1 <?xml version='
1.0'
?> <!--*-nxml-*-->
2 <!DOCTYPE refentry PUBLIC
"-//OASIS//DTD DocBook XML V4.5//EN"
3 "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd">
4 <!-- SPDX-License-Identifier: LGPL-2.1-or-later -->
6 <refentry id=
"systemd-analyze" conditional='ENABLE_ANALYZE'
7 xmlns:
xi=
"http://www.w3.org/2001/XInclude">
10 <title>systemd-analyze
</title>
11 <productname>systemd
</productname>
15 <refentrytitle>systemd-analyze
</refentrytitle>
16 <manvolnum>1</manvolnum>
20 <refname>systemd-analyze
</refname>
21 <refpurpose>Analyze and debug system manager
</refpurpose>
26 <command>systemd-analyze
</command>
27 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
31 <command>systemd-analyze
</command>
32 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
33 <arg choice=
"plain">blame
</arg>
36 <command>systemd-analyze
</command>
37 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
38 <arg choice=
"plain">critical-chain
</arg>
39 <arg choice=
"opt" rep=
"repeat"><replaceable>UNIT
</replaceable></arg>
43 <command>systemd-analyze
</command>
44 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
45 <arg choice=
"plain">dump
</arg>
46 <arg choice=
"opt" rep=
"repeat"><replaceable>PATTERN
</replaceable></arg>
50 <command>systemd-analyze
</command>
51 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
52 <arg choice=
"plain">plot
</arg>
53 <arg choice=
"opt">>file.svg
</arg>
56 <command>systemd-analyze
</command>
57 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
58 <arg choice=
"plain">dot
</arg>
59 <arg choice=
"opt" rep=
"repeat"><replaceable>PATTERN
</replaceable></arg>
60 <arg choice=
"opt">>file.dot
</arg>
64 <command>systemd-analyze
</command>
65 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
66 <arg choice=
"plain">unit-files
</arg>
69 <command>systemd-analyze
</command>
70 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
71 <arg choice=
"plain">unit-paths
</arg>
74 <command>systemd-analyze
</command>
75 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
76 <arg choice=
"plain">exit-status
</arg>
77 <arg choice=
"opt" rep=
"repeat"><replaceable>STATUS
</replaceable></arg>
80 <command>systemd-analyze
</command>
81 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
82 <arg choice=
"plain">capability
</arg>
83 <arg choice=
"opt" rep=
"repeat"><replaceable>CAPABILITY
</replaceable></arg>
86 <command>systemd-analyze
</command>
87 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
88 <arg choice=
"plain">condition
</arg>
89 <arg choice=
"plain"><replaceable>CONDITION
</replaceable>…
</arg>
92 <command>systemd-analyze
</command>
93 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
94 <arg choice=
"plain">syscall-filter
</arg>
95 <arg choice=
"opt"><replaceable>SET
</replaceable>…
</arg>
98 <command>systemd-analyze
</command>
99 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
100 <arg choice=
"plain">filesystems
</arg>
101 <arg choice=
"opt"><replaceable>SET
</replaceable>…
</arg>
104 <command>systemd-analyze
</command>
105 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
106 <arg choice=
"plain">calendar
</arg>
107 <arg choice=
"plain" rep=
"repeat"><replaceable>SPEC
</replaceable></arg>
110 <command>systemd-analyze
</command>
111 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
112 <arg choice=
"plain">timestamp
</arg>
113 <arg choice=
"plain" rep=
"repeat"><replaceable>TIMESTAMP
</replaceable></arg>
116 <command>systemd-analyze
</command>
117 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
118 <arg choice=
"plain">timespan
</arg>
119 <arg choice=
"plain" rep=
"repeat"><replaceable>SPAN
</replaceable></arg>
122 <command>systemd-analyze
</command>
123 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
124 <arg choice=
"plain">cat-config
</arg>
125 <arg choice=
"plain" rep=
"repeat"><replaceable>NAME
</replaceable>|
<replaceable>PATH
</replaceable></arg>
128 <command>systemd-analyze
</command>
129 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
130 <arg choice=
"plain">compare-versions
</arg>
131 <arg choice=
"plain"><replaceable>VERSION1
</replaceable></arg>
132 <arg choice=
"opt"><replaceable>OP
</replaceable></arg>
133 <arg choice=
"plain"><replaceable>VERSION2
</replaceable></arg>
136 <command>systemd-analyze
</command>
137 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
138 <arg choice=
"plain">verify
</arg>
139 <arg choice=
"plain" rep=
"repeat"><replaceable>FILE
</replaceable></arg>
142 <command>systemd-analyze
</command>
143 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
144 <arg choice=
"plain">security
</arg>
145 <arg choice=
"opt" rep=
"repeat"><replaceable>UNIT
</replaceable></arg>
148 <command>systemd-analyze
</command>
149 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
150 <arg choice=
"plain">inspect-elf
</arg>
151 <arg choice=
"plain" rep=
"repeat"><replaceable>FILE
</replaceable></arg>
154 <command>systemd-analyze
</command>
155 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
156 <arg choice=
"plain">malloc
</arg>
157 <arg choice=
"opt" rep=
"repeat"><replaceable>D-BUS SERVICE
</replaceable></arg>
160 <command>systemd-analyze
</command>
161 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
162 <arg choice=
"plain">fdstore
</arg>
163 <arg choice=
"plain" rep=
"repeat"><replaceable>UNIT
</replaceable></arg>
166 <command>systemd-analyze
</command>
167 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
168 <arg choice=
"plain">image-policy
</arg>
169 <arg choice=
"plain" rep=
"repeat"><replaceable>POLICY
</replaceable></arg>
172 <command>systemd-analyze
</command>
173 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
174 <arg choice=
"plain">pcrs
</arg>
175 <arg choice=
"opt" rep=
"repeat"><replaceable>PCR
</replaceable></arg>
178 <command>systemd-analyze
</command>
179 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
180 <arg choice=
"plain">srk
</arg>
181 <arg choice=
"opt"><replaceable>>FILE
</replaceable></arg>
184 <command>systemd-analyze
</command>
185 <arg choice=
"opt" rep=
"repeat">OPTIONS
</arg>
186 <arg choice=
"plain">architectures
</arg>
187 <arg choice=
"opt" rep=
"repeat"><replaceable>NAME
</replaceable></arg>
192 <title>Description
</title>
194 <para><command>systemd-analyze
</command> may be used to determine
195 system boot-up performance statistics and retrieve other state and
196 tracing information from the system and service manager, and to
197 verify the correctness of unit files. It is also used to access
198 special functions useful for advanced system manager debugging.
</para>
200 <para>If no command is passed,
<command>systemd-analyze
201 time
</command> is implied.
</para>
204 <title><command>systemd-analyze time
</command></title>
206 <para>This command prints the time spent in the kernel before userspace has been reached, the time
207 spent in the initrd before normal system userspace has been reached, and the time normal system
208 userspace took to initialize. Note that these measurements simply measure the time passed up to the
209 point where all system services have been spawned, but not necessarily until they fully finished
210 initialization or the disk is idle.
</para>
213 <title><command>Show how long the boot took
</command></title>
215 <programlisting># in a container
216 $ systemd-analyze time
217 Startup finished in
296ms (userspace)
218 multi-user.target reached after
275ms in userspace
221 $ systemd-analyze time
222 Startup finished in
2.584s (kernel) +
19.176s (initrd) +
47.847s (userspace) =
1min
9.608s
223 multi-user.target reached after
47.820s in userspace
229 <title><command>systemd-analyze blame
</command></title>
231 <para>This command prints a list of all running units, ordered by the time they took to initialize.
