1 2021-01-08 Mike Frysinger <vapier@gentoo.org>
3 * configure: Regenerate.
5 2021-01-04 Mike Frysinger <vapier@gentoo.org>
7 * configure: Regenerate.
9 2017-09-06 John Baldwin <jhb@FreeBSD.org>
11 * configure: Regenerate.
13 2016-01-10 Mike Frysinger <vapier@gentoo.org>
15 * config.in, configure: Regenerate.
17 2016-01-10 Mike Frysinger <vapier@gentoo.org>
19 * configure: Regenerate.
21 2016-01-10 Mike Frysinger <vapier@gentoo.org>
23 * configure: Regenerate.
25 2016-01-10 Mike Frysinger <vapier@gentoo.org>
27 * configure: Regenerate.
29 2016-01-10 Mike Frysinger <vapier@gentoo.org>
31 * configure: Regenerate.
33 2016-01-10 Mike Frysinger <vapier@gentoo.org>
35 * configure: Regenerate.
37 2016-01-10 Mike Frysinger <vapier@gentoo.org>
39 * configure: Regenerate.
41 2016-01-10 Mike Frysinger <vapier@gentoo.org>
43 * configure: Regenerate.
45 2016-01-09 Mike Frysinger <vapier@gentoo.org>
47 * config.in, configure: Regenerate.
49 2016-01-06 Mike Frysinger <vapier@gentoo.org>
51 * interp.c (sim_open): Mark argv const.
52 (sim_create_inferior): Mark argv and env const.
54 2016-01-04 Mike Frysinger <vapier@gentoo.org>
56 * configure: Regenerate.
58 2016-01-03 Mike Frysinger <vapier@gentoo.org>
60 * interp.c (sim_open): Update sim_parse_args comment.
62 2016-01-03 Mike Frysinger <vapier@gentoo.org>
64 * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete.
65 * configure: Regenerate.
67 2016-01-02 Mike Frysinger <vapier@gentoo.org>
69 * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to
71 * configure: Regenerate.
73 2015-12-30 Mike Frysinger <vapier@gentoo.org>
75 * wrapper.c (v850_reg_store, v850_reg_fetch): Define.
76 (sim_open): Call CPU_REG_FETCH/CPU_REG_STORE.
77 (sim_store_register): Rename to ...
78 (v850_reg_store): ... this.
79 (sim_fetch_register): Rename to ...
80 (v850_reg_fetch): ... this.
82 2015-12-27 Mike Frysinger <vapier@gentoo.org>
84 * Makefile.in (SIM_OBJS): Delete sim-hload.o.
86 2015-12-26 Mike Frysinger <vapier@gentoo.org>
88 * config.in, configure: Regenerate.
90 2015-12-24 Mike Frysinger <vapier@gentoo.org>
92 * sim-main.h (WITH_WATCHPOINTS): Delete.
94 2015-12-15 Dominik Vogt <vogt@linux.vnet.ibm.com>
96 * simops.c (v850_bins): Fix left shift of negative value.
98 2015-11-17 Mike Frysinger <vapier@gentoo.org>
100 * sim-main.h (WITH_CORE): Delete.
102 2015-11-17 Mike Frysinger <vapier@gentoo.org>
104 * sim-main.h (WITH_MODULO_MEMORY): Delete.
106 2015-11-15 Mike Frysinger <vapier@gentoo.org>
108 * Makefile.in (SIM_OBJS): Delete sim-reason.o and sim-stop.o.
110 2015-11-14 Mike Frysinger <vapier@gentoo.org>
112 * interp.c (sim_close): Delete.
114 2015-06-23 Mike Frysinger <vapier@gentoo.org>
116 * configure: Regenerate.
118 2015-06-12 Mike Frysinger <vapier@gentoo.org>
120 * configure: Regenerate.
122 2015-06-12 Mike Frysinger <vapier@gentoo.org>
124 * configure: Regenerate.
126 2015-06-11 Mike Frysinger <vapier@gentoo.org>
128 * interp.c (INLINE): Delete define.
130 2015-04-18 Mike Frysinger <vapier@gentoo.org>
132 * sim-main.h (SIM_CPU): Delete.
134 2015-04-18 Mike Frysinger <vapier@gentoo.org>
136 * sim-main.h (sim_cia): Delete.
138 2015-04-17 Mike Frysinger <vapier@gentoo.org>
140 * sim-main.h (CIA_GET, CIA_SET): Delete.
142 2015-04-15 Mike Frysinger <vapier@gentoo.org>
144 * Makefile.in (SIM_OBJS): Delete sim-cpu.o.
145 * sim-main.h (STATE_CPU): Delete.
147 2015-04-13 Mike Frysinger <vapier@gentoo.org>
149 * configure: Regenerate.
151 2015-04-13 Mike Frysinger <vapier@gentoo.org>
153 * Makefile.in (SIM_OBJS): Add sim-cpu.o.
154 * interp.c (v850_pc_get, v850_pc_set): New functions.
155 (sim_open): Declare new local var i. Call sim_cpu_alloc_all.
156 Call CPU_PC_FETCH & CPU_PC_STORE for all cpus.
157 (sim_pc_get): Delete.
158 * sim-main.h (SIM_CPU): Define.
159 (struct sim_state): Change cpu to an array of pointers.
162 2015-04-06 Mike Frysinger <vapier@gentoo.org>
164 * Makefile.in (SIM_OBJS): Delete sim-engine.o and sim-hrw.o.
166 2015-03-31 Mike Frysinger <vapier@gentoo.org>
168 * config.in, configure: Regenerate.
170 2015-03-24 Mike Frysinger <vapier@gentoo.org>
172 * interp.c (sim_pc_get): New function.
174 2015-03-16 Mike Frysinger <vapier@gentoo.org>
176 * config.in, configure: Regenerate.
178 2015-03-14 Mike Frysinger <vapier@gentoo.org>
180 * Makefile.in (SIM_RUN_OBJS): Delete.
182 2015-03-14 Mike Frysinger <vapier@gentoo.org>
184 * configure.ac (AC_CHECK_HEADERS): Delete unistd.h & stdlib.h &
185 string.h & strings.h & time.h.
186 * aclocal.m4, configure: Regenerate.
188 2015-02-27 Nick Clifton <nickc@redhat.com>
190 * sim-main.h (reg64_t): New type.
191 (v850_regs): Add selID_sregs field.
192 (VR, SAT16, SAT32, ABS16, ABS32 ): New macros.
193 * v850-dc: Add fields for v850e3v5 instructions.
194 * v850.igen (cvtf.dl): Use correctly signed local value.
195 (cvtf.dw, cvtf.sw, trncf.dul, trncf.dl, trncf.sul, trncf.sw):
197 * interp.c: Fix old style function declarations.
198 * simops.c: Likewise.
200 2015-02-24 Nick Clifton <nickc@redhat.com>
202 * v850.igen: Add more e3v5 support.
203 (FMAF.S): New pattern.
204 (FMSF.S): New pattern.
205 (FNMAF.S): New pattern.
206 (FNMSF.S): New pattern.
207 (cnvq15q30): New pattern.
208 (cnvq30q15): New pattern.
209 (cnvq31q62): New pattern.
210 (cnvq62q31): New pattern.
211 (dup.h): New pattern.
212 (dup.w): New pattern.
213 (expq31): New pattern.
214 (modadd): New pattern.
215 (mov.dw): New pattern.
216 (mov.h): New pattern.
217 (mov.w): New pattern.
218 (pki16i32): New pattern.
219 (pki16ui8): New pattern.
220 (pki32i16): New pattern.
221 (pki64i32): New pattern.
222 (pkq15q31): New pattern.
223 (pkq30q31): New pattern.
224 (pkq31q15): New pattern.
225 (pkui8i16): New pattern.
226 (vabs.h): New pattern.
227 (vabs.w): New pattern.
228 (vadd.dw): New placeholder pattern.
229 (vadd.h): New placeholder pattern.
230 (vadd.w): New placeholder pattern.
231 (vadds.h): New placeholder pattern.
232 (vadds.w): New placeholder pattern.
233 (vaddsat.h): New placeholder pattern.
234 (vaddsat.w): New placeholder pattern.
236 (vbiq.h): New placeholder pattern.
237 (vbswap.dw): New placeholder pattern.
