]> git.ipfire.org Git - thirdparty/linux.git/blob - sound/soc/codecs/wm8960.c
projects / thirdparty / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge branch 'nvme-5.7' of git://git.infradead.org/nvme into block-5.7
[thirdparty/linux.git] / sound / soc / codecs / wm8960.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * wm8960.c -- WM8960 ALSA SoC Audio driver
4 *
5 * Copyright 2007-11 Wolfson Microelectronics, plc
6 *
7 * Author: Liam Girdwood
8 */
9
10 #include <linux/module.h>
11 #include <linux/moduleparam.h>
12 #include <linux/init.h>
13 #include <linux/delay.h>
14 #include <linux/pm.h>
15 #include <linux/clk.h>
16 #include <linux/i2c.h>
17 #include <linux/slab.h>
18 #include <sound/core.h>
19 #include <sound/pcm.h>
20 #include <sound/pcm_params.h>
21 #include <sound/soc.h>
22 #include <sound/initval.h>
23 #include <sound/tlv.h>
24 #include <sound/wm8960.h>
25
26 #include "wm8960.h"
27
28 /* R25 - Power 1 */
29 #define WM8960_VMID_MASK 0x180
30 #define WM8960_VREF 0x40
31
32 /* R26 - Power 2 */
33 #define WM8960_PWR2_LOUT1 0x40
34 #define WM8960_PWR2_ROUT1 0x20
35 #define WM8960_PWR2_OUT3 0x02
36
37 /* R28 - Anti-pop 1 */
38 #define WM8960_POBCTRL 0x80
39 #define WM8960_BUFDCOPEN 0x10
40 #define WM8960_BUFIOEN 0x08
41 #define WM8960_SOFT_ST 0x04
42 #define WM8960_HPSTBY 0x01
43
44 /* R29 - Anti-pop 2 */
45 #define WM8960_DISOP 0x40
46 #define WM8960_DRES_MASK 0x30
47
48 static bool is_pll_freq_available(unsigned int source, unsigned int target);
49 static int wm8960_set_pll(struct snd_soc_component *component,
50 unsigned int freq_in, unsigned int freq_out);
51 /*
52 * wm8960 register cache
53 * We can't read the WM8960 register space when we are
54 * using 2 wire for device control, so we cache them instead.
55 */
56 static const struct reg_default wm8960_reg_defaults[] = {
57 { 0x0, 0x00a7 },
58 { 0x1, 0x00a7 },
59 { 0x2, 0x0000 },
60 { 0x3, 0x0000 },
61 { 0x4, 0x0000 },
62 { 0x5, 0x0008 },
63 { 0x6, 0x0000 },
64 { 0x7, 0x000a },
65 { 0x8, 0x01c0 },
66 { 0x9, 0x0000 },
67 { 0xa, 0x00ff },
68 { 0xb, 0x00ff },
69
70 { 0x10, 0x0000 },
71 { 0x11, 0x007b },
72 { 0x12, 0x0100 },
73 { 0x13, 0x0032 },
74 { 0x14, 0x0000 },
75 { 0x15, 0x00c3 },
76 { 0x16, 0x00c3 },
77 { 0x17, 0x01c0 },
78 { 0x18, 0x0000 },
79 { 0x19, 0x0000 },
80 { 0x1a, 0x0000 },
81 { 0x1b, 0x0000 },
82 { 0x1c, 0x0000 },
83 { 0x1d, 0x0000 },
84
85 { 0x20, 0x0100 },
86 { 0x21, 0x0100 },
87 { 0x22, 0x0050 },
88
89 { 0x25, 0x0050 },
90 { 0x26, 0x0000 },
91 { 0x27, 0x0000 },
92 { 0x28, 0x0000 },
93 { 0x29, 0x0000 },
94 { 0x2a, 0x0040 },
95 { 0x2b, 0x0000 },
96 { 0x2c, 0x0000 },
97 { 0x2d, 0x0050 },
98 { 0x2e, 0x0050 },
99 { 0x2f, 0x0000 },
100 { 0x30, 0x0002 },
101 { 0x31, 0x0037 },
102
103 { 0x33, 0x0080 },
104 { 0x34, 0x0008 },
105 { 0x35, 0x0031 },
106 { 0x36, 0x0026 },
107 { 0x37, 0x00e9 },
108 };
109
110 static bool wm8960_volatile(struct device *dev, unsigned int reg)
111 {
112 switch (reg) {
113 case WM8960_RESET:
114 return true;
115 default:
116 return false;
117 }
118 }
119
120 struct wm8960_priv {
121 struct clk *mclk;
122 struct regmap *regmap;
123 int (*set_bias_level)(struct snd_soc_component *,
124 enum snd_soc_bias_level level);
125 struct snd_soc_dapm_widget *lout1;
126 struct snd_soc_dapm_widget *rout1;
127 struct snd_soc_dapm_widget *out3;
128 bool deemph;
129 int lrclk;
130 int bclk;
131 int sysclk;
132 int clk_id;
133 int freq_in;
134 bool is_stream_in_use[2];
135 struct wm8960_data pdata;
136 };
137
138 #define wm8960_reset(c) regmap_write(c, WM8960_RESET, 0)
139
140 /* enumerated controls */
141 static const char *wm8960_polarity[] = {"No Inversion", "Left Inverted",
142 "Right Inverted", "Stereo Inversion"};
143 static const char *wm8960_3d_upper_cutoff[] = {"High", "Low"};
144 static const char *wm8960_3d_lower_cutoff[] = {"Low", "High"};
145 static const char *wm8960_alcfunc[] = {"Off", "Right", "Left", "Stereo"};
146 static const char *wm8960_alcmode[] = {"ALC", "Limiter"};
147 static const char *wm8960_adc_data_output_sel[] = {
148 "Left Data = Left ADC; Right Data = Right ADC",
149 "Left Data = Left ADC; Right Data = Left ADC",
150 "Left Data = Right ADC; Right Data = Right ADC",
151 "Left Data = Right ADC; Right Data = Left ADC",
152 };
153 static const char *wm8960_dmonomix[] = {"Stereo", "Mono"};
154
155 static const struct soc_enum wm8960_enum[] = {
156 SOC_ENUM_SINGLE(WM8960_DACCTL1, 5, 4, wm8960_polarity),
157 SOC_ENUM_SINGLE(WM8960_DACCTL2, 5, 4, wm8960_polarity),
158 SOC_ENUM_SINGLE(WM8960_3D, 6, 2, wm8960_3d_upper_cutoff),
159 SOC_ENUM_SINGLE(WM8960_3D, 5, 2, wm8960_3d_lower_cutoff),
160 SOC_ENUM_SINGLE(WM8960_ALC1, 7, 4, wm8960_alcfunc),
161 SOC_ENUM_SINGLE(WM8960_ALC3, 8, 2, wm8960_alcmode),
162 SOC_ENUM_SINGLE(WM8960_ADDCTL1, 2, 4, wm8960_adc_data_output_sel),
163 SOC_ENUM_SINGLE(WM8960_ADDCTL1, 4, 2, wm8960_dmonomix),
164 };
165
166 static const int deemph_settings[] = { 0, 32000, 44100, 48000 };
167
168 static int wm8960_set_deemph(struct snd_soc_component *component)
169 {
170 struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
171 int val, i, best;
172
173 /* If we're using deemphasis select the nearest available sample
174 * rate.