232 This information may be used to optimize boot-up times. Note that the output might be misleading as the
233 initialization of one service might be slow simply because it waits for the initialization of another
234 service to complete. Also note:
<command>systemd-analyze blame
</command> doesn't display results for
235 services with
<varname>Type=simple
</varname>, because systemd considers such services to be started
236 immediately, hence no measurement of the initialization delays can be done. Also note that this command
237 only shows the time units took for starting up, it does not show how long unit jobs spent in the
238 execution queue. In particular it shows the time units spent in
<literal>activating
</literal> state,
239 which is not defined for units such as device units that transition directly from
240 <literal>inactive
</literal> to
<literal>active
</literal>. This command hence gives an impression of the
241 performance of program code, but cannot accurately reflect latency introduced by waiting for
242 hardware and similar events.
</para>
245 <title><command>Show which units took the most time during boot
</command></title>
247 <programlisting>$ systemd-analyze blame
248 32.875s pmlogger.service
249 20.905s systemd-networkd-wait-online.service
250 13.299s dev-vda1.device
253 11ms initrd-udevadm-cleanup-db.service
254 3ms sys-kernel-config.mount
260 <title><command>systemd-analyze critical-chain
<optional><replaceable>UNIT
</replaceable>...
</optional></command></title>
262 <para>This command prints a tree of the time-critical chain of units (for each of the specified
263 <replaceable>UNIT
</replaceable>s or for the default target otherwise). The time after the unit is
264 active or started is printed after the
"@" character. The time the unit takes to start is printed after
265 the
"+" character. Note that the output might be misleading as the initialization of services might
266 depend on socket activation and because of the parallel execution of units. Also, similarly to the
267 <command>blame
</command> command, this only takes into account the time units spent in
268 <literal>activating
</literal> state, and hence does not cover units that never went through an
269 <literal>activating
</literal> state (such as device units that transition directly from
270 <literal>inactive
</literal> to
<literal>active
</literal>). Moreover it does not show information on
271 jobs (and in particular not jobs that timed out).
</para>
274 <title><command>systemd-analyze critical-chain
</command></title>
276 <programlisting>$ systemd-analyze critical-chain
277 multi-user.target @
47.820s
278 └─pmie.service @
35.968s +
548ms
279 └─pmcd.service @
33.715s +
2.247s
280 └─network-online.target @
33.712s
281 └─systemd-networkd-wait-online.service @
12.804s +
20.905s
282 └─systemd-networkd.service @
11.109s +
1.690s
283 └─systemd-udevd.service @
9.201s +
1.904s
284 └─systemd-tmpfiles-setup-dev.service @
7.306s +
1.776s
285 └─kmod-static-nodes.service @
6.976s +
177ms
286 └─systemd-journald.socket
294 <title><command>systemd-analyze dump [
<replaceable>pattern
</replaceable>…]
</command></title>
296 <para>Without any parameter, this command outputs a (usually very long) human-readable serialization of
297 the complete service manager state. Optional glob pattern may be specified, causing the output to be
298 limited to units whose names match one of the patterns. The output format is subject to change without
299 notice and should not be parsed by applications. This command is rate limited for unprivileged users.
</para>
302 <title>Show the internal state of user manager
</title>
304 <programlisting>$ systemd-analyze --user dump
305 Timestamp userspace: Thu
2019-
03-
14 23:
28:
07 CET
306 Timestamp finish: Thu
2019-
03-
14 23:
28:
07 CET
307 Timestamp generators-start: Thu
2019-
03-
14 23:
28:
07 CET
308 Timestamp generators-finish: Thu
2019-
03-
14 23:
28:
07 CET
309 Timestamp units-load-start: Thu
2019-
03-
14 23:
28:
07 CET
310 Timestamp units-load-finish: Thu
2019-
03-
14 23:
28:
07 CET
311 -
> Unit proc-timer_list.mount:
312 Description: /proc/timer_list
314 -
> Unit default.target:
315 Description: Main user target
322 <title><command>systemd-analyze malloc [
<replaceable>D-Bus service
</replaceable>…]
</command></title>
324 <para>This command can be used to request the output of the internal memory state (as returned by
325 <citerefentry project='man-pages'
><refentrytitle>malloc_info
</refentrytitle><manvolnum>3</manvolnum></citerefentry>)
326 of a D-Bus service. If no service is specified, the query will be sent to
327 <filename>org.freedesktop.systemd1
</filename> (the system or user service manager). The output format
328 is not guaranteed to be stable and should not be parsed by applications.
</para>
330 <para>The service must implement the
<filename>org.freedesktop.MemoryAllocation1
</filename> interface.
331 In the systemd suite, it is currently only implemented by the manager.
</para>
335 <title><command>systemd-analyze plot
</command></title>
337 <para>This command prints either an SVG graphic, detailing which system services have been started at what
338 time, highlighting the time they spent on initialization, or the raw time data in JSON or table format.
</para>
341 <title><command>Plot a bootchart
</command></title>
343 <programlisting>$ systemd-analyze plot
>bootup.svg
344 $ eog bootup.svg
&
348 <para>Note that this plot is based on the most recent per-unit timing data of loaded units. This means
349 that if a unit gets started, then stopped and then started again the information shown will cover the
350 most recent start cycle, not the first one. Thus it's recommended to consult this information only
351 shortly after boot, so that this distinction doesn't matter. Moreover, units that are not referenced by
352 any other unit through a dependency might be unloaded by the service manager once they terminate (and
353 did not fail). Such units will not show up in the plot.
</para>
357 <title><command>systemd-analyze dot [
<replaceable>pattern
</replaceable>...]
</command></title>
359 <para>This command generates textual dependency graph description in dot format for further processing
361 <citerefentry project='die-net'
><refentrytitle>dot
</refentrytitle><manvolnum>1</manvolnum></citerefentry>
362 tool. Use a command line like
<command>systemd-analyze dot | dot -Tsvg
>systemd.svg
</command> to
363 generate a graphical dependency tree. Unless
<option>--order
</option> or
<option>--require
</option> is
364 passed, the generated graph will show both ordering and requirement dependencies. Optional pattern
365 globbing style specifications (e.g.
<filename>*.target
</filename>) may be given at the end. A unit
366 dependency is included in the graph if any of these patterns match either the origin or destination
370 <title>Plot all dependencies of any unit whose name starts with
<literal>avahi-daemon
</literal>
373 <programlisting>$ systemd-analyze dot 'avahi-daemon.*' | dot -Tsvg
>avahi.svg
374 $ eog avahi.svg
</programlisting>
378 <title>Plot the dependencies between all known target units
</title>
380 <programlisting>$ systemd-analyze dot --to-pattern='*.target' --from-pattern='*.target' \
381 | dot -Tsvg
>targets.svg
382 $ eog targets.svg
</programlisting>
387 <title><command>systemd-analyze unit-paths
</command></title>
389 <para>This command outputs a list of all directories from which unit files,
<filename>.d
</filename>
390 overrides, and
<filename>.wants
</filename>,
<filename>.requires
</filename> symlinks may be
391 loaded. Combine with
<option>--user
</option> to retrieve the list for the user manager instance, and
392 <option>--global
</option> for the global configuration of user manager instances.