238 (vbswap.h): New placeholder pattern.
239 (vbswap.w): New placeholder pattern.
240 (vcalc.h): New placeholder pattern.
241 (vcalc.w): New placeholder pattern.
242 (vcmov): New placeholder pattern.
244 2014-08-19 Alan Modra <amodra@gmail.com>
246 * configure: Regenerate.
248 2014-08-15 Roland McGrath <mcgrathr@google.com>
250 * configure: Regenerate.
251 * config.in: Regenerate.
253 2014-03-04 Mike Frysinger <vapier@gentoo.org>
255 * configure: Regenerate.
257 2013-09-23 Alan Modra <amodra@gmail.com>
259 * configure: Regenerate.
261 2013-06-03 Mike Frysinger <vapier@gentoo.org>
263 * aclocal.m4, configure: Regenerate.
265 2013-05-13 Nick Clifton <nickc@redhat.com>
267 * v850.igen (LDSR): Accept but ignore a selID parameter.
269 2013-05-10 Freddie Chopin <freddie_chopin@op.pl>
271 * configure: Rebuild.
273 2013-01-28 Nick Clifton <nickc@redhat.com>
275 * simops.c (v850_rotl): New function.
276 (v850_bins): New function.
277 * simops.h: Add prototypes fir v850_rotl and v850_bins.
278 * v850-dc: Add entries for V850e3v5.
279 * v850.igen: Add support for v850e3v5.
280 (ld.dw, st.dw, rotl, bins): New patterns.
282 2013-01-10 Nick Clifton <nickc@redhat.com>
284 * interp.c (sim_open): Add support for bfd_arch_v850_rh850
285 architecture type. Add support for bfd_mach_v850e2 and
286 bfd_mach_v850e2v3 machine numbers.
287 * v850.igen (dbtrap): Add support for SIM_OPEN_DEBUG.
288 (cmpf.d): Correct order of operands.
290 (trncf.dul): New pattern.
291 (trncf.duw): New pattern.
292 (trncf.sul): New pattern.
293 (trncf.suw): New pattern.
294 * v850-dc: Correct bitfield selection for TRNCF.SW and CVTF.SW.
296 2012-09-13 Nick Clifton <nickc@redhat.com>
298 * v850.igen (W,WWWW): Correct computation of register number.
299 (JR32): Remove unnecessary comma.
300 (cmovf.s): Register 0 is an invalid source register.
301 (maddf.s): Remove bogus intermediary rounding.
302 (nmaddf.s): Likewise.
303 (trncf.sl): Remove bogus initial rounding.
304 (trncf.dw): Likewise.
305 (trncf.sl): Likewise.
306 (trncf.sw): Likewise.
308 2012-06-15 Joel Brobecker <brobecker@adacore.com>
310 * config.in, configure: Regenerate.
312 2012-03-28 Rathish C <rathish.c@kpitcummins.com>
314 * sim-main.h (struct _v850_regs): Add new fields mpu0_sregs,
315 mpu1_sregs, and fpu_sregs.
316 (MPU0_SR, MPU1_SR, FPU_SR): New macros for accessing new fields
317 in _v850_regs struct.
319 (SP): Redefine using SP_REGNO.
320 (PSW_REGNO, EIIC, FEIC, DBIC, DIR, EIWR, FEWR, DBWR, BSEL, PSW_NPV)
321 (PSW_DMP, PSW_IMP, ECR_EICC, ECR_FECC, FPSR, FPSR_REGNO, FPEPC)
322 (FPST, FPST_REGNO, FPCC, FPCFG, FPCFG_REGNO, FPSR_DEM, FPSR_SEM)
323 (FPSR_RM, FPSR_RN, FPSR_FS, FPSR_PR, FPSR_XC, FPSR_XCE, FPSR_XCV)
324 (FPSR_XCZ, FPSR_XCO, FPSR_XCU, FPSR_XCI, FPSR_XE, FPSR_XEV)
325 (FPSR_XEZ, FPSR_XEO, FPSR_XEU, FPSR_XEI, FPSR_XP, FPSR_XPV)
326 (FPSR_XPZ, FPSR_XPO, FPSR_XPU, FPSR_XPI, FPST_PR, FPST_XCE)
327 (FPST_XCV, FPST_XCZ, FPST_XCO, FPST_XCU, FPST_XCI, FPST_XPV)
328 (FPST_XPZ, FPST_XPO, FPST_XPU, FPST_XPI, FPCFG_RM, FPCFG_XEV)
329 (FPCFG_XEZ, FPCFG_XEO, FPCFG_XEU, FPCFG_XEI, GET_FPCC, CLEAR_FPCC)
330 (SET_FPCC, TEST_FPCC, FPSR_GET_ROUND, MPM, MPC, MPC_REGNO, TID)
331 (PPA, PPM, PPC, DCC, DCV0, DCV1, SPAL, SPAU, IPA0L, IPA0U, IPA1L)
332 (IPA1U, IPA2L, IPA2U, IPA3L, IPA3U, DPA0L, DPA0U, DPA1L, DPA1U)
333 (DPA2L, DPA2U, DPA3L, DPA3U, PPC_PPE, SPAL_SPE, SPAL_SPS, VIP)
334 (VMECR, VMTID, VMADR, VPECR, VPTID, VPADR, VDECR, VDTID, MPM_AUE)
335 (MPM_MPE, VMECR_VMX, VMECR_VMR, VMECR_VMW, VMECR_VMS, VMECR_VMRMW)
336 (VMECR_VMMS, IPA2ADDR, IPA_IPE, IPA_IPX, IPA_IPR, IPE0, IPE1, IPE2)
337 (IPE3, IPX0, IPX1, IPX2, IPX3, IPR0, IPR1, IPR2, IPR3, DPA2ADDR)
338 (DPA_DPE, DPA_DPR, DPA_DPW, DPE0, DPE1, DPE2, DPE3, DPR0, DPR1)
339 (DPR2, DPR3, DPW0, DPW1, DPW2, DPW3, DCC_DCE0, DCC_DCE1, PPA2ADDR)
340 (PPC_PPC, PPC_PPE, PPC_PPM): New macros.
341 (FPU_COMPARE): New enum.
342 (TRACE_FP_INPUT_FPU1, TRACE_FP_INPUT_FPU2, TRACE_FP_INPUT_FPU3)
343 (TRACE_FP_INPUT_BOOL1_FPU2, TRACE_FP_INPUT_WORD2)
344 (TRACE_FP_RESULT_WORD1, TRACE_FP_RESULT_WORD2): New macros.
345 * simops.c (Add32): Update prototype.
346 (update_fpsr): New function.
347 (SignalException): New function.
348 (SignalExceptionFPE): New function.
349 (check_invalid_snan): New function.
350 (v850_float_compare): New function.
351 (v850_div): New function.
352 (v850_divu): New function.
353 (v850_sar): New function.
354 (v850_shl): New function.
355 (v850_shr): New function.
356 (v850_satadd): New function.
357 (v850_satsub): New function.
358 (load_data_mem): New function.
359 (store_data_mem): New function.
360 (mpu_load_mem_test): New function.
361 (mpu_store_mem_test): New function.
362 * simops.h: Add function prototype for above mentioned functions.
363 (check_cvt_fi, check_cvt_if, check_cvt_ff): Define.
364 * v850-dc: Add entry for v850e2 and v850e2v3.
365 * v850.igen: Add support for v850e2 and v850e2v3.
367 2012-03-24 Mike Frysinger <vapier@gentoo.org>
369 * aclocal.m4, config.in, configure: Regenerate.
371 2011-12-03 Mike Frysinger <vapier@gentoo.org>
373 * aclocal.m4: New file.
374 * configure: Regenerate.
376 2011-10-17 Mike Frysinger <vapier@gentoo.org>
378 * configure.ac: Change include to common/acinclude.m4.
380 2011-10-17 Mike Frysinger <vapier@gentoo.org>
382 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
383 call. Replace common.m4 include with SIM_AC_COMMON.
384 * configure: Regenerate.
386 2011-07-05 Mike Frysinger <vapier@gentoo.org>
388 * interp.c (sim_do_command): Delete.