175 */
176 if (wm8960->deemph) {
177 best = 1;
178 for (i = 2; i < ARRAY_SIZE(deemph_settings); i++) {
179 if (abs(deemph_settings[i] - wm8960->lrclk) <
180 abs(deemph_settings[best] - wm8960->lrclk))
181 best = i;
182 }
183
184 val = best << 1;
185 } else {
186 val = 0;
187 }
188
189 dev_dbg(component->dev, "Set deemphasis %d\n", val);
190
191 return snd_soc_component_update_bits(component, WM8960_DACCTL1,
192 0x6, val);
193 }
194
195 static int wm8960_get_deemph(struct snd_kcontrol *kcontrol,
196 struct snd_ctl_elem_value *ucontrol)
197 {
198 struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
199 struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
200
201 ucontrol->value.integer.value[0] = wm8960->deemph;
202 return 0;
203 }
204
205 static int wm8960_put_deemph(struct snd_kcontrol *kcontrol,
206 struct snd_ctl_elem_value *ucontrol)
207 {
208 struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
209 struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
210 unsigned int deemph = ucontrol->value.integer.value[0];
211
212 if (deemph > 1)
213 return -EINVAL;
214
215 wm8960->deemph = deemph;
216
217 return wm8960_set_deemph(component);
218 }
219
220 static const DECLARE_TLV_DB_SCALE(adc_tlv, -9750, 50, 1);
221 static const DECLARE_TLV_DB_SCALE(inpga_tlv, -1725, 75, 0);
222 static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1);
223 static const DECLARE_TLV_DB_SCALE(bypass_tlv, -2100, 300, 0);
224 static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1);
225 static const DECLARE_TLV_DB_SCALE(lineinboost_tlv, -1500, 300, 1);
226 static const SNDRV_CTL_TLVD_DECLARE_DB_RANGE(micboost_tlv,
227 0, 1, TLV_DB_SCALE_ITEM(0, 1300, 0),
228 2, 3, TLV_DB_SCALE_ITEM(2000, 900, 0),
229 );
230
231 static const struct snd_kcontrol_new wm8960_snd_controls[] = {
232 SOC_DOUBLE_R_TLV("Capture Volume", WM8960_LINVOL, WM8960_RINVOL,
233 0, 63, 0, inpga_tlv),
234 SOC_DOUBLE_R("Capture Volume ZC Switch", WM8960_LINVOL, WM8960_RINVOL,
235 6, 1, 0),
236 SOC_DOUBLE_R("Capture Switch", WM8960_LINVOL, WM8960_RINVOL,
237 7, 1, 1),
238
239 SOC_SINGLE_TLV("Left Input Boost Mixer LINPUT3 Volume",
240 WM8960_INBMIX1, 4, 7, 0, lineinboost_tlv),
241 SOC_SINGLE_TLV("Left Input Boost Mixer LINPUT2 Volume",
242 WM8960_INBMIX1, 1, 7, 0, lineinboost_tlv),
243 SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT3 Volume",
244 WM8960_INBMIX2, 4, 7, 0, lineinboost_tlv),
245 SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT2 Volume",
246 WM8960_INBMIX2, 1, 7, 0, lineinboost_tlv),
247 SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT1 Volume",
248 WM8960_RINPATH, 4, 3, 0, micboost_tlv),
249 SOC_SINGLE_TLV("Left Input Boost Mixer LINPUT1 Volume",
250 WM8960_LINPATH, 4, 3, 0, micboost_tlv),
251
252 SOC_DOUBLE_R_TLV("Playback Volume", WM8960_LDAC, WM8960_RDAC,
253 0, 255, 0, dac_tlv),
254
255 SOC_DOUBLE_R_TLV("Headphone Playback Volume", WM8960_LOUT1, WM8960_ROUT1,
256 0, 127, 0, out_tlv),
257 SOC_DOUBLE_R("Headphone Playback ZC Switch", WM8960_LOUT1, WM8960_ROUT1,
258 7, 1, 0),
259
260 SOC_DOUBLE_R_TLV("Speaker Playback Volume", WM8960_LOUT2, WM8960_ROUT2,
261 0, 127, 0, out_tlv),
262 SOC_DOUBLE_R("Speaker Playback ZC Switch", WM8960_LOUT2, WM8960_ROUT2,
263 7, 1, 0),
264 SOC_SINGLE("Speaker DC Volume", WM8960_CLASSD3, 3, 5, 0),
265 SOC_SINGLE("Speaker AC Volume", WM8960_CLASSD3, 0, 5, 0),
266
267 SOC_SINGLE("PCM Playback -6dB Switch", WM8960_DACCTL1, 7, 1, 0),
268 SOC_ENUM("ADC Polarity", wm8960_enum[0]),
269 SOC_SINGLE("ADC High Pass Filter Switch", WM8960_DACCTL1, 0, 1, 0),
270
271 SOC_ENUM("DAC Polarity", wm8960_enum[1]),
272 SOC_SINGLE_BOOL_EXT("DAC Deemphasis Switch", 0,
273 wm8960_get_deemph, wm8960_put_deemph),
274
275 SOC_ENUM("3D Filter Upper Cut-Off", wm8960_enum[2]),
276 SOC_ENUM("3D Filter Lower Cut-Off", wm8960_enum[3]),
277 SOC_SINGLE("3D Volume", WM8960_3D, 1, 15, 0),
278 SOC_SINGLE("3D Switch", WM8960_3D, 0, 1, 0),
279
280 SOC_ENUM("ALC Function", wm8960_enum[4]),
281 SOC_SINGLE("ALC Max Gain", WM8960_ALC1, 4, 7, 0),
282 SOC_SINGLE("ALC Target", WM8960_ALC1, 0, 15, 1),
283 SOC_SINGLE("ALC Min Gain", WM8960_ALC2, 4, 7, 0),
284 SOC_SINGLE("ALC Hold Time", WM8960_ALC2, 0, 15, 0),
285 SOC_ENUM("ALC Mode", wm8960_enum[5]),
286 SOC_SINGLE("ALC Decay", WM8960_ALC3, 4, 15, 0),
287 SOC_SINGLE("ALC Attack", WM8960_ALC3, 0, 15, 0),
288
289 SOC_SINGLE("Noise Gate Threshold", WM8960_NOISEG, 3, 31, 0),
290 SOC_SINGLE("Noise Gate Switch", WM8960_NOISEG, 0, 1, 0),
291
292 SOC_DOUBLE_R_TLV("ADC PCM Capture Volume", WM8960_LADC, WM8960_RADC,
293 0, 255, 0, adc_tlv),
294
295 SOC_SINGLE_TLV("Left Output Mixer Boost Bypass Volume",
296 WM8960_BYPASS1, 4, 7, 1, bypass_tlv),
297 SOC_SINGLE_TLV("Left Output Mixer LINPUT3 Volume",
298 WM8960_LOUTMIX, 4, 7, 1, bypass_tlv),
299 SOC_SINGLE_TLV("Right Output Mixer Boost Bypass Volume",
300 WM8960_BYPASS2, 4, 7, 1, bypass_tlv),
301 SOC_SINGLE_TLV("Right Output Mixer RINPUT3 Volume",
302 WM8960_ROUTMIX, 4, 7, 1, bypass_tlv),
303
304 SOC_ENUM("ADC Data Output Select", wm8960_enum[6]),
305 SOC_ENUM("DAC Mono Mix", wm8960_enum[7]),
306 };
307
308 static const struct snd_kcontrol_new wm8960_lin_boost[] = {
309 SOC_DAPM_SINGLE("LINPUT2 Switch", WM8960_LINPATH, 6, 1, 0),