</para>
395 <title><command>Show all paths for generated units
</command></title>
397 <programlisting>$ systemd-analyze unit-paths | grep '^/run'
398 /run/systemd/system.control
399 /run/systemd/transient
400 /run/systemd/generator.early
402 /run/systemd/system.attached
403 /run/systemd/generator
404 /run/systemd/generator.late
408 <para>Note that this verb prints the list that is compiled into
<command>systemd-analyze
</command>
409 itself, and does not communicate with the running manager. Use
410 <programlisting>systemctl [--user] [--global] show -p UnitPath --value
</programlisting>
411 to retrieve the actual list that the manager uses, with any empty directories omitted.
</para>
415 <title><command>systemd-analyze exit-status
<optional><replaceable>STATUS
</replaceable>...
</optional></command></title>
417 <para>This command prints a list of exit statuses along with their
"class", i.e. the source of the
418 definition (one of
<literal>glibc
</literal>,
<literal>systemd
</literal>,
<literal>LSB
</literal>, or
419 <literal>BSD
</literal>), see the Process Exit Codes section in
420 <citerefentry><refentrytitle>systemd.exec
</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
421 If no additional arguments are specified, all known statuses are shown. Otherwise, only the
422 definitions for the specified codes are shown.
</para>
425 <title><command>Show some example exit status names
</command></title>
427 <programlisting>$ systemd-analyze exit-status
0 1 {
63.
.65}
439 <title><command>systemd-analyze capability
<optional><replaceable>CAPABILITY
</replaceable>...
</optional></command></title>
441 <para>This command prints a list of Linux capabilities along with their numeric IDs. See
<citerefentry
442 project='man-pages'
><refentrytitle>capabilities
</refentrytitle><manvolnum>7</manvolnum></citerefentry>
443 for details. If no argument is specified the full list of capabilities known to the service manager and
444 the kernel is shown. Capabilities defined by the kernel but not known to the service manager are shown
445 as
<literal>cap_???
</literal>. Optionally, if arguments are specified they may refer to specific
446 cabilities by name or numeric ID, in which case only the indicated capabilities are shown in the
450 <title><command>Show some example capability names
</command></title>
452 <programlisting>$ systemd-analyze capability
0 1 {
30.
.32}
458 cap_mac_override
32</programlisting>
463 <title><command>systemd-analyze condition
<replaceable>CONDITION
</replaceable>...
</command></title>
465 <para>This command will evaluate
<varname index=
"false">Condition*=...
</varname> and
466 <varname index=
"false">Assert*=...
</varname> assignments, and print their values, and
467 the resulting value of the combined condition set. See
468 <citerefentry><refentrytitle>systemd.unit
</refentrytitle><manvolnum>5</manvolnum></citerefentry>
469 for a list of available conditions and asserts.
</para>
472 <title>Evaluate conditions that check kernel versions
</title>
474 <programlisting>$ systemd-analyze condition 'ConditionKernelVersion = !
<4.0' \
475 'ConditionKernelVersion =
>=
5.1' \
476 'ConditionACPower=|false' \
477 'ConditionArchitecture=|!arm' \
478 'AssertPathExists=/etc/os-release'
479 test.service: AssertPathExists=/etc/os-release succeeded.
481 test.service: ConditionArchitecture=|!arm succeeded.
482 test.service: ConditionACPower=|false failed.
483 test.service: ConditionKernelVersion=
>=
5.1 succeeded.
484 test.service: ConditionKernelVersion=!
<4.0 succeeded.
485 Conditions succeeded.
</programlisting>
490 <title><command>systemd-analyze syscall-filter
<optional><replaceable>SET
</replaceable>...
</optional></command></title>
492 <para>This command will list system calls contained in the specified system call set
493 <replaceable>SET
</replaceable>, or all known sets if no sets are specified. Argument
494 <replaceable>SET
</replaceable> must include the
<literal>@
</literal> prefix.
</para>
498 <title><command>systemd-analyze filesystems
<optional><replaceable>SET
</replaceable>...
</optional></command></title>
500 <para>This command will list filesystems in the specified filesystem set
501 <replaceable>SET
</replaceable>, or all known sets if no sets are specified. Argument
502 <replaceable>SET
</replaceable> must include the
<literal>@
</literal> prefix.
</para>
506 <title><command>systemd-analyze calendar
<replaceable>EXPRESSION
</replaceable>...
</command></title>
508 <para>This command will parse and normalize repetitive calendar time events, and will calculate when
509 they elapse next. This takes the same input as the
<varname>OnCalendar=
</varname> setting in
510 <citerefentry><refentrytitle>systemd.timer
</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
511 following the syntax described in
512 <citerefentry><refentrytitle>systemd.time
</refentrytitle><manvolnum>7</manvolnum></citerefentry>. By
513 default, only the next time the calendar expression will elapse is shown; use
514 <option>--iterations=
</option> to show the specified number of next times the expression
515 elapses. Each time the expression elapses forms a timestamp, see the
<command>timestamp
</command>
519 <title>Show leap days in the near future
</title>
521 <programlisting>$ systemd-analyze calendar --iterations=
5 '*-
2-
29 0:
0:
0'
522 Original form: *-
2-
29 0:
0:
0
523 Normalized form: *-
02-
29 00:
00:
00
524 Next elapse: Sat
2020-
02-
29 00:
00:
00 UTC
525 From now:
11 months
15 days left
526 Iter. #
2: Thu
2024-
02-
29 00:
00:
00 UTC
527 From now:
4 years
11 months left
528 Iter. #
3: Tue
2028-
02-
29 00:
00:
00 UTC
529 From now:
8 years
11 months left
530 Iter. #
4: Sun
2032-
02-
29 00:
00:
00 UTC
531 From now:
12 years
11 months left
532 Iter. #
5: Fri
2036-
02-
29 00:
00:
00 UTC
533 From now:
16 years
11 months left
539 <title><command>systemd-analyze timestamp
<replaceable>TIMESTAMP
</replaceable>...
</command></title>
541 <para>This command parses a timestamp (i.e. a single point in time) and outputs the normalized form and
542 the difference between this timestamp and now. The timestamp should adhere to the syntax documented in
543 <citerefentry><refentrytitle>systemd.time
</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
544 section
"PARSING TIMESTAMPS".
</para>
547 <title>Show parsing of timestamps
</title>
549 <programlisting>$ systemd-analyze timestamp yesterday now tomorrow
550 Original form: yesterday
551 Normalized form: Mon
2019-
05-
20 00:
00:
00 CEST
552 (in UTC): Sun
2019-
05-
19 22:
00:
00 UTC
553 UNIX seconds: @
15583032000
554 From now:
1 day
9h ago
557 Normalized form: Tue
2019-
05-
21 09:
48:
39 CEST
558 (in UTC): Tue
2019-
05-
21 07:
48:
39 UTC
559 UNIX seconds: @
1558424919.659757
562 Original form: tomorrow
563 Normalized form: Wed
2019-
05-
22 00:
00:
00 CEST
564 (in UTC): Tue
2019-
05-
21 22:
00:
00 UTC
565 UNIX seconds: @
15584760000
572 <title><command>systemd-analyze timespan
<replaceable>EXPRESSION
</replaceable>...
</command></title>
574 <para>This command parses a time span (i.e. a difference between two timestamps) and outputs the
575 normalized form and the equivalent value in microseconds. The time span should adhere to the syntax
577 <citerefentry><refentrytitle>systemd.time
</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
578 section
"PARSING TIME SPANS". Values without units are parsed as seconds.