390 2011-03-21 Kevin Buettner <kevinb@redhat.com>
392 * simops (OP_10007E0): Update errno handling as most traps
393 do not invoke the host's functionality directly. Invoke
394 sim_io_stat() instead of stat() for implementing TARGET_SYS_stat.
395 Implement TARGET_SYS_fstat, TARGET_SYS_rename, and TARGET_SYS_unlink.
397 2011-02-14 Mike Frysinger <vapier@gentoo.org>
399 * simops.c (OP_10007E0): Change zfree to free.
401 2011-01-11 Andrew Burgess <aburgess@broadcom.com>
403 * interp.c (sim_store_register): Update return value to
406 2010-03-30 Mike Frysinger <vapier@gentoo.org>
408 * interp.c (interrupt_names): Add const to pointer type.
409 (do_interrupt): Add const to interrupt_name.
411 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
413 * configure: Regenerate.
415 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
417 * config.in: Regenerate.
418 * configure: Likewise.
420 * configure: Regenerate.
422 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
424 * configure: Regenerate to track ../common/common.m4 changes.
427 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
428 Daniel Jacobowitz <dan@codesourcery.com>
429 Joseph Myers <joseph@codesourcery.com>
431 * configure: Regenerate.
433 2008-02-05 DJ Delorie <dj@redhat.com>
435 * simops.c (OP_1C007E0): Compensate for 64 bit hosts.
436 (OP_18007E0): Likewise.
437 (OP_2C007E0): Likewise.
438 (OP_28007E0): Likewise.
439 * v850.igen (divh): Likewise.
441 * simops.c (OP_C0): Correct saturation logic.
447 * simops.c (OP_2A0): If the shift count is zero, clear the
449 (OP_A007E0): Likewise.
451 (OP_C007E0): Likewise.
453 (OP_8007E0): Likewise.
455 * simops.c (OP_2C207E0): Correct PSW flags for special divu
457 (OP_2C007E0): Likewise, for div.
458 (OP_28207E0): Likewise, for divhu.
459 (OP_28007E0): Likewise, for divh. Also, sign-extend the correct
461 * v850.igen (divh): Likewise, for 2-op divh.
463 * v850.igen (bsh): Fix carry logic.
465 2007-02-20 Daniel Jacobowitz <dan@codesourcery.com>
467 * Makefile.in (interp.o): Uncomment and update.
469 2006-12-21 Hans-Peter Nilsson <hp@axis.com>
471 * acconfig.h: Remove.
472 * config.in: Regenerate.
474 2006-06-13 Richard Earnshaw <rearnsha@arm.com>
476 * configure: Regenerated.
478 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
480 * configure: Regenerated.
482 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
484 * configure: Regenerated.
486 2005-03-23 Mark Kettenis <kettenis@gnu.org>
488 * configure: Regenerate.
490 2005-01-14 Andrew Cagney <cagney@gnu.org>
492 * configure.ac: Sinclude aclocal.m4 before common.m4. Add
493 explicit call to AC_CONFIG_HEADER.
494 * configure: Regenerate.
496 2005-01-12 Andrew Cagney <cagney@gnu.org>
498 * configure.ac: Update to use ../common/common.m4.
499 * configure: Re-generate.
501 2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
503 * configure: Regenerated to track ../common/aclocal.m4 changes.
505 2005-01-07 Andrew Cagney <cagney@gnu.org>
507 * configure.ac: Rename configure.in, require autoconf 2.59.
508 * configure: Re-generate.
510 2004-12-08 Hans-Peter Nilsson <hp@axis.com>
512 * configure: Regenerate for ../common/aclocal.m4 update.
514 2004-01-18 Mark Kettenis <kettenis@gnu.org>
516 * simops.c: Include <sys/types.h>.
518 2003-09-05 Andrew Cagney <cagney@redhat.com>
519 Nick Clifton <nickc@redhat.com>
521 * interp.c (sim_open): Accept bfd_mach_v850e1.
522 * v850-dc: Add entry for v850e1.
523 * v850.igen: Add support for v850e1.
524 Add code for DBTRAP and DBRET instructions.
525 (dbtrap): Create a separate v850e1 specific instruction.
526 Only generate a trap if the target is not the v850e1.
527 Otherwise treat it as a special kind of branch.
528 (break): Mark as v850/v850e specific.
530 2003-05-16 Ian Lance Taylor <ian@airs.com>
532 * Makefile.in (SHELL): Make sure this is defined.
533 (tmp-igen): Use $(SHELL) whenever we invoke move-if-change.
535 2003-04-06 Nick Clifton <nickc@redhat.com>
537 * simops.c (OP_40): Delete. Move code to...
538 * v850-igen.c (): ...Here. Sign extend the first operand.
539 * simops.h (OP_40): Remove prototype.
541 2003-02-27 Andrew Cagney <cagney@redhat.com>
543 * interp.c (sim_open, sim_create_inferior): Rename _bfd to bfd.
545 2002-11-30 Andrew Cagney <cagney@redhat.com>
547 * simops.c: Use int, 1, 0 instead of boolean, true and false.
550 2002-09-27 Jim Wilson <wilson@redhat.com>
552 * simops.c (OP_E6077E0): And op1 with 7 after reading register, not
554 (BIT_CHANGE_OP): Likewise.
556 2002-09-26 Jim Wilson <wilson@redhat.com>
558 * simops (OP_10007E0): Don't subtract 4 from PC.
560 2002-09-19 Nick Clifton <nickc@redhat.com>
562 * interp.c (sim_open): Remove reference to v850ea.
563 (sim_create_inferior): Likewise.
565 * v850.igen: Remove all references to v850ea, including v850ea
566 specific instructions.
568 2002-08-29 Nick Clifton <nickc@redhat.com>
570 From 2001-08-23 Catherine Moore <clm@redhat.com>
572 * Makefile.in: Add gen-zero-r0 option.
573 * sim-main.h (GPR_SET, GPR_CLEAR): Define.
574 * simops.c (OP_24007E0): Sign extend the imm9
575 operand of a mul instruction.
577 2002-06-17 Andrew Cagney <cagney@redhat.com>
579 * simops.c (trace_result): Fix printf formatting.
581 2002-06-16 Andrew Cagney <ac131313@redhat.com>
583 * configure: Regenerated to track ../common/aclocal.m4 changes.
585 2001-12-02 Andrew Cagney <ac131313@redhat.com>
587 * Makefile.in (simops.h, table.c): Delete targets.
588 (tmp-gencode, gencode.o, gencode): Delete targets.
589 (simops.h): New file.
590 ($(BUILT_SRC_FROM_IGEN)): Do not depend on simops.h.
591 * gencode.c: Delete file.
593 2001-04-15 J.T. Conklin <jtc@redback.com>
595 * Makefile.in (simops.o): Add simops.h to dependency list.
597 2001-03-14 Andrew Cagney <ac131313@redhat.com>
599 * Makefile.in (gencode): Link with libintl.
601 2001-01-31 Jonathan Larmour <jlarmour@redhat.com>
603 * Makefile.in (gencode): Link with libopcodes in build tree rather
604 than building source files from there.
606 2000-05-30 Nick Clifton <nickc@cygnus.com>
608 * v850.igen: Remove illegal instruction pattern, since it is the
609 same as the breakpoint pattern.
611 Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
613 * configure: Regenerated to track ../common/aclocal.m4 changes.
615 2000-04-14 Gary Thomas <gthomas@redhat.com>
617 * v850.igen: Define 'br *' as illegal since this is the only
618 way to provide a breakpoint on some v850 family processors.
620 2000-03-24 Frank Ch. Eigler <fche@redhat.com>
622 * v850.igen (ilgop): New insn pattern for four-byte breakpoints.
624 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
626 * configure: Regenerated to track ../common/aclocal.m4 changes.
628 1999-05-08 Felix Lee <flee@cygnus.com>
630 * configure: Regenerated to track ../common/aclocal.m4 changes.
632 Tue Dec 1 17:25:16 1998 Andrew Cagney <cagney@b1.cygnus.com>
634 * Makefile.in (NL_TARGET): Define as -DNL_TARGET_v850.
636 Wed Nov 25 17:52:58 1998 Andrew Cagney <cagney@b1.cygnus.com>
638 * Makefile.in (simops.o): Depends on targ-vals.h
639 * simops.c: Include targ-vals.h instead of
640 libgloss/.../syscall.h. Replace SYS_* with TARGET_SYS_*.