310 SOC_DAPM_SINGLE("LINPUT3 Switch", WM8960_LINPATH, 7, 1, 0),
311 SOC_DAPM_SINGLE("LINPUT1 Switch", WM8960_LINPATH, 8, 1, 0),
312 };
313
314 static const struct snd_kcontrol_new wm8960_lin[] = {
315 SOC_DAPM_SINGLE("Boost Switch", WM8960_LINPATH, 3, 1, 0),
316 };
317
318 static const struct snd_kcontrol_new wm8960_rin_boost[] = {
319 SOC_DAPM_SINGLE("RINPUT2 Switch", WM8960_RINPATH, 6, 1, 0),
320 SOC_DAPM_SINGLE("RINPUT3 Switch", WM8960_RINPATH, 7, 1, 0),
321 SOC_DAPM_SINGLE("RINPUT1 Switch", WM8960_RINPATH, 8, 1, 0),
322 };
323
324 static const struct snd_kcontrol_new wm8960_rin[] = {
325 SOC_DAPM_SINGLE("Boost Switch", WM8960_RINPATH, 3, 1, 0),
326 };
327
328 static const struct snd_kcontrol_new wm8960_loutput_mixer[] = {
329 SOC_DAPM_SINGLE("PCM Playback Switch", WM8960_LOUTMIX, 8, 1, 0),
330 SOC_DAPM_SINGLE("LINPUT3 Switch", WM8960_LOUTMIX, 7, 1, 0),
331 SOC_DAPM_SINGLE("Boost Bypass Switch", WM8960_BYPASS1, 7, 1, 0),
332 };
333
334 static const struct snd_kcontrol_new wm8960_routput_mixer[] = {
335 SOC_DAPM_SINGLE("PCM Playback Switch", WM8960_ROUTMIX, 8, 1, 0),
336 SOC_DAPM_SINGLE("RINPUT3 Switch", WM8960_ROUTMIX, 7, 1, 0),
337 SOC_DAPM_SINGLE("Boost Bypass Switch", WM8960_BYPASS2, 7, 1, 0),
338 };
339
340 static const struct snd_kcontrol_new wm8960_mono_out[] = {
341 SOC_DAPM_SINGLE("Left Switch", WM8960_MONOMIX1, 7, 1, 0),
342 SOC_DAPM_SINGLE("Right Switch", WM8960_MONOMIX2, 7, 1, 0),
343 };
344
345 static const struct snd_soc_dapm_widget wm8960_dapm_widgets[] = {
346 SND_SOC_DAPM_INPUT("LINPUT1"),
347 SND_SOC_DAPM_INPUT("RINPUT1"),
348 SND_SOC_DAPM_INPUT("LINPUT2"),
349 SND_SOC_DAPM_INPUT("RINPUT2"),
350 SND_SOC_DAPM_INPUT("LINPUT3"),
351 SND_SOC_DAPM_INPUT("RINPUT3"),
352
353 SND_SOC_DAPM_SUPPLY("MICB", WM8960_POWER1, 1, 0, NULL, 0),
354
355 SND_SOC_DAPM_MIXER("Left Boost Mixer", WM8960_POWER1, 5, 0,
356 wm8960_lin_boost, ARRAY_SIZE(wm8960_lin_boost)),
357 SND_SOC_DAPM_MIXER("Right Boost Mixer", WM8960_POWER1, 4, 0,
358 wm8960_rin_boost, ARRAY_SIZE(wm8960_rin_boost)),
359
360 SND_SOC_DAPM_MIXER("Left Input Mixer", WM8960_POWER3, 5, 0,
361 wm8960_lin, ARRAY_SIZE(wm8960_lin)),
362 SND_SOC_DAPM_MIXER("Right Input Mixer", WM8960_POWER3, 4, 0,
363 wm8960_rin, ARRAY_SIZE(wm8960_rin)),
364
365 SND_SOC_DAPM_ADC("Left ADC", "Capture", WM8960_POWER1, 3, 0),
366 SND_SOC_DAPM_ADC("Right ADC", "Capture", WM8960_POWER1, 2, 0),
367
368 SND_SOC_DAPM_DAC("Left DAC", "Playback", WM8960_POWER2, 8, 0),
369 SND_SOC_DAPM_DAC("Right DAC", "Playback", WM8960_POWER2, 7, 0),
370
371 SND_SOC_DAPM_MIXER("Left Output Mixer", WM8960_POWER3, 3, 0,
372 &wm8960_loutput_mixer[0],
373 ARRAY_SIZE(wm8960_loutput_mixer)),
374 SND_SOC_DAPM_MIXER("Right Output Mixer", WM8960_POWER3, 2, 0,
375 &wm8960_routput_mixer[0],
376 ARRAY_SIZE(wm8960_routput_mixer)),
377
378 SND_SOC_DAPM_PGA("LOUT1 PGA", WM8960_POWER2, 6, 0, NULL, 0),
379 SND_SOC_DAPM_PGA("ROUT1 PGA", WM8960_POWER2, 5, 0, NULL, 0),
380
381 SND_SOC_DAPM_PGA("Left Speaker PGA", WM8960_POWER2, 4, 0, NULL, 0),
382 SND_SOC_DAPM_PGA("Right Speaker PGA", WM8960_POWER2, 3, 0, NULL, 0),
383
384 SND_SOC_DAPM_PGA("Right Speaker Output", WM8960_CLASSD1, 7, 0, NULL, 0),
385 SND_SOC_DAPM_PGA("Left Speaker Output", WM8960_CLASSD1, 6, 0, NULL, 0),
386
387 SND_SOC_DAPM_OUTPUT("SPK_LP"),
388 SND_SOC_DAPM_OUTPUT("SPK_LN"),
389 SND_SOC_DAPM_OUTPUT("HP_L"),
390 SND_SOC_DAPM_OUTPUT("HP_R"),
391 SND_SOC_DAPM_OUTPUT("SPK_RP"),
392 SND_SOC_DAPM_OUTPUT("SPK_RN"),
393 SND_SOC_DAPM_OUTPUT("OUT3"),
394 };
395
396 static const struct snd_soc_dapm_widget wm8960_dapm_widgets_out3[] = {
397 SND_SOC_DAPM_MIXER("Mono Output Mixer", WM8960_POWER2, 1, 0,
398 &wm8960_mono_out[0],
399 ARRAY_SIZE(wm8960_mono_out)),
400 };
401
402 /* Represent OUT3 as a PGA so that it gets turned on with LOUT1/ROUT1 */
403 static const struct snd_soc_dapm_widget wm8960_dapm_widgets_capless[] = {
404 SND_SOC_DAPM_PGA("OUT3 VMID", WM8960_POWER2, 1, 0, NULL, 0),
405 };
406
407 static const struct snd_soc_dapm_route audio_paths[] = {
408 { "Left Boost Mixer", "LINPUT1 Switch", "LINPUT1" },
409 { "Left Boost Mixer", "LINPUT2 Switch", "LINPUT2" },
410 { "Left Boost Mixer", "LINPUT3 Switch", "LINPUT3" },
411
412 { "Left Input Mixer", "Boost Switch", "Left Boost Mixer" },
413 { "Left Input Mixer", "Boost Switch", "LINPUT1" }, /* Really Boost Switch */
414 { "Left Input Mixer", NULL, "LINPUT2" },
415 { "Left Input Mixer", NULL, "LINPUT3" },
416
417 { "Right Boost Mixer", "RINPUT1 Switch", "RINPUT1" },
418 { "Right Boost Mixer", "RINPUT2 Switch", "RINPUT2" },
419 { "Right Boost Mixer", "RINPUT3 Switch", "RINPUT3" },
420
421 { "Right Input Mixer", "Boost Switch", "Right Boost Mixer" },
422 { "Right Input Mixer", "Boost Switch", "RINPUT1" }, /* Really Boost Switch */
423 { "Right Input Mixer", NULL, "RINPUT2" },
424 { "Right Input Mixer", NULL, "RINPUT3" },
425
426 { "Left ADC", NULL, "Left Input Mixer" },
427 { "Right ADC", NULL, "Right Input Mixer" },
428
429 { "Left Output Mixer", "LINPUT3 Switch", "LINPUT3" },
430 { "Left Output Mixer", "Boost Bypass Switch", "Left Boost Mixer" },
431 { "Left Output Mixer", "PCM Playback Switch", "Left DAC" },
432
433 { "Right Output Mixer", "RINPUT3 Switch", "RINPUT3" },
434 { "Right Output Mixer", "Boost Bypass Switch", "Right Boost Mixer" },