</para>
581 <title>Show parsing of timespans
</title>
583 <programlisting>$ systemd-analyze timespan
1s
300s '
1year
0.000001s'
592 Original:
1year
0.000001s
600 <title><command>systemd-analyze cat-config
</command>
601 <replaceable>NAME
</replaceable>|
<replaceable>PATH
</replaceable>...
</title>
603 <para>This command is similar to
<command>systemctl cat
</command>, but operates on config files. It
604 will copy the contents of a config file and any drop-ins to standard output, using the usual systemd
605 set of directories and rules for precedence. Each argument must be either an absolute path including
606 the prefix (such as
<filename>/etc/systemd/logind.conf
</filename> or
607 <filename>/usr/lib/systemd/logind.conf
</filename>), or a name relative to the prefix (such as
608 <filename>systemd/logind.conf
</filename>).
</para>
611 <title>Showing logind configuration
</title>
612 <programlisting>$ systemd-analyze cat-config systemd/logind.conf
613 # /etc/systemd/logind.conf
619 # /usr/lib/systemd/logind.conf.d/
20-test.conf
620 ... some override from another package
622 # /etc/systemd/logind.conf.d/
50-override.conf
623 ... some administrator override
629 <title><command>systemd-analyze compare-versions
630 <replaceable>VERSION1
</replaceable>
631 <optional><replaceable>OP
</replaceable></optional>
632 <replaceable>VERSION2
</replaceable></command></title>
634 <para>This command has two distinct modes of operation, depending on whether the operator
635 <replaceable>OP
</replaceable> is specified.
</para>
637 <para>In the first mode — when
<replaceable>OP
</replaceable> is not specified — it will compare the two
638 version strings and print either
<literal><replaceable>VERSION1
</replaceable> <
639 <replaceable>VERSION2
</replaceable></literal>, or
<literal><replaceable>VERSION1
</replaceable> ==
640 <replaceable>VERSION2
</replaceable></literal>, or
<literal><replaceable>VERSION1
</replaceable> >
641 <replaceable>VERSION2
</replaceable></literal> as appropriate.
</para>
643 <para>The exit status is
<constant>0</constant> if the versions are equal,
<constant>11</constant> if
644 the version of the right is smaller, and
<constant>12</constant> if the version of the left is
645 smaller. (This matches the convention used by
<command>rpmdev-vercmp
</command>.)
</para>
647 <para>In the second mode — when
<replaceable>OP
</replaceable> is specified — it will compare the two
648 version strings using the operation
<replaceable>OP
</replaceable> and return
<constant>0</constant>
649 (success) if they condition is satisfied, and
<constant>1</constant> (failure)
650 otherwise.
<constant>OP
</constant> may be
<command>lt
</command>,
<command>le
</command>,
651 <command>eq
</command>,
<command>ne
</command>,
<command>ge
</command>,
<command>gt
</command>. In this
652 mode, no output is printed.
653 (This matches the convention used by
654 <citerefentry project='die-net'
><refentrytitle>dpkg
</refentrytitle><manvolnum>1</manvolnum></citerefentry>
655 <option>--compare-versions
</option>.)
</para>
658 <title>Compare versions of a package
</title>
661 $ systemd-analyze compare-versions systemd-
250~rc1.fc36.aarch64 systemd-
251.fc36.aarch64
662 systemd-
250~rc1.fc36.aarch64
< systemd-
251.fc36.aarch64
666 $ systemd-analyze compare-versions
1 lt
2; echo $?
668 $ systemd-analyze compare-versions
1 ge
2; echo $?
675 <title><command>systemd-analyze verify
<replaceable>FILE
</replaceable>...
</command></title>
677 <para>This command will load unit files and print warnings if any errors are detected. Files specified
678 on the command line will be loaded, but also any other units referenced by them. A unit's name on disk
679 can be overridden by specifying an alias after a colon; see below for an example. The full unit search
680 path is formed by combining the directories for all command line arguments, and the usual unit load
681 paths. The variable
<varname>$SYSTEMD_UNIT_PATH
</varname> is supported, and may be used to replace or
682 augment the compiled in set of unit load paths; see
683 <citerefentry><refentrytitle>systemd.unit
</refentrytitle><manvolnum>5</manvolnum></citerefentry>. All
684 units files present in the directories containing the command line arguments will be used in preference
685 to the other paths.
</para>
687 <para>The following errors are currently detected:
</para>
689 <listitem><para>unknown sections and directives,
</para></listitem>
691 <listitem><para>missing dependencies which are required to start the given unit,
</para></listitem>
693 <listitem><para>man pages listed in
<varname>Documentation=
</varname> which are not found in the
694 system,
</para></listitem>
696 <listitem><para>commands listed in
<varname>ExecStart=
</varname> and similar which are not found in
697 the system or not executable.
</para></listitem>
701 <title>Misspelt directives
</title>
703 <programlisting>$ cat ./user.slice
706 Documentation=man:nosuchfile(
1)
707 Requires=different.service
712 $ systemd-analyze verify ./user.slice
713 [./user.slice:
9] Unknown lvalue 'WhatIsThis' in section 'Unit'
714 [./user.slice:
13] Unknown section 'Service'. Ignoring.
715 Error: org.freedesktop.systemd1.LoadFailed:
716 Unit different.service failed to load:
717 No such file or directory.
718 Failed to create user.slice/start: Invalid argument
719 user.slice: man nosuchfile(
1) command failed with code
16
724 <title>Missing service units
</title>
726 <programlisting>$ tail ./a.socket ./b.socket
727 ==
> ./a.socket
<==
731 ==
> ./b.socket
<==
736 $ systemd-analyze verify ./a.socket ./b.socket
737 Service a.service not loaded, a.socket cannot be started.
738 Service b@
0.service not loaded, b.socket cannot be started.
743 <title>Aliasing a unit
</title>
745 <programlisting>$ cat /tmp/source
747 Description=Hostname printer
751 ExecStart=/usr/bin/echo %H
754 $ systemd-analyze verify /tmp/source
755 Failed to prepare filename /tmp/source: Invalid argument
757 $ systemd-analyze verify /tmp/source:alias.service
758 alias.service:
7: Unknown key name 'MysteryKey' in section 'Service', ignoring.
765 <title><command>systemd-analyze security
<optional><replaceable>UNIT
</replaceable>...
</optional></command></title>
767 <para>This command analyzes the security and sandboxing settings of one or more specified service
768 units. If at least one unit name is specified the security settings of the specified service units are
769 inspected and a detailed analysis is shown. If no unit name is specified, all currently loaded,
770 long-running service units are inspected and a terse table with results shown. The command checks for
771 various security-related service settings, assigning each a numeric
"exposure level" value, depending
772 on how important a setting is. It then calculates an overall exposure level for the whole unit, which
773 is an estimation in the range
0.0…
10.0 indicating how exposed a service is security-wise. High exposure
774 levels indicate very little applied sandboxing. Low exposure levels indicate tight sandboxing and
775 strongest security restrictions. Note that this only analyzes the per-service security features systemd
776 itself implements. This means that any additional security mechanisms applied by the service code
777 itself are not accounted for. The exposure level determined this way should not be misunderstood: a
778 high exposure level neither means that there is no effective sandboxing applied by the service code
779 itself, nor that the service is actually vulnerable to remote or local attacks. High exposure levels do
780 indicate however that most likely the service might benefit from additional settings applied to
783 <para>Please note that many of the security and sandboxing settings individually can be circumvented —
784 unless combined with others. For example, if a service retains the privilege to establish or undo mount
785 points many of the sandboxing options can be undone by the service code itself. Due to that is
786 essential that each service uses the most comprehensive and strict sandboxing and security settings
787 possible. The tool will take into account some of these combinations and relationships between the
788 settings, but not all. Also note that the security and sandboxing settings analyzed here only apply to
789 the operations executed by the service code itself. If a service has access to an IPC system (such as
790 D-Bus) it might request operations from other services that are not subject to the same
791 restrictions. Any comprehensive security and sandboxing analysis is hence incomplete if the IPC access
792 policy is not validated too.