641 (divn, divun, OP_1C007E0, OP_18207E0, OP_1C207E0,OP_18007E0):
642 Replace signed long int with signed32.
644 Fri Oct 9 18:02:25 1998 Doug Evans <devans@canuck.cygnus.com>
646 * interp.c: #include "itable.h".
647 (get_insn_name): New function.
648 (sim_open): Initialize CPU_INSN_NAME,CPU_MAX_INSNS.
649 * sim-main.h (MAX_INSNS,INSN_NAME): Delete.
651 Wed May 6 19:43:27 1998 Doug Evans <devans@canuck.cygnus.com>
653 * sim-main.h (INSN_NAME): New arg `cpu'.
655 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
657 * configure: Regenerated to track ../common/aclocal.m4 changes.
659 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
661 * configure: Regenerated to track ../common/aclocal.m4 changes.
664 Sun Apr 26 15:19:14 1998 Tom Tromey <tromey@cygnus.com>
666 * acconfig.h: New file.
667 * configure.in: Reverted change of Apr 24; use sinclude again.
669 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
671 * configure: Regenerated to track ../common/aclocal.m4 changes.
674 Fri Apr 24 11:18:08 1998 Tom Tromey <tromey@cygnus.com>
676 * configure.in: Don't call sinclude.
678 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
680 * configure: Regenerated to track ../common/aclocal.m4 changes.
681 * sim-main.h (SIM_MAIN_H): Wrap header.
683 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
685 * configure: Regenerated to track ../common/aclocal.m4 changes.
687 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
689 * configure: Regenerated to track ../common/aclocal.m4 changes.
691 Tue Mar 10 15:54:50 1998 Andrew Cagney <cagney@b1.cygnus.com>
693 * interp.c (sim_stop): Delete, second attempt.
695 Thu Feb 26 19:09:47 1998 Andrew Cagney <cagney@b1.cygnus.com>
697 * interp.c (sim_info): Delete.
699 Wed Feb 18 10:47:32 1998 Andrew Cagney <cagney@b1.cygnus.com>
701 * sim-main.h (TRACE_ALU_INPUT*): Delete. Moved to sim-trace.[hc].
703 * simops.c (trace_result): Call trace_generic instead of
705 (trace_module): Change variable type to integer.
706 (trace_input): Initialize trace_module with TRACE_ALU_IDX.
708 * sim-main.h (trace_module): Change variable decl to integer type.
709 (TRACE_BRANCH*, TRACE_LD, TRACE_ST): Update.
711 Tue Feb 17 12:51:18 1998 Andrew Cagney <cagney@b1.cygnus.com>
713 * interp.c (sim_store_register, sim_fetch_register): Pass in
714 length parameter. Return -1.
716 Tue Feb 3 16:24:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
718 * sim-main.h (IMEM16, IMEM16_IMMED): Rename IMEM and
719 IMEM_IMMED. To match recent igen change.
721 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
723 * configure: Regenerated to track ../common/aclocal.m4 changes.
725 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
727 * configure: Regenerated to track ../common/aclocal.m4 changes.
729 Fri Jan 30 09:51:27 1998 Andrew Cagney <cagney@b1.cygnus.com>
731 * sim-main.h (CPU_CIA): Delete, replaced by.
732 (CIA_SET, CIA_SET): Define.
734 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
736 * configure: Regenerated to track ../common/aclocal.m4 changes.
738 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
740 * configure: Regenerated to track ../common/aclocal.m4 changes.
743 Fri Dec 5 09:26:08 1997 Nick Clifton <nickc@cygnus.com>
745 * v850.igen: Revert break value back to its old value.
747 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
749 * configure: Regenerated to track ../common/aclocal.m4 changes.
751 Wed Dec 3 17:27:19 1997 Nick Clifton <nickc@cygnus.com>
753 * v850.igen: Make break have a zero first field, since otherwise
754 it clashes with the DIVH instruction.
756 Sat Nov 22 21:32:07 1997 Andrew Cagney <cagney@b1.cygnus.com>
758 * simops.c (OP_10007E0): Rename SIGABRT -> SIM_SIGABRT. Give
759 sim_stopped instead of sim_signalled.
761 * v850.igen (BREAK), simops.c (OP_12007E0): Rename SIGTRAP to
763 (illegal): Rename SIGILL to SIM_SIGILL.
765 * sim-main.h, simops.c, interp.c: Do not include signal.h.
767 * sim-main.h: Include sim-signal.h instead of signal.h.
768 (SIGTRAP, SIGQUIT): Delete definition.
769 (SIG_V850_EXIT): Delete definition.
771 Tue Nov 18 15:33:48 1997 Doug Evans <devans@canuck.cygnus.com>
773 * Makefile.in (SIM_OBJS): Use $(SIM_NEW_COMMON_OBJS).
775 Fri Oct 31 10:33:40 1997 Andrew Cagney <cagney@b1.cygnus.com>
777 * interp.c (sim_open): Check state magic number.
778 (sim-assert.h): Include.
780 Tue Oct 28 11:06:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
782 * v850.igen: Add model filter field to records.
784 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
786 * configure: Regenerated to track ../common/aclocal.m4 changes.
788 Fri Sep 26 11:56:02 1997 Felix Lee <flee@cygnus.com>
790 * sim-main.h: delete null override of SIM_ENGINE_HALT_HOOK and
791 SIM_ENGINE_RESTART_HOOK.
793 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
795 * configure: Regenerated to track ../common/aclocal.m4 changes.
797 Wed Sep 24 17:28:26 1997 Andrew Cagney <cagney@b1.cygnus.com>
799 * sim-main.h (WITH_TARGET_WORD_MSB): Delete.
801 * configure.in (SIM_AC_OPTION_BITSIZE): Specify 32 bit
802 architecture with MSB == 31.
804 Wed Sep 24 14:04:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
806 * v850.igen: Make divh insn with RRRRR==0 breakpoint.
808 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
810 * configure: Regenerated to track ../common/aclocal.m4 changes.
812 Tue Sep 23 10:19:51 1997 Andrew Cagney <cagney@b1.cygnus.com>
814 * Makefile.in (SIM_WARNINGS, SIM_ALIGNMENT, SIM_ENDIAN,
815 SIM_HOSTENDIAN, SIM_RESERVED_BITS): Delete, moved to common.
816 (SIM_EXTRA_CFLAGS): Update.
818 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
820 * configure: Regenerated to track ../common/aclocal.m4 changes.
821 * configure.in: Really specify NONSTRICT_ALIGNMENT as the default.
823 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
825 * configure.in: Specify NONSTRICT_ALIGNMENT as the default.
826 * configure: Regenerated to track ../common/aclocal.m4 changes.
828 Fri Sep 19 10:37:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
830 * v850.igen (disp16): Use EXTEND16 to sign extend disp.
831 (disp22): Only shift left by 1, not 2.
832 ("jmp"): Ensure PC is 2 byte aligned.
834 * simops.c, v850.igen: Move "Bcond", "jr", "jarl" code to
835 v850.igen. Fix tracing.
837 * simops.c (OP_300, OP_400, OP_500): Move "sdl.b", "sld.h",
838 "sld.w" insns to v850.igen. Fix tracing.
839 (OP_70): Ditto for "sld.hu".
841 * v850.igen: Clarify tracing of "sld.b", "sld.h" et.al.
843 * simops.c (condition_met): Make global.
845 * sim-main.h (TRACE_ALU_INPUT3, TRACE_BRANCH0, TRACE_LD,
847 (TRACE_LD_NAME): Define.
849 * simops.c: Move "cmov", "cmov imm" to v850.igen, fix.
851 Wed Sep 17 16:21:08 1997 Andrew Cagney <cagney@b1.cygnus.com>
853 * simops.c: Move "mov", "reti", to v850.igen, fix tracing.
855 * interp.c (hash): Delete.
857 * v850.igen (nop): Really do nothing.
859 * interp.c (do_interrupt): Mask interrupts after PSW is saved, not
861 * v850.igen (reti): Return to current PC not previous.
863 Wed Sep 17 14:02:10 1997 Andrew Cagney <cagney@b1.cygnus.com>
865 * simops.c: Move "ctret", "bsw", "hsw" to v850.igen, fix tracing.