435 { "Right Output Mixer", "PCM Playback Switch", "Right DAC" },
436
437 { "LOUT1 PGA", NULL, "Left Output Mixer" },
438 { "ROUT1 PGA", NULL, "Right Output Mixer" },
439
440 { "HP_L", NULL, "LOUT1 PGA" },
441 { "HP_R", NULL, "ROUT1 PGA" },
442
443 { "Left Speaker PGA", NULL, "Left Output Mixer" },
444 { "Right Speaker PGA", NULL, "Right Output Mixer" },
445
446 { "Left Speaker Output", NULL, "Left Speaker PGA" },
447 { "Right Speaker Output", NULL, "Right Speaker PGA" },
448
449 { "SPK_LN", NULL, "Left Speaker Output" },
450 { "SPK_LP", NULL, "Left Speaker Output" },
451 { "SPK_RN", NULL, "Right Speaker Output" },
452 { "SPK_RP", NULL, "Right Speaker Output" },
453 };
454
455 static const struct snd_soc_dapm_route audio_paths_out3[] = {
456 { "Mono Output Mixer", "Left Switch", "Left Output Mixer" },
457 { "Mono Output Mixer", "Right Switch", "Right Output Mixer" },
458
459 { "OUT3", NULL, "Mono Output Mixer", }
460 };
461
462 static const struct snd_soc_dapm_route audio_paths_capless[] = {
463 { "HP_L", NULL, "OUT3 VMID" },
464 { "HP_R", NULL, "OUT3 VMID" },
465
466 { "OUT3 VMID", NULL, "Left Output Mixer" },
467 { "OUT3 VMID", NULL, "Right Output Mixer" },
468 };
469
470 static int wm8960_add_widgets(struct snd_soc_component *component)
471 {
472 struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
473 struct wm8960_data *pdata = &wm8960->pdata;
474 struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
475 struct snd_soc_dapm_widget *w;
476
477 snd_soc_dapm_new_controls(dapm, wm8960_dapm_widgets,
478 ARRAY_SIZE(wm8960_dapm_widgets));
479
480 snd_soc_dapm_add_routes(dapm, audio_paths, ARRAY_SIZE(audio_paths));
481
482 /* In capless mode OUT3 is used to provide VMID for the
483 * headphone outputs, otherwise it is used as a mono mixer.
484 */
485 if (pdata && pdata->capless) {
486 snd_soc_dapm_new_controls(dapm, wm8960_dapm_widgets_capless,
487 ARRAY_SIZE(wm8960_dapm_widgets_capless));
488
489 snd_soc_dapm_add_routes(dapm, audio_paths_capless,
490 ARRAY_SIZE(audio_paths_capless));
491 } else {
492 snd_soc_dapm_new_controls(dapm, wm8960_dapm_widgets_out3,
493 ARRAY_SIZE(wm8960_dapm_widgets_out3));
494
495 snd_soc_dapm_add_routes(dapm, audio_paths_out3,
496 ARRAY_SIZE(audio_paths_out3));
497 }
498
499 /* We need to power up the headphone output stage out of
500 * sequence for capless mode. To save scanning the widget
501 * list each time to find the desired power state do so now
502 * and save the result.
503 */
504 list_for_each_entry(w, &component->card->widgets, list) {
505 if (w->dapm != dapm)
506 continue;
507 if (strcmp(w->name, "LOUT1 PGA") == 0)
508 wm8960->lout1 = w;
509 if (strcmp(w->name, "ROUT1 PGA") == 0)
510 wm8960->rout1 = w;
511 if (strcmp(w->name, "OUT3 VMID") == 0)
512 wm8960->out3 = w;
513 }
514
515 return 0;
516 }
517
518 static int wm8960_set_dai_fmt(struct snd_soc_dai *codec_dai,
519 unsigned int fmt)
520 {
521 struct snd_soc_component *component = codec_dai->component;
522 u16 iface = 0;
523
524 /* set master/slave audio interface */
525 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
526 case SND_SOC_DAIFMT_CBM_CFM:
527 iface |= 0x0040;
528 break;
529 case SND_SOC_DAIFMT_CBS_CFS:
530 break;
531 default:
532 return -EINVAL;
533 }
534
535 /* interface format */
536 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
537 case SND_SOC_DAIFMT_I2S:
538 iface |= 0x0002;
539 break;
540 case SND_SOC_DAIFMT_RIGHT_J:
541 break;
542 case SND_SOC_DAIFMT_LEFT_J:
543 iface |= 0x0001;
544 break;
545 case SND_SOC_DAIFMT_DSP_A:
546 iface |= 0x0003;
547 break;
548 case SND_SOC_DAIFMT_DSP_B:
549 iface |= 0x0013;
550 break;
551 default:
552 return -EINVAL;
553 }
554
555 /* clock inversion */
556 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
557 case SND_SOC_DAIFMT_NB_NF:
558 break;
559 case SND_SOC_DAIFMT_IB_IF:
560 iface |= 0x0090;
561 break;
562 case SND_SOC_DAIFMT_IB_NF:
563 iface |= 0x0080;
564 break;
565 case SND_SOC_DAIFMT_NB_IF:
566 iface |= 0x0010;
567 break;
568 default:
569 return -EINVAL;
570 }
571
572 /* set iface */
573 snd_soc_component_write(component, WM8960_IFACE1, iface);
574 return 0;
575 }
576
577 static struct {
578 int rate;
579 unsigned int val;
580 } alc_rates[] = {
581 { 48000, 0 },
582 { 44100, 0 },
583 { 32000, 1 },
584 { 22050, 2 },
585 { 24000, 2 },
586 { 16000, 3 },
587 { 11025, 4 },
588 { 12000, 4 },
589 { 8000, 5 },
590 };
591
592 /* -1 for reserved value */
593 static const int sysclk_divs[] = { 1, -1, 2, -1 };
594
595 /* Multiply 256 for internal 256 div */
596 static const int dac_divs[] = { 256, 384, 512, 768, 1024, 1408, 1536 };
597
598 /* Multiply 10 to eliminate decimials */
599 static const int bclk_divs[] = {
600 10, 15, 20, 30, 40, 55, 60, 80, 110,
601 120, 160, 220, 240, 320, 320, 320
602 };
603
604 /**
605 * wm8960_configure_sysclk - checks if there is a sysclk frequency available
606 * The sysclk must be chosen such that:
607 * - sysclk = MCLK / sysclk_divs
608 * - lrclk = sysclk / dac_divs
609 * - 10 * bclk = sysclk / bclk_divs
610 *
611 * If we cannot find an exact match for (sysclk, lrclk, bclk)
612 * triplet, we relax the bclk such that bclk is chosen as the
613 * closest available frequency greater than expected bclk.