</para>
795 <title>Analyze
<filename index=
"false">systemd-logind.service
</filename></title>
797 <programlisting>$ systemd-analyze security --no-pager systemd-logind.service
798 NAME DESCRIPTION EXPOSURE
799 ✗ PrivateNetwork= Service has access to the host's network
0.5
800 ✗ User=/DynamicUser= Service runs as root user
0.4
801 ✗ DeviceAllow= Service has no device ACL
0.2
802 ✓ IPAddressDeny= Service blocks all IP address ranges
804 → Overall exposure level for systemd-logind.service:
4.1 OK 🙂
810 <title><command>systemd-analyze inspect-elf
<replaceable>FILE
</replaceable>...
</command></title>
812 <para>This command will load the specified files, and if they are ELF objects (executables,
813 libraries, core files, etc.) it will parse the embedded packaging metadata, if any, and print
814 it in a table or json format. See the
<ulink url=
"https://systemd.io/COREDUMP_PACKAGE_METADATA/">
815 Packaging Metadata
</ulink> documentation for more information.
</para>
818 <title>Print information about a core file as JSON
</title>
820 <programlisting>$ systemd-analyze inspect-elf --json=pretty \
821 core.fsverity
.1000.f77dac5dc161402aa44e15b7dd9dcf97.58561
.1637106137000000
823 "elfType" :
"coredump",
824 "elfArchitecture" :
"AMD x86-64",
825 "/home/bluca/git/fsverity-utils/fsverity" : {
827 "name" :
"fsverity-utils",
829 "buildId" :
"7c895ecd2a271f93e96268f479fdc3c64a2ec4ee"
831 "/home/bluca/git/fsverity-utils/libfsverity.so.0" : {
833 "name" :
"fsverity-utils",
835 "buildId" :
"b5e428254abf14237b0ae70ed85fffbb98a78f88"
843 <title><command>systemd-analyze fdstore
<replaceable>UNIT
</replaceable>...
</command></title>
845 <para>Lists the current contents of the specified service unit's file descriptor store. This shows
846 names, inode types, device numbers, inode numbers, paths and open modes of the open file
847 descriptors. The specified units must have
<varname>FileDescriptorStoreMax=
</varname> enabled, see
848 <citerefentry><refentrytitle>systemd.service
</refentrytitle><manvolnum>5</manvolnum></citerefentry> for
852 <title>Table output
</title>
853 <programlisting>$ systemd-analyze fdstore systemd-journald.service
854 FDNAME TYPE DEVNO INODE RDEVNO PATH FLAGS
855 stored sock
0:
8 4218620 - socket:[
4218620] ro
856 stored sock
0:
8 4213198 - socket:[
4213198] ro
857 stored sock
0:
8 4213190 - socket:[
4213190] ro
861 <para>Note: the
"DEVNO" column refers to the major/minor numbers of the device node backing the file
862 system the file descriptor's inode is on. The
"RDEVNO" column refers to the major/minor numbers of the
863 device node itself if the file descriptor refers to one. Compare with corresponding
864 <varname>.st_dev
</varname> and
<varname>.st_rdev
</varname> fields in
<type>struct stat
</type> (see
866 project='man-pages'
><refentrytitle>stat
</refentrytitle><manvolnum>2</manvolnum></citerefentry> for
867 details). The listed inode numbers in the
"INODE" column are on the file system indicated by
872 <title><command>systemd-analyze image-policy
<replaceable>POLICY
</replaceable>…
</command></title>
874 <para>This command analyzes the specified image policy string, as per
875 <citerefentry><refentrytitle>systemd.image-policy
</refentrytitle><manvolnum>7</manvolnum></citerefentry>. The
876 policy is normalized and simplified. For each currently defined partition identifier (as per the
<ulink
877 url=
"https://uapi-group.org/specifications/specs/discoverable_partitions_specification">Discoverable
878 Partitions Specification
</ulink>) the effect of the image policy string is shown in tabular form.
</para>
881 <title>Example Output
</title>
883 <programlisting>$ systemd-analyze image-policy swap=encrypted:usr=read-only-on+verity:root=encrypted
884 Analyzing policy: root=encrypted:usr=verity+read-only-on:swap=encrypted
885 Long form: root=encrypted:usr=verity+read-only-on:swap=encrypted:=unused+absent
887 PARTITION MODE READ-ONLY GROWFS
895 root-verity ignore - -
896 usr-verity unprotected yes -
897 root-verity-sig ignore - -
898 usr-verity-sig ignore - -
901 default ignore - -
</programlisting>
906 <title><command>systemd-analyze pcrs
<optional><replaceable>PCR
</replaceable>…
</optional></command></title>
908 <para>This command shows the known TPM2 PCRs along with their identifying names and current values.
</para>
911 <title>Example Output
</title>
913 <programlisting>$ systemd-analyze pcrs
915 0 platform-code bcd2eb527108bbb1f5528409bcbe310aa9b74f687854cc5857605993f3d9eb11
916 1 platform-config b60622856eb7ce52637b80f30a520e6e87c347daa679f3335f4f1a600681bb01
917 2 external-code
1471262403e9a62f9c392941300b4807fbdb6f0bfdd50abfab752732087017dd
918 3 external-config
3d458cfe55cc03ea1f443f1562beec8df51c75e14a9fcf9a7234a13f198e7969
919 4 boot-loader-code
939f7fa1458e1f7ce968874d908e524fc0debf890383d355e4ce347b7b78a95c
920 5 boot-loader-config
864c61c5ea5ecbdb6951e6cb6d9c1f4b4eac79772f7fe13b8bece569d83d3768
921 6 -
3d458cfe55cc03ea1f443f1562beec8df51c75e14a9fcf9a7234a13f198e7969
922 7 secure-boot-policy
9c905bd9b9891bfb889b90a54c4b537b889cfa817c4389cc25754823a9443255
923 8 -
0000000000000000000000000000000000000000000000000000000000000000
924 9 kernel-initrd
9caa29b128113ef42aa53d421f03437be57211e5ebafc0fa8b5d4514ee37ff0c
925 10 ima
5ea9e3dab53eb6b483b6ec9e3b2c712bea66bca1b155637841216e0094387400
926 11 kernel-boot
0000000000000000000000000000000000000000000000000000000000000000
927 12 kernel-config
627ffa4b405e911902fe1f1a8b0164693b31acab04f805f15bccfe2209c7eace
928 13 sysexts
0000000000000000000000000000000000000000000000000000000000000000
929 14 shim-policy
0000000000000000000000000000000000000000000000000000000000000000
930 15 system-identity
0000000000000000000000000000000000000000000000000000000000000000
931 16 debug
0000000000000000000000000000000000000000000000000000000000000000
932 17 - ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
933 18 - ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
934 19 - ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
935 20 - ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
936 21 - ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
937 22 - ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
938 23 application-support
0000000000000000000000000000000000000000000000000000000000000000</programlisting>
943 <title><command>systemd-analyze srk
<optional>><replaceable>FILE
</replaceable></optional></command></title>
945 <para>This command reads the Storage Root Key (SRK) from the TPM2 device, and writes it in marshalled
946 TPM2B_PUBLIC format to stdout. The output is non-printable data, so it should be redirected to a file
947 or into a pipe.