866 (trace_module): Global, save component/module name across insn.
868 * simops.c: Move "bsh" to v850.igen, fix.
870 * v850.igen (callt): Load correct number of bytes. Fix tracing.
871 (stsr, ldsr): Correct src, dest fields. Fix tracing.
872 (ctret): Force alignment. Fix tracing.
874 Tue Sep 16 22:14:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
876 * simops.c (trace_output): Add result argument.
877 (trace_result): New function. Simpler version of trace_output,
878 assumes trace needed.
879 (trace_output): Call trace_result.
880 (trace_output): For IMM_REG_REG, trace correct register.
881 (trace_input): Add case for 16bit immediates.
882 (OP_600, OP_640, OP_680, OP_6C0, OP_6A0): Use.
884 * sim-main.h (TRACE_ALU_INPUT, TRACE_ALU_RESULT): Define.
885 (trace_values, trace_name, trace_pc, trace_num_values): Make
889 v850.insn (movea, stsr): Use.
890 (sxb, sxh, zxb, zxh): Ditto.
892 Tue Sep 16 21:14:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
894 * simops.c: Move "movea" from here.
895 * v850.igen: To here.
897 * v850.igen (simm16): Define, sign extend imm16.
898 (uimm16): Define, no sign extension.
899 (addi, andi, movea, movhi, mulhi, ori, satsubi, xori): Use.
901 * simops.c: Move "sxh", "switch", "sxb", "callt", "dispose",
903 * v850.igen: To here.
904 (switch): Fix off by two error in NIA calc.
906 Tue Sep 16 15:14:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
908 * simops.c (trace_pc, trace_name, trace_values, trace_num_values):
910 (trace_input): Just save pc, name and values for trace_output.
911 (trace_output): Write trace values to a buffer. Use
912 trace_one_insn to print trace info and buffer.
913 (SIZE_OPERANDS, SIZE_LOCATION): Delete.
915 Tue Sep 16 09:02:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
917 * sim-main.h (struct _sim_cpu): Add psw_mask so that reserved bits
920 * simops.c (OP_2007E0, OP_4007E0): Move "ldsr", "stsr"
921 instructions from here.
922 * v850.igen (ldsr, stsr): To here. Mask out reserved bits when
925 * interp.c (sim_open): Set psw_mask if machine known.
927 Tue Sep 16 10:20:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
929 * v850-dc: Add rule to diferentiate between breakpoint and divh.
930 * v850.igen (break): New instruction, breakpoint simulator.
931 * v850.igen (breakpoint): Enable. Change to a 32bit instruction.
933 Mon Sep 15 18:44:05 1997 Jim Wilson <wilson@cygnus.com>
935 * simops.c (Multiply64): Don't store into register zero.
937 Tue Sep 16 09:02:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
939 * Makefile.in (semantics.o): Add dependency.
941 * sim-main.h (SAVE_1, SAVE_2): Perform backward compatible save,
942 do not adjust CIA/NIA.
944 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
946 * simops.c (OP_300, OP_400, OP_70): Make behavour depend on PSW[US].
948 * simops.c: Move "divun", "sld.bu", "divhn", "divhun", "divn",
949 "divun", "pushml" code from here to v850.igen.
950 (divun): Make global.
951 (type3_regs): Make global
953 * v850.igen: Move simops.c code to here.
955 * interp.c (sim_create_inferior): For v850eq set US bit by
958 * interp.c (sim_open): Don't set arch, now set by
961 * configure: Regenerated to track ../common/aclocal.m4 changes.
963 Mon Sep 15 14:39:34 1997 Andrew Cagney <cagney@b1.cygnus.com>
965 * simops.c (op_types): Move from here.
968 * sim-main.h (trace_input, trace_output), simops.c: Make global.
970 * simops.c (OP_60): Move "jmp" code from here.
971 * v850.igen (jmp): To here.
973 * simops.c (OP_60): Move "sld.bu" code from here.
974 * v850.igen (sld.bu): To here.
976 Fri Sep 12 15:11:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
978 * v850.igen (prepare, ...): Add to v850eq architecture.
980 * interp.c (sim_open): Default to v850eq.
982 * interp.c (sim_open): Default to v850e.
983 * sim-main.h (signal.h): Include.
985 * v850.igen (illegal): Report/halt illegal instructions.
987 * Makefile.in (SIM_EXTRA_CFLAGS): Add SIM_RESERVED_BITS.
989 * configure.in: Add reserved bits option.
990 * configure: Regenerate.
992 Thu Sep 11 08:40:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
994 * interp.c (sim_open): Use sim_do_commandf instead of asprintf.
996 * sim-main.h (INSN_NAME):
998 * Makefile.in (INCLUDE): Add SIM_EXTRA_DEPS.
999 (SIM_EXTRA_DEPS): Add itable.h
1000 (tmp-gencode): Does not depend on simops.h
1002 * sim-main.h (itable.h): Include.
1003 (MAX_INSNS, INSN_NAME): Define.
1005 * interp.c: Compute inttype from the interrupt_names index that
1008 Wed Sep 10 10:25:40 1997 Andrew Cagney <cagney@b1.cygnus.com>
1010 * simops.c (trace_input): Use trace_printf instead of
1012 (trace_output): Ditto.
1013 (trace_input): Only trace when TRACE_ALU_P. Delete code
1014 disasembling instruction.
1015 (trace_output): Only trace when TRACE_ALU_P.
1017 Tue Sep 9 01:29:50 1997 Andrew Cagney <cagney@b1.cygnus.com>
1019 * simops.c (trace_input, trace_output): Use sim_io_printf.
1020 (OP_620): Pass correct argument to trace.
1022 (trace_input): Obtain prog_bfd, text_start et.al from simulator
1025 Mon Sep 8 21:03:52 1997 Andrew Cagney <cagney@b1.cygnus.com>
1027 * v850.igen: New file.
1028 * v850-dc: New file.
1030 Mon Sep 8 18:33:04 1997 Andrew Cagney <cagney@b1.cygnus.com>
1033 * sim-main.h (SEXT16): Delete, use EXTEND16.
1034 (SEXT8): Delete, use EXTEND8.
1035 (SEXT32): Delete, used?
1036 (SEXT40, SEXT44, SEXT64): Use UNSIGNED64 for constants, not ...LL.
1037 (WITH_TARGET_WORD_MSB): Define as 31. v850 little bit endian.
1039 * simops.c: Use EXTEND15 from sim-bits instead of SEXT16.
1041 * sim-main.h (DEBUG_TRACE, DEBUG_VALUES, v850_debug): Delete,
1042 replace with TRACE_INSN_P and TRACE_ALU_P.
1044 * simops.c (trace_input, trace_output): Update.
1046 * interp.c (sim_engine_run): Delete.
1047 (lookup_hash): Delete.
1048 (sim_open): Do not fill hash table.
1049 (sim_trace): Delete.
1051 Fri Sep 5 17:04:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1053 * simops.c (OP_FFFF): Use sim_engine_halt.
1054 (OP_12007E0): Ditto.
1055 (OP_10007E0): Ditto.
1057 * sim-main.h (struct sim_cpu): Delete member exception. Using
1060 * interp.c (sim_info): Do not do anything in sim-info.
1061 (sim_stop): Delete, replace with sim-stop.
1062 (sim_stop_reason): Delete, replace with sim-reason.
1064 * sim-main.h (WITH_WATCHPOINTS): Define.
1065 (WITH_MODULO_MEMORY): Define
1067 * Makefile.in (SIM_OBJS): Add sim-resume, sim-watch, sim-stop,
1070 * interp.c (enum interrupt_cond_type): Delete.
1071 (struct interrupt_generator): Delete.
1072 (enum interrupt_type): Drop int_none.
1073 (sim_open): Initialize WATCHPOINT module.
1074 (sim_resume, sim_run): Rename sim_resume to sim_run.
1075 (sim_engine_run): Replace interrupt code with call to sim-events.
1076 (sim_set_interrupt): Delete.
1077 (sim_parse_number): Delete.
1079 Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
1081 * configure: Regenerated to track ../common/aclocal.m4 changes.
1083 Thu Sep 4 18:11:37 1997 Andrew Cagney <cagney@b1.cygnus.com>
1085 * simops.c (fetch_argv): New function, fetch a arg vector from
1088 * configure.in: Check for fork, execve, execv.