614 *
615 * @wm8960_priv: wm8960 codec private data
616 * @mclk: MCLK used to derive sysclk
617 * @sysclk_idx: sysclk_divs index for found sysclk
618 * @dac_idx: dac_divs index for found lrclk
619 * @bclk_idx: bclk_divs index for found bclk
620 *
621 * Returns:
622 * -1, in case no sysclk frequency available found
623 * >=0, in case we could derive bclk and lrclk from sysclk using
624 * (@sysclk_idx, @dac_idx, @bclk_idx) dividers
625 */
626 static
627 int wm8960_configure_sysclk(struct wm8960_priv *wm8960, int mclk,
628 int *sysclk_idx, int *dac_idx, int *bclk_idx)
629 {
630 int sysclk, bclk, lrclk;
631 int i, j, k;
632 int diff, closest = mclk;
633
634 /* marker for no match */
635 *bclk_idx = -1;
636
637 bclk = wm8960->bclk;
638 lrclk = wm8960->lrclk;
639
640 /* check if the sysclk frequency is available. */
641 for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) {
642 if (sysclk_divs[i] == -1)
643 continue;
644 sysclk = mclk / sysclk_divs[i];
645 for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) {
646 if (sysclk != dac_divs[j] * lrclk)
647 continue;
648 for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) {
649 diff = sysclk - bclk * bclk_divs[k] / 10;
650 if (diff == 0) {
651 *sysclk_idx = i;
652 *dac_idx = j;
653 *bclk_idx = k;
654 break;
655 }
656 if (diff > 0 && closest > diff) {
657 *sysclk_idx = i;
658 *dac_idx = j;
659 *bclk_idx = k;
660 closest = diff;
661 }
662 }
663 if (k != ARRAY_SIZE(bclk_divs))
664 break;
665 }
666 if (j != ARRAY_SIZE(dac_divs))
667 break;
668 }
669 return *bclk_idx;
670 }
671
672 /**
673 * wm8960_configure_pll - checks if there is a PLL out frequency available
674 * The PLL out frequency must be chosen such that:
675 * - sysclk = lrclk * dac_divs
676 * - freq_out = sysclk * sysclk_divs
677 * - 10 * sysclk = bclk * bclk_divs
678 *
679 * If we cannot find an exact match for (sysclk, lrclk, bclk)
680 * triplet, we relax the bclk such that bclk is chosen as the
681 * closest available frequency greater than expected bclk.
682 *
683 * @component: component structure
684 * @freq_in: input frequency used to derive freq out via PLL
685 * @sysclk_idx: sysclk_divs index for found sysclk
686 * @dac_idx: dac_divs index for found lrclk
687 * @bclk_idx: bclk_divs index for found bclk
688 *
689 * Returns:
690 * < 0, in case no PLL frequency out available was found
691 * >=0, in case we could derive bclk, lrclk, sysclk from PLL out using
692 * (@sysclk_idx, @dac_idx, @bclk_idx) dividers
693 */
694 static
695 int wm8960_configure_pll(struct snd_soc_component *component, int freq_in,
696 int *sysclk_idx, int *dac_idx, int *bclk_idx)
697 {
698 struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
699 int sysclk, bclk, lrclk, freq_out;
700 int diff, closest, best_freq_out;
701 int i, j, k;
702
703 bclk = wm8960->bclk;
704 lrclk = wm8960->lrclk;
705 closest = freq_in;
706
707 best_freq_out = -EINVAL;
708 *sysclk_idx = *dac_idx = *bclk_idx = -1;
709
710 for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) {
711 if (sysclk_divs[i] == -1)
712 continue;
713 for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) {
714 sysclk = lrclk * dac_divs[j];
715 freq_out = sysclk * sysclk_divs[i];
716
717 for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) {
718 if (!is_pll_freq_available(freq_in, freq_out))
719 continue;
720
721 diff = sysclk - bclk * bclk_divs[k] / 10;
722 if (diff == 0) {
723 *sysclk_idx = i;
724 *dac_idx = j;
725 *bclk_idx = k;
726 return freq_out;
727 }
728 if (diff > 0 && closest > diff) {
729 *sysclk_idx = i;
730 *dac_idx = j;
731 *bclk_idx = k;
732 closest = diff;
733 best_freq_out = freq_out;
734 }
735 }
736 }
737 }
738
739 return best_freq_out;
740 }
741 static int wm8960_configure_clocking(struct snd_soc_component *component)
742 {
743 struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
744 int freq_out, freq_in;
745 u16 iface1 = snd_soc_component_read32(component, WM8960_IFACE1);
746 int i, j, k;
747 int ret;
748
749 if (!(iface1 & (1<<6))) {
750 dev_dbg(component->dev,
751 "Codec is slave mode, no need to configure clock\n");
752 return 0;
753 }
754
755 if (wm8960->clk_id != WM8960_SYSCLK_MCLK && !wm8960->freq_in) {
756 dev_err(component->dev, "No MCLK configured\n");
757 return -EINVAL;
758 }
759
760 freq_in = wm8960->freq_in;
761 /*
762 * If it's sysclk auto mode, check if the MCLK can provide sysclk or
763 * not. If MCLK can provide sysclk, using MCLK to provide sysclk
764 * directly. Otherwise, auto select a available pll out frequency
765 * and set PLL.
766 */
767 if (wm8960->clk_id == WM8960_SYSCLK_AUTO) {
768 /* disable the PLL and using MCLK to provide sysclk */
769 wm8960_set_pll(component, 0, 0);
770 freq_out = freq_in;
771 } else if (wm8960->sysclk) {
772 freq_out = wm8960->sysclk;
773 } else {
774 dev_err(component->dev, "No SYSCLK configured\n");
775 return -EINVAL;
776 }
777
778 if (wm8960->clk_id != WM8960_SYSCLK_PLL) {
779 ret = wm8960_configure_sysclk(wm8960, freq_out, &i, &j, &k);
780 if (ret >= 0) {
781 goto configure_clock;
782 } else if (wm8960->clk_id != WM8960_SYSCLK_AUTO) {
783 dev_err(component->dev, "failed to configure clock\n");
784 return -EINVAL;
785 }
786 }
787
788 freq_out = wm8960_configure_pll(component, freq_in, &i, &j, &k);
789 if (freq_out < 0) {
790 dev_err(component->dev, "failed to configure clock via PLL\n");
791 return freq_out;
792 }
793 wm8960_set_pll(component, freq_in, freq_out);
794
795 configure_clock:
796 /* configure sysclk clock */
797 snd_soc_component_update_bits(component, WM8960_CLOCK1, 3 << 1, i << 1);
798
799 /* configure frame clock */
800 snd_soc_component_update_bits(component, WM8960_CLOCK1, 0x7 << 3, j << 3);
801 snd_soc_component_update_bits(component, WM8960_CLOCK1, 0x7 << 6, j << 6);
802
803 /* configure bit clock */
804 snd_soc_component_update_bits(component, WM8960_CLOCK2, 0xf, k);
805
806 return 0;
807 }
808
809 static int wm8960_hw_params(struct snd_pcm_substream *substream,
810 struct snd_pcm_hw_params *params,
811 struct snd_soc_dai *dai)
812 {
813 struct snd_soc_component *component = dai->component;
814 struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
815 u16 iface = snd_soc_component_read32(component, WM8960_IFACE1) & 0xfff3;
816 bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