</para>
950 <title>Save the Storage Root Key to
<filename>srk.tpm2b_public
</filename></title>
952 <programlisting>systemd-analyze srk
>srk.tpm2b_public
</programlisting>
957 <title><command>systemd-analyze architectures
<optional><replaceable>NAME
</replaceable>...
</optional></command></title>
959 <para>Lists all known CPU architectures, and which ones are native. The listed architecture names are
960 those
<varname>ConditionArchitecture=
</varname> supports, see
961 <citerefentry><refentrytitle>systemd.unit
</refentrytitle><manvolnum>5</manvolnum></citerefentry> for
962 details. If architecture names are specified only those specified are listed.
</para>
965 <title>Table output
</title>
966 <programlisting>$ systemd-analyze architectures
978 x86-
64 native
</programlisting>
985 <title>Options
</title>
987 <para>The following options are understood:
</para>
991 <term><option>--system
</option></term>
993 <listitem><para>Operates on the system systemd instance. This
994 is the implied default.
</para>
996 <xi:include href=
"version-info.xml" xpointer=
"v209"/></listitem>
1000 <term><option>--user
</option></term>
1002 <listitem><para>Operates on the user systemd
1005 <xi:include href=
"version-info.xml" xpointer=
"v186"/></listitem>
1009 <term><option>--global
</option></term>
1011 <listitem><para>Operates on the system-wide configuration for
1012 user systemd instance.
</para>
1014 <xi:include href=
"version-info.xml" xpointer=
"v238"/></listitem>
1018 <term><option>--order
</option></term>
1019 <term><option>--require
</option></term>
1021 <listitem><para>When used in conjunction with the
<command>dot
</command> command (see above),
1022 selects which dependencies are shown in the dependency graph. If
<option>--order
</option> is passed,
1023 only dependencies of type
<varname>After=
</varname> or
<varname>Before=
</varname> are shown.
1024 If
<option>--require
</option> is passed, only dependencies of type
<varname>Requires=
</varname>,
1025 <varname>Requisite=
</varname>,
<varname>BindsTo=
</varname>,
<varname>Wants=
</varname>, and
1026 <varname>Conflicts=
</varname> are shown. If neither is passed, this shows dependencies of
1027 all these types.
</para>
1029 <xi:include href=
"version-info.xml" xpointer=
"v198"/></listitem>
1033 <term><option>--from-pattern=
</option></term>
1034 <term><option>--to-pattern=
</option></term>
1036 <listitem><para>When used in conjunction with the
1037 <command>dot
</command> command (see above), this selects which
1038 relationships are shown in the dependency graph. Both options
1040 <citerefentry project='man-pages'
><refentrytitle>glob
</refentrytitle><manvolnum>7</manvolnum></citerefentry>
1041 pattern as an argument, which will be matched against the
1042 left-hand and the right-hand, respectively, nodes of a
1043 relationship.
</para>
1045 <para>Each of these can be used more than once, in which case
1046 the unit name must match one of the values. When tests for
1047 both sides of the relation are present, a relation must pass
1048 both tests to be shown. When patterns are also specified as
1049 positional arguments, they must match at least one side of the
1050 relation. In other words, patterns specified with those two
1051 options will trim the list of edges matched by the positional
1052 arguments, if any are given, and fully determine the list of
1053 edges shown otherwise.
</para>
1055 <xi:include href=
"version-info.xml" xpointer=
"v201"/></listitem>
1059 <term><option>--fuzz=
<replaceable>timespan
</replaceable></option></term>
1061 <listitem><para>When used in conjunction with the
1062 <command>critical-chain
</command> command (see above), also
1063 show units, which finished
<replaceable>timespan
</replaceable>
1064 earlier, than the latest unit in the same level. The unit of
1065 <replaceable>timespan
</replaceable> is seconds unless
1066 specified with a different unit, e.g.
1069 <xi:include href=
"version-info.xml" xpointer=
"v203"/></listitem>
1073 <term><option>--man=no
</option></term>
1075 <listitem><para>Do not invoke
1076 <citerefentry project='man-pages'
><refentrytitle>man
</refentrytitle><manvolnum>1</manvolnum></citerefentry>
1077 to verify the existence of man pages listed in
<varname>Documentation=
</varname>.
</para>
1079 <xi:include href=
"version-info.xml" xpointer=
"v235"/></listitem>
1083 <term><option>--generators
</option></term>
1085 <listitem><para>Invoke unit generators, see
1086 <citerefentry><refentrytitle>systemd.generator
</refentrytitle><manvolnum>7</manvolnum></citerefentry>.
1087 Some generators require root privileges. Under a normal user, running with
1088 generators enabled will generally result in some warnings.
</para>
1090 <xi:include href=
"version-info.xml" xpointer=
"v235"/></listitem>
1094 <term><option>--recursive-errors=
<replaceable>MODE
</replaceable></option></term>
1096 <listitem><para>Control verification of units and their dependencies and whether
1097 <command>systemd-analyze verify
</command> exits with a non-zero process exit status or not. With
1098 <command>yes
</command>, return a non-zero process exit status when warnings arise during verification
1099 of either the specified unit or any of its associated dependencies. With
<command>no
</command>,
1100 return a non-zero process exit status when warnings arise during verification of only the specified
1101 unit. With
<command>one
</command>, return a non-zero process exit status when warnings arise during
1102 verification of either the specified unit or its immediate dependencies. If this option is not
1103 specified, zero is returned as the exit status regardless whether warnings arise during verification
1106 <xi:include href=
"version-info.xml" xpointer=
"v250"/></listitem>
1110 <term><option>--root=
<replaceable>PATH
</replaceable></option></term>
1112 <listitem><para>With
<command>cat-config
</command>,
<command>verify
</command>,
1113 <command>condition
</command> and
<command>security
</command> when used with
1114 <option>--offline=
</option>, operate on files underneath the specified root path
1115 <replaceable>PATH
</replaceable>.
</para>
1117 <xi:include href=
"version-info.xml" xpointer=
"v239"/></listitem>
1121 <term><option>--image=
<replaceable>PATH
</replaceable></option></term>
1123 <listitem><para>With
<command>cat-config
</command>,
<command>verify
</command>,
1124 <command>condition
</command> and
<command>security
</command> when used with
1125 <option>--offline=
</option>, operate on files inside the specified image path
1126 <replaceable>PATH
</replaceable>.
</para>
1128 <xi:include href=
"version-info.xml" xpointer=
"v250"/></listitem>
1131 <xi:include href=
"standard-options.xml" xpointer=
"image-policy-open" />
1134 <term><option>--offline=
<replaceable>BOOL
</replaceable></option></term>
1136 <listitem><para>With
<command>security
</command>, perform an offline security review
1137 of the specified unit files, i.e. does not have to rely on PID
1 to acquire security
1138 information for the files like the
<command>security
</command> verb when used by itself does.