1089 * configure: Regenerate.
1091 * interp.c (sim_store_register, sim_fetch_register): Use H2T_4 and
1092 T2H_4 for byte swapping.
1094 * sim-main.h, interp.c (get_word, get_half, get_byte, put_word,
1095 put_half, put_byte): Delete.
1097 * Makefile.in (SIM_OBJS): Add sim-memopt.o module.
1099 * sim-main.h (load_mem, store_mem): Redefine as macros.
1100 (IMEM, IMEM_IMMED): New macros - fetch instructions.
1102 * simops.c (OP_10007E0): For SYS_read, SYS_write, SYS_open
1103 transfer data via a buffer.
1104 (fetch_str): New function, fetch string from memory.
1106 * Makefile.in (SIM_OBJS): Add sim-hrw.o module.
1108 * interp.c (sim_open): Establish memory maps using sim-memopt.c
1110 (sim_do_command): Print error if memory-map command is used. Call
1112 (map): Delete, replaced by sim-core.
1113 (sim_memory_init): Delete, replaced by sim-core.
1114 (sim_set_memory_map): Delete, replaced by sim-memopt.
1115 (load_mem): Delete, replaced by sim-core.
1116 (store_mem): Delete, replaced by sim-core.
1117 (sim_write): Delete, replaced by sim-hrw.
1118 (sim_read): Delete, replaced by sim-hrw.
1120 * sim-main.h (struct sim_state): Remove memory members, using
1123 Wed Sep 3 10:18:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1125 * sim-main.h: Replace SIM_HAVE_FLATMEM with mem ptr.
1126 * interp.c (map): Do not add to a void pointer.
1128 * Makefile.in (INCLUDE): Add sim-main.h
1130 * configure.in: Check for time.h
1131 * configure: Re-generate.
1133 * interp.c (struct interrupt_generator): Make time unsigned long,
1135 (sim_resume): Make oldpc SIM_ADDR.
1136 (struct hash_entry): Make mask/opcode unsigned.
1138 * v850_sim.h (struct simops ): Make opcode and mask unsigned.
1140 * simops.c (utime.h): Include if available.
1141 (OP_10007E0): Check for UTIME function.
1142 (divun): Put parentheses around shift argument.
1143 (OP_640): Put parentheses around shift argument, was wrong.
1144 (OP_107F0): Return something.
1146 * interp.c (sim_parse_number): Use strtoul not strtol.
1147 (sim_resume): Use sim_elapsed_time_get to keep track of the time.
1149 * configure.in (SIM_AC_OPTION_WARNINGS): Add.
1150 (SIM_AC_OPTION_ENDIAN): Set to hardwired big.
1151 (SIM_AC_OPTION_HOST_ENDIAN): Add.
1152 (AC_CHECK_FUNCS): Add utime.
1153 (AC_CHECK_HEADERS): Add stdlib.h, string.h, strings.h, utime.h
1154 configure: Regenerate.
1157 * Makefile.in (SIM_RUN_OBJS): Use nrun.o.
1158 (SIM_OBJS): Add sim-io.o, sim-hload.o, sim-utils.o, sim-options.o,
1159 sim-config.o, sim-module.o, sim-events.o, sim-core.o,
1160 sim-endian.o, sim-engine.o, sim-trace.o, sim-profile.o
1161 (SIM_ENDIAN, SIM_WARNGINS): Define.
1163 * simops.c (OP_10007E0): Use sim_io_* for transfers.
1165 * interp.c (sim_resume): Pass sd around.
1167 * simops.c (sim-main.h): Include.
1169 * gencode.c (write_template): Generate #include sim-main.h.
1170 (write_opcodes): Ditto.
1172 * interp.c (prog_bfd, prog_bfd_was_opened_p): Delete.
1173 (v850_callback): Ditto.
1174 (sim_kind, myname): Ditto.
1175 (lookup_hash): Pass SD. Use sim_io_error.
1176 (sim_set_memory_map): Pass in SD, use.
1177 (init_system): Pass in SD, use.
1179 (sim_set_profile): Delete.
1180 (sim_set_profile_size): Delete.
1181 (do_interrupt): Pass in SD, use.
1182 (sim_info): Use sim_io_printf.
1183 (sim_create_inferior): Reset registers. Set PC from prog_bfd
1185 (sim_load): Delete, use common/sim-hload.c
1186 (sim_size): Rename to sim_memory_init.
1187 (sim_write): Remove call to init_system.
1188 (init_system): Delete.
1189 (sim_set_callbacks): Delete.
1190 (sim_set_interrupt): Pass in SD, use.
1191 (start_time): Delete.
1193 * v850_sim.h: Remove everything except `struct simops' from here.
1194 * sim-main.h: Move most to here.
1195 * gencode.c: Move #includes to here.
1197 * sim-main.h(struct _sim_cpu): Rename struct _state.
1198 (#define PC, et.al.): Update
1199 (v850_callback): Delete. Replaced with SIM_DESC arg.
1200 (int8, uint8, int16, uint16, int32, uint32): Define types using
1201 unsigned8 et.al from common/sim-types.h.
1202 * sim-main.h (State): Define as STATE_CPU.
1204 Mon Sep 1 12:07:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1206 * configure.in: Check for time, chmod.
1207 * configure: Regenerate.
1208 * simops.c (SYS_time, SYS_chmod): Use HAVE_TIME, HAVE_CHMOD.
1210 * simops.c (../../libgloss/v850/sys/syscall.h): Include instead of
1212 (OP_10007E0): Check the existance each SYS_* macro independantly.
1214 * v850_sim.h (SIGQUIT, SIGTRAP): Only define if missing.
1216 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
1218 * configure: Regenerated to track ../common/aclocal.m4 changes.
1221 Tue Aug 26 10:42:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
1223 * interp.c (sim_kill): Delete.
1224 (sim_create_inferior): Add ABFD argument.
1225 (sim_load): Move setting of PC from here.
1226 (sim_create_inferior): To here.
1228 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
1230 * configure: Regenerated to track ../common/aclocal.m4 changes.
1233 Mon Aug 25 11:31:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
1235 * interp.c (sim_open): Add ABFD argument.
1237 Fri Aug 22 10:39:28 1997 Nick Clifton <nickc@cygnus.com>
1239 * simops.c (bsh): Only set CY flag if either of the bottom
1242 * simops.c (prepare, dispose): Lower numbered
1243 registers go to higher numbered address.
1245 * simops.c (unsigned divide instructions): S bit set if result has
1248 * simops.c (pushml, pushmh, popml, popmh): Lower numbered
1249 registers go to higher numbered address.
1251 Wed Aug 20 13:56:35 1997 Nick Clifton <nickc@cygnus.com>
1253 * simops.c (OP_107E0, OP_107F0, OP_307E0, OP_307F0): Use correct
1254 interpretation of SR bit in list18 structure.
1255 (divn, divun): New functions to perform N step divide functions.
1257 Mon Aug 18 10:59:02 1997 Nick Clifton <nickc@cygnus.com>
1259 * simops.c (OP_300, OP_400, OP_60, OP_70): Support variant opcodes
1260 with US bit set in the PSW.
1262 Wed Aug 13 19:06:55 1997 Nick Clifton <nickc@cygnus.com>
1264 * interp.c (sim_resume): Opcode functions return amount to be
1265 added to PC and all opcodes take a standard format in the OP[]
1268 (do_format_*): Functions removed.
1270 * v850_sim.h (SP, EP): New register mnemonics.
1272 * gencode.c (write_header): Functions prototypes return an
1275 * simops.c: Opcode functions return amount to be added to PC.
1277 * v850_sim.h (CTPC, CTPSW, CTBP): New register mnemonics.
1279 * simops.c: Add support for v850e instructions.
1281 * simops.c: Add support for v850eq instructions.
1283 Tue May 20 10:24:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1285 * interp.c (sim_open): Add callback argument.
1286 (sim_set_callbacks): Delete SIM_DESC argument.
1288 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
1290 * configure: Regenerated to track ../common/aclocal.m4 changes.
1292 Wed Apr 23 17:20:16 1997 Doug Evans <dje@canuck.cygnus.com>
1294 * interp.c (prog_bfd_was_opened_p): New static local.