817 int i;
818
819 wm8960->bclk = snd_soc_params_to_bclk(params);
820 if (params_channels(params) == 1)
821 wm8960->bclk *= 2;
822
823 /* bit size */
824 switch (params_width(params)) {
825 case 16:
826 break;
827 case 20:
828 iface |= 0x0004;
829 break;
830 case 24:
831 iface |= 0x0008;
832 break;
833 case 32:
834 /* right justify mode does not support 32 word length */
835 if ((iface & 0x3) != 0) {
836 iface |= 0x000c;
837 break;
838 }
839 /* fall through */
840 default:
841 dev_err(component->dev, "unsupported width %d\n",
842 params_width(params));
843 return -EINVAL;
844 }
845
846 wm8960->lrclk = params_rate(params);
847 /* Update filters for the new rate */
848 if (tx) {
849 wm8960_set_deemph(component);
850 } else {
851 for (i = 0; i < ARRAY_SIZE(alc_rates); i++)
852 if (alc_rates[i].rate == params_rate(params))
853 snd_soc_component_update_bits(component,
854 WM8960_ADDCTL3, 0x7,
855 alc_rates[i].val);
856 }
857
858 /* set iface */
859 snd_soc_component_write(component, WM8960_IFACE1, iface);
860
861 wm8960->is_stream_in_use[tx] = true;
862
863 if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_ON &&
864 !wm8960->is_stream_in_use[!tx])
865 return wm8960_configure_clocking(component);
866
867 return 0;
868 }
869
870 static int wm8960_hw_free(struct snd_pcm_substream *substream,
871 struct snd_soc_dai *dai)
872 {
873 struct snd_soc_component *component = dai->component;
874 struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
875 bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
876
877 wm8960->is_stream_in_use[tx] = false;
878
879 return 0;
880 }
881
882 static int wm8960_mute(struct snd_soc_dai *dai, int mute)
883 {
884 struct snd_soc_component *component = dai->component;
885
886 if (mute)
887 snd_soc_component_update_bits(component, WM8960_DACCTL1, 0x8, 0x8);
888 else
889 snd_soc_component_update_bits(component, WM8960_DACCTL1, 0x8, 0);
890 return 0;
891 }
892
893 static int wm8960_set_bias_level_out3(struct snd_soc_component *component,
894 enum snd_soc_bias_level level)
895 {
896 struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
897 u16 pm2 = snd_soc_component_read32(component, WM8960_POWER2);
898 int ret;
899
900 switch (level) {
901 case SND_SOC_BIAS_ON:
902 break;
903
904 case SND_SOC_BIAS_PREPARE:
905 switch (snd_soc_component_get_bias_level(component)) {
906 case SND_SOC_BIAS_STANDBY:
907 if (!IS_ERR(wm8960->mclk)) {
908 ret = clk_prepare_enable(wm8960->mclk);
909 if (ret) {
910 dev_err(component->dev,
911 "Failed to enable MCLK: %d\n",
912 ret);
913 return ret;
914 }
915 }
916
917 ret = wm8960_configure_clocking(component);
918 if (ret)
919 return ret;
920
921 /* Set VMID to 2x50k */
922 snd_soc_component_update_bits(component, WM8960_POWER1, 0x180, 0x80);
923 break;
924
925 case SND_SOC_BIAS_ON:
926 /*
927 * If it's sysclk auto mode, and the pll is enabled,
928 * disable the pll
929 */
930 if (wm8960->clk_id == WM8960_SYSCLK_AUTO && (pm2 & 0x1))
931 wm8960_set_pll(component, 0, 0);
932
933 if (!IS_ERR(wm8960->mclk))
934 clk_disable_unprepare(wm8960->mclk);
935 break;
936
937 default:
938 break;
939 }
940
941 break;
942
943 case SND_SOC_BIAS_STANDBY:
944 if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
945 regcache_sync(wm8960->regmap);
946
947 /* Enable anti-pop features */
948 snd_soc_component_write(component, WM8960_APOP1,
949 WM8960_POBCTRL | WM8960_SOFT_ST |
950 WM8960_BUFDCOPEN | WM8960_BUFIOEN);
951
952 /* Enable & ramp VMID at 2x50k */
953 snd_soc_component_update_bits(component, WM8960_POWER1, 0x80, 0x80);
954 msleep(100);
955
956 /* Enable VREF */
957 snd_soc_component_update_bits(component, WM8960_POWER1, WM8960_VREF,
958 WM8960_VREF);
959
960 /* Disable anti-pop features */
961 snd_soc_component_write(component, WM8960_APOP1, WM8960_BUFIOEN);
962 }
963
964 /* Set VMID to 2x250k */
965 snd_soc_component_update_bits(component, WM8960_POWER1, 0x180, 0x100);
966 break;
967
968 case SND_SOC_BIAS_OFF:
969 /* Enable anti-pop features */
970 snd_soc_component_write(component, WM8960_APOP1,
971 WM8960_POBCTRL | WM8960_SOFT_ST |
972 WM8960_BUFDCOPEN | WM8960_BUFIOEN);
973
974 /* Disable VMID and VREF, let them discharge */
975 snd_soc_component_write(component, WM8960_POWER1, 0);
976 msleep(600);
977 break;
978 }
979
980 return 0;
981 }
982
983 static int wm8960_set_bias_level_capless(struct snd_soc_component *component,
984 enum snd_soc_bias_level level)
985 {
986 struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
987 u16 pm2 = snd_soc_component_read32(component, WM8960_POWER2);
988 int reg, ret;
989
990 switch (level) {
991 case SND_SOC_BIAS_ON:
992 break;
993
994 case SND_SOC_BIAS_PREPARE:
995 switch (snd_soc_component_get_bias_level(component)) {
996 case SND_SOC_BIAS_STANDBY:
997 /* Enable anti pop mode */
998 snd_soc_component_update_bits(component, WM8960_APOP1,
999 WM8960_POBCTRL | WM8960_SOFT_ST |
1000 WM8960_BUFDCOPEN,
1001 WM8960_POBCTRL | WM8960_SOFT_ST |
1002 WM8960_BUFDCOPEN);
1003
1004 /* Enable LOUT1, ROUT1 and OUT3 if they're enabled */
1005 reg = 0;
1006 if (wm8960->lout1 && wm8960->lout1->power)
1007 reg |= WM8960_PWR2_LOUT1;
1008 if (wm8960->rout1 && wm8960->rout1->power)
1009 reg |= WM8960_PWR2_ROUT1;
1010 if (wm8960->out3 && wm8960->out3->power)
1011 reg |= WM8960_PWR2_OUT3;
1012 snd_soc_component_update_bits(component, WM8960_POWER2,
1013 WM8960_PWR2_LOUT1 |
1014 WM8960_PWR2_ROUT1 |
1015 WM8960_PWR2_OUT3, reg);
1016
1017 /* Enable VMID at 2*50k */
1018 snd_soc_component_update_bits(component, WM8960_POWER1,
1019 WM8960_VMID_MASK, 0x80);
1020
1021 /* Ramp */
1022 msleep(100);
1023
1024 /* Enable VREF */
1025 snd_soc_component_update_bits(component, WM8960_POWER1,
1026 WM8960_VREF, WM8960_VREF);
1027
1028 msleep(100);
1029
1030 if (!IS_ERR(wm8960->mclk)) {
1031 ret = clk_prepare_enable(wm8960->mclk);
1032 if (ret) {
1033 dev_err(component->dev,
1034 "Failed to enable MCLK: %d\n",
1035 ret);
1036 return ret;
1037 }
1038 }
1039
1040 ret = wm8960_configure_clocking(component);
1041 if (ret)
1042 return ret;
1043
1044 break;
1045
1046 case SND_SOC_BIAS_ON:
1047 /*
1048 * If it's sysclk auto mode, and the pll is enabled,
1049 * disable the pll
1050 */
1051 if (wm8960->clk_id == WM8960_SYSCLK_AUTO && (pm2 & 0x1))