1139 This means that
<option>--offline=
</option> can be used with
<option>--root=
</option> and
1140 <option>--image=
</option> as well. If a unit's overall exposure level is above that set by
1141 <option>--threshold=
</option> (default value is
100),
<option>--offline=
</option> will return
1144 <xi:include href=
"version-info.xml" xpointer=
"v250"/></listitem>
1148 <term><option>--profile=
<replaceable>PATH
</replaceable></option></term>
1150 <listitem><para>With
<command>security
</command> <option>--offline=
</option>, takes into
1151 consideration the specified portable profile when assessing unit settings.
1152 The profile can be passed by name, in which case the well-known system locations will
1153 be searched, or it can be the full path to a specific drop-in file.
</para>
1155 <xi:include href=
"version-info.xml" xpointer=
"v250"/></listitem>
1159 <term><option>--threshold=
<replaceable>NUMBER
</replaceable></option></term>
1161 <listitem><para>With
<command>security
</command>, allow the user to set a custom value
1162 to compare the overall exposure level with, for the specified unit files. If a unit's
1163 overall exposure level, is greater than that set by the user,
<command>security
</command>
1164 will return an error.
<option>--threshold=
</option> can be used with
<option>--offline=
</option>
1165 as well and its default value is
100.
</para>
1167 <xi:include href=
"version-info.xml" xpointer=
"v250"/></listitem>
1171 <term><option>--security-policy=
<replaceable>PATH
</replaceable></option></term>
1173 <listitem><para>With
<command>security
</command>, allow the user to define a custom set of
1174 requirements formatted as a JSON file against which to compare the specified unit file(s)
1175 and determine their overall exposure level to security threats.
</para>
1178 <title>Accepted Assessment Test Identifiers
</title>
1181 <colspec colname='directive'
/>
1184 <entry>Assessment Test Identifier
</entry>
1189 <entry>UserOrDynamicUser
</entry>
1192 <entry>SupplementaryGroups
</entry>
1195 <entry>PrivateMounts
</entry>
1198 <entry>PrivateDevices
</entry>
1201 <entry>PrivateTmp
</entry>
1204 <entry>PrivateNetwork
</entry>
1207 <entry>PrivateUsers
</entry>
1210 <entry>ProtectControlGroups
</entry>
1213 <entry>ProtectKernelModules
</entry>
1216 <entry>ProtectKernelTunables
</entry>
1219 <entry>ProtectKernelLogs
</entry>
1222 <entry>ProtectClock
</entry>
1225 <entry>ProtectHome
</entry>
1228 <entry>ProtectHostname
</entry>
1231 <entry>ProtectSystem
</entry>
1234 <entry>RootDirectoryOrRootImage
</entry>
1237 <entry>LockPersonality
</entry>
1240 <entry>MemoryDenyWriteExecute
</entry>
1243 <entry>NoNewPrivileges
</entry>
1246 <entry>CapabilityBoundingSet_CAP_SYS_ADMIN
</entry>
1249 <entry>CapabilityBoundingSet_CAP_SET_UID_GID_PCAP
</entry>
1252 <entry>CapabilityBoundingSet_CAP_SYS_PTRACE
</entry>
1255 <entry>CapabilityBoundingSet_CAP_SYS_TIME
</entry>
1258 <entry>CapabilityBoundingSet_CAP_NET_ADMIN
</entry>
1261 <entry>CapabilityBoundingSet_CAP_SYS_RAWIO
</entry>
1264 <entry>CapabilityBoundingSet_CAP_SYS_MODULE
</entry>
1267 <entry>CapabilityBoundingSet_CAP_AUDIT
</entry>
1270 <entry>CapabilityBoundingSet_CAP_SYSLOG
</entry>
1273 <entry>CapabilityBoundingSet_CAP_SYS_NICE_RESOURCE
</entry>
1276 <entry>CapabilityBoundingSet_CAP_MKNOD
</entry>
1279 <entry>CapabilityBoundingSet_CAP_CHOWN_FSETID_SETFCAP
</entry>
1282 <entry>CapabilityBoundingSet_CAP_DAC_FOWNER_IPC_OWNER
</entry>
1285 <entry>CapabilityBoundingSet_CAP_KILL
</entry>
1288 <entry>CapabilityBoundingSet_CAP_NET_BIND_SERVICE_BROADCAST_RAW
</entry>
1291 <entry>CapabilityBoundingSet_CAP_SYS_BOOT
</entry>
1294 <entry>CapabilityBoundingSet_CAP_MAC
</entry>
1297 <entry>CapabilityBoundingSet_CAP_LINUX_IMMUTABLE
</entry>
1300 <entry>CapabilityBoundingSet_CAP_IPC_LOCK
</entry>
1303 <entry>CapabilityBoundingSet_CAP_SYS_CHROOT
</entry>
1306 <entry>CapabilityBoundingSet_CAP_BLOCK_SUSPEND
</entry>
1309 <entry>CapabilityBoundingSet_CAP_WAKE_ALARM
</entry>
1312 <entry>CapabilityBoundingSet_CAP_LEASE
</entry>
1315 <entry>CapabilityBoundingSet_CAP_SYS_TTY_CONFIG
</entry>
1318 <entry>CapabilityBoundingSet_CAP_BPF
</entry>
1321 <entry>UMask
</entry>
1324 <entry>KeyringMode
</entry>
1327 <entry>ProtectProc
</entry>
1330 <entry>ProcSubset
</entry>
1333 <entry>NotifyAccess
</entry>
1336 <entry>RemoveIPC
</entry>
1339 <entry>Delegate
</entry>
1342 <entry>RestrictRealtime
</entry>
1345 <entry>RestrictSUIDSGID
</entry>
1348 <entry>RestrictNamespaces_user
</entry>
1351 <entry>RestrictNamespaces_mnt
</entry>
1354 <entry>RestrictNamespaces_ipc
</entry>
1357 <entry>RestrictNamespaces_pid
</entry>
1360 <entry>RestrictNamespaces_cgroup
</entry>
1363 <entry>RestrictNamespaces_uts
</entry>
1366 <entry>RestrictNamespaces_net
</entry>
1369 <entry>RestrictAddressFamilies_AF_INET_INET6
</entry>
1372 <entry>RestrictAddressFamilies_AF_UNIX
</entry>
1375 <entry>RestrictAddressFamilies_AF_NETLINK
</entry>
1378 <entry>RestrictAddressFamilies_AF_PACKET
</entry>
1381 <entry>RestrictAddressFamilies_OTHER
</entry>
1384 <entry>SystemCallArchitectures
</entry>
1387 <entry>SystemCallFilter_swap
</entry>
1390 <entry>SystemCallFilter_obsolete
</entry>
1393 <entry>SystemCallFilter_clock
</entry>
1396 <entry>SystemCallFilter_cpu_emulation
</entry>
1399 <entry>SystemCallFilter_debug
</entry>
1402 <entry>SystemCallFilter_mount
</entry>
1405 <entry>SystemCallFilter_module
</entry>
1408 <entry>SystemCallFilter_raw_io
</entry>
1411 <entry>SystemCallFilter_reboot
</entry>
1414 <entry>SystemCallFilter_privileged
</entry>
1417 <entry>SystemCallFilter_resources
</entry>
1420 <entry>IPAddressDeny
</entry>
1423 <entry>DeviceAllow
</entry>
1426 <entry>AmbientCapabilities
</entry>
1432 <para>See example
"JSON Policy" below.