1295 (prog_bfd): New global variable.
1296 (sim_open): Undo patch to add -E support.
1297 (sim_close): Close prog_bfd if sim_load opened it.
1298 (sim_load): Record bfd of loaded file in prog_bfd.
1299 * simops.c (prog_bfd): Renamed from exec_bfd.
1301 Fri Apr 18 14:17:12 1997 Andrew Cagney <cagney@b1.cygnus.com>
1303 * interp.c (sim_stop): Stub function.
1305 Thu Apr 17 03:53:18 1997 Doug Evans <dje@canuck.cygnus.com>
1307 * Makefile.in (SIM_OBJS): Add sim-load.o.
1308 * interp.c (sim_kind, myname): New static locals.
1309 (sim_open): Set sim_kind, myname. Ignore -E arg.
1310 (sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to
1311 load file into simulator. Set start address from bfd.
1312 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
1314 Wed Apr 16 19:53:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1316 * simops.c (OP_10007E0): Only provide system calls SYS_execv,
1317 SYS_wait, SYS_wait, SYS_utime, SYS_time if defined by the host.
1319 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1321 * configure: Regenerated to track ../common/aclocal.m4 changes.
1324 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
1326 * interp.c (sim_open): New arg `kind'.
1328 * configure: Regenerated to track ../common/aclocal.m4 changes.
1330 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1332 * configure: Regenerated to track ../common/aclocal.m4 changes.
1334 Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1336 * configure: Regenerated to track ../common/aclocal.m4 changes.
1338 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1340 * configure: Re-generate.
1342 Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
1344 * configure: Regenerate to track ../common/aclocal.m4 changes.
1346 Thu Mar 13 13:00:54 1997 Doug Evans <dje@canuck.cygnus.com>
1348 * interp.c (sim_open): New SIM_DESC result. Argument is now
1350 (other sim_*): New SIM_DESC argument.
1352 Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com>
1354 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
1355 COMMON_{PRE,POST}_CONFIG_FRAG instead.
1356 * configure.in: sinclude ../common/aclocal.m4.
1357 * configure: Regenerated.
1359 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
1361 * configure configure.in Makefile.in: Update to new configure
1362 scheme which is more compatible with WinGDB builds.
1363 * configure.in: Improve comment on how to run autoconf.
1364 * configure: Re-run autoconf to get new ../common/aclocal.m4.
1365 * Makefile.in: Use autoconf substitution to install common
1368 Mon Jan 20 16:05:34 1997 Michael Meissner <meissner@tiktok.cygnus.com>
1370 * simops.c (OP_{E0,2E0,6E0}): The multiply operations sign extend,
1373 Tue Jan 14 17:06:03 1997 Stu Grossman (grossman@critters.cygnus.com)
1375 * simops.c: Put ifdefs around things to make MSVC happy. Get rid
1376 of unistd.h. Disable SYS_stat, SYS_chown, SYS_time, SYS_times,
1377 SYS_gettimeofday and SYS_utime from MSVC.
1379 Tue Dec 31 18:11:13 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1381 * simops.c (OP_10007E0): Know that kill encodes the signal number
1382 via: 0xdead0000 | signal and turn it back into a signal.
1384 Fri Dec 27 14:44:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1386 * v850_sim.h (SIG_V850_EXIT): Define as -1.
1388 * interp.c (sim_open): Cast calloc function.
1389 (sim_stop_reason): If signal is SIG_V850_EXIT, inform gdb the
1390 program exited with the appropriate exit code.
1391 (sim_set_interrupt): Declare buildargv.
1393 * simops.c (OP_10007E0): Make exit signal normal exit. Make time
1394 type correct and work on big endian systems.
1396 Wed Nov 20 02:18:44 1996 Doug Evans <dje@canuck.cygnus.com>
1398 * Makefile.in: Delete stuff moved to ../common/Make-common.in.
1399 (SIM_OBJS,SIM_EXTRA_CFLAGS,SIM_EXTRA_CLEAN): Define.
1400 * configure.in: Simplify using macros in ../common/aclocal.m4.
1401 Call AC_CHECK_HEADERS(unistd.h).
1402 * configure: Regenerated.
1403 * config.in: New file.
1404 * simops.c: #include "config.h". #include <unistd.h> if present.
1406 Sun Nov 3 23:02:54 1996 Stan Shebs <shebs@andros.cygnus.com>
1408 * v850_sim.h (State): New slots dummy_mem, pending_nmi.
1409 (EIPC, etc): New macros for system registers.
1410 * simops.c, interp.c: Use everywhere.
1412 * interp.c: Add support for interrupts issued by interrupt
1413 generators, either PC- or time-based. Controlled by simulator
1414 command "sim interrupt".
1416 * interp.c: Add support for variable-size allocation of memory,
1417 via simulator command "sim memory-map".
1418 (map): Issue SIGSEGV for references to invalid memory regions.
1420 Thu Oct 31 14:44:10 1996 Gavin Koch <gavin@cygnus.com>
1422 * simops.c: Include <sys/time.h> for struct timeval and
1425 Wed Oct 30 08:49:10 1996 Jeffrey A Law (law@cygnus.com)
1427 * simops.c (OP_10007E0): Handle SYS_times and SYS_gettimeofday.
1429 * simops.c (OP_10007E0): Handle SYS_time.
1431 Tue Oct 29 14:22:55 1996 Jeffrey A Law (law@cygnus.com)
1433 * simops.c: Include <sys/stat.h>.
1434 (OP_10007E0): Handle SYS_stat.
1436 Thu Oct 24 12:26:35 1996 Jeffrey A Law (law@cygnus.com)
1438 * simops.c (OP_10007E0): Don't declare errno.
1440 * simops.c (OP_500): Mask off low bit in displacement
1442 (OP_501): Similarly.
1444 * simops.c (OP_500): Fix displacement handling for sld.w.
1445 (OP_501): Similarly for sst.w.
1447 * simops.c (trace_input): Remove all references to SEXT7.
1448 (OP_300, OP_400, OP_500, OP_380, OP_480, OP_501): Displacement
1449 is zero extended for sst/sld instructions.
1450 * v850_sim.h (SEX7): Delete. It's no longer needed (and it
1451 was incorrect anyway).
1453 Thu Oct 24 10:33:33 1996 Stu Grossman (grossman@critters.cygnus.com)
1455 * Makefile.in: Get rid of srcroot. Set all INSTALL macros via
1457 * gencode.c (write_opcodes): Pad operands field to account for
1459 * simops.c: Include errno.h. Exclude SYS_chown, since MSVC
1460 doesn't support it. (Why is this here in the first place?!?)
1461 * v850_sim.h: Get rid of 64 bit defs. Also, get rid of #elif's.
1462 Change number of operands in struct simops from 9 to 6. Define
1463 SIGTRAP and SIGQUIT for MSVC.
1465 Tue Oct 15 16:19:51 1996 Stu Grossman (grossman@critters.cygnus.com)
1467 * interp.c (MEM_SIZE): It's now bytes, not a power of 2.
1468 * (map): Add support for external mem in the 1->2 meg range.
1469 Also, abort() when memory access is way out of bounds. (Better to
1470 die than to give wrong result. (This will be fixed later.))
1471 * (sim_size): MEM_SIZE is now bytes, not shift factor.
1473 Tue Oct 1 15:53:24 1996 Gavin Koch <gavin@cygnus.com>
1475 * simops.c (trace_input): Swapped order of operands for output
1476 output of OP_IMM_REG. Changed the fetching of the operands for
1477 OP_LOAD32, and OP_STORE32 to work like op-function.
1479 Mon Sep 30 15:46:33 1996 Stu Grossman (grossman@critters.cygnus.com)
1481 * interp.c: Move includes of remote-sim.h and callback.h to
1483 * (lookup_hash): Add PC to report of hash failure.
1484 * (map load_mem store_mem): New memory subsystem. Models V851
1486 * (sim_write sim_read): Use new memory subsystem.
1487 * (sim_resume): Don't load and save PC into EIPC anymore. Needed
1488 to make user-defined traps work right.
1489 * simops.c (OP_*): Use new memory subsystem.
1490 * (OP_14007E0 (reti)): Implement reti.
1491 * (OP_14996E0 (trap)): Implement user-defined traps. Move I/O to
1492 trap 31. Use new memory subsystem.