1052 wm8960_set_pll(component, 0, 0);
1053
1054 if (!IS_ERR(wm8960->mclk))
1055 clk_disable_unprepare(wm8960->mclk);
1056
1057 /* Enable anti-pop mode */
1058 snd_soc_component_update_bits(component, WM8960_APOP1,
1059 WM8960_POBCTRL | WM8960_SOFT_ST |
1060 WM8960_BUFDCOPEN,
1061 WM8960_POBCTRL | WM8960_SOFT_ST |
1062 WM8960_BUFDCOPEN);
1063
1064 /* Disable VMID and VREF */
1065 snd_soc_component_update_bits(component, WM8960_POWER1,
1066 WM8960_VREF | WM8960_VMID_MASK, 0);
1067 break;
1068
1069 case SND_SOC_BIAS_OFF:
1070 regcache_sync(wm8960->regmap);
1071 break;
1072 default:
1073 break;
1074 }
1075 break;
1076
1077 case SND_SOC_BIAS_STANDBY:
1078 switch (snd_soc_component_get_bias_level(component)) {
1079 case SND_SOC_BIAS_PREPARE:
1080 /* Disable HP discharge */
1081 snd_soc_component_update_bits(component, WM8960_APOP2,
1082 WM8960_DISOP | WM8960_DRES_MASK,
1083 0);
1084
1085 /* Disable anti-pop features */
1086 snd_soc_component_update_bits(component, WM8960_APOP1,
1087 WM8960_POBCTRL | WM8960_SOFT_ST |
1088 WM8960_BUFDCOPEN,
1089 WM8960_POBCTRL | WM8960_SOFT_ST |
1090 WM8960_BUFDCOPEN);
1091 break;
1092
1093 default:
1094 break;
1095 }
1096 break;
1097
1098 case SND_SOC_BIAS_OFF:
1099 break;
1100 }
1101
1102 return 0;
1103 }
1104
1105 /* PLL divisors */
1106 struct _pll_div {
1107 u32 pre_div:1;
1108 u32 n:4;
1109 u32 k:24;
1110 };
1111
1112 static bool is_pll_freq_available(unsigned int source, unsigned int target)
1113 {
1114 unsigned int Ndiv;
1115
1116 if (source == 0 || target == 0)
1117 return false;
1118
1119 /* Scale up target to PLL operating frequency */
1120 target *= 4;
1121 Ndiv = target / source;
1122
1123 if (Ndiv < 6) {
1124 source >>= 1;
1125 Ndiv = target / source;
1126 }
1127
1128 if ((Ndiv < 6) || (Ndiv > 12))
1129 return false;
1130
1131 return true;
1132 }
1133
1134 /* The size in bits of the pll divide multiplied by 10
1135 * to allow rounding later */
1136 #define FIXED_PLL_SIZE ((1 << 24) * 10)
1137
1138 static int pll_factors(unsigned int source, unsigned int target,
1139 struct _pll_div *pll_div)
1140 {
1141 unsigned long long Kpart;
1142 unsigned int K, Ndiv, Nmod;
1143
1144 pr_debug("WM8960 PLL: setting %dHz->%dHz\n", source, target);
1145
1146 /* Scale up target to PLL operating frequency */
1147 target *= 4;
1148
1149 Ndiv = target / source;
1150 if (Ndiv < 6) {
1151 source >>= 1;
1152 pll_div->pre_div = 1;
1153 Ndiv = target / source;
1154 } else
1155 pll_div->pre_div = 0;
1156
1157 if ((Ndiv < 6) || (Ndiv > 12)) {
1158 pr_err("WM8960 PLL: Unsupported N=%d\n", Ndiv);
1159 return -EINVAL;
1160 }
1161
1162 pll_div->n = Ndiv;
1163 Nmod = target % source;
1164 Kpart = FIXED_PLL_SIZE * (long long)Nmod;
1165
1166 do_div(Kpart, source);
1167
1168 K = Kpart & 0xFFFFFFFF;
1169
1170 /* Check if we need to round */
1171 if ((K % 10) >= 5)
1172 K += 5;
1173
1174 /* Move down to proper range now rounding is done */
1175 K /= 10;
1176
1177 pll_div->k = K;
1178
1179 pr_debug("WM8960 PLL: N=%x K=%x pre_div=%d\n",
1180 pll_div->n, pll_div->k, pll_div->pre_div);
1181
1182 return 0;
1183 }
1184
1185 static int wm8960_set_pll(struct snd_soc_component *component,
1186 unsigned int freq_in, unsigned int freq_out)
1187 {
1188 u16 reg;
1189 static struct _pll_div pll_div;
1190 int ret;
1191
1192 if (freq_in && freq_out) {
1193 ret = pll_factors(freq_in, freq_out, &pll_div);
1194 if (ret != 0)
1195 return ret;
1196 }
1197
1198 /* Disable the PLL: even if we are changing the frequency the
1199 * PLL needs to be disabled while we do so. */
1200 snd_soc_component_update_bits(component, WM8960_CLOCK1, 0x1, 0);
1201 snd_soc_component_update_bits(component, WM8960_POWER2, 0x1, 0);
1202
1203 if (!freq_in || !freq_out)
1204 return 0;
1205
1206 reg = snd_soc_component_read32(component, WM8960_PLL1) & ~0x3f;
1207 reg |= pll_div.pre_div << 4;
1208 reg |= pll_div.n;
1209
1210 if (pll_div.k) {
1211 reg |= 0x20;
1212
1213 snd_soc_component_write(component, WM8960_PLL2, (pll_div.k >> 16) & 0xff);
1214 snd_soc_component_write(component, WM8960_PLL3, (pll_div.k >> 8) & 0xff);
1215 snd_soc_component_write(component, WM8960_PLL4, pll_div.k & 0xff);
1216 }
1217 snd_soc_component_write(component, WM8960_PLL1, reg);
1218
1219 /* Turn it on */
1220 snd_soc_component_update_bits(component, WM8960_POWER2, 0x1, 0x1);
1221 msleep(250);
1222 snd_soc_component_update_bits(component, WM8960_CLOCK1, 0x1, 0x1);
1223
1224 return 0;
1225 }
1226
1227 static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
1228 int source, unsigned int freq_in, unsigned int freq_out)
1229 {
1230 struct snd_soc_component *component = codec_dai->component;
1231 struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
1232
1233 wm8960->freq_in = freq_in;
1234
1235 if (pll_id == WM8960_SYSCLK_AUTO)
1236 return 0;
1237
1238 return wm8960_set_pll(component, freq_in, freq_out);
1239 }
1240
1241 static int wm8960_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
1242 int div_id, int div)
1243 {
1244 struct snd_soc_component *component = codec_dai->component;
1245 u16 reg;
1246
1247 switch (div_id) {
1248 case WM8960_SYSCLKDIV:
1249 reg = snd_soc_component_read32(component, WM8960_CLOCK1) & 0x1f9;
1250 snd_soc_component_write(component, WM8960_CLOCK1, reg | div);
1251 break;
1252 case WM8960_DACDIV:
1253 reg = snd_soc_component_read32(component, WM8960_CLOCK1) & 0x1c7;
1254 snd_soc_component_write(component, WM8960_CLOCK1, reg | div);
1255 break;
1256 case WM8960_OPCLKDIV:
1257 reg = snd_soc_component_read32(component, WM8960_PLL1) & 0x03f;
1258 snd_soc_component_write(component, WM8960_PLL1, reg | div);
1259 break;
1260 case WM8960_DCLKDIV:
1261 reg = snd_soc_component_read32(component, WM8960_CLOCK2) & 0x03f;
1262 snd_soc_component_write(component, WM8960_CLOCK2, reg | div);
1263 break;
1264 case WM8960_TOCLKSEL:
1265 reg = snd_soc_component_read32(component, WM8960_ADDCTL1) & 0x1fd;
1266 snd_soc_component_write(component, WM8960_ADDCTL1, reg | div);
1267 break;
1268 default:
1269 return -EINVAL;
1270 }
1271
1272 return 0;
1273 }
1274
1275 static int wm8960_set_bias_level(struct snd_soc_component *component,
1276 enum snd_soc_bias_level level)
1277 {
1278 struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
1279
1280 return wm8960->set_bias_level(component, level);