</para>
1434 <xi:include href=
"version-info.xml" xpointer=
"v250"/></listitem>
1438 <term><option>--json=
<replaceable>MODE
</replaceable></option></term>
1440 <listitem><para>With the
<command>security
</command> command, generate a JSON formatted
1441 output of the security analysis table. The format is a JSON array with objects
1442 containing the following fields:
<varname>set
</varname> which indicates if the setting has
1443 been enabled or not,
<varname>name
</varname> which is what is used to refer to the setting,
1444 <varname>json_field
</varname> which is the JSON compatible identifier of the setting,
1445 <varname>description
</varname> which is an outline of the setting state, and
1446 <varname>exposure
</varname> which is a number in the range
0.0…
10.0, where a higher value
1447 corresponds to a higher security threat. The JSON version of the table is printed to standard
1448 output. The
<replaceable>MODE
</replaceable> passed to the option can be one of three:
1449 <option>off
</option> which is the default,
<option>pretty
</option> and
<option>short
</option>
1450 which respectively output a prettified or shorted JSON version of the security table.
1452 With the
<command>plot
</command> command, generate a JSON formatted output of the raw time data.
1453 The format is a JSON array with objects containing the following fields:
<varname>name
</varname>
1454 which is the unit name,
<varname>activated
</varname> which is the time after startup the
1455 service was activated,
<varname>activating
</varname> which is how long after startup the service
1456 was initially started,
<varname>time
</varname> which is how long the service took to activate
1457 from when it was initially started,
<varname>deactivated
</varname> which is the time after startup
1458 that the service was deactivated,
<varname>deactivating
</varname> which is the time after startup
1459 that the service was initially told to deactivate.
1462 <xi:include href=
"version-info.xml" xpointer=
"v250"/></listitem>
1466 <term><option>--iterations=
<replaceable>NUMBER
</replaceable></option></term>
1468 <listitem><para>When used with the
<command>calendar
</command> command, show the specified number of
1469 iterations the specified calendar expression will elapse next. Defaults to
1.
</para>
1471 <xi:include href=
"version-info.xml" xpointer=
"v242"/></listitem>
1475 <term><option>--base-time=
<replaceable>TIMESTAMP
</replaceable></option></term>
1477 <listitem><para>When used with the
<command>calendar
</command> command, show next iterations relative
1478 to the specified point in time. If not specified defaults to the current time.
</para>
1480 <xi:include href=
"version-info.xml" xpointer=
"v244"/></listitem>
1484 <term><option>--unit=
<replaceable>UNIT
</replaceable></option></term>
1486 <listitem><para>When used with the
<command>condition
</command> command, evaluate all the
1487 <varname index=
"false">Condition*=...
</varname> and
<varname index=
"false">Assert*=...
</varname>
1488 assignments in the specified unit file. The full unit search path is formed by combining the
1489 directories for the specified unit with the usual unit load paths. The variable
1490 <varname>$SYSTEMD_UNIT_PATH
</varname> is supported, and may be used to replace or augment the
1491 compiled in set of unit load paths; see
1492 <citerefentry><refentrytitle>systemd.unit
</refentrytitle><manvolnum>5</manvolnum></citerefentry>. All
1493 units files present in the directory containing the specified unit will be used in preference to the
1496 <xi:include href=
"version-info.xml" xpointer=
"v250"/></listitem>
1500 <term><option>--table
</option></term>
1502 <listitem><para>When used with the
<command>plot
</command> command, the raw time data is output in a table.
1505 <xi:include href=
"version-info.xml" xpointer=
"v253"/></listitem>
1509 <term><option>--no-legend
</option></term>
1511 <listitem><para>When used with the
<command>plot
</command> command in combination with either
1512 <option>--table
</option> or
<option>--json=
</option>, no legends or hints are included in the output.
1515 <xi:include href=
"version-info.xml" xpointer=
"v253"/></listitem>
1518 <xi:include href=
"user-system-options.xml" xpointer=
"host" />
1519 <xi:include href=
"user-system-options.xml" xpointer=
"machine" />
1522 <term><option>-q
</option></term>
1523 <term><option>--quiet
</option></term>
1525 <listitem><para>Suppress hints and other non-essential output.
</para>
1527 <xi:include href=
"version-info.xml" xpointer=
"v250"/></listitem>
1531 <term><option>--tldr
</option></term>
1533 <listitem><para>With
<command>cat-config
</command>, only print the
"interesting" parts of the
1534 configuration files, skipping comments and empty lines and section headers followed only by
1535 comments and empty lines.
</para>
1537 <xi:include href=
"version-info.xml" xpointer=
"v255"/></listitem>
1540 <xi:include href=
"standard-options.xml" xpointer=
"help" />
1541 <xi:include href=
"standard-options.xml" xpointer=
"version" />
1542 <xi:include href=
"standard-options.xml" xpointer=
"no-pager" />
1548 <title>Exit status
</title>
1550 <para>For most commands,
0 is returned on success, and a non-zero failure code otherwise.
</para>
1552 <para>With the verb
<command>compare-versions
</command>, in the two-argument form,
1553 <constant>12</constant>,
<constant>0</constant>,
<constant>11</constant> is returned if the second
1554 version string is respectively larger, equal, or smaller to the first. In the three-argument form,
1555 <constant>0</constant> or
<constant>1</constant> if the condition is respectively true or false.
</para>
1558 <xi:include href=
"common-variables.xml" />
1561 <title>Examples
</title>
1564 <title>JSON Policy
</title>
1566 <para>The JSON file passed as a path parameter to
<option>--security-policy=
</option> has a top-level
1567 JSON object, with keys being the assessment test identifiers mentioned above. The values in the file
1568 should be JSON objects with one or more of the following fields:
<option>description_na
</option>
1569 (string),
<option>description_good
</option> (string),
<option>description_bad
</option> (string),
1570 <option>weight
</option> (unsigned integer), and
<option>range
</option> (unsigned integer). If any of
1571 these fields corresponding to a specific id of the unit file is missing from the JSON object, the
1572 default built-in field value corresponding to that same id is used for security analysis as default.
1573 The weight and range fields are used in determining the overall exposure level of the unit files: the
1574 value of each setting is assigned a badness score, which is multiplied by the policy weight and divided
1575 by the policy range to determine the overall exposure that the setting implies. The computed badness is
1576 summed across all settings in the unit file, normalized to the
1…
100 range, and used to determine the
1577 overall exposure level of the unit. By allowing users to manipulate these fields, the 'security' verb
1578 gives them the option to decide for themself which ids are more important and hence should have a
1579 greater effect on the exposure level. A weight of
<literal>0</literal> means the setting will not be
1586 "description_good":
"Service has no access to hardware devices",
1587 "description_bad":
"Service potentially has access to hardware devices",
1593 "description_good":
"Service cannot install system mounts",
1594 "description_bad":
"Service may install system mounts",
1600 "description_good":
"Service has no access to the host's network",
1601 "description_bad":
"Service has access to the host's network",
1607 "description_good":
"Service has no access to other software's temporary files",
1608 "description_bad":
"Service has access to other software's temporary files",
1614 "description_good":
"Service does not have access to other users",
1615 "description_bad":
"Service has access to other users",
1625 <title>See Also
</title>
1626 <para><simplelist type=
"inline">
1627 <member><citerefentry><refentrytitle>systemd
</refentrytitle><manvolnum>1</manvolnum></citerefentry></member>
1628 <member><citerefentry><refentrytitle>systemctl
</refentrytitle><manvolnum>1</manvolnum></citerefentry></member>
1629 </simplelist></para>