1493 * v850_sim.h: Prototypes for load_mem, store_mem and map. Use
1494 load_mem in RLW macro.
1496 Fri Sep 27 18:34:09 1996 Stu Grossman (grossman@critters.cygnus.com)
1498 * gencode.c (write_opcodes): Output hex values for opcode mask
1500 * interp.c (sim_resume): Save and restore PC from the appropriate
1502 * (sim_fetch_register sim_store_register): Fix byte-order problem
1503 with reading and writing registers.
1504 * simops.c (OP_FFFF): Implement pseudo-breakpoint insn.
1506 Fri Sep 27 17:42:37 1996 Jeffrey A Law (law@cygnus.com)
1508 * simops.c (trace_input): Fix thinko.
1510 Wed Sep 18 09:54:12 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1512 * simops.c (exec_bfd): Rename from sim_bfd.
1513 (trace_input): Ditto.
1515 Thu Sep 12 12:03:05 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1517 * simops.c (trace_input): Use find_nearest_line to print line
1518 number, function name or file name of PC.
1520 Wed Sep 11 16:44:37 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1522 * simops.c: Add tracing support. Use SEXTxx macros instead of
1523 doing hardwired shifts.
1525 * configure.in (--enable-sim-cflags): Add switch to add additional
1526 flags to simulator buld. If --enable-sim-cflags=trace, turn on
1528 * configure: Regenerate.
1530 * Makefile.in: Don't require a VPATH capable make if configuring
1531 in the same directory. Don't use CFLAGS for configuration flags.
1532 Add flags from --enable-sim-cflags. Support canadian cross
1533 builds. Rebuild whole simulator if include files change.
1535 * interp.c (v850_debug): New global for debugging.
1536 (lookup_hash,sim_size,sim_set_profile): Use
1537 printf_filtered callback, instead of calling printf directly.
1538 (sim_{open,trace}): Enable tracing if -t and compiled for tracing.
1540 * v850_sim.h: Use limits.h to set the various sized types.
1541 (SEXT{5,7,16,22}): New macros.
1543 Mon Sep 9 20:50:46 1996 Jeffrey A Law (law@cygnus.com)
1545 * interp.c (hash): Make this an inline function
1546 when compiling with GCC. Simplify.
1547 * simpos.c: Explicitly include "sys/syscall.h". Remove
1548 some #if 0'd code. Enable more emulated syscalls.
1550 Wed Sep 4 01:48:55 1996 Jeffrey A Law (law@cygnus.com)
1552 * interp.c: Fix sign bit handling for add and sub instructions.
1554 Tue Sep 3 10:20:30 1996 Jeffrey A Law (law@cygnus.com)
1556 * gencode.c: Fix various indention & style problems.
1557 Remove test code. Remove #if 0 code.
1558 * interp.c: Provide prototypes for all static functions.
1559 Fix minor indention problems.
1560 (sim_open, sim_resume): Remove unused variables.
1561 (sim_read): Return type is "int".
1562 * simops.c: Remove unused variables.
1563 (divh): Make result of divide-by-zero zero.
1564 (setf): Initialize result to keep compiler quiet.
1565 (sar instructions): These just clear the overflow bit.
1566 * v850_sim.h: Provide prototypes for put_byte, put_half
1569 * interp.c: OP should be an array of 32bit operands!
1570 (v850_callback): Declare.
1571 (do_format_5): Fix extraction of OP[0].
1572 (sim_size): Remove debugging printf.
1573 (sim_set_callbacks): Do something useful.
1574 (sim_stop_reason): Gross hacks to get c-torture running.
1575 * simops.c: Simplify code for computing targets of bCC
1576 insns. Invert 's' bit if 'ov' bit is set for some
1577 instructions. Fix 'cy' bit handling for numerous
1578 instructions. Make the simulator stop when a halt
1579 instruction is encountered. Very crude support for
1580 emulated syscalls (trap 0).
1581 * v850_sim.h: Include "callback.h" and declare
1582 v850_callback. Items in the operand array are 32bits.
1584 Sun Sep 1 22:35:35 1996 Jeffrey A Law (law@cygnus.com)
1586 * interp.c (sim_resume): Fix code to check for a format 3
1588 * simops.c: bCC insns only argument is a constant, not a
1589 register value (duh...)
1591 Fri Aug 30 10:33:49 1996 Jeffrey A Law (law@cygnus.com)
1593 * simops.c: Fix "not1" and "set1".
1595 * simops.c: Don't forget to initialize temp for
1598 * interp.c: Remove various debugging printfs.
1600 * simops.c: Fix satadd, satsub boundary case handling.
1602 * interp.c (hash): Fix.
1603 * interp.c (do_format_8): Get operands correctly and
1604 call the target function.
1605 * simops.c: Rough cut at "clr1", "not1", "set1", and "tst1".
1607 Thu Aug 29 13:53:29 1996 Jeffrey A Law (law@cygnus.com)
1609 * interp.c (do_format_4): Get operands correctly and
1610 call the target function.
1611 * simops.c: Rough cut at "sld.b", "sld.h", "sld.w", "sst.b",
1612 "sst.h", and "sst.w".
1614 * v850_sim.h: The V850 doesn't have split I&D spaces. Change
1615 accordingly. Remove many unused definitions.
1616 * interp.c: The V850 doesn't have split I&D spaces. Change
1618 (get_longlong, get_longword, get_word): Deleted.
1619 (write_longlong, write_longword, write_word): Deleted.
1620 (get_operands): Deleted.
1621 (get_byte, get_half, get_word): New functions.
1622 (put_byte, put_half, put_word): New functions.
1623 * simops.c: Remove unused functions. Rough cut at
1624 "ld.b", "ld.h", "ld.w", "st.b", "st.h", "st.w" insns.
1626 * v850_sim.h (struct _state): Remove "psw" field. Add
1628 (PSW): Remove bogus definition.
1629 * simops.c: Change condition code handling to use the psw
1630 register within the sregs array. Handle "ldsr" and "stsr".
1632 * simops.c: Handle "satadd", "satsub", "satsubi", "satsubr".
1634 * interp.c (do_format_5): Get operands correctly and
1635 call the target function.
1636 (sim_resume): Don't do a PC update for format 5 instructions.
1637 * simops.c: Handle "jarl" and "jmp" instructions.
1639 * simops.c: Fix minor typos. Handle "cmp", "setf", "tst"
1640 "di", and "ei" instructions correctly.
1642 * interp.c (do_format_3): Get operands correctly and call
1643 the target function.
1644 * simops.c: Handle bCC instructions.
1646 * simops.c: Add condition code handling to shift insns.
1647 Fix minor typos in condition code handling for other insns.
1649 * Makefile.in: Fix typo.
1650 * simops.c: Add condition code handling to "sub" "subr" and
1651 "divh" instructions.
1653 * interp.c (hash): Update to be more accurate.
1654 (lookup_hash): Call hash rather than computing the hash
1656 (do_format_1_2): Handle format 1 and format 2 instructions.
1657 Get operands correctly and call the target function.
1658 (do_format_6): Get operands correctly and call the target
1660 (do_formats_9_10): Rough cut so shift ops will work.
1661 (sim_resume): Tweak to deal with format 1 and format 2
1662 handling in a single funtion. Don't update the PC
1663 for format 3 insns. Fix typos.
1664 * simops.c: Slightly reorganize. Add condition code handling
1665 to "add", "addi", "and", "andi", "or", "ori", "xor", "xori"
1666 and "not" instructions.
1667 * v850_sim.h (reg_t): Registers are 32bits.
1668 (_state): The V850 has 32 general registers. Add a 32bit
1669 psw and pc register too. Add accessor macros
1671 * Makefile.in, interp.c, v850_sim.h: Bring over endianness
1672 changes from the d10v simulator.
1674 * simops.c: Add shift support.
1676 * simops.c: Add multiply & divide support. Abort for system
1679 * simops.c: Add logicals, mov, movhi, movea, add, addi, sub
1680 and subr. No condition codes yet.
1682 Wed Aug 28 13:53:22 1996 Jeffrey A Law (law@cygnus.com)
1684 * ChangeLog, Makefile.in, configure, configure.in, v850_sim.h,
1685 gencode.c, interp.c, simops.c: Created.