 .
) ac_abs_srcdir
=$ac_abs_builddir;;
2372 [\\/]* | ?
:[\\/]* ) ac_abs_srcdir
=$ac_srcdir;;
2373 *) ac_abs_srcdir
=$ac_abs_builddir/$ac_srcdir;;
2376 case $ac_abs_builddir in
2377 .
) ac_abs_top_srcdir
=$ac_top_srcdir;;
2379 case $ac_top_srcdir in
2380 .
) ac_abs_top_srcdir
=$ac_abs_builddir;;
2381 [\\/]* | ?
:[\\/]* ) ac_abs_top_srcdir
=$ac_top_srcdir;;
2382 *) ac_abs_top_srcdir
=$ac_abs_builddir/$ac_top_srcdir;;
2388 [\\/$
]* | ?
:[\\/]* ) ac_INSTALL
=$INSTALL ;;
2389 *) ac_INSTALL
=$ac_top_builddir$INSTALL ;;
2392 # Let's still pretend it is `configure' which instantiates (i.e., don't
2393 # use $as_me), people would be surprised to read:
2394 # /* config.h. Generated by config.status. */
2395 if test x
"$ac_file" = x-
; then
2398 configure_input
="$ac_file. "
2400 configure_input
=$configure_input"Generated from `echo $ac_file_in |
2401 sed 's,.*/,,'` by configure."
2403 # First look for the input files in the build tree, otherwise in the
2405 ac_file_inputs
=`IFS=:
2406 for f in $ac_file_in; do
2408 -) echo $tmp/stdin ;;
2410 # Absolute (can't be DOS-style, as IFS=:)
2411 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
2412 echo "$as_me: error: cannot find input file: $f" >&2;}
2413 { (exit 1); exit 1; }; }
2416 if test -f "$f"; then
2419 elif test -f "$srcdir/$f"; then
2424 { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
2425 echo "$as_me: error: cannot find input file: $f" >&2;}
2426 { (exit 1); exit 1; }; }
2429 done` ||
{ (exit 1); exit 1; }
2431 if test x
"$ac_file" != x-
; then
2432 { echo "$as_me:$LINENO: creating $ac_file" >&5
2433 echo "$as_me: creating $ac_file" >&6;}
2437 cat >>$CONFIG_STATUS <<_ACEOF
2441 cat >>$CONFIG_STATUS <<\_ACEOF
2443 /@
[a-zA-Z_
][a-zA-Z_0-9
]*@
/!b
2444 s
,@configure_input@
,$configure_input,;t t
2445 s
,@srcdir@
,$ac_srcdir,;t t
2446 s
,@abs_srcdir@
,$ac_abs_srcdir,;t t
2447 s
,@top_srcdir@
,$ac_top_srcdir,;t t
2448 s
,@abs_top_srcdir@
,$ac_abs_top_srcdir,;t t
2449 s
,@builddir@
,$ac_builddir,;t t
2450 s
,@abs_builddir@
,$ac_abs_builddir,;t t
2451 s
,@top_builddir@
,$ac_top_builddir,;t t
2452 s
,@abs_top_builddir@
,$ac_abs_top_builddir,;t t
2453 s
,@INSTALL@
,$ac_INSTALL,;t t
2454 " $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
2456 if test x"$ac_file" != x-; then
2457 mv $tmp/out $ac_file
2466 cat >>$CONFIG_STATUS <<\_ACEOF
2468 { (exit 0); exit 0; }
2470 chmod +x $CONFIG_STATUS
2471 ac_clean_files=$ac_clean_files_save
2474 # configure is writing to config.log, and then calls config.status.
2475 # config.status does its own redirection, appending to config.log.
2476 # Unfortunately, on DOS this fails, as config.log is still kept open
2477 # by configure, so config.status won't be able to write to it; its
2478 # output is simply discarded. So we exec the FD to /dev/null,
2479 # effectively closing config.log, so it can be properly (re)opened and
2480 # appended to by config.status. When coming back to configure, we
2481 # need to make the FD available again.
2482 if test "$no_create" != yes; then
2484 ac_config_status_args=
2485 test "$silent" = yes &&
2486 ac_config_status_args="$ac_config_status_args --quiet"
2488 $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
2490 # Use ||, not &&, to avoid exiting from the if with $? = 1, which
2491 # would make configure fail if this is the last instruction.
2492 $ac_cs_success || { (exit 1); exit 1; }