1281 }
1282
1283 static int wm8960_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
1284 unsigned int freq, int dir)
1285 {
1286 struct snd_soc_component *component = dai->component;
1287 struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
1288
1289 switch (clk_id) {
1290 case WM8960_SYSCLK_MCLK:
1291 snd_soc_component_update_bits(component, WM8960_CLOCK1,
1292 0x1, WM8960_SYSCLK_MCLK);
1293 break;
1294 case WM8960_SYSCLK_PLL:
1295 snd_soc_component_update_bits(component, WM8960_CLOCK1,
1296 0x1, WM8960_SYSCLK_PLL);
1297 break;
1298 case WM8960_SYSCLK_AUTO:
1299 break;
1300 default:
1301 return -EINVAL;
1302 }
1303
1304 wm8960->sysclk = freq;
1305 wm8960->clk_id = clk_id;
1306
1307 return 0;
1308 }
1309
1310 #define WM8960_RATES SNDRV_PCM_RATE_8000_48000
1311
1312 #define WM8960_FORMATS \
1313 (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
1314 SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
1315
1316 static const struct snd_soc_dai_ops wm8960_dai_ops = {
1317 .hw_params = wm8960_hw_params,
1318 .hw_free = wm8960_hw_free,
1319 .digital_mute = wm8960_mute,
1320 .set_fmt = wm8960_set_dai_fmt,
1321 .set_clkdiv = wm8960_set_dai_clkdiv,
1322 .set_pll = wm8960_set_dai_pll,
1323 .set_sysclk = wm8960_set_dai_sysclk,
1324 };
1325
1326 static struct snd_soc_dai_driver wm8960_dai = {
1327 .name = "wm8960-hifi",
1328 .playback = {
1329 .stream_name = "Playback",
1330 .channels_min = 1,
1331 .channels_max = 2,
1332 .rates = WM8960_RATES,
1333 .formats = WM8960_FORMATS,},
1334 .capture = {
1335 .stream_name = "Capture",
1336 .channels_min = 1,
1337 .channels_max = 2,
1338 .rates = WM8960_RATES,
1339 .formats = WM8960_FORMATS,},
1340 .ops = &wm8960_dai_ops,
1341 .symmetric_rates = 1,
1342 };
1343
1344 static int wm8960_probe(struct snd_soc_component *component)
1345 {
1346 struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
1347 struct wm8960_data *pdata = &wm8960->pdata;
1348
1349 if (pdata->capless)
1350 wm8960->set_bias_level = wm8960_set_bias_level_capless;
1351 else
1352 wm8960->set_bias_level = wm8960_set_bias_level_out3;
1353
1354 snd_soc_add_component_controls(component, wm8960_snd_controls,
1355 ARRAY_SIZE(wm8960_snd_controls));
1356 wm8960_add_widgets(component);
1357
1358 return 0;
1359 }
1360
1361 static const struct snd_soc_component_driver soc_component_dev_wm8960 = {
1362 .probe = wm8960_probe,
1363 .set_bias_level = wm8960_set_bias_level,
1364 .suspend_bias_off = 1,
1365 .idle_bias_on = 1,
1366 .use_pmdown_time = 1,
1367 .endianness = 1,
1368 .non_legacy_dai_naming = 1,
1369 };
1370
1371 static const struct regmap_config wm8960_regmap = {
1372 .reg_bits = 7,
1373 .val_bits = 9,
1374 .max_register = WM8960_PLL4,
1375
1376 .reg_defaults = wm8960_reg_defaults,
1377 .num_reg_defaults = ARRAY_SIZE(wm8960_reg_defaults),
1378 .cache_type = REGCACHE_RBTREE,
1379
1380 .volatile_reg = wm8960_volatile,
1381 };
1382
1383 static void wm8960_set_pdata_from_of(struct i2c_client *i2c,
1384 struct wm8960_data *pdata)
1385 {
1386 const struct device_node *np = i2c->dev.of_node;
1387
1388 if (of_property_read_bool(np, "wlf,capless"))
1389 pdata->capless = true;
1390
1391 if (of_property_read_bool(np, "wlf,shared-lrclk"))
1392 pdata->shared_lrclk = true;
1393 }
1394
1395 static int wm8960_i2c_probe(struct i2c_client *i2c,
1396 const struct i2c_device_id *id)
1397 {
1398 struct wm8960_data *pdata = dev_get_platdata(&i2c->dev);
1399 struct wm8960_priv *wm8960;
1400 int ret;
1401
1402 wm8960 = devm_kzalloc(&i2c->dev, sizeof(struct wm8960_priv),
1403 GFP_KERNEL);
1404 if (wm8960 == NULL)
1405 return -ENOMEM;
1406
1407 wm8960->mclk = devm_clk_get(&i2c->dev, "mclk");
1408 if (IS_ERR(wm8960->mclk)) {
1409 if (PTR_ERR(wm8960->mclk) == -EPROBE_DEFER)
1410 return -EPROBE_DEFER;
1411 }
1412
1413 wm8960->regmap = devm_regmap_init_i2c(i2c, &wm8960_regmap);
1414 if (IS_ERR(wm8960->regmap))
1415 return PTR_ERR(wm8960->regmap);
1416
1417 if (pdata)
1418 memcpy(&wm8960->pdata, pdata, sizeof(struct wm8960_data));
1419 else if (i2c->dev.of_node)
1420 wm8960_set_pdata_from_of(i2c, &wm8960->pdata);
1421
1422 ret = wm8960_reset(wm8960->regmap);
1423 if (ret != 0) {
1424 dev_err(&i2c->dev, "Failed to issue reset\n");
1425 return ret;
1426 }
1427
1428 if (wm8960->pdata.shared_lrclk) {
1429 ret = regmap_update_bits(wm8960->regmap, WM8960_ADDCTL2,
1430 0x4, 0x4);
1431 if (ret != 0) {
1432 dev_err(&i2c->dev, "Failed to enable LRCM: %d\n",
1433 ret);
1434 return ret;
1435 }
1436 }
1437
1438 /* Latch the update bits */
1439 regmap_update_bits(wm8960->regmap, WM8960_LINVOL, 0x100, 0x100);
1440 regmap_update_bits(wm8960->regmap, WM8960_RINVOL, 0x100, 0x100);
1441 regmap_update_bits(wm8960->regmap, WM8960_LADC, 0x100, 0x100);
1442 regmap_update_bits(wm8960->regmap, WM8960_RADC, 0x100, 0x100);
1443 regmap_update_bits(wm8960->regmap, WM8960_LDAC, 0x100, 0x100);
1444 regmap_update_bits(wm8960->regmap, WM8960_RDAC, 0x100, 0x100);
1445 regmap_update_bits(wm8960->regmap, WM8960_LOUT1, 0x100, 0x100);
1446 regmap_update_bits(wm8960->regmap, WM8960_ROUT1, 0x100, 0x100);
1447 regmap_update_bits(wm8960->regmap, WM8960_LOUT2, 0x100, 0x100);
1448 regmap_update_bits(wm8960->regmap, WM8960_ROUT2, 0x100, 0x100);
1449
1450 i2c_set_clientdata(i2c, wm8960);
1451
1452 ret = devm_snd_soc_register_component(&i2c->dev,
1453 &soc_component_dev_wm8960, &wm8960_dai, 1);
1454
1455 return ret;
1456 }
1457
1458 static int wm8960_i2c_remove(struct i2c_client *client)
1459 {
1460 return 0;
1461 }
1462
1463 static const struct i2c_device_id wm8960_i2c_id[] = {
1464 { "wm8960", 0 },
1465 { }
1466 };
1467 MODULE_DEVICE_TABLE(i2c, wm8960_i2c_id);
1468
1469 static const struct of_device_id wm8960_of_match[] = {
1470 { .compatible = "wlf,wm8960", },
1471 { }
1472 };
1473 MODULE_DEVICE_TABLE(of, wm8960_of_match);
1474
1475 static struct i2c_driver wm8960_i2c_driver = {
1476 .driver = {
1477 .name = "wm8960",
1478 .of_match_table = wm8960_of_match,
1479 },
1480 .probe = wm8960_i2c_probe,
1481 .remove = wm8960_i2c_remove,
1482 .id_table = wm8960_i2c_id,
1483 };
1484
1485 module_i2c_driver(wm8960_i2c_driver);
1486
1487 MODULE_DESCRIPTION("ASoC WM8960 driver");
1488 MODULE_AUTHOR("Liam Girdwood");
1489 MODULE_LICENSE("GPL");
A mirror of Linus' kernel